OEM 2.2 not discovering nodes

Between the space of 2 days, OEM has chosen to not
refresh/drop/discover any nodes. It tries to but stalls out
at "Discovery Wizard, step 2 of 2: Progress" at 96%. It is 96%
for all nodes, remote and local. If allowed to sit long enough,
the OMS service will shutdown. Is it possible to force manual
configuration of the nodes without going thru the Discovery
Wizard first?

Hi
I am not aware whether you can force manual discovery without
going through Discover Nodes process. You can, however, stop the
agent and do discovery. This might (I hope) expedite the
discovery process and lead you to manual discovery quickly.
BTW with a manual discovery you lose major functionality of OEM
sarath

Similar Messages

OEM V2.2/will not discover database

Hello,
I am using oracle 8i database in windows nt environment. When in OEM, the discovery services will see the node that database is loaded and running on, but will not discover the database. I can manually configure the database, but the config is using the wrong instance (orcl) instead of webar. I have checked tnsnames.ora, sql.net, listener.ora and can find nothing wrong. I can connect to the database no problem. OEM is the only software that has a problem. Is there a configuration file for the Intelligent Agent? Am I missing something else?
Thanks for the help.
Sue Misslbeck

I am not getting any error at all. It will discover the node (ora1) where the database resides, however, it will not show a database folder for this node.
Should I be getting an error message?
Thanks.
Sue

RAC11.2 EMGC 11.1 node did not discover ASM

Hi,
we installed a two node RAC with ASM and grid infrastructure on OEL. On system level grid and db runs fine.
#>crsctl stat res -t --> all ok.
We deploy the agents form EMGC 11.1the installation was finish successfully.
On node one the agent discover all components form the node...host, +ASM1, LISTENER_node1, SCANS1,2
But on node two the agent did not discover +ASM2 and the LISTENER_node2.
All Passwords are the same on both nodes and provided to the EMGC11.1
In configuration tab in EMGC 11.1 all installations are found
Oracle Database 11g 11.2.0.2.0     /u01/app/oracle/product/11.2.0/dbhome_1 (OraDb11g_home1)     Jun 9, 2011 1:26:07 PM GMT
Oracle Grid Infrastructure 11.2.0.2.0     /u01/app/11.2.0/grid (Ora11g_gridinfrahome1)     Jun 9, 2011 12:23:31 PM GMT
Oracle Management Agent 11.1.0.1.0     /u01/app/oracle/product/agent11g (agent11g1)     Jun 14, 2011 1:14:26 PM GMT
node2 #>emctl status agent ---> agent OK heartbeat to OMS --> 2011-06......
Does anyone can help to find why the agent on node2 don´t find all components. Or how to tell agent to rediscover everything.
Thanks
*T

have you installed the agent in clustermode?
I can't tell you the reason why one agent has discovered the node completely and why the other hasnt't. Please compare the file target.xml (.../sysman/emd) from the fully discovered node with the the file target.xml of the other node. Do both contain the same amount of targets?
If not, you may edit this file on the node where the targets are missing (but be careful: you have ASM1 on node#1 and ASM2 on node #2).
And you certainly have to replace the hostname from node #1 with host-name of node #2. But before editing this file please shutdown the
agent and restart them afterwards. I know that this way is not supported or recommended by Oracle - but I have done that before and it worked
fine.
If you want to figure out why the targets on one node haven't been discovered please check the logfiles under .../sysman/log. Maybe you
find a reason. Any you could try "emctl stop agent", "emctl clearstate agent" and "emctl start agent"...

Oem auto discovery does not discover

Hello, DBAers; RHEL 5 x64, Oracle Enterprise Manager 12.1.0.3 - trying to discover an unmanaged host using auto discovery and following the instructions spelled out here
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/discovery.htm#EMADM13119
and the auto discovery is not discovering.
I can "ssh <usrname>@<hostname>" and connect to the unmanaged target from the machine running the management server and ping the target server from same, so it does not appear to be a firewall issue. But OEM cannot see it through auto-discovery. Do any of you have any thoughts?
Humbly,

To be able to run auto-discovery,
the Sudo Privilege Delegation must be set on the Management Agent host that will perform the scan. The named credential that will be used must be configured to run as root.
Because it used nmap (port scanner). Have you checked that sudo privilege delegation is set?

Agent Up and Running, uploading, but host not discovered

We recently rebooted one node in a two node RAC. When it came up we were having problems getting information in Enterprise manager. The agent comes up, uploads successfully and everything seem fine, but no updates in EM. We removed the host and all associated targets and tried reconfiguring and now EM cannot discover the host. It sees the agent, but not the host. What could have possibly gone wrong? This was all working fine before the reboot.
Agent Version : 10.1.0.5.1
OMS Version : 10.2.0.5.0
Protocol Version : 10.1.0.2.0
Database version is 10.1.0.3
Running on Red Hat Linux Itanium 3.2.3-47
Targets.xml is empty now on this node.
Edited by: user8720546 on Mar 17, 2010 2:55 PM

Hi Erika,
still agent is not discovering by the host. Please find the details command output. During agent upload i am getting error.
bash-3.2$ ./agentca -d
Stopping the agent using /opt/oracle/OracleHomes/agent10g/bin/emctl stop agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Stopping agent ... stopped.
Running agentca using /opt/oracle/OracleHomes/agent10g/oui/bin/runConfig.sh ORACLE_HOME=/opt/oracle/OracleHomes/agent10g ACTION=Configure MODE=Perform RESPONSE_FILE=/opt/oracle/OracleHomes/agent10g/response_file RERUN=TRUE INV_PTR_LOC=/opt/oracle/OracleHomes/agent10g/oraInst.loc COMPONENT_XML={oracle.sysman.top.agent.10_2_0_1_0.xml}
Perform - mode is starting for action: Configure
Perform - mode finished for action: Configure
You can see the log file: /opt/oracle/OracleHomes/agent10g/cfgtoollogs/oui/configActions2010-03-23_01-50-58-PM.log
bash-3.2$ ./emctl clearstate agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD clearstate completed successfully
bash-3.2$ ./emctl upload agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
EMD upload error: uploadXMLFiles skipped :: OMS version not checked yet..
bash-3.2$ ./emctl status agent
Oracle Enterprise Manager 10g Release 5 Grid Control 10.2.0.5.0.
Copyright (c) 1996, 2009 Oracle Corporation. All rights reserved.
Agent Version : 10.2.0.5.0
OMS Version : 10.2.0.5.0
Protocol Version : 10.2.0.5.0
Agent Home : /opt/oracle/OracleHomes/agent10g
Agent binaries : /opt/oracle/OracleHomes/agent10g
Agent Process ID : 6598
Parent Process ID : 6582
Agent URL : https://kanlddev6201a.us.oracle.com:3872/emd/main/
Repository URL : https://idcovms1c.idc.oracle.com:1159/em/upload
Started at : 2010-03-23 13:52:14
Started by user : bpatra
Last Reload : 2010-03-23 13:52:14
Last successful upload : (none)
Last attempted upload : (none)
Total Megabytes of XML files uploaded so far : 0.00
Number of XML files pending upload : 342
Size of XML files pending upload(MB) : 40.36
Available disk space on upload filesystem : 31.31%
Last attempted heartbeat to OMS : 2010-03-23 13:53:29
Last successful heartbeat to OMS : unknown
Agent is Running and Ready

Database is not discovered.

I've added 2 new database targets in Grid Control. One of the targets is used as primary database and the other one is physical standby. Data guard configuration is set manually and is working well. However when i click "Verify Configuration" in Grid Control i get the error "Database is not discovered". Also, performance overview is reporting this error "Unable to obtain Agent location for target <my target name>. You may not currently be logged in."
Any idea why is this happening?

I solved my problem. The data guard from OEM now dicovers both databases. I'm not sure what caused the problem, but i think it was the naming of databases inside dataguard broker and OEM. Because my dataguard configuration was done through SQL and command line broker.
What i did now was, removed standby database from broker configuration in OEM, and added it again. Performed switchover and did the same thing again with other database. This way broker database configuration got new property that can be seen with "show database" command inside broker command line. Property name is "OEM Name:", and it wasn't there before i added standby database through OEM.
I hope this helps.

Dynamics AX 2009 MP - Batch Job Not Discovered

Looking for ideas to resolve issue where Batch Jobs are not discovered and viewable in OpsConsole.
Confirmed the RunAsAccount is a member of local Administrators group on each DAX node and read access on the DynamicsAX database. Also enabled monitors for Batch Tasks and Users and waited a day for discovery to run at 12am. Do not see any objects under
Batch Job/Tasks/Users State Views. Application Object Server state is monitored but state of Application Object Server Computers is not monitored.
Around the time I enabled Batch Job monitoring, events 4502, 1103 and 31400 began.
I do not understand the MP reference: "Batch jobs are displayed only when the user who created the job is currently connected to an AOS instance."
Any help or ideas would be greatly appreciated, thanks.
A module of type "Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.GroupCalculationModule" reported an exception Microsoft.EnterpriseManagement.Common.DataAccessLayerException: Invalid property name: IsDynamicsInstalledAttribute_D07CDD43_9CEF_478E_B319_44D7528A2843
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.GetColumnDefinitionForProperty(String propertyName, QueryDefinition queryDefinition, IList`1 projectedColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ResolveColumnForProperty(ICriteriaContext criteriaContext, XmlReader criteriaReader, Nullable`1 typeContextId, IList`1 projectedColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParsePredicateWithProperty(ICriteriaContext criteriaContext, Nullable`1 typeContextId, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParsePredicate(ICriteriaContext criteriaContext, Nullable`1 typeContextId, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.ParameterizedCriteriaBuilder.ParseCriteria(ICriteriaContext criteriaContext, Nullable`1 managedTypeIdContext, XmlReader criteriaReader)
   at Microsoft.EnterpriseManagement.DataAccessLayer.SqlCommandBuilder.CreateWhereClauseFromCriteria(ICriteriaContext criteriaResolver, String criteriaXml, IList`1 internalColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.SqlCommandBuilder.CreateCriteria(ICriteriaContext criteriaResolver, String criteriaXml, Dictionary`2 parameterValues, IList`1 conditionalRequiredParams, IList`1 internalColumnDefinitions)
   at Microsoft.EnterpriseManagement.DataAccessLayer.QueryRequest.CreateSqlCommandForSelectType()
   at Microsoft.EnterpriseManagement.DataAccessLayer.QueryRequest.Execute(SqlNotificationRequest sqlNotificationRequest)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.QueryGenerator.ExecuteSnapshotQuery(MembershipRule membershipRule, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.EligibleBySnapshotResults(MembershipRule membershipRule, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.ExpressionEvaluatorForSnapshot.GetRelationshipChangesForSnapshot(MembershipRule membershipRule, Guid groupInstanceId, Guid groupTypeId, Guid relationshipId, IList`1 groupKeyNameValuePairs,
DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateSnapshot(MembershipSubscription subscription, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateDifference(MembershipSubscription membershipSubscription, List`1 membershipChanges, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipRuleEvaluator.EvaluateDifference(MembershipSubscription subscription, DatabaseConnection databaseConnection)
   at Microsoft.EnterpriseManagement.Mom.DatabaseQueryModules.MembershipCalculationManager.SnapshotCalculation(MembershipSubscription membershipSubscription, DatabaseConnection databaseConnection) which was running as part of rule "Microsoft.Dynamics.AX.Management.Pack.DynamicsServer.Group.DiscoveryRule"
running for instance "Microsoft Dynamics AX 2009 Computers Group" with id:"{B20E0F37-C8D3-AFCC-E21E-473B019FD826}" in management group "PRESTOPROD".

HI,
It seems a known issue with Dynamics AX 2009 MP. Sorry for the inconvenience.
http://blogs.technet.com/b/operationsmgr/archive/2009/06/23/known-issues-with-the-microsoft-dynamics-ax-2009-management-pack-for-systems-center-operations-manager-2007.aspx
Niki Han
TechNet Community Support

Thunderbolt display: devices not discovered after using Mini DisplayPort–to–VGA adapter

I have an interested problem related to using my MacBook Air in clamshell (closed) mode, connected to a Thunderbolt display. The problem appears to be related to moving my MacBook air between my office and my home.
At the office, I use the MacBook Air with an external VGA display, connected via the Mini DisplayPort–to–VGA adapter. At home, I use the MacBook Air together with a Thunderbolt display. An Apple USB keyboard is also connected to the display.
Mini DisplayPort–to–VGA adapter implicated
The following sequence of events causes the problem to occur:
Use the MacBook air (open) together with a VGA display, connected via a Mini DisplayPort–to–VGA adapter (depicted at right);
Put the MacBook Air to sleep by closing the lid, and disconnect the Mini DisplayPort–to–VGA adapter (I am not sure if the order of these two steps is significant—I usually perform them almost simultaneously when packing up my MacBook Air and getting ready to leave the office); and
With the MacBook Air still closed, connect it to a Thunderbolt display with a connected USB keyboard.
At this point, I would expect to be able to wake up the MacBook Air by tapping on the space bar of the keyboard. However, what I have observed is that this does not wake the MacBook Air.
I can wake the MacBook however by moving or clicking a Bluetooth mouse that is paired with the MacBook Air.
At this point, although the MacBook Air is awake, and the display is working, the USB keyboard connected to the display still does not work. This is the problem, in a nutshell.
Unplugging the USB keyboard from the display, and plugging it back in causes the MacBook Air properly to identify the keyboard.
I used Apple System Profiler to save a list of identified devices at two points in time:
Immediately after waking the MacBook Air by moving the Bluetooth mouse (at which point the USB keyboard was not working); and
After unplugging and plugging in again the USB keyboard (at which point the USB keyboard worked fine).
Many devices are enumerated in the second list that are missing from the first. For example:
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378ef, !registered, !matched, inactive, busy 3 (37993 ms), retain 6>
AppleUSBHub <class AppleUSBHub, id 0x1000378f2, !registered, !matched, inactive, busy 1 (37987 ms), retain 6>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378f4, !registered, !matched, inactive, busy 1 (37986 ms), retain 6>
Keyboard Hub@fe110000 <class IOUSBHubDevice, id 0x1000378f6, registered, matched, active, busy 0 (7 ms), retain 10>
AppleUSBHub <class AppleUSBHub, id 0x1000378f9, registered, matched, active, busy 0 (1 ms), retain 9>
IOUSBInterface@0 <class IOUSBInterface, id 0x1000378fb, !registered, !matched, active, busy 0, retain 7>
Apple Keyboard@fe112000 <class IOUSBDevice, id 0x1000378fd, registered, matched, active, busy 0 (112 ms), retain 11>
and many child devices…
Using the Mini DisplayPort–to–VGA adapter appears to be a necessary step to causing this problem to occur. If I merely disconnect the MacBook Air from the display, let it go to sleep, and then reconnect it again, the USB keyboard will work immediately and can be used to wake the computer from sleep.
Some devices are discovered even when the computer is in sleep mode. This is how it should work.
The problem appears to be that when a Mini DisplayPort–to–VGA adapter has been used since the last time the computer was connected to a Thunderbolt display, the MacBook air does not discover devices completely when it is again connected to the Thunderbolt display while in sleep mode.
Can anyone else reproduce this problem?

Hi glraczon.support,
It sounds like the external display you are using (projector) operates at a smaller resolution than your MacBook Pro. You may want to configure the display preferences in System Preferences for the external projector.
Here is an article that may help you with that process:
OS X Mountain Lion: About the Display pane of System Preferences
http://support.apple.com/kb/HT5369
Thanks,
Matt M.

How to not display nodes in a tree if Oracle roles are NOT used?

How to not display nodes in a tree if Oracle roles are NOT used?
We don't use Oracle DB roles to grant users access to Forms from the menu. We use a template and role system of our own. Basically a few tables with templates and roles.
We want to convert our normal Forms menu to a tree menu and one of our key requirements is that when the tree is populated ONLY nodes with programs (i.e. forms) he has been granted to execute is shown.
Since we don't use Oracle Roles how to do this in a tree?
I created a function to show/hide LEAF nodes, BUT problem is that there are sub-menu nodes showing even if the leaf-nodes under it has not being displayed. My function has suppressed it.
My tree query is like this:
SELECT
     t.status, LEVEL, t.label, t.icon, t.node VALUE
FROM
     tma_tree_menu t
WHERE
tma_authenticate_sys_chk_role(USER, t.node) = 1
CONNECT BY
     PRIOR t.node = t.master
START WITH
     t.MASTER IS NULL
ORDER SIBLINGS BY
t.position
The tma_authenticate_sys_chk_role will return 1 only if the user has access to the form under that node.
I tried the FTree functions in Forms but even that has nothing.
Any help would be greatly appreciated.
Edited by: Channa on Mar 17, 2010 6:49 AM

Would you share the source code? I guess what I need is how exactly you retreive the user credentials from the DB table and set that boolean variable.
and then how to condition it in UIX?

2014 Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8

Why is Airdrop on my new Macbook Pro 10.9.5 not discovering my iPhone 5s iOS8.0.2
Bluetooth on.
On same wireless home network.
Selected Airdrop to everyone on my iPhone 5s.
Macbook Pro was bought in August still not discovering my iphone. Airdrop icon in Finder just keeps spinning.
I'm signed into my Apple ID on the both devices. My admin login account for my Macbook is also connected to my Apple ID.
If only i could transfer selected photos to my Macbook!
Help!

Hi there Musicoshi,
It looks like this feature will be avlaible in OS X Yosemite later this fall. Take a look at the page below for more information.
Apple - OS X Yosemite - Apps
With AirDrop, sharing ﬁles has never been easier.
AirDrop makes sharing your files between Mac computers simple. And now it works between Mac and iOS, too. So with just a few clicks on your Mac, you can take a file from any folder and use AirDrop to send it to a nearby Mac or iOS device. It’s perfect for, say, sharing a document with a coworker in the next room or sending a presentation to a client across the table.
-Griff W.

My iphone 5 is not discovered ssid wifi

my iphone 5 is not discovered ssid wifi in near of ap, but most very near of ap why ???? my ios v 6.0.2 but not currect work

Try restarting the iPhone and power cycling the router.
Is the network broadcasting the Wi-Fi address? Do you see any errors when trying to join the network?
Also, take a look at this Apple doc -> iOS: Troubleshooting Wi-Fi networks and connections

Mine is not a question but I received the solution to the iphone 4s not discovering bluetooth, you hold the top button and the home button until the apple logo comes up and then let it reboot, put your bluetooth in pairing mode, and then turn on bluetooth

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

My new iphone 4s would not discover bluetooth. I called apple, and the guy was great!!! He told me to hold the top button and the home button together and do not let go until the apple logo came up, this would do a hard reset. Then when it reboots, you turn on your bluetooth in paring mode, and then turn on the bluetooth on your iphone 4s and it will find your bluetooth device. Simple, yet it works!!! Hope this helps those of you having the same problem I was having trying to connect your bluetooth.

SQL Server 2012 Express Instance is Not Discovered

I have a single SQL Server 2012 Express instance that is the backend database for a small door security application. I just noticed after having deployed the OpsMgr agent months ago that it never discovered the SQL instance. The SQL instance
is, as stated, Express, and it's the only Express instance I have. Is that why it is not discovered? All the documentation I found seems to indicate the opposite -- that Express is discovered and there are steps you can take to exclude Express
instances. I have no overrides set to exclude any instance or any database.
- System Center Operations Manager 2012 RTM (no SP1, no R2)
- SQL Server 2012 MP version 6.3.173.1
- SQL Server is Windows Server 2012
- SQL Server 2012 Express running on a Hyper-V VM. Instance is named DOORSERVER\Eclipse
- Agent is installed and other discoveries seem to be working fine
- No discovery errors in the event log related to SQL, although there is one about the Windows Server 2008 discovery not being able to start, but I'm on Windows Server 2012, so I am guessing that's okay?
- No overrides are set on the discovery
- Discovery has found every other SQL Server 2012 instance (standard and enterprise editions)

Well, just realized I didn't have the latest MP. Upgrading to 6.4.1.0 version of the SQL MP fixed the discovery issue.

'PERSON is not a node of logical database PNP'

Hi All,
           We are upgrading from 4.6 to ECC6.00.Previously we used the include RPCIPE0D with PNP database in one of the programs and had no errors.Now in ECC6.0,there is a huge change in the code of RPCIPE0D when compared to 4.6C.
           When i use this include in one of my programs with PNP database it throws an error as "'PERSON is not a node of logical database PNP'".Do i have to use PNPCE?If so,plz explain why.

Hi Shruthi,
          Main Program RPCIPE00 of your include program RPCIPE0D is built with the Logical Database PNPCE which has the node PERSON. When you try to activate your custom program with your program as main program, Since the include has the following code in it.
NODES: person, group.
this node will be checked against the LDB provided in your Custom Program.
Regards
S. Balasubramanian

My apple TV is not discovering my devices. what do i do?

my apple TV is not discovering my devices. what do i do?

If you are referring to airplay
http://support.apple.com/kb/TS4215?viewlocale=en_US&locale=en_US

OEM 2.2 not discovering nodes

Similar Messages

Maybe you are looking for