OEM Alerts Issue ?

hi friends!
I am using oracle 10g OEM and usually its show different alerts in very first screen. I have defined different values for thresh holds for tablespaces but its not generating alerts whenever tablespace used 90% or above. Any idea for this problem?
regards
Irfan Ahmad

Hi,
Are you able to see alerts on database home page of OEM console?
If the answer is NO,then problem is with your "metrics and policy" settings.
If there are alerts in DB home page,then problem will be either with your "notification rule" or "Notification Method".
Go to Preferences>Notification>Rules -->to check your current notification rules.
Go to Setup>Notification Methods>Mail Server --> Try to send a test mail

Similar Messages

Setting OEM Alerts

Hi,
I have an issue in receiving OEM alerts if archive destination > n%. I'm trying to receive email notification if archive destination > 95%. In the target database, I set Metric and Policy Settings Archive Area Used (%) to warning 95. Then, in preferences rules, I created a rule with checking e-mail notification as below:
Archiver Hung Alert Log Error All Objects Critical, Warning, Clear
Archiver Hung Alert Log Error Status n/a Critical, Warning, Clear
Archive Area Used (%) All Objects Critical, Warning, Clear Succeeded, Problem Succeeded, Problem
All notifications setup are correct because I'm recieving alerts for tablespaces usage.
I checked log_archive_dest in both init and spfile, all are set correctly.
Please advise what am I missing.
Thanks in advance

Yes, I even changed that to > 1% and copied files to the destination to make sure that the space used >1%.
I still did not receive any notification :(

Can we redirect OEM alerts to a separate logs on the server.

Hi,
We are using OEM11GR1 and we are getting the alerts as per the expecation. Till now we are managing the issues manually i.e upon receiving the OEM alert we will raise internal ticket and will close upon resolution. Since day by day alerts getting increased, we would like to use unicenter tool (third party tool purchased by client) for issue tracking system. For this tool, OEM alert should be available in the server as a log file, So that it will do the need full.
My question is weather is it possible to generate a log file rather than sending OEM alert to users upon any issue.
Please let us know if any further clarification is required on my question.
Regards
DBA.

Yes you are able to integrate with any ticketing system.
take a look at OTN, for connectors to other systems like HP ServiceCenter etc.
Apart from that, using Notification Methods you are able to implement any integration thinkable.
take a look at
Oracle® Enterprise Manager Administration
Extending Notification Beyond E-mail
regards
Rob
http://oemgc.wordpress.com

Iphone 4s calendar alert issue

I tend to put 2 alerts on my calendar events, one for 1 day before and the second one for 1 hour before (or some other on the day of event). I have noticed that when I put in the first alert for 1 day before and then enter the second alert for 1 hour before and click done they have somehow been reversed, the first alert is now 1 hour before and the second alert is 1 day before. I have to click them again and change them to the proper order, this usually take about 3 tries to get them to stay as I want them. I can them save the event and all is good. I was at the Apple store and the staff duplicated this issue so I know I'm not the only one experiencing this nuissance. Has anyone else come across this? I do hope the upcoming update will fix it.

Update since Genius visit:
1) Apple is working on an update
2) There is no awareness at Apple of this calendar alert issue as a bug, hence it is not being addressed/worked on
3) Solutions offered by Genius have not resolved this issue.
Solutions offered by Genius, in order of which to try first:
1) Delete calendar data from iPhone: Settings>iCloud>Calendars OFF and then restore data from iCloud: Calendars ON
2) Reset iPhone settings: Settings>General>Reset>Reset all settings
3) Restore to factory settings: Settings>General>Reset>Erase all content and settings, then restore data from iCloud and in-app backups.
4) Use another calendar app (seriously)
Of course, if the bug is actually part of the iOS software (could it be?) then no amount of erasing and restoring data will fix the issue. I completed the first two options with no change, and am not willing to do the third option because I am not interested in going through the process of backing up, then restoring all my third-party apps.
My solution: raise awareness of this issue with Apple, so that it can be worked on and fixed. I have reported it as a bug through Apple's feedback module: http://www.apple.com/feedback/iphone.html and I encourage-- no, ask-- you to do the same, if you are experiencing this issue. I provided a link to this forum topic to show the variety and detail of problems.
Are you sick of missing alerts, fiddling endlessly, coming up with workarounds, paying for unreliable software, and not being responded to? I am. It's time to rally!

Alert issue in oracle EBS

Hi,
I have a test instance with EBS:12.0.6,Oracle DB :10.2.0.4 and RHEL:4
I am facing a alert issue in Purchasing as follows:
It throws following error: APP-FND- 01874:Please link in Oracle Alert program library.
I had a metalink id 211089.1 addressing the same error but it is for 11.5.10.2 EBS
Please help with to resolve this issue at the earliest.
Regards,
Milan Rathod

How do you get the error?
Can you find any errors in the workflow log file?
The steps in the doc should be applicable (except for the last step), so you may try the same solution and check then.
Thanks,
Hussein

Summary Alert Issues - Summary Alert Being Sent Out as Multiple Emails

I'm sure many of you have seen the various posts online about Summary Alerts that are supposed to show changes over the last 24hrs in a single email being sent out as either multiple emails containing a random number of items per email, or individual emails
for each item that was updated. The question I have is... Has this issue been resolved with SP2 or any of the Post-SP CUs?
One of my users mentioned that the August 2014 CU was supposed to have a fix for this issue, but I am unable to find any documentation specifically mentioning alert handling or the Summary Alert issue mentioned above.
Current Environment is SP1 + Aug 2013 CU (We're a tad behind -- but I'm working on that)
Any information would be helpful.
Thank you!
MH

Hi,
I suggest you to delete the existing Rule and setup a New Rule.
I have tested this on my lab and it works fine.
You might want to refer to the below article on Setting up Alert Notifications
https://msdn.microsoft.com/en-us/library/azure/dn306638.aspx?f=255&MSPPError=-2147217396
Hope this helps !
Regards,
Sowmya

Disable OEM alerts from busy disk device

Hello
Using OEM GRID target database is 10G R2 under Sun Solaris 10
How could I do to disable the OEM alerts from busy disk device?
Thank in advance

MOS: How to clear an Alert in Enterprise Manager Grid Control (Doc ID 748630.1)

Configuring OEM alerts to Mobile

Can someone send me the metalink note how to configure OEM alerts to mobile........

hi,
could you explain how to configure mobile alerts in 9i amd 10g.

Calendar alert issue

Hi all,
I've got a minor annoying issue. My wife (iPhone 4 with iOS6) and I (iPhone 5 wiht iOS6) share an apple account. On iCloud, we've got two calendars. The first is called "Calendar" which is there for us to put all of our general home stuff (birthdays, vacations, appts, etc) and is intended for both of us to use. I've got a second calendar called "Dan" which is just for me with a bunch of stuff she doesn't care about.
Here's the issue. In Calendar, she clicked "Calendars" and deselected the "Dan" under "iCloud Calendars". The only other calendar her Calendar app now shows is our default shared calendar. So, anything I put on the "Dan" calendar no longer shows up... yay! HOWEVER, alerts from my "Dan" calendar still appear on her phone. In other words, if I put an event called "test" on JUST my "Dan" calendar with an alert to go off at 1:00, at that time, BOTH of our phones go off and display alerts. The Event still doesn't show up in her calendar though.
SO, my question is, how can she make it so alerts from "Dan" calendar don't show up on her phone? It's annoying for her, and not cool for me if I want to put in an event that she shouldn't know about.
Thanks,
Dan P.

Update since Genius visit:
1) Apple is working on an update
2) There is no awareness at Apple of this calendar alert issue as a bug, hence it is not being addressed/worked on
3) Solutions offered by Genius have not resolved this issue.
Solutions offered by Genius, in order of which to try first:
1) Delete calendar data from iPhone: Settings>iCloud>Calendars OFF and then restore data from iCloud: Calendars ON
2) Reset iPhone settings: Settings>General>Reset>Reset all settings
3) Restore to factory settings: Settings>General>Reset>Erase all content and settings, then restore data from iCloud and in-app backups.
4) Use another calendar app (seriously)
Of course, if the bug is actually part of the iOS software (could it be?) then no amount of erasing and restoring data will fix the issue. I completed the first two options with no change, and am not willing to do the third option because I am not interested in going through the process of backing up, then restoring all my third-party apps.
My solution: raise awareness of this issue with Apple, so that it can be worked on and fixed. I have reported it as a bug through Apple's feedback module: http://www.apple.com/feedback/iphone.html and I encourage-- no, ask-- you to do the same, if you are experiencing this issue. I provided a link to this forum topic to show the variety and detail of problems.
Are you sick of missing alerts, fiddling endlessly, coming up with workarounds, paying for unreliable software, and not being responded to? I am. It's time to rally!

Oracle 11g OEM job issue

Hi all,
After Oracle 11g migration, i have been facing issues in OEM scheduling. Twice the job did not run even after 11.2.0.7 upgrade. Hence i would like to explore the possibility of scheduling the same in DBMS jobs (we have not faced even a single failure since migration). However there is no mail alert available for successful completion of the job. In this regard i would like to have your views and help to create alerts to proceed further.
Thankx

Hi Ravi,
Really the link helps,eventhough i have been looking for the rootcause to overcome from the job failure(scheduled jobs)
Actually after completion/succeded of my scheduled job i may also get "INITIALIZATION ERROR" status message,so i need to be Re-schedule the particular job again
for next day.
Look up screenshot of the error
Job Name=OEM_FLEET_ICL_SEND_6_30_AM_DAILY
Job Owner=SYSMAN
Job Type=SQL Script
Target Type=Database Instance
Timestamp=Apr 19, 2011 6:30:44 AM
Status=Initialization Error
Step Output=
Command:Output Log
SQLPlus: Release 11.2.0.2.0 Production on Tue Apr 19 06:30:15 2011*
Copyright (c) 1982, 2010, Oracle. All rights reserved.
SQL> SQL> SQL> SQL> Connected.
SQL> SQL> SQL> SQL>
PL/SQL procedure successfully completed.
SQL> SP2-0103: Nothing in SQL buffer to run.
SQL>
Commit complete.
SQL> SQL> SQL> Disconnected from Oracle Database 11g Enterprise Edition Release 11.2.0.2.0 - 64bit Production
With the Partitioning, OLAP, Data Mining and Real Application Testing options
*~~~End Step Output/Error Log~~~*
kindly advice me on this
Thanks

OEM alert

Hi Experts,
I am getting N number of following alert from OEM Grid controller
Target Name=animal.canberra.edu.au:3872
Target type=Agent
Host=animal.canberra.edu.au
Occurred At=Dec 24, 2010 12:32:32 AM EST
Message=Count of targets not uploading exceeded the critical threshold (0). Current value: 2
Metric=Count of targets not uploading data
Metric value=2
Severity=Critical
Acknowledged=No
Notification Rule Name=Agent Upload Problems
Notification Rule Owner=SYSMAN
Cold you please advise the reason behimd this alert and solution for overcome this issue.
Regards,
Salai

Hi Salai,
I had the very same error a few weeks ago, so maybe i can give you another hint.
Off course, as mentioned in previous posts, it can just be that your agent is not uploading the xml files.
This was not my issue, since all xml files were properly uploaded, but not merged into the repository.
From your server animal.canberra.edu.au , issue a 'emctl status agent'
this will report if xml files are pending to be uploaded: this will fall back on the previous posts.
If all is reported uploaded, then note to which the repository URL setting, and go to that machine, and check the folder
%OMS_HOME%\sysman\recv
If you have a loads of xml files, then your problem is the merging of those files into your OEM database (you should also check the error folder)
My problem was that my OEM database did not merge the xml files fast enough (we lately added more targets). I managed to get it solved by performing manual maintenance (refer to metalink ID 456101.1), and the actual solution (in my case) was to increase the SGA (i.e. the database cache).
Hope this helps!!
Regards,
Thierry

SharePoint 2010 Blog Email Alert Issue

I can't seem to make heads or tails of this issue. Any insight would be appreciated.
When a user updates an existing blog post - for example to fix a typo - all users who have elected to receive alerts do, however the body of the content is displayed with strikethroughs. Either all of the content or the title and first few sentences
- even if the change(s) made are not in the first few sentence. Here's is an example of the alert email i received. I changed two words to TYPO and this is how the alert was returned to me:
Title:
test5
Body:
this is how the alert email will look when a change is made.
this is how the alert email will look when a change is made. this is how the alert email
will look when a change is made. this is how the alert email will look when a change is made.
this is how...
this TYPO how the alert email will look when a change is made.
this is how the alert email will look when a change is made. this is how the alert email
will look when a change is made. this is how the alert email will look when a change is made.
this is how TYPO alert email will look when a change is made. this is how the alert email will look when a change is made. this is how the alert email will look when a change
is made. "
I'm trying to determine why is shows the strikethrough. I've tested this a million ways - versioning on/off, content approval on/off, etc. and again sometimes when i receive the
emails, everything in the body will have a strikethrough, and it just doesn't make sense to me.
I know we can customize the alert notification, but i'd hate to have to do that given this appears to behave more like a bug.
Has anyone else come across this, and other than customizing alerts, is there a away to either remove the strikethrough or fix it so that it actually only displays a strikethrough
on items that have changed?
Thanks!
Edit - it didn't come across when i submitted but the light gray text has the strikethrough it in on my alert email.
SPNoob

Here's the solution we were given by MS:
Problem:
You were intermittently getting strike on the text which you receive in email notification sometimes the strikes are on edited text sometimes they are on newly added text
for the site
Cause:
Microsoft SharePoint Foundation includes a set of predefined alert templates. These alert templates are stored in the Alerttemplates.xml file, which is located in the %ProgramFiles%\Common
Files\Microsoft Shared\web server extensions\14\TEMPLATE\XML folder. Alerttemplates.xml defines the format, contents, filters, event types and properties used to create alert messages from each list type. A developer can customize alerts by modifying a copy
of the Alerttemplates.xml file and then loading the customized alert templates by using the command stsadm -o updatealerttemplates.
Resolution/Workaround:
Take a copy of alerttemplates.xml; look into: Program Files\Common Files\Microsoft Shared\Web Server Extensions\12\TEMPLATE\XML
Replace all entries you find with <Limit Len="255" to 512
Be sure that you have a new filename!
run stsadm -o updatealerttemplates -url
http://SharePointName -filename YourFilename
Restart OWSTIMER; the SharePoint timer service in service manager
Hope this works for you!
Dianna
SPNoob

BPM alert issue

Hi,
i created bpm with block step in that i was used deadline exception branch, while testing the message was processed successfully but message also going to excetion and deadline branch and creating alerts.(but there no exception found).i gave the deadline branch processing time is 2 mins and i created alert in exception branch but getting any error its going to exceptio branch.please can anyone help in the issue.
Thanks,
Seshagiri

Hi Kevin,
as already explained via another communication channel I think the collector is working perfectly fine. Be aware that, like most other Procurement collectors, we are checking on line item level and not only on document level. As your example shows ONLY line item 20 is created without PR reference. But your screenshot of the document itself shows line item 10 which is created with a PR reference and hence was not in our output list. Also a look in table EKPO shows that one item was created with reference and the other wasnu2019t.
Best Regards
Volker

BPM Alert Issue - P.O Created withour ref to Purch Req

Hi,
Has anyone else had any issues with the BPM alert "P.o's created without ref to a P.O";? It seems to be reporting incorrectly - it gives us sometimes P.O that were in fact created with ref to a purch req.
I've raised an OSS for this with Sap - although I'm still awaiting a response...Has anyone had the same issue described above?
Thanks,
K
Edited by: Kevin Devaney on Nov 11, 2010 11:39 AM

Hi Kevin,
as already explained via another communication channel I think the collector is working perfectly fine. Be aware that, like most other Procurement collectors, we are checking on line item level and not only on document level. As your example shows ONLY line item 20 is created without PR reference. But your screenshot of the document itself shows line item 10 which is created with a PR reference and hence was not in our output list. Also a look in table EKPO shows that one item was created with reference and the other wasnu2019t.
Best Regards
Volker

OEM configuration issue in Oracle 10g

Hi,
I am trying to manually configure OEM on oracle 10g solaris platform (5.10). Earlier I have configured the OEM manually on the same server and then due to customer request de-configure it. But now again, I need to re-configure OEM on same server and facing issue.
Steps which I am following are :-
-> Listener is started
-> Database is up and running.
-> Creating repository through command emca -repos create
-> Configuring the dbconsole through command emca -config dbcontrol db
At this step after providing the information of database name, listener port, Password for SYS user,Password for DBSNMP user,Password for SYSMAN user,Email address for notifications (optional): [email protected],Outgoing Mail (SMTP) server for notifications (optional): wbmlir1.mail.xerox.com, it is giving the below error that db console cannot be started.
Do you wish to continue? [yes(Y)/no(N)]: Y
Aug 22, 2011 10:18:38 AM oracle.sysman.emcp.EMConfig perform
INFO: This operation is being logged at /rdwq/apps/oracle/product/10.2.0.4.2011Q1/cfgtoollogs/emca/rdwq/emca_2011-08-22_10-17-04-AM.log.
Aug 22, 2011 10:18:43 AM oracle.sysman.emcp.ParamsManager getLocalListener
WARNING: Error retrieving listener for usa7061ux300
Aug 22, 2011 10:18:44 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsoleINFO: Securing Database Control (this may take a while) ...
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsoleINFO: Database Control secured successfully.
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.DBControlUtil startOMSINFO: Starting Database Control (this may take a while) ...
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin/emctl start dbconsole
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database ControlRefer to the log file at /rdwq/apps/oracle/product/10.2.0.4.2011Q1/cfgtoollogs/emca/rdwq/emca_2011-08-22_10-17-04-AM.log for more details.
Could not complete the configuration. Refer to the log file at /rdwq/apps/oracle/product/10.2.0.4.2011Q1/cfgtoollogs/emca/rdwq/emca_2011-08-22_10-17-04-AM.log for more details.
Below is the content of logfile :-
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'DISPLAY' is '', discarding the same
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.PlatformInterface addEnvVarToList
CONFIG: Value for env var 'ORACLE_HOSTNAME' is '', discarding the same
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.PlatformInterface getEnvProps
CONFIG: Returning env array from cache
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.PlatformInterface getSortedEnvArray
CONFIG: New Env List: [BKUPDIR=/data, CLASSPATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/emca.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/srvm.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/srvmasm.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/emConfigInstall.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/ldapjclnt10.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/ldap.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/share.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/srvmhas.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jlib/netcfg.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib/xmlparserv2.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/assistants/jlib/assistantsCommon.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/sysman/jlib/emCORE.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/oui/jlib/OraInstaller.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/oui/jlib/OraPrereq.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/inventory/prereqs/oui/OraPrereqChecks.jar:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/oui/jlib/OraPrereqChecks.jar:, DYLD_LIBRARY_PATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib32:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/perl/lib, EDITOR=vi, HOME=/rdwq/ap01/rdwsdba, HZ=, LC_COLLATE=en_US.ISO8859-1, LC_CTYPE=en_US.ISO8859-1, LC_MESSAGES=C, LC_MONETARY=en_US.ISO8859-1, LC_NUMERIC=en_US.ISO8859-1, LC_TIME=en_US.ISO8859-1, LD_LIBRARY_PATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jdk/jre/lib/sparc/client:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jdk/jre/lib/sparc:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/jdk/jre/../lib/sparc:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib32:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/perl/lib:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib:/usr/SUNWspro/lib:/usr/openwin/lib:/usr/dt/lib, LIBPATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib32:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/perl/lib, LOGNAME=rdwsdba, MAIL=/usr/mail/rdwsdba, MANPATH=/local/man:/usr/share/man, NEED_EXIT_CODE=1, NLSPATH=/usr/dt/lib/nls/msg/%L/%N.cat, OLDPWD=/rdwq/ap01/rdwsdba, ORACLE_BASE=/rdwq/apps/oracle, ORACLE_DOC=/rdwq/apps/oracle/doc, ORACLE_HOME=/rdwq/apps/oracle/product/10.2.0.4.2011Q1, ORACLE_PATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin, ORACLE_SID=rdwq, ORACLE_TERM=xsun5, ORAENV_ASK=NO, ORATAB=, ORA_NLS=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/ocommon/nls/admin/data, PATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin:/opt/local/scripts:/opt/local/bin:/opt/local/xns:/opt/X11:/bin:/usr/sbin:/usr/bin:/usr/local/bin:/usr/etc:/usr/ccs/bin:/usr/ucb:/usr/openwin:/usr/openwin/bin:/usr/bin/X11:/usr/openwin/bin/X11:/usr/openwin/lib:/usr/lib:/usr/sbin:/usr/local/bin:/app/oracle/local/dba/utilities:/opt/bin:/opt/EDSsrm/bin:/usr/bin, PWD=//rdwq/apps/oracle/product/10.2.0.4.2011Q1/network/admin, SHELL=/bin/bash, SHLIB_PATH=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib32:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/lib:/rdwq/apps/oracle/product/10.2.0.4.2011Q1/perl/lib, SHLVL=1, TERM=vt100, TNS_ADMIN=, TZ=US/Pacific, XFILESEARCHPATH=/usr/dt/app-defaults/%L/Dt, _=/rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin/emca]
Aug 22, 2011 10:19:01 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Starting execution: /rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin/emctl start dbconsole
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Exit value of 1
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Oracle Enterprise Manager 10g Database Control Release 10.2.0.4.0
Copyright (c) 1996, 2007 Oracle Corporation. All rights reserved.
https://usa7061ux300:1158/em/console/aboutApplication
Starting Oracle Enterprise Manager 10g Database Control ............................................................................................. failed.
Logs are generated in directory /rdwq/apps/oracle/product/10.2.0.4.2011Q1/usa7061ux300_rdwq/sysman/log
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.util.PlatformInterface executeCommand
WARNING: Error executing /rdwq/apps/oracle/product/10.2.0.4.2011Q1/bin/emctl start dbconsole
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at /rdwq/apps/oracle/product/10.2.0.4.2011Q1/cfgtoollogs/emca/rdwq/emca_2011-08-22_10-17-04-AM.log for more details.
Aug 22, 2011 10:24:21 AM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.emcp.EMConfigAssistant.invokeEMCA(EMConfigAssistant.java:486)
at oracle.sysman.emcp.EMConfigAssistant.performConfiguration(EMConfigAssistant.java:1142)
at oracle.sysman.emcp.EMConfigAssistant.statusMain(EMConfigAssistant.java:470)
at oracle.sysman.emcp.EMConfigAssistant.main(EMConfigAssistant.java:419)
Please guide me to resolve this issue.
Thanks

Hi,
Content of emagent.trc :-
2011-08-22 11:37:07 Thread-1 ERROR http: snmehl_allocateListenerPort: failed to bind socket: Address already in use (errno=125)
2011-08-22 11:37:07 Thread-1 ERROR http: nmehl_startHttpListener: failed to listen to HTTP port for http://usa7061ux300:3938/emd/main
2011-08-22 11:37:07 Thread-1 ERROR main: nmehl_startHttpListener failed starting http listener
Content of emagent.trc :-
2011-08-22 11:37:07 Thread-1 ERROR http: snmehl_allocateListenerPort: failed to bind socket: Address already in use (errno=125)
2011-08-22 11:37:07 Thread-1 ERROR http: nmehl_startHttpListener: failed to listen to HTTP port for http://usa7061ux300:3938/emd/main
2011-08-22 11:37:07 Thread-1 ERROR main: nmehl_startHttpListener failed starting http listener
rdwsdba$ tail -100 emdctl.trc
2011-08-23 07:01:19 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:01:19 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:01:19 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:01:19 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:02:49 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:02:49 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:02:49 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:02:49 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:04:19 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:04:19 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:04:19 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:04:19 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:05:49 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:05:49 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:05:49 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:05:49 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:07:19 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:07:19 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:07:19 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:07:19 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:08:50 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:08:50 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:08:50 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:08:50 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:10:20 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:10:20 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:10:20 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:10:20 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:11:50 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:11:50 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:11:50 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:11:50 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:13:20 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:13:20 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:13:20 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:13:20 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:14:50 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:14:50 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:14:50 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:14:50 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:16:20 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:16:20 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:16:20 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:16:20 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:17:51 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:17:51 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:17:51 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:17:51 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:19:21 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:19:21 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:19:21 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:19:21 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:20:51 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:20:51 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:20:51 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:20:51 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:22:21 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:22:21 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:22:21 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:22:21 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:23:51 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:23:51 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:23:51 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:23:51 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:25:21 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:25:21 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:25:21 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:25:21 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:26:52 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:26:52 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:26:52 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:26:52 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:28:22 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:28:22 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:28:22 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:28:22 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:29:52 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:29:52 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:29:52 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:29:52 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:31:22 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:31:22 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:31:22 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:31:22 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:32:52 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:32:52 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:32:52 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:32:52 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:34:22 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:34:22 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:34:22 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:34:22 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:35:52 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:35:52 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:35:52 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:35:52 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
2011-08-23 07:37:23 Thread-1 WARN http: nmehl_readAgentKey: File access failure
2011-08-23 07:37:23 Thread-1 ERROR ssl: Open wallet failed, ret = 28759
2011-08-23 07:37:23 Thread-1 ERROR ssl: nmehlenv_openWallet failed
2011-08-23 07:37:23 Thread-1 ERROR http: 256: Unable to initialize ssl connection with server, aborting connection attempt
There is no secure.log file.
Thanks

OEM Alerts Issue ?

Similar Messages

Maybe you are looking for