OEM Backups not running after Oracle 10.2.0.4 upgrade

Hi All,
I have completely an upgrade from Oracle 10.2.0.3 to 10.2.0.4 and then added the patch set 8708078 to fix a problem we were having with some application objects. By completing the upgrade and applying the patch set the issue with the application objects has been resolved, but now we have an issue with the backups.
I create a back up using the schedule custom backup through the maintenance tab in Enterprise Manager and the script is created but when it is submitted the pre backup stage is successful but then the back up stage just sits and cycles and the message is "Waiting for output". Nothing else happens and the jobs just sits there.
Does anyone have any knowledge of problems with the 10.2.0.4 upgrade or the 8708078 patch set that would cause this issue?
Chicago

You could try to run the backup task (as it is defined in EM) outside EM in command line mode. So you can see, is it a native RMAN problem or a problem with the EM job system.
Werner

Similar Messages

Data protector online backup not running after system copy

Dear guru's,
My online backup is not running.The integration of oracle user sapsr3 with data protector 6.0 failed.the error message that came out is;
Oracle Output: ORA-01031: insufficient privileges
SP2-0640: Not connected
sqlcode 1031
Please advise.
Thanks

can you have a look Note 834917 - Oracle Database 10g: New database role SAPCONN
Note 400241 - Problems with ops$ or sapr3 connect to Oracle
cheers,
-Sunil

OEM is not running after changing the host ip in Oracle10g !

Dear Friends ,
I am installing Oracle10g in Linux RHEL 5 . After installing , I have to also configure OEM database control interface successfully . During installing I use IP '192.168.0.1' , and configure OEM using this ip . But after some times I need to change the host ip address only , then I cannot browse the OEM interface . It shows blank page and give the below error :
[oracle@app log]$ tail -10f emoms.log
2010-05-31 12:08:11,712 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2010-05-31 12:08:11,713 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.271 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
In this moment , would anybody plz tell me , How can I resolve the problem when ip of the host is changed or hostname is changed .
here I mention that , I already change ip into below files successfully :
- network interface
- listener
- /etc/hosts
Waiting for kind reply ... ...

Do not need recreate OEM repository.You have to need change some file`s context. try do following.
1.Go $ORACLE_HOME\<HOSTNAME>_<SID>\sysman\config then edit emoms.properties file. Change following parameters with properly(correct) values(using new IP address):
oracle.sysman.emSDK.svlt.ConsoleServerHost,
oracle.sysman.eml.mntr.emdRepServer,
oracle.sysman.eml.mntr.emdRepConnectDescriptor.
2. Go $ORACLE_HOME\<HOSTNAME>_<SID>\sysman\emd edit targets.xml file. Change
<Property NAME="MachineName" if different real name .
3. export ORACLE_SID=<SID>
emctl start dbconsole

Oracle automatic statistics optimizer job is not running after full import

Hi All,
I did a full import in our QA database, import was successful, however GATHER_STATS_JOB is not running after sep 18 2010 though its enable and scheduled, i did query last_analyzed table to check and its confirmed that it didnt ran after sep18,2010.
Please refer below for the output
OWNER JOB_NAME ENABL STATE START_DATE END_DATE LAST_START_DATE NEXT_RUN_D
SYS GATHER_STATS_JOB TRUE SCHEDULED 18-09-2010 06:00:02
Oracle defined automatic optimizer statistics collection job
=======
SQL> select OWNER,JOB_NAME,STATUS,REQ_START_DATE,
to_char(ACTUAL_START_DATE, 'dd-mm-yyyy HH24:MI:SS') ACTUAL_START_DATE,RUN_DURATION
from dba_scheduler_job_run_details where
job_name='GATHER_STATS_JOB' order by ACTUAL_START_DATE asc; 2 3 4
OWNER JOB_NAME STATUS REQ_START_DATE ACTUAL_START_DATE
RUN_DURATION
SYS GATHER_STATS_JOB SUCCEEDED 16-09-2010 22:00:00
+000 00:00:22
SYS GATHER_STATS_JOB SUCCEEDED 17-09-2010 22:00:02
+000 00:00:18
SYS GATHER_STATS_JOB SUCCEEDED 18-09-2010 06:00:02
+000 00:00:26
What could be the reason for GATHER_STATS_JOB job not running although its set to auto
SQL> select dbms_stats.get_param('AUTOSTATS_TARGET') from dual;
DBMS_STATS.GET_PARAM('AUTOSTATS_TARGET')
AUTO
Does anybody has this kind of experience, please share
Apprecitate your responses
Regards
srh

?So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run, but i see tables are updated still the job is not running. I did >query dba_scheduler_jobs and the state of the job is true and scheduled. Please see my previous post on the output
Am i missing anything here, do i look for some parameters settings
So basically you are saying is if none of the tables are changed then GATHER_STATS_JOB will not run,GATHER_STATS_JOB will run and if there are any table in which there's a 10 percent change in data, it will gather statistics on that table. If no table data have changes less than 10 percent, it will not gather statistics.
http://download.oracle.com/docs/cd/B19306_01/server.102/b14211/stats.htm#i41282
Hope this helps.
-Anantha

EM is not running for Oracle 10.2.0.5 on windows 2008 R2

Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia

70d23884-cf5e-4be4-9c7b-5572c797bae9 wrote:
Hi,
Recently, I installed oracle 10.2.0.4 on Windows 2008 R2 server followed by 10.2.0.5 patchset and 8350262 patch (to solve the problem of the expired certificate).
After the installation, I created listener and database. The EM was working fine for few hours but not running after that. Listener was running all the times.
I tried to to execute "emctl stop dbconsole" and "emctl start dbconsole".
The EM worked again. However, it down again after few hours. I have repeated this process many times but still cannot resolve the this.
I checked the logfiles in in the sysman/log. Herewith the output.
emagent.trc
2013-06-17 11:05:24 Thread-4100 WARN http: snmehl_connect: connect failed to (dkcopeoradb001.FALCKDKWEB:1158): No connection could be made because the target machine actively refused it.
(error = 10061)
2013-06-17 11:09:27 Thread-3520 ERROR ssl: nzos_Handshake failed, ret=28862
2013-06-17 11:09:27 Thread-3520 ERROR http: 296: Unable to initialize ssl connection with server, aborting connection attempt
Please advise and assist.
Thanks.
Regards,
Jia
Why are you bothering to install a de-supported version of Oracle? 10.2 is history and even 11.2 is at terminal release. The bookies are taking money on when 12c will be released.
When I googled "No connection could be made because the target machine actively refused it." I got many, many hits that look useful.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7.

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Premiere Elements 12 will not run after installing on my HP laptop with Windows 7. HOWEVER, PE11, PE10 & PE 9 all run without a problem. I contacted HP, and there are NO NEW or ADDITIONAL video drivers available from HP.
I have NEVER had a problem running ANY software on this laptop -- except for PREMIERE ELEMENTS 12!

Why is Time machine backup not working after Mavericks upgrade?

Why is Time machine backup not working after Mavericks upgrade?

I had the same problem due to the Fire Wire port. Apple tested it told me it is OK!, I tried a new cable, and have tested both ports on my back up device. I find it strange that as soon as I installed Mavericks. The drive does work using USB. It could be a coincidence, I don't absolutely know at this point, my back up drive ports could stop working, but I doubt it!

LiveUpdate 6-not running after last update

application not running after start win7x64, but I did not set anything and not even start
pls. test application
main PC:
moth. H97
CPU: Corei-5
VGA: GTX 560Ti
thx

Hi,
I am pretty sure you want to know what forum's experienced users think about Live Update, don't you?
Live Update is terrible, and in most cases it's better to remove it and forget about it. It's alright to keep it installed and run to check for updates but a lot better and safer to install them manually (yourself) from MSI's product page. And forget about updating BIOS. It's as good as smashing the BIOS chip with the hammer MFlash or Forum's tool is much safer and more efficient.
What updates did it do? What drivers/utilities do you have installed from the CD/MSI's page?

Safari not running after ios8 update for ipad

I updated my Ipad with Retina display with ios8 lately and noticed that safari is not running after update. whenever i try to open it it just pop open and close immediately and automatically.
There was no problem of this kind before the update.
Any solution??

If the above doesn't work:
(A) Try reset iPad
Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
Note: Data will not be affected.
(B) Try reset all settings
Settings>General>Reset>Reset All Settings
Note: Data will not be affected but settings for Wi-Fi, FaceTime, Message, Home Sharing will be reset

Premier elements 12 will not run after re-install

Premier elements 12 will not run after re-install - it is legal and registered with adobe under my ID. WTF! The reason I re-installed it was because it could not find the internet - which is working. And premier 12 was working for a while then quit - that is why as a last ditch effort - i re-installed it. Any ideas?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

WorkerRoles not running after 1/1

Hi! We have a problem with WorkerRoles not running after new years eve. Everything looks fine in the management portal (status running as usual), but no work is being executed. The same code and database runs fine in the local emulator.
Has anyone else encountered this issue or have an idea of where to look for a solution?

Thanks for your reply!
There looks to be some logging (not my code, and the developer is unreachable atm), but all I can find are the .tsf-files when I remote into the server (tried the table2csv tool, but it doesn't output anything, including an error). I should have mentioned
I already tried checking the event log, but there doesn't appear to be anything of relevance in there.
If you have any other idea, that would be great! I haven't used Azure much, and this is my first issue that is not possible to replicate with the emulator..

Finder will not run after re-start

Finder will not run after a re-start. Any quick fixes?

scottg
Please review the following for possible solutions to your Premiere Elements 12 issue.
http://www.atr935.blogspot.com/2014/04/pe12-sign-in-failure-connect-to.html
http://www.atr935.blogspot.com/2014/04/pe12-premiere-elements-12-editor-will.html
Looking forward to learning of your results when your schedule permits.
Thank you.
ATR

Oracle 10 g OEM does not start after XP boot

Hallo!I am currently studying for the Oracle 10g Administration OCA
I installed Oracle 10 g on Windows XP but once I boot the OS and enter the OEM url on the browser,OEM does not load.
I am forced to go to the command prompt and manually start OEM via the command
emctl start dbconsole.
How can I configure my oracle to enable OEM to automatically start after booting the OS?
Thanks.

Hans Forbrich wrote:
user11114098 wrote:
During installation,the computer was connected to the internet via a modem that uses DHCP?So typical.
How do I resolve this issue?Microsoft Loopback Adapter. Force it to a static IP value, and enter that value in the hosts. table.
How?: Discussed more than a few times in these forums. Discussed in Microsoft forums. Discussed on internet.Also discussed in the Fine Installation Guide ... ;-)

Oracle dbsonsole not running after drop temp files

before drop temp tablespace
i was create temp2 tablespace as default temp tablespace
after that
i have droppped temp files last to first
temp4.dbf ..3..2
when i have clicked to delete temp table space in dbconsole
after a few time dbconsole not running
in iexplore
i have tired to start db control again with emctl start dbconsole
it was already running
then i have command
emctl status dbconsole
is not running
i have looked log file i see temp file warning
now what can i do to start dbconsole again

Dbconsole doesn't work proper without temp files. So you should create temp file for temporary tablespace in some other tool.

OC4J not running after creating workspace and projects.

Created one workspace and added six projects. Added PostGes jar to library manager. Before doing this, the OC4J would run a test application successfully. After creating the workspace and project, I created another simple workspace with two JSP, on linked to the other. When trying to run this project get the following:
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering transactions (commit 0) (rollback 0) (prepared 0).
Apr 17, 2008 10:51:53 AM com.evermind.server.jms.JMSMessages log
INFO: JMSServer[]: OC4J JMS server recovering local transactions Queue[jms/Oc4jJmsExceptionQueue].
Apr 17, 2008 10:51:55 AM oracle.j2ee.util.LoggingUtils logAndReturnMessage
WARNING: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Error occurred initializing connectors. Exception is: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
08/04/17 10:51:55 SEVERE: ApplicationStateRunning.initConnector Stack trace: oracle.oc4j.sql.DataSourceException: Exception creating connection pool. Exception: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2072)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnector(ApplicationStateRunning.java:2017)
     at com.evermind.server.ApplicationStateRunning.initConnector(ApplicationStateRunning.java:1272)
     at com.evermind.server.ApplicationStateRunning.initConnectors(ApplicationStateRunning.java:345)
     at com.evermind.server.ApplicationStateRunning.initializeApplication(ApplicationStateRunning.java:206)
     at com.evermind.server.Application.setConfig(Application.java:438)
     at com.evermind.server.Application.setConfig(Application.java:339)
     at com.evermind.server.ApplicationServer.addApplication(ApplicationServer.java:1895)
     at com.evermind.server.ApplicationServer.initializeDeployedApplications(ApplicationServer.java:1651)
     at com.evermind.server.ApplicationServer.setConfig(ApplicationServer.java:1034)
     at com.evermind.server.ApplicationServerLauncher.run(ApplicationServerLauncher.java:131)
     at java.lang.Thread.run(Thread.java:595)
Caused by: javax.resource.ResourceException: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:106)
     at oracle.oc4j.sql.DataSourceUtils.getDataSourceConnectionPool(DataSourceUtils.java:330)
     at com.evermind.server.ApplicationStateRunning.initDataSourceConnectionPool(ApplicationStateRunning.java:2053)
     ... 11 more
Caused by: oracle.oc4j.sql.config.DataSourceConfigException: Unable to create : org.postgresql.Driver
     at oracle.oc4j.sql.config.DataSourceConfigUtils.createConnectionFactory(DataSourceConfigUtils.java:283)
     at oracle.oc4j.sql.DataSourceConnectionPoolImpl.<init>(DataSourceConnectionPoolImpl.java:108)
     at oracle.oc4j.sql.spi.ResourceAdapterImpl.createDataSourceConnectionPool(ResourceAdapterImpl.java:99)
     ... 13 more
Caused by: oracle.classloader.util.AnnotatedClassNotFoundException:
     Missing class: org.postgresql.Driver
     Dependent class: oracle.oc4j.sql.config.DataSourceConfigUtils
     Loader: oc4j:10.1.3
     Code-Source: /C:/Jdeveloper10/j2ee/home/lib/oc4j-internal.jar
     Configuration: <code-source> in META-INF/boot.xml in C:\Jdeveloper10\j2ee\home\oc4j.jar
Remove the posgres jar from the library manager and still not able to run simple two page applications.
All the projects in the other workspace compile fine. The prolblem is that now I am not able to use the internal OC4J. I remove the workspace with the five projects, and the JARs and the two page app will not run.
The OC4J is running when launched from the IDE, ti just can find the pages.
New install of JDEV and the two page app will run fine. Add two user two user libraries and the app will not run.
Thank you,
Ben Carter

Do you have a database connection to postgress defined in JDeveloper?
JDev might be picking this up and trying to add a datasource for it to the embedded OC4J - so try removing it, or alternatively add the postgress JDBC driver jar files to the libraries node under tools->embedded OC4J preferences.

OEM Backups not running after Oracle 10.2.0.4 upgrade

Similar Messages

Maybe you are looking for