OEM 12c Migrating Software Library

The Software library is configured as OMS Chared file system at /orasrc. I want to move it to another location of same type under /orasrc/oracleaw_lib.
When I run the migrate job it failes for 12 files with errors as follows:
Exception occurred while migrating file: reason=Source file [orasrc//29/BA8F6EC04DA85C3BE0440003BA2CF590] does not exist. Check whether the source location is accessible.
I cannot find the siad file BA8F6EC04DA85C3BE0440003BA2CF590 under /orasrc/29. I did re-import of metadata after deleting all the filws inder /orasrc thinking that it will solve this issue. But even after the successful completion of the reimport of metada job, the migration fails at the same steps. I have 12c running on Solaris 5.10 64 bit platform.
Any idea whatmay be wrong?
Appreciate your time,
Thanks
Radhak

Firstly, you should bookmark the URL below. This is the EM documentation and source of all information you would commonly need.
http://docs.oracle.com/cd/E24628_01/index.htm
For details on migration, check this section in the admin guide:
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/softwarelib.htm#BGBFEEJD

Similar Messages

Load Patches into SW Library on OEM 12c

I have tried to upload serveral patches into OEM Cloud Control 12c software library. Every patch I attempt to upload results in the same error: Invalid Data - Fail to parse the patch metadata file of patch (patch #) uploaded. Check if it is correct. This is on off-line network where I download the patches from support and burn them to CD and air gap them to the offline network. I have extracted the zip file on my local drive and specify "Upload from Local Host"
Any clues?

What version of EM are you using?
The documentation for uploading patches to the software library can be found here:
http://docs.oracle.com/cd/E24628_01/em.121/e27046/pat_mosem_new.htm#BGGCFCBA
According to the doc, you do not need to unzip that patch as you mentioned. You simply specify the location of zip. Also, did you download the patch metadata and specify its location as well ( unless zip contains PatchSearch.xml as specified in doc )?
If this is a version prior to 12.1.0.3, make sure you have the latest available MOS plugin installed.
Regards,
Dave

How to add Software Library Location in OEM 11g to facilitate patching.

Hi,
I'd like to use patching deployment to patch a gold copy oracle home, that is not being actively used.
I'm tryingt to configure the deployment setup and on the screen where it says.
Information
You are adding a Software Library location for the first time. Provisioning Archive (PAR) files in the directories $OMS_ORACLE_HOME/sysman/prov/paf and $OMS_ORACLE_HOME/sysman/admin/deploymentprocedures will be uploaded.
Add a new Software Library by specifying directory location. In case of multiple Oracle Management Service (OMS) setup, specify normal preferred credentials for each host running OMS.
* Software Library Directory Location
when I enter a location , e.g
/oracleinstall/software/oemsoftwarelib
whos persmissions are as follows
drwx------ 2 oracle oinstall 4096 Feb 23 12:25 oemsoftwarelib
I get just get the following
Internal Error has occurred. Check the log file for details.
does anybody know what the problem might be and which log exactly to look in?
thanks

Hi,
You should look at OMS log/trace files in the .../gc_inst/em/EMGC_OMS<n>/sysman/log directory to get clues on the error.
Check Support Note 1156825.1, which documents a similar symptom.
Note that in a multi-OMS environment, the software library location must be readable and writable from all OMS hosts.
Regards,
- Loc

OEM 12c: addition oms failing

I have installed oms (OEM 12c) on primary node but adding oms to another node using the console is failing with the error below.
The nodes are set up with F5 SLB, everything is working okay on the primary node including SLB console etc.
My environment is RHEL6 (6.4) - Linux 2.6.32-358.el6.x86_64.
Step: Execute Command (Failed)
onfig.java:666)
at oracle.sysman.omsca.framework.OMSConfigAssistantDriver.main(OMSConfigAssistantDriver.java:240)
OMSCA-ERR:Bounce OMS failed.
OMSCA-ERR:Post "Deploy and Repos Setup" operations failed. Check the trace file:/opt/oracle/app/oracle/product/WLS11.1.1.6.0/wlserver_11.1/oms/cfgtoollogs/omsca/omsca_20130611103651.log
Add OMS failed
OMS CA recover failed
Error:Can not recover destination oms.
at /tmp/JOB_DEE235C8B339251BE0432A43600AE89B/implConfigDestOMS.pl line 96, <STDIN> line 7.
I will appreciate your assistance.

We see following error in logs-
2013-06-10 16:57:42,481 [EMMetadataServiceDriver:Thread-14] ERROR swlib.txfr - There was an exception while uploading file to fileset with guid=DED4DE838BED4F47E0432A43600A2D55 for path=ouiOnlyPrereqs.pl. Setting the file entry status to ERROR.
oracle.sysman.emSDK.swlib.storage.StorageException: *The filesystem for the library is not correctly configured, or the directory /omsshare/3 could not be accessed.*
Suspecting software library some files are all 0 bytes - this was caused due to a problem with the NFS mount-point where software library is configured. This is a know issue Bug16374229 and fixed in next EM release. For now, support will be updating you how to move forward, also refer-1531166.1

How to tell if you have OEM 12c BP1 installed?

I had OEM 12c installed and attempted to download/apply the Solaris OEM agent software. I ran into the "Below host metric patches are not applied to OMS." error. I discovered this was because I needed BP1.
After 3 days of trying to uninstall OEM, finally got it uninstalled, downloaded OEM 12c w/BP1 and installed it.
Once again, I tried to download/apply the Solaris OEM agent software...and I got the same error message. Very frustrating.
I don't see anything in the "About" pop-up or "emctl status oms" output that actually says a BP has been installed though. Could I have just reinstalled the non-BP version? I got the installations zips directory from the Oracle website that says "Enterprise Manager Cloud Control 12c Release 1 (12.1.0.1) for Linux x86-64
(With Bundle Patch 1)" so I don't think that's the issue. Is there something else I need to do to get BP 1 working??

Few things:
a) If you have linux oms with bp1 and want to deploy solaris agents ( with bp1) then you need to follow the steps from this doc:
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/aix_solaris.htm#CIHJJGDG
You will be required to apply patches on OMS and plugin homes on OMS.
b) If you want to find wether the OMS installed has bp1 or not follow the note: How to Determine if EM Cloud Control 12c with bp1 has Been Installed (Doc ID 1424439.1)

OEM 12c E-Business Suite Plugin Issue

Hello All,
I am currently new to OEM 12c, and I have the latest version installed and running, Version     12.1.0.2.0. So far everything has been running great, and agents have been downloaded and deployed with little to no issues. However, I am now trying to deploy the E-Business Suite Plug-in to the Management Server first, and I receive an error:
Stop management server
     Failed
     November 1, 2012 2:28:25 PM CDT     November 1, 2012 2:28:40 PM CDT     DeployPluginOnPrimaryOMS     emctl.log
When I look further, I see this in the logs:
Starting Prereq check..
Performing Pre config module
Performing Check required patch
Checking mandatory patches for plugin : oracle.apps.ebs:12.1.0.1.0:0
Performing Pre metadata registration
Performing Pre SQL registration
Registering plugin SQLs. Reg file is /u01/software/Middleware/oms/sysman/admin/emdrep/plugininfo/pluginDepList
Completed Prereq check
Starting Deployment
Invoking pre deploy callbacks.
OMS state could be found. It is up
Stopping OMS.
EM-04001: Server side Plug-in deployment failed with message Error while stopping Management Server on host <company.com>: Unable to stop OMS.. Contact Oracle Support*
EM-04026: Server side Plug-in deployment failed due to previous errors. Check log file /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugindeployment_33/configplugin_all_2012-11-01_14-28-12.log on host <company.com> for more details_*
Performing Opss deconfig
Performing Midtier deconfig
Removing synonyms from EMRUNTIME schema
Removing Plugin's DB objects.
Stopping OMS
Starting OMS
OMS Started successfullyDiagnostic log file: /u01/software/Middleware/oms/cfgtoollogs/pluginca/plugin_deployment_33/configplugin_all_2012-11-01_14-28-12.log
For help type emctl plugin deploy -help
I can't seem to find any helpful info on the errors concerning EM-04001 and EM-04026. I did see that there was a bug fix which was required, bug number 13242773. But reading the ReadMe says this is only for OEM version 12.1.0.1.0.
So, my question is, has anyone run into this problem, or have any suggestions on how to get this plug-in deployed successfully?
Thanks in advance for your help.
Edited by: 969006 on Dec 13, 2012 12:25 PM

Hello,
I haven’t run into the same errors you have reported but, let me share with you our recommended way of installing E-Business Suite Plug-in. Start by referencing our “Getting Start” MOS note 1434392.1it contains all the required patches, certification details, and related documentation. Once you are ready to perform the install start out by reviewing Chapter 2 - Installing the Oracle Application Management Pack for Oracle E-Business Suite of our Oracle Application Management Pack for Oracle E-Business Suite Guide Release 12.1.0.1.0. Here is a direct link -http://docs.oracle.com/cd/E24628_01/doc.121/e28715.pdf
If after following the above steps you are still encountering errors then open a Service Request with Oracle Support.
Regards,
Product Management

Convert custom management plug-in in OEM 11g to OEM 12c compatible plug-in

Hi All,
We have a custom plug-in developed and deployed in OEM 11g. We are planning to move to OEM 12c(12.1.0.4) and installing OEM 12c(fresh install) in a new host instead of migrating existing 11g to 12c as part of upgrade process.
Now question is what are the options if I want to use existing 11g custom plug-in in OEM 12c ? As I understand 11g plug-ins are jar file but OEM 12c plug-ins are OPAR files.
Can we export plug-in from OEM 11g and import directly in OEM 12c or if there are any steps to conver 11g plugin to 12c plugin before importing it in 12c.
Please suggest the options available without re-developing the plug-ins for OEM 12c.
Thanks

To overwrite and update your current custom plug-in update that is stored in a repository, use the overwrite option.
$emcli create_custom_plugin_update
-agent_name="agent_name"
-plugin_id="plugin_id"
[-overwrite]
This command creates and imports a custom plug-in update from an existing Management Agent where the selected plug-in is deployed. The custom plug-in update will be used for all subsequent plug-in deployments on any Management Agent, in place of Oracle supplied versions.
Custom plug-in update is created as per plug-in type. If a custom plug-in update is created, and after three days, a patch is applied, in order to include the patch, the custom plug-in update will have to be created again.
$emcli list_custom_plugin_updates
Please refer the below doc for more info..
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/plugin_mngr.htm#CJGCHGIH
Regards
Krishnan

Installation of OEM 12c and DB 12c / repository

Hi,
currently I am using an Oracle DB 11.2.0.1 to get to know Oracle (administration, SQL, PL/SQL) and to prepare for certification.
Now I want to install OEM 12c with Plugin DB 12c because there are many new features that are not covered in 11.2. Therefore I need 11.2.0.3. or an upgrade to 11.2.0.3 as database repository for OEM 12c. But I can not install 11.2.0.3 or upgrade to this version because a support ID is required for download.
How can I install EM 12c and DB 12c for the purpose of learning oracle and testing Oracle related features using my OTN account as usual?
Thanks in advance.
Best regards
Eli

Hi,
@sybrand_b
thanks for your message.
I have already read some documents and the installation of Oracle 12c including EM Express was successful. Then I tried different OEM combinations but ended up in non compatible OEM12c - repositoryDB - DB12c scenarios or would have needed a support ID.
I am slightly confused regarding full versions, updates and plugins, compatible vs incompatible combinations, which OS works for me etc. and try to figure out a sequence of steps that works anyway. And the parts to download are quite big.
The main steps are
1. Installation of repository DB (which one, which OS?)
2. Installation of the latest OEM 12.1.0.3 using the repository DB
3. Oracle DB 12.1.0.3 has to be plugged into OEM
Which software bundles to install OEM 12c incl. DB 12c should and can I download using my OTN Account?
Which OS works best with downloadable versions? Should I use Oracle Linux64 or a different OS or can I use Ubuntu 64 as well?
Best regards
Eli

Creating Installation Media component for Database Provisioning in OEM 12c

When creating installation media to use in a database provisioning procedure, do I have to unzip and rezip Disk 1 and 2 before I load them into OEM? I mean can't I just upload the zip files and tell OEM which is the "Main File" via the drop down box in the "Specify Source" section of the "Select Files" tab of the software library entity page?

Thanks for the answer Courtney. Then may I ask, what is the meaning of that "Main File" selection box on the file page?

Software library not available message

I have tried to reconfigure the em control.
The following error occured:
Software Library has not been setup !
Please configure Software Library and try again.
How do I fix this ?

For setting up the OEM GC software library check:
Oracle® Enterprise Manager Administrator's Guide for Software and Server Provisioning and Patching
http://download.oracle.com/docs/cd/E11857_01/em.111/e16599/infrastructure_setup.htm#BABBFGFG
For manual config check the MOS note I mentioned
Regards
Rob

OEM 12c Installation

Hello Gurus,
I'm trying to install OEM 12c software in my vmware setup. While trying to unzip 3rd part of zip file getting below error, I tried couple of times but still no luck. Please guide me on right software of OEM 12c install [root@ktrac1 OEM_SW_32bit]# unzip V45349-01.zip Archive: V45349-01.zip End-of-central-directory signature not found. Either this file is not a zipfile, or it constitutes one disk of a multi-part archive. In the latter case the central directory and zipfile comment will be found on the last disk(s) of this archive. unzip: cannot find zipfile directory in one of V45349-01.zip or V45349-01.zip.zip, and cannot find V45349-01.zip.ZIP, period.
-Naga

-OEM 12c software is for only 64-bit platforms, so from OTN you can try downloading the software
http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html
Thanks.

Which patch to apply in OEM 12c 12.1.0.4 - PSU or Bundle patch

Hello All,
Could you please help me to understand - which patch to apply in OEM 12c 12.1.0.4 - PSU or Budle patch ? Per doc id - Enterprise Manager 12.1.0.4.0 (PS3) Master Bundle Patch List for Agent and Plug-ins (OMS and Agent side) (Doc ID 1900943.1) -
which of the below mentioned patch to be applied in OMS ?
1> System Patch 12.1.0.4.10 - Patch 20675595 (This is a single Sytem patch that includes all the OMS-Side Plug-in Bundles released this month as well as OMS-side Plug-ins released in previous months.)
or
2> For 12.1.0.4, this is Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT&sourceId=1900943.1&id=20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT&sourceId=1900943.1&aru=20392036 &patch_password=&no_header=020392036 (12.1.0.4.3 PSU). Please refer to Note.1995267.1 for the latest PSU patches available for Oracle Enterprise Manager Cloud Control 12c Release 4 (12.1.0.4).
We recently upagraded our OEM from 12.1.0.2 to 12.1.0.4 with out using software updates option during upgrade, hence none of the PSUs are applied to OEM. Now we want to apply latest OEM patches which fixes all the fixes and bug/securities.
I thought BP will include PSU as well but why does DOC id - 1900943.1 says - NOTE: We recommend that you always apply the most recent quarterly PSU. For 12.1.0.4, this is Patch: https://support.oracle.com/epmos/faces/BugDisplay?parent=DOCUMENT&sourceId=1900943.1&id=20392036https://updates.oracle.com/ARULink/PatchDetails/process_form?parent=DOCUMENT&sourceId=1900943.1&aru=20392036 &patch_password=&no_header=020392036 (12.1.0.4.3 PSU). Please refer to Note.1995267.1 for the latest PSU patches available for Oracle Enterprise Manager Cloud Control 12c Release 4 (12.1.0.4). ??
Please help .

The answer is Yes.
The PSU is core OMS patches (think console, incident rules, notifications, etc.) This gets applied to your OMS ORACLE_HOME (i.e. /u01/app/oracle/mw/oms)
The Plugin System Bundle is a compilation of all the latest plugin patch bundles (So for DB Plugin bundle it contains all the latest DB Plugin fixes). The system patch will apply required patches as necessary, skip what's not.
You can read more about the various patches here -
Patching 101 - The User Friendly Guide to Understanding EM Patches - Courtney Llamas
http://courtneyllamas.com/enterprise-manager-patching-faq/
I highly recommend this note as well. It will help identify exactly what should be applied to the entire EM env.
Applying Enterprise Manager 12c Recommended Patches (Doc ID 1664074.1)

10gR3 Patch Tip - Software Library Configuration

While combing thru the install logs trying to solve my 64bit bug problem I found this:
The provisioning deployment did not succeed as the Software Library has not been setup !
Configure Software Library and execute the below command after the installation.
/opt/app/oracle/oem10gR2/oms10g/bin/PARDeploy -action deploy -parDir /opt/app/oracle/oem10gR2/oms10g/sysman/prov/paf -force
Turns out I needed to configure this directory in OEM.
Click ->Deployments, Provisioning Tab, Administration link.
Last item "Software Library Configuration", Add.
I created a directory on the OMS at $OMS_HOME/software, then added that into the OEM settings.
I ran the command outlined above and it put a bunch of stuff in there - not sure what value it has at this point but it went in clean.
So if you create this prior to the patch, it should also work for you.

Thanks for sharing your experience.

Is it possible to install OEM 12c on a server already running OEM 11g ?

Is it possible to install OEM 12c on a server already running OEM 11g ?
We have a server already running OEM 11g, planning to install OEM 12C on the same server and running it in parallel while we transfer targets one by one to OEM 12c ?
Please let us know, if anyone has any experiences on this.
Thanks,

Hi,
Yes it is allowed to install EM 12c on same host but you need to make sure that the hardware is strong enough to keep both the OMS’es up and running. For production system setup i will not recommend you this approach but if this if for your testing purpose you can install both the OMSes on same host with different repositories.
Your second question is not clear, if your final goal is to have em 12c in your enviro then you can go through the proper EM upgrade method which will take care of all target and history migration. Manually doing all is not supported.
Pls go through this: http://download.oracle.com/docs/cd/E24628_01/index.htm

Targets down one OEM 12c console

I have successfully installed OEM 12c on RHEL6, it is a 3-node using F5 Big IP SLB. OMS is up and running on all three nodes, however the OEM console shows three targets to be down on the first node as seen below.
1. node1:4889_Management_service
2. node1:4889_Management_service_CONSOLE
3. node1:4889_Management_service_PBS
The same three targets are reported up on node2 and node3.
I ran ./emctl status oms -details on all three nodes and the results are the same.
It looks like a false alarm to me. Any ideas?

Hi Bill Wagman,
You can remove the agents and its monitored targets as below:
a. On the agent machine, stop the agent if running.
b. On the OMS machine, run the following:
1. Ensure emcli is configured:
<12c_OMS_HOME>/bin>./emcli setup
2. Login to emcli:
<12c_OMS_HOME>/bin>./emcli login -username=SYSMAN
3. Remove the problematic agents from console:
<12c_OMS_HOME>/bin>./emcli delete_target -name="<agent machine name:port>" -type="oracle_emd" -delete_monitored_targets -async
To delete a specific target, you can use the following command:
<12c_OMS_HOME>/bin>./emcli delete_target -name="<target_name>" -type="<target_type>"
Once the agent is removed from console, you can use the following note to deinstall agent software from agent machine:
Note 1368088.1 - How to De-install the Enterprise Manager Cloud Control 12c Agent
Note: The steps in the note 454081.1 is not applicable for 12c agents. It is not recommended to update repository objects manually.
Regards,
Anandu

OEM 12c Migrating Software Library

Similar Messages

Maybe you are looking for