OEM Agent mass deployment issue

I installed Oracle OEM Grid 11g on Red Hat Linux 5.2. And I want to monitor all my databases which is in HP-UX server. So I was trying to install Agent using Agent deployment wizard.
- I downloaded Agent using Grid control its stored under "<OMS_HOME>/sysman/agent_download/11.1.0.1.0/" (default location), but in the document it says the default location would be "<OMS_HOME>/sysman/agent_download/11.1.0.1.0/<platform>", but i don't see the version here.
- when i try to install the agent, in platform dropdown menu only Linux is there, I am not seeing HP-UX.
can some one help me to understnad what i am missing.
- Mano

Hi,
Plz go to edelivery.oracle.com and select product oracle enterprize manager and select product hp unix and you will find oem download over there.
Hope this might help you.
Thanks,
Vishal Joshi
Oracle Apps DBA

Similar Messages

OEM agent deployment : Status=255

Hi,
I am deploying OEM Agent 10.2.0.2.0 on Linux (32-bit). As first installation was failed because of permission issue, I tried to reinstall it. I ended with this error :
Initializing Java Virtual Machine from /tmp/OraInstall2007-02-26_03-45-43PM/jre/1.4.2/bin/java. Please wait...
Completed with Status=255
I tried to delete old installed folder but still same.
Can anyone help in resolving this?
Thanks in adv.

I am following the orale documentation, the link is following:
http://download-west.oracle.com/docs/cd/B14099_19/manage.1012/b16228/deploying_the_management_agent.htm#CIHEJIJC
I installed agents on 3 other Linux (64 bit) successfully. But this time it is giving error. This time I have applied OEM plug-in where OEM is installed to monitor Oracle Application server and after that tried to deploy an agent on host. First time the link, setup was successful but at the end it suggested to change the permission os an .xml file. after doing that I end up with the error. It seems some cleanup issue. Pl. give your suggestions...
Thanks

OEM mass deploy across multiple platforms

Our OEM is on redhat linux, our databases are on solaris. When I go to download patches I have to download different versions for the different OS's? I need to patch a host of Grid Control agenst on about 15 servers. It would be easier if I could mass deploy these.
The download script does not work, since the download directories have OS version names.

the OS software version is differnet also. Its not going to compile. That is just one example. I am hoping there is a download of multiple versions of unix/linux and I can mass deploy them through the network.

TimeZone issues when starting the OEM Agent since summertime switch Germany

Hello gurus,
since yesterday when the system time has swithched to summer time in Germany I have below errors when starting the agents on our systems:
****@*****: /oracle > su - ora*** -c /oracle/product/agent10g/bin/emctl start agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Starting agent ....... failed.
The agentTZRegion value in /oracle/product/agent10g/sysman/config/emd.properties is not in agreement with what agent thinks it should be.Please verify your environment to make sure that TZ setting has not changed since the last start of the agent.
If you modified the timezone setting in the environment, please stop the agent and exectute 'emctl resetTZ agent' and also execute the script mgmt_target.set_agent_tzrgn(<agent_name>, <new_tz_rgn>) to get the value propagated to repository.
Consult the log files in: /oracle/product/agent10g/sysman/log
So I tryed the suggested resetTZ, but get below errors:
root@******: /oracle/product/agent10g/sysman/log > su - oradeu -c /oracle/product/agent10g/bin/emctl resetTZ agent
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
Updating /oracle/product/agent10g/sysman/config/emd.properties...
----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
----- Mon Mar 31 10:18:48 2008::trying again after waiting for 1 sec to account for daylight transition
----- Mon Mar 31 10:18:48 2008::tzOffset for +01:00 is 60(min), but agent is runnning with tzOffset 120(min)
resetTZ failed.
The agentTZRegion in:
/oracle/product/agent10g/sysman/config/emd.properties
is not in agreement with what the agent thinks it should be.
Fix your environment.
Pick a TZ value that corresponds to time zone settings listed in:
/oracle/product/agent10g/sysman/admin/supportedtzs.lst
I checked the TZ settings:
*****> echo $TZ
MEZ-1MSZ,M3.5.0/02:00:00,M10.5.0/03:00:00
*****: /oracle/product/agent10g/sysman/config > more emd.properties|grep agentTZ
agentTZRegion=+01:00
which is the reason for the difference of 120min as shown by the resetTZ I assume because AIX system time says MEZ -1 and emd.properties finds GMT+1 which gives a difference of 120min.
I already applied the patch 5632264 to the agent, but the issue still exists.
When I manipulate the envirement TZ to GMT+01:00 the agent starts again, but this is no solution. Also patching the TZ of UNIX/AIX is no solution because this will cause other issues.
Any ideas how I can get the agent working again?
ps. I already tried a reinstallation of the Agent, but the issue still exists.
Thank you
F.Wittmann

Hello,
I already installed the DST patch v4. see my first post.
Below I attached the logs from starting the agenent since crash:
emctl.log (since start until crash)=
1310886 :: Thu Apr 3 10:29:31 2008::AgentLifeCycle.pm: Processing status agent
1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:Processing status agent
1310886 :: Thu Apr 3 10:29:31 2008::AgentStatus.pm:emdctl status returned 1
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: Processing start agent
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm: EMHOME is /oracle/product/agent10g
1462412 :: Thu Apr 3 10:29:41 2008::AgentLifeCycle.pm:status agent returned with retCode=1
1462412 :: Thu Apr 3 10:30:37 2008::AgentLifeCycle.pm: Exited loop with retCode=4
1003654 :: Thu Apr 3 10:35:00 2008::AgentLifeCycle.pm: Processing status agent
1003654 :: Thu Apr 3 10:35:00 2008::AgentStatus.pm:Processing status agent
1003654 :: Thu Apr 3 10:35:02 2008::AgentStatus.pm:emdctl status returned 3
1536132 :: Thu Apr 3 10:38:26 2008::AgentLifeCycle.pm: Processing status agent
1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:Processing status agent
1536132 :: Thu Apr 3 10:38:26 2008::AgentStatus.pm:emdctl status returned 1
emdctl.trc (since start until crash)=
2008-04-03 10:29:41 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:29:41 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
2008-04-03 10:37:05 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:37:05 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
2008-04-03 10:38:26 Thread-1 WARN http: snmehl_connect: connect failed to (sat141:3872): A remote host refused an attempted connect operation. (error = 79)
2008-04-03 10:38:26 Thread-1 ERROR main: nmectla_agentctl: Error connecting to https://*****:3872/emd/main/. Returning status code 1
emagent.log (since start until crash)=
2008-04-03 10:31:13 Thread-1 EMAgent started successfully (00702)
2008-04-03 10:37:04 Thread-1670 <Upload Manager> Unsuccessful Upload attempts for XML file exceeds specified limit=3, Agent will shutdown (00851)
2008-04-03 10:37:04 Thread-1 EMAgent abnormal terminating (00704)
emagent.trc (since start until crash)=
2008-04-03 10:35:16 Thread-1076 WARN TargetManager: Regenerating all Metadata
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: In getTypeAndNameForHostTarget
2008-04-03 10:36:48 Thread-1076 DEBUG TargetManager: getTypeAndNameForHostTarget found host, sat141
2008-04-03 10:36:48 Thread-1076 WARN collector: Regenerating all DefaultColls
2008-04-03 10:36:58 Thread-1076 ERROR upload: Failed to upload file A0000003.xml, ret = -6
2008-04-03 10:36:58 Thread-1076 ERROR upload: 3 Failures in a row for A0000003.xml, we give up
2008-04-03 10:36:58 Thread-1076 ERROR upload: Error in uploadXMLFiles. Trying again in 72.00 seconds or earlier.
2008-04-03 10:37:04 Thread-1670 WARN upload: FxferSend: received fatal error in header from repository: https://stloem2:1159/em/upload
FATAL_ERROR::500|ORA-20603: Updating timezone region of a target is not supported. Use mgmt_target.set_agent_tzrgn() API to modify the timezone region.(target name = sat141:3872)(target type = oracle_emd)(new tzrgn = MET)(old tzrgn = +01:00)
ORA-06512: at "SYSMAN.CHECK_DUPLICATE_TARGETS", line 92
ORA-04088: error during execution of trigger 'SYSMAN.CHECK_DUPLICATE_TARGETS'
2008-04-03 10:37:04 Thread-1670 ERROR upload: number of fatal error exceeds the limit 3
2008-04-03 10:37:04 Thread-1670 ERROR upload: agent will shutdown now
2008-04-03 10:37:04 Thread-1670 ERROR : Signalled to Exit with status 55
2008-04-03 10:37:04 Thread-1 ERROR main: EMAgent abnormal terminating
=======================================================
when I run emctl config agent getTZ it returns me GMT+01:00,
but with this value the agent does not start, oly with MEZ....
root@******: /oracle/product/agent10g/oracore/zoneinfo > su - oradeu -c /oracle/product/agent10g/bin/emctl config agent getTZ
Oracle Enterprise Manager 10g Release 3 Grid Control 10.2.0.3.0.
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
GMT+01:00
Kind regards
F.Wittmann

OEM mass deploy question

The docs basically say that every server database has to have the same path for the oracle home. We have some older databases with homes in different directories. Is it really necessary for us to go to each oracle home on the servers and run the Download script or is there a way to use the mass deploy if I get a list of the different oracle homes?

the OS software version is differnet also. Its not going to compile. That is just one example. I am hoping there is a download of multiple versions of unix/linux and I can mass deploy them through the network.

Error 404 when trying to download OEM Agent

Hello,
I have tried since yesterday to download the OEM agent for Linux for x86-64 bit from the the page http://www.oracle.com/technology/software/products/oem/htdocs/agentsoft.html but I always have the error 'Page not found 404' (http://www.oracle.com/errors/404.html).
I also tried the direct link (http://download.oracle.com/otn/linux/oem/10205/Linux_x86_64_Grid_Control_agent_download_10_2_0_5_0.zip) with the same result.
Am I missing something or is there a problem on the Download web site ? If so,is there another way to download this agent ?
Thanks in advance

There might be some issues with download site. Please try download from
http://edelivery.oracle.com
Regards
Rajesh

Error while installing OEM agent

Hi All
Below is my environment details.
Oracle - 10.2.0.4.0
Linux - RHEL5 - 2.6.18-128.1.6.el5
Two node RAC environment
I am following my company documents for installing OEM agent.
I executed the below command
agendDownload.linux_x64 -n <cluster_name> -c nodename1-vip,nodename2-vip
I got below error
Performing tests to see whether nodes nodename1-vip,nodename2-vip are available
SEVERE:OUI-25023:The local node is not selected for installing this product. Include the local node in the cluster list or perform the installation on the nodes on which the install is to be performed.
Can somebody help me why I got error. i pinged both the vips and am able to ping.
i have another doubt. Do i need to mention vip name or just host name?
Edited by: user1368801 on Aug 12, 2009 9:56 PM

Thanks Surachart
I checked the inventory.xml file
Only hostnames (not VIP) are mentioned in the inventory.xml file. That means, do i need to mention only host names?
Since I am following the company standard document, I need to be 100% sure before deviating from the document or else taking this vip issue to the document authors.

How to install and configure OEM agent in VCS cluster

Hi there,
I would like install 11g OEM agent for SUN SPARC OS for two node VCS cluster. OEM repository is residing in another server.
Database (to be configured) is running on one node of VCS cluster, but it will be able to failover other server for any issues.
I have downloaded the agent for sparc and planning to do the silent install.
Could you please give me the steps to configure both nodes of the cluster including the parameters which need to be changed in the response file?
Thanks in advance.
Regards

We are using OEM agents on VCS clusters. Some options are to 1) fail-over the agent with the database; 2) manually inform OEM that an instance has moved using emcli relocate_targets; 3) use VCS to relocate_targets through a fail-over script. Since our databases don't move much we have been using option 2 but are now testing option 3.
Doug

Problem starting the oem agent

the agent ran when i configured it with the installation gui. now i need to restart itmanually. This is not on the grid control server.
databasE: 10.1.0.3
oem: 10.2.0.5
solaris
I am in my $AGENT_HOME/bin
oracle(eradev) 24> emctl start agent
EM Configuration issue. /opt/oracle/product/10.1.0.3/myserver.com_mydev not found.
The directory show is the oracle home of the database that is currently set to the ORACLE_SID.
I tried using the emca, but that seems to configure for stand alone OEM. I need to start an agent to communicate with my Grid Control OMS.
Edited by: Guess2 on Sep 10, 2009 7:26 AM

Try this:
$ cd $AGENT_HOME/bin
$ ./emctl start agent:p

Multiple OEM agents installed

Good morning all,
Our test database is a single node db in Sun Microsystems Inc. (SunOS 5.10). The database version is 10.2.0.4. We have an oem agent (10.2.0.4) installed in this db server communicate with a 10g grid control. Everything is working fine. Now we are trying to migrate this db server under 11g grid control. So what we did is installing new version of agent (10.2.0.5) into a different directory and configure this agent to talk to 11g grid control. So basically we have two agents installed in this db server. One is 10.2.0.4 agent which is talking to 10g grid control and another agent 10.2.0.5 which is talking with 11g grid control. Although both agents are running but we experience some issues: First, we noticed that all listeners in the server are in “Status Pending” in 11g grid control but actually all listeners are up. Second, a notification rule has been setup in 11g grid control to monitor one db instance and I purposely set the threshold very low so I can receive the alert email. But the all the alert emails actually comes from 10g grid instead of 11g where I set threshold very low. I am not sure how agent works internally so I am not sure if multiple agents will ever be work in one db server. Does anybody have any thoughts on this? Any insights to share?
Greatly appreciate your help!
Shirley

Hi,
You not there are most of the things about a target which are stored locally on the target rather than on the GC itself. For example, if you set t matrix value for a database target, it is stored on the database itself whether you use 10g or 11g GC . Here in your case, i think your both GC are fighting together to monitor a single target which is configured on both and i think it will not be supported (you can confirm from MOS). So my advise will be to configure your targets with only one GC (either 10g or 11g)
Salman

OEM agent restarts frequently

Hi,
I have an OEM agent monitoring RAC database,agent is getting restarted 2-3 times a day.
Agent:10gR5 with latest PSU
OMS:10gR5 PSU4
OS: Solaris 5.10
Agent log shows below error
emagent.trc
2011-08-23 00:13:53,462 Thread-26796 ERROR scheduler: Collection rac_database:dbname:aq_monitoring_alerts has not finished in 721 minutes (allowed: 720).
Exiting agent.
2011-08-23 00:13:53,711 Thread-26796 ERROR : Signalled to Exit with status 3. Hung collection
2011-08-23 00:13:53,748 Thread-1 ERROR main: EMAgent abnormal terminating
2011-08-23 00:14:10,558 Thread-1 WARN upload: Merging leftover data file named rawdata3.dat
2011-08-23 00:14:10,687 Thread-1 WARN upload: Merging leftover data file named rawdata4.dat
2011-08-23 00:14:10,810 Thread-1 WARN upload: Merging leftover data file named rawdata5.dat
2011-08-23 00:14:10,945 Thread-1 WARN upload: Merging leftover data file named rawdata6.dat
2011-08-23 00:14:11,136 Thread-1 WARN command: Job Subsystem Timeout set at 600 seconds
2011-08-23 00:14:11,350 Thread-1 WARN upload: Upload manager has no Failure script: disabled
emagent.nohup
(pid=17814): emagent now exiting abnormally - exiting abnormally Consult '.trc' and '.log' files.
----- Tue Aug 23 17:04:14 2011::Checking status of EMAgent : 17814 -----
----- Tue Aug 23 17:04:24 2011::Checking status of EMAgent : 17814 -----
----- Tue Aug 23 17:04:24 2011::EMAgent exited at Tue Aug 23 17:04:24 2011 with return value 3. -----
----- Tue Aug 23 17:04:24 2011::EMAgent has requested a restart. Will be restarted. -----
----- Tue Aug 23 17:04:25 2011::Restarting EMAgent. -----
----- Tue Aug 23 17:04:32 2011::Agent Launched with PID 22499 at time Tue Aug 23 17:04:32 2011 -----
----- Tue Aug 23 17:04:32 2011::Execing EMAgent process is taking longer than expected 120 secs. -----
----- Tue Aug 23 17:04:32 2011::Time elapsed between Launch of Watchdog process and execing EMAgent is 149662 secs -----
(pid=22499): starting emagent version 10.2.0.5.0
(pid=22499): emagent started successfully
Thanks in advance....

On June the 8'th last year you had the same issue with a 10.2.0.4 agent. See EM agent restarts with error host_storage has not finished in 721 minutes (
Did you ever solve that one?
I think it is best to create a Service Request.
Eric

Installing CS3 (Volume License) for mass deployment via NetInstall (via OS X Server)

Hello.
I'm wondering if anyone has any experience using CS3 (volume license) for mass deployment? We used to manually install on machines, but as the size of the organization has grown, this has become more and more inconvenient. This summer we're planning on a complete upgrade to all systems and during this process we're doing HD formatting and clean installations of all systems and software. To make this process more efficient (as all systems are set up the same way) we're now looking into using OS X 10.5 Server, NetInstall and a cloned system image for deployment to all machines.My question is, is there anything relating to CS3 that may cause issues with this process? Does CS3 installation bind itself to the hardware it was installed on? Since we are using a volume license, I don't have to worry about individual serial numbers and activating the system with Adobe, but again, I'm unsure if installations are somehow tied into the hardware they were installed on? Ideally, I'd install CS3 onto the "master" system and run all updates prior to making the final system image. Has anyone that's done this using CS3 provide any information that may help me out?
Thanks,
Kristin.

kristin,
No one is withholding a reply from you because you're using CS3. It is just that no one who may know the answer has wandered by. The folks who help here are Adobe product users, like you.
>This summer we're planning on a complete upgrade to all systems and during this process we're doing HD formatting and clean installations of all systems and software.
My only point was that you will be spending a lot of time and effort on a setup that is centered around older, discontinued software. And my thinking is that if you are going to the time and expense of revamping your office, why not do it right and include CS4? If you install CS3 now, when you do decide to upgrade to CS4, you will be giving yourself a lot of extra work. From my point of view, the added software cost would be a good investment
during the current systems overhaul. Otherwise, it just isn't a "complete upgrade". You're installing '07 parts on the '09 Mercedes.
Neil

Mass deployment of Archlinux idea

Hello all, I had kind of an epiphany recently. I know that pacman is underway with becoming a library. Most people have been looking at this as only a potential for a GUI app, which I think is definitely a cool idea. The epiphany that I had is since pacman will be a library, how much more work would it take to create another piece of software to tie this library into a webmin module. I think it would be fairly easy. One other idea I had was creating another simple piece of software that would use the pacman library to install Archlinux on a large number of machines. You could have one head node, then all the other computers connected to the head node. This way you can run a monitored, automated script to install all the needed software on a lot of computers. An example would be installing linux in a computer lab. My university, Florida Tech, is updating their computer labs from fedora core 2 to gentoo. All the computers in the lab are exactly the same in hardware configuration. Adding functionality for mass deployment would definitely cut down on installation time. Also, I'm not trying to push this issue hard, just as an idea. Whenever Archlinux becomes ready for mass deployment on machines, we could revisit this idea/issue. What do you guys think of this idea?

Hello all, more discussion is ensuing I see. I didn't think that the discussion would continue on this long. cactus, I see you are stirring up quite a few questions. I will try to answer them as best I can.
cactus wrote:??
I don't get that feeling at all. Please elucidate further.
As for your first question, on why I get the impression people don't want to see Archlinux take off toward a more bussiness/formal world, what I meant by that question is seeing Arch moving into something like Suse linux. I was seeing it becoming a GUI linux distro that was simple in design and comparing that view with the view of other Arch users. On the website homepage, it mentions that Arch is more of a veteran distro, not for newbs. I just picked up the overall feeling that the Arch users didn't want to see Arch turn into something like Suse.
cactus wrote:I don't see a need for this at all. You speak loosely of forking, when you should be speaking of customization. It would be very easy to use arch in a business sense, with just setting up your own repository, and only pushing updates out to that repository when they have been more fully tested. No need to do anything different really.
As for the second question, if Archlinux was going to trully succeed successfully in the business market, if it does later decide to move into the business world, it has to have rock hard, well-tested software. A stable branch, and I really mean STABLE branch would have to be formed, or an offshoot project could be formed that works off of Archlinux leaving the traditional Archlinux project the way it is. I have a few friends here at school that can just about break ANY piece of software out there easily, whether it be microsoft, linux/open source, SysV Unix/Solaris, or even BSD. The software being distributed would have to be EXTENSIVELY tested, which is a very difficult and time consuming task to do.
cactus wrote:Once again, I think it is very premature to speak of forking. See answer to above.
As for the answer to the fourth question, I believe it is related enough to the third answer to be answered there.
cactus wrote:To be honest, why present an idea if you don't really care about it. Stand behind what you think about something, but be open to other ideas too. I never liked the "just saying this to be saying this" type thing. Always seemed like a bit of a cop-out to me..in case of flamage, you can always fall back on "I was just saying it to say it!"..
The reason I throw ideas out that I may not be passionate or interested in is because somebody else might. Somebody else may like the idea and want to run with it. Also, productive discussion on many different issues like this develop. Even though this particular discussion may not be relavent for Archlinux yet, it may be very pertinent in the future. Lastly, one of the first things I learned here at college is that you never throw a reasonably sound idea out, even if you are not into it, because many times the idea may evolve into something separate that is VERY interesting to you.
On a separate note, I want to say that I am very happy with the everyones input. This discussion has been most definitely productive. I hope nobody feels that I am trying to push Archlinux in any given direction, like into the business world. I am COMPLETELY satisfied with what Archlinux has provided and am very excited to see what it will offer in the future. Again I threw the idea out into the forum not because I was particularly interested in it myself, but wanted to share the idea with the community, upholding the open source philosophy, and seeing if anyone else might want to do something with the idea. It is also fun to take a step back and look at how the discussion developed over time. Good day to you all and take care.

Outbound BPEL Process deployment Issue in SOA (binding.jca-12600)

Hi,
I have Designed an Outbound BPEL Process for Siebel CRM Service Integration using Jdeveloper (11.1.1.3.0). After that I am facing the deployment issue of this application in SOA suite (11.1.1.6.0). Following is the deployment.log status in jdeveloper:-
[10:57:54 AM] ---- Deployment started. ----
[10:57:54 AM] Target platform is (Weblogic 10.3).
[10:57:54 AM] Running dependency analysis...
[10:57:54 AM] Building...
[10:57:58 AM] Deploying profile...
[10:57:58 AM] Wrote Archive Module to C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Deploying sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:57:58 AM] Processing sar=/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Adding sar file - C:\JDeveloper\mywork\Siebel_Outbound_BPEL\QueryWithView_Invoke\deploy\sca_QueryWithView_Invoke_rev1.0.jar
[10:57:58 AM] Preparing to send HTTP request for deployment
[10:57:59 AM] Creating HTTP connection to host:10.10.22.81, port:7001
[10:57:59 AM] Sending internal deployment descriptor
[10:57:59 AM] Sending archive - sca_QueryWithView_Invoke_rev1.0.jar
[10:58:00 AM] Received HTTP response from the server, response code=500
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] HTTP error code returned [500]
[10:58:00 AM] Error message from server:
#;There was an error deploying the composite on AdminServer: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
#;: Generic error.
#;Generic error.
#;Cause: Unable to find suitable outbound binding.
#;Please create a Service Request with Oracle Support.
[10:58:00 AM] Check server log for more details.
[10:58:00 AM] Error deploying archive sca_QueryWithView_Invoke_rev1.0.jar to partition "default" on server AdminServer [10.10.22.81:7001]
[10:58:00 AM] #### Deployment incomplete. ####
[10:58:00 AM] Error deploying archive file:/C:/JDeveloper/mywork/Siebel_Outbound_BPEL/QueryWithView_Invoke/deploy/sca_QueryWithView_Invoke_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer)
And the following is the SOA Server Side log file status:-
####<Jun 3, 2013 10:36:05 AM AST> <Info> <Health> <HOSADDAT02> <AdminServer> <weblogic.GCMonitor> <<anonymous>> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-00000000000000f4> <1370244965280> <BEA-310002> <36% of the total memory in the server is free>
####<Jun 3, 2013 10:36:12 AM AST> <Error> <ServletContext-/soa-infra> <HOSADDAT02> <AdminServer> <[ACTIVE] ExecuteThread: '2' for queue: 'weblogic.kernel.Default (self-tuning)'> <weblogic> <> <4be72ac3bdb5ebae:-a61256d:13f08d94c98:-8000-000000000000182b> <1370244972343> <BEA-000000> <Error during deployment
oracle.fabric.common.FabricException: Deployment Failed: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:64)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: oracle.fabric.common.FabricDeploymentException: [JCABinding] [QueryWithView_Invoke.QueryWithView/1.0]Unable to complete load due to: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
: Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
{rootCauses=[]}
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:458)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Caused By: BINDING.JCA-12600
Generic error.
Generic error.
Cause: Unable to find suitable outbound binding.
Please create a Service Request with Oracle Support.
     at oracle.integration.platform.blocks.adapter.fw.metadata.AdapterBindingConfig.addAdapterReference(AdapterBindingConfig.java:206)
     at oracle.integration.platform.blocks.adapter.AdapterReference.setupAdapterReference(AdapterReference.java:506)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:425)
     at oracle.integration.platform.blocks.adapter.AdapterReference.load(AdapterReference.java:82)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deployReferences(CompositeDeploymentConnection.java:201)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentConnection.deploy(CompositeDeploymentConnection.java:93)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.initDeployment(CompositeDeploymentManagerImpl.java:150)
     at oracle.integration.platform.blocks.deploy.CompositeDeploymentManagerImpl.load(CompositeDeploymentManagerImpl.java:63)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at org.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:307)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:149)
     at oracle.integration.platform.blocks.deploy.DeploymentEventPublisher.invoke(DeploymentEventPublisher.java:77)
     at org.springframework.aop.framework.ReflectiveMethodInvocation.proceed(ReflectiveMethodInvocation.java:171)
     at org.springframework.aop.framework.JdkDynamicAopProxy.invoke(JdkDynamicAopProxy.java:204)
     at $Proxy314.load(Unknown Source)
     at oracle.integration.platform.blocks.deploy.StandaloneCompositeDeploymentCoordinatorImpl.coordinateCompositeDeployment(StandaloneCompositeDeploymentCoordinatorImpl.java:59)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deployNewComposite(BaseDeployProcessor.java:415)
     at oracle.integration.platform.blocks.deploy.servlet.BaseDeployProcessor.deploySARs(BaseDeployProcessor.java:250)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:167)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeployWork(DeployProcessor.java:112)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.doDeploy(DeployProcessor.java:99)
     at oracle.integration.platform.blocks.deploy.servlet.DeployProcessor.process(DeployProcessor.java:81)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPostInsideLoggingSession(CompositeDeployerServlet.java:219)
     at oracle.integration.platform.blocks.deploy.servlet.CompositeDeployerServlet.doPost(CompositeDeployerServlet.java:130)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:727)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:301)
     at weblogic.servlet.internal.TailFilter.doFilter(TailFilter.java:26)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.security.jps.ee.http.JpsAbsFilter$1.run(JpsAbsFilter.java:119)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAsPrivileged(JpsSubject.java:315)
     at oracle.security.jps.ee.util.JpsPlatformUtil.runJaasMode(JpsPlatformUtil.java:442)
     at oracle.security.jps.ee.http.JpsAbsFilter.runJaasMode(JpsAbsFilter.java:103)
     at oracle.security.jps.ee.http.JpsAbsFilter.doFilter(JpsAbsFilter.java:171)
     at oracle.security.jps.ee.http.JpsFilter.doFilter(JpsFilter.java:71)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at oracle.dms.servlet.DMSServletFilter.doFilter(DMSServletFilter.java:139)
     at weblogic.servlet.internal.FilterChainImpl.doFilter(FilterChainImpl.java:56)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.wrapRun(WebAppServletContext.java:3730)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(WebAppServletContext.java:3696)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:120)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(WebAppServletContext.java:2273)
     at weblogic.servlet.internal.WebAppServletContext.execute(WebAppServletContext.java:2179)
     at weblogic.servlet.internal.ServletRequestImpl.run(ServletRequestImpl.java:1490)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:256)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:221)
Kindly help me in this regard

Solution:
Workaround the issue immediately by removing the "ns1:" qualification on the operation for the binding.jca entry in the composite.xml and redeploying.
For example:
From:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="ns1:BAPI_COMPANYCODE_GETDETAIL"/>
To:
<binding.jca config="BAPI_COMPANYCODE_GETDETAIL_invoke_3P.jca"
operation="BAPI_COMPANYCODE_GETDETAIL"/>
Regards,
Shaheer Badar

Adobe Acrobat 9 Pro deployment issue

Hello. I am having a deployment issue with Adobe Acrobat 9 using Altiris. I create the rip which is bassically an image of the install. My facility has pruchased 50 seats for this software so I know we are covered for the users that we have to use this software. The issue that I am having after I make the rip, and deploy it to a machine it asks for the CD key again in order to use. Am I having an issue with my installation or is Adobe put some kind of security into their software so that when you try to make a rip of the installation is asks for teh CD Key again after the install? Is this an issue that can be resolved?

SOLUTION:
The issue was somehow related to DPI (START > Settings > Control Pannel > Display > Settings Tab > Advanced button). Eventhough the DPI was set to normal, I switched it to LARGE, restarted the machine, logged in after the reboot, changed it back to normal size, restarted again, logged in once more, checked the Printer Preferences and PRESTO --- a properly displayed window.

OEM Agent mass deployment issue

Similar Messages

Maybe you are looking for