OEM console doen't work after deploy.

hi gurus again.
i'm deployed an EM five minutes ago by issuing to these commands:
emca -repos create
emca -config dbcontrol db
everything was good, but one thing still disturbs me. at the end of configuration EM, there was such line:
INFO: >>>>>>>>>>> The Database Control URL is http://localhost.worldwide.com:1158/em <<<<<<<<<<<
whereas localhost.domain.com is not the right host.domain.com name. the hostname is "test" and the domain name is worldwide.com so as far as i understand, my URL should look like:
http://test.worldwide.com:1158/em
i've tryied it, doesn't work. i've also tried the given URL http://localhost.worldwide.com:1158/em, but it also doesn't work. i've tryied to cahnge port to 5500 - no result. but at the same time the
[oracle@test adump]$ emctl status dbconsole
TZ set to US/Eastern
Oracle Enterprise Manager 10g Database Control Release 10.2.0.3.0
Copyright (c) 1996, 2006 Oracle Corporation. All rights reserved.
http://localhost.worldwide.com:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is running.
in /oracle/ora10g2/localhost.worldwide.com_test/sysman/log/emagent.log
2007-10-15 17:49:02 Thread-4136184480 Starting Agent 10.1.0.5.1 from /oracle/ora10g2 (00701)
2007-10-15 17:49:03 Thread-4136184480 EMAgent started successfully (00702)
in emagent.trc:
2007-10-15 17:49:02 Thread-4136184480 ERROR util.files: ERROR: nmeufis_new: failed in lfiopn on file: /oracle/ora10g2/localhost.worldwide.com_test/sysman/emd/agntstmp.txt. error = 2 (No such file or directory)
2007-10-15 17:49:02 Thread-4136184480 WARN main: clear collection state due to OMS_version difference
2007-10-15 17:49:02 Thread-4136184480 WARN command: Job Subsystem Timeout set at 600 seconds
2007-10-15 17:49:02 Thread-4136184480 WARN upload: Upload manager has no Failure script: disabled
2007-10-15 17:49:02 Thread-4136184480 WARN upload: Recovering left over xml files in upload directory
2007-10-15 17:49:02 Thread-4136184480 WARN upload: Recovered 0 left over xml files in upload directory
2007-10-15 17:49:02 Thread-4136184480 WARN metadata: Metric Disk_Path does not have any data columns
2007-10-15 17:49:02 Thread-4136184480 WARN metadata: Metric osm_diskGroupPolicies does not have any data columns
2007-10-15 17:49:03 Thread-4136184480 WARN TargetManager: Regenerating all Metadata
2007-10-15 17:49:03 Thread-4136184480 WARN collector: the column name DiskActivityavwait in this condition does not exist
2007-10-15 17:49:03 Thread-4136184480 ERROR collector: nmecs_validateStateFile(): state file invalid : /oracle/ora10g2/localhost.worldwide.com_test/sysman/emd/state/snapshot
2007-10-15 17:49:03 Thread-4136184480 ERROR collector: Collector state files cleaned, severity will be resent
2007-10-15 17:49:03 Thread-4111461296 ERROR upload: Error in uploadXMLFiles. Trying again in 60.00 seconds.
in emoms.log:
2007-10-15 17:47:42,171 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.tip.oem.central.instance.ProcessConnectInstanceIntg
2007-10-15 17:47:42,174 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.webdb.admin.em.PortalIntegration
2007-10-15 17:47:42,175 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.webdb.admin.em.SSOIntegration
2007-10-15 17:47:42,177 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.reports.em.RepIntg
2007-10-15 17:47:42,179 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsEmailIntegration
2007-10-15 17:47:42,180 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOidIntegration
2007-10-15 17:47:42,182 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsOvfIntegration
2007-10-15 17:47:42,183 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWebconfIntegration
2007-10-15 17:47:42,185 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsWirelessIntg
2007-10-15 17:47:42,196 [Orion Launcher] ERROR app.ContextInitializer contextInitialized.272 - Integration Class not found: oracle.sysman.ocs.mntr.target.OcsCalGrpIntegration
2007-10-15 17:49:03,029 [OmsServiceDriver thread] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.513 - Number of HB error responses received = 1
2007-10-15 17:49:03,060 [OmsServiceDriver thread] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.522 - ERROR 0 EMD_URL = http://localhost.worldwide.com:3938/emd/main CODE = 0 MSG = ORA-01403: no data found
2007-10-15 17:49:13,133 [OmsServiceDriver thread] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.513 - Number of HB error responses received = 1
2007-10-15 17:49:13,134 [OmsServiceDriver thread] ERROR emdrep.pingHBRecorder updateEMDListHeartBeat.522 - ERROR 0 EMD_URL = http://localhost.worldwide.com:3938/emd/main CODE = 0 MSG = ORA-01403: no data found
If anyone knows how to get it worked, please let me know.
Thanks beforehand.
M.

2007-10-15 17:49:02 Thread-4136184480 WARN main: clear collection state due to OMS_version differenceThere may also be other problems. Could you explain in detail your setup. What have you done so far to the database and console ?

Similar Messages

  • Page naviagation doesn't work after deploy ADF application to Weblogic

    After deploy my ADF application (ear) to Weblogic Server, the page navigation doesn't work. When running the ear on weblogic, I got following warnings:
    <2010-11-5 下午05时06分01秒 CST> <Warning> <J2EE> <BEA-160195> <The application version lifecycle event listener oracle.security.jps.wls.listeners.JpsAppVersionLifecycleListener is ignored because the application HwtOrder is not versioned.>
    <2010-11-5 下午05时06分38秒 CST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=AppApplicationOverviewPage&AppApplicationOverviewPortlethandle=com.bea.console.handles.AppDeploymentHandle%28%22com.bea%3AName%3DHwtOrder%2CType%3DAppDeployment%22%29.>
    <2010-11-5 下午05时07分33秒 CST> <Warning> <netuix> <BEA-423420> <Redirect is executed in begin or refresh action. Redirect url is /console/console.portal?_nfpb=true&_pageLabel=DiagnosticsViewDomainLogTablePage&DiagnosticsViewDomainLogTablePortlethandle=com.bea.console.handles.LogDispatchHandle%28%22DefaultServer%3BDomainLog%22%29.>
    I can run the application correctly in jdeveloper 11g environment. I think there is something wrong with deployment. Can anyone help me?

    When you target url with .jspx, you are running the page itself, not in the task flow context, so navigation doesn't work.
    In the task flow, your page has 'Activity ID' (which is, for example, 'mainPage' for mainPage.jspx) and the navigation is defined for activity IDs, not pages.
    Pedja

  • Adobe Javascript buttons does not work after deploying by ADS

    Hi,
    I have a dynamic PDF with adobe javascript " addInstance (1) ". In the preview of Adobe Lifecycle the PDF works like it should. However when I deploy the PDF in Developer studio the button is working anymore. It looks like the PDF isnt dynamic after deployment.
    I have tried to add the following code , but it isnt working:
    IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm1");
    iForm1.setDynamicPDF(true);
    Also, the properties of the PDF is set to Interactief Form, and XDP preview format is Dynamic PDF.
    Does anyone know what the problem is?
    Thank in advance.
    Thaibinh
    Application details:
    Acrobat Reader 7.0.9 and higher
    Adobe Live cycle 7.1
    Developer studio S 7.0.13
    AdobeControl version  6.3018.0.1
    Type browser Internet Explorer 6.0
    Operation system Linux
    Type of interact form ACF
    Netweaver 2004s

    Hi Harman,
    Am i inserting the code at the correct spot?
    //@@begin javadoc:wdDoModifyView
    Hook method called to modify a view just before rendering.
    This method conceptually belongs to the view itself, not to the
    controller (cf. MVC pattern).
    It is made static to discourage a way of programming that
    routinely stores references to UI elements in instance fields
    for access by the view controller's event handlers, and so on.
    The Web Dynpro programming model recommends that UI elements can
    only be accessed by code executed within the call to this hook method.
    @param wdThis Generated private interface of the view's controller, as
           provided by Web Dynpro. Provides access to the view controller's
           outgoing controller usages, etc.
    @param wdContext Generated interface of the view's context, as provided
           by Web Dynpro. Provides access to the view's data.
    @param view The view's generic API, as provided by Web Dynpro.
           Provides access to UI elements.
    @param firstTime Indicates whether the hook is called for the first time
           during the lifetime of the view.
      //@@end
      public static void wdDoModifyView(IPrivateInfosessieenqueteView wdThis, IPrivateInfosessieenqueteView.IContextNode wdContext, com.sap.tc.webdynpro.progmodel.api.IWDView view, boolean firstTime)
        //@@begin wdDoModifyView
         if (firstTime) {
         IWDInteractiveForm iForm1 = (IWDInteractiveForm)view.getElement("InteractiveForm");
         iForm1.setDynamicPDF(true);
        //@@end

  • CmcApp don't work after deployment on SAP Netweaver 7.0

    Hello,
    I've installed BOE XI3.1sp3 and after installation deployed Web Components to SAP Netweaver 7.0Ehp1. After deployment, I've try to launch CMC application in web browser. The url is http://<j2ee_server>:<j2ee_port>/CmcApp.
    Logon screen looks good, but after succesful login I recieved page with unreadable symbols.
    It's looks like  ? э=is Ч??Щ_б??HpMт / t? hСс  fd? 5Ф4?  3№Ь?? (whole page of such symbols).............
    InvoViewApp works good.
    Please, help me!!!
    Thanks in advance.
    Anton.

    The problem is resolved. Note 1342545
    1. Launch the Visual Administrator.
    2. Connect to the SAP J2EE Engine by clicking Connect -> Login, select the appropriate connection, and click on the Connect button. Enter the password and click on the Connect button.    
    3. Navigate to the HTTP Provider service by going to the Cluster tab, expanding Server, expanding Services, and clicking on HTTP Provider.
    4. On the right side of the screen, click on the Properties tab.
    5. Click on the AlwaysCompressed key. At the bottom of the screen in the Value field, remove "text/html" (without the quotes). Click on Update.
    6. Click on the NeverCompressed key. At the bottom of the screen in the Value field, add "text/html" (without the quotes). Click on Update.
    7. At the top of the screen, click on the Save Properties button. 
    8. Restart the NetWeaver server.

  • /portlets?WSDL no longer works after deployment

    Hi, after deploying my app I used to get a WSDL at http://host:port/myapp/portlets?WSDL but now it is no longer there. Any ideas on what happened? Thanks!

    any news after two months kenth ?
    lots have same problem (me too)
    did not find a solution yet ...

  • Cannot run the code from local machine - works after deployment!!!

    Hi,
    I am totally new to application server. My problem is that the application code after it is 'deployed' from JDeveloper to Oracle Application Server - it works fine. I can go to the web application from the url and do a 'Submit' of forms and it works fine. The problem comes when I try to connect to dev. environment from local machine and try to do a 'Submit' (done for debugging purposes), I get a 500 Internal Server Error. Is there a configuration file or property I file I have to change? I am clueless.
    Basically addRequest can be considered as the 'Submit'.
    Javax.faces.FacesException: #{newRequestItem.addRequest}: javax.faces.el.EvaluationException: java.lang.IllegalAccessError: tried to access class javax.xml.rpc.FactoryFinder from class javax.xml.rpc.ServiceFactory
    At com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:98)
    My application is built on ADF and JSF and connects to BPEL workflow and DRM. So it is using WebServices.
    Thanks.

    Hi,
    Top further pinpoint the issue, I can make the SSRS report work with the stored procedure by running
    SP_recompile 'myStoredProcedure'
    So, SQL Server has somehow messed up the execution plan for the sproc. But to repeat, executing the Sproc in Management Studio works just fine, I just look the exact sproc and parameters with SQL Profiler when it is not working in SSRS report, then run that
    same sproc manually and it works.
    After extensive debugging, it seems to raise from one specific SELECT row:
    SELECT
    cte.TIMEYEAR + 1 AS TIMEYEAR,
    where cte.TIMEYEAR is varchar. After changing that to
    SELECT
    CAST(cte.TIMEYEAR + 1 AS VARCHAR) AS TIMEYEAR,
    it started to work.
    What will probably remain forever unclear is that WHY the original select always breaks every now and then, and always starts to work with a simple sp_recompile. I could reproduce the error easily by running
    exec sp_msforeachtable @command1="EXEC sp_recompile '?'";
    after which the sproc raised error: "Conversion failed when converting nvarchar value 'Q1/2000' to data type int".
    ..aaaand then just by running SP_recompile 'myStoredProcedure' it again started working fine. I could reproduce this break & fix pair coherently.
    Still it makes no sense from SSRS report perspective, when sproc was broken in Management Studio query, it was always broken from SSRS report end as well, but sometimes when sproc was working from SSMS, it wasn't working from SSRS.

  • Application not working after deployment in remote server

    I have a standard web application working in my localhost. But when I deploy the same in a remote server it gives the following exception. This happens for all the jsp:useBean. why is the container not able to fund the Beans. The Tomcat is installed properly and I use it's manager tool to deploy the WAR.
    I checked the WEB-INF/lib directory and it has all the required JARs.
    Error:
    org.apache.jasper.JasperException: Exception in JSP: /test/CurWeatherBean.jsp:22
    19:         <a href="index.jsp">[ index ]</a>
    20:        
    21:         <h2>CurrentWeatherMapBean.ATOMICS</h2>
    22:         <jsp:useBean id="cwmDAO" class="com.news.pub.weather.CurWeatherBean$ATOMICS" scope="request"/>       
    23:         <ul>
    24:             <li>
    25:                 <h3>List<CurWeatherBean> get()</h3>
    Stacktrace:
         org.apache.jasper.servlet.JspServletWrapper.handleJspException(JspServletWrapper.java:506)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:395)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
    root cause
    java.lang.NullPointerException
         com.news.pubt.forc.oc.Container.getReference(Container.java:68)
         com.news.pubt.forc.cfg.PropertyBag.getBag(PropertyBag.java:80)
         com.news.pubt.forc.cfg.PropertyBag.getProperty(PropertyBag.java:60)
         com.news.pubt.atomicsbeans.impl.ATOMICSBean.<init>(ATOMICSBean.java:61)
         com.news.pubt.atomicsbeans.ATOMICSAwareBean.<init>(ATOMICSAwareBean.java:175)
         com.news.pubt.weather.CurWeatherBean$ATOMICS.<init>(CurWeatherBean.java:131)
         org.apache.jsp.test.CurWeatherBean_jsp._jspService(CurWeatherBean_jsp.java:65)
         org.apache.jasper.runtime.HttpJspBase.service(HttpJspBase.java:97)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)
         org.apache.jasper.servlet.JspServletWrapper.service(JspServletWrapper.java:334)
         org.apache.jasper.servlet.JspServlet.serviceJspFile(JspServlet.java:314)
         org.apache.jasper.servlet.JspServlet.service(JspServlet.java:264)
         javax.servlet.http.HttpServlet.service(HttpServlet.java:802)Please help me.
    Edited by: danbrown on Feb 8, 2008 8:32 AM

    Your error stack refers to a class with the package sequence "com.news.pubt.weather....." but your jsp file refers to a class "com.news.pub.weather...
    Is there an error in your jsp page? If so, did you change the package name, and do you still have old class files on the classpath on your local machine with the old name?
    Anyway, the top of the error stack refers to line number 68 in the Container class. So that is where you should see a problem regarding the NullPointerExcpetion. You could post that line of code.

  • Web UI does not work after deployment of BBPCRM SP for CRM 7

    Hello!
    I just applied SP 2 for BBPCRM in our CRM 7 system and after that our web ui does not start correctly.
    We can log in and choose a business role, but the we get the following error in the browser
    Service cannot be reached
    What has happened?
    URL http://host.intranet.org:8061/sap_!DOCTYPE html PUBLIC"-//W3C//DTD HTML 4.01Transitional//EN"__html__head__title_Logon Error Message_/title__META http-equiv="Content-Type" content="text/html/css"_body { font-family:tahoma,helvetica,sans-serif call was terminated because the corresponding service is not available.
    Note
    The termination occurred in system CRD with error code 404 and for the reason Not found.
    The selected virtual host was 0 .
    What can I do?
    Please select a valid URL.
    If you do not yet have a user ID, contact your system administrator.
    ErrorCode:ICF-NF-http-c:000-u:SAPSYS-l:K-i:host_CRD_61-v:0-s:404-r:Notfound
    HTTP 404 - Not found
    Your SAP Internet Communication Framework Team
    It does not make any entries in the system log, but I found the following in the ICM log
    Thu Mar 12 07:51:02 2009
    *** ERROR => URLDecode recognised invalid sign in form field [ictxxfilt.c  248]
    *** ERROR => illegal request {00030882} [http_auth.c 494]
    Address    Offset  REQUEST:                                                    
    Has anbody else encountered this error and how did you solve it?
    I'm not really sure it is related to the BBPCRM package, it could be related to SAP WEBCUIF 700 package that had to be applied before BBPCRM SP 2.
    Regards
    rollo

    Hello!
    I just solved it!
    I found that the SAP/webcuif services was disabled, if it was the SP that caused it or not, I don't know, but when I enabled it everything started to work!
    Regards
    rollo

  • CMC does not work after deploying to Websphere

    Description of Problem or Question:
    We have an installation of BO XI R2 SP2 on Tomcat (default installation).
    Now we installed Websphere Application Server 6.0 on the same server and deployed BO war files on it.
    The existing installation of Infoview & CMC on Tomcat works as it did before.
    But, CMC that runs on Websphere does not work.
    Product\Version\Service Pack\Fixpack (if applicable):
    Business Objects XI R2 - Service Pack 2
    Tomcat 5.0.27 (installed by default)
    Websphere Application Server 6.0.0.2
    Relevant Environment Information (OS & version, java or .net & version, DB & version):
    Windows 2003 Server R2, Enterprise Edition, SP2
    Sporadic or Consistent (if applicable):
    Consistent
    Steps to Reproduce (if applicable):
    Followed all the steps mentioned in "Deploying on WebSphere" section of "xir2_bip_install_en.pdf"
    Deployed the following war files from the following location in the order mentioned with context roots as listed.
    C:\Program Files\Business Objects\BusinessObjects Enterprise 11.5\java\applications\sp2updates
    webcompadapterSP2.war /businessobjects
    jsfadminSp2.war /jsfadmin
    jsfplatform.war /jsfplatform
    adminSP2.war /businessobjects/enterprise115/adminlaunch
    desktopSP2.war /businessobjects/enterprise115/desktoplaunch
    stylesSP2.war /styles
    http://localhost:9080/businessobjects/enterprise115/desktoplaunch
    Infoview works as expected.
    http://localhost:9080/businessobjects/enterprise115/admin
    CMC doesnot work. IE Says "HTTP 500 Internal Server Error".
    What has already been tried (where have you searched for a solution to your question/problem):
    On searching the web-forums, I found this:
    http://www.forumtopics.com/busobj/viewtopic.php?t=112151
    So, I tried to install WCA for Websphere. The scenario mentioned in that article deals with new installation of BO.
    But, since ours is an existing installation, I cannot install WCA for websphere.
    I do not want to re-install BO.
    Please advise.
    Thanks,
    Chris

    Hi,
    The following is the log created when I try to open CMC.
    com.ibm.ws.webcontainer.webapp.WebApp logServletError SRVE0293E: [Servlet Error]-[wccontroller]: java.lang.NoClassDefFoundError: javax.servlet.http.HttpServletRequestWrapper
    at com.ibm.oti.vm.VM.findClassOrNull(Native Method)
    at com.ibm.oti.vm.BootstrapClassLoader.loadClass(BootstrapClassLoader.java:62)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:633)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
    at sun.misc.Launcher$AppClassLoader.loadClass(Launcher.java:300)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:363)
    at org.eclipse.osgi.framework.internal.core.BundleLoader.findClass(BundleLoader.java:347)
    at org.eclipse.osgi.internal.baseadaptor.DefaultClassLoader.loadClass(DefaultClassLoader.java:83)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:635)
    at com.ibm.ws.bootstrap.ExtClassLoader.loadClass(ExtClassLoader.java:90)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:62)
    at com.ibm.ws.classloader.ProtectionClassLoader.loadClass(ProtectionClassLoader.java:58)
    at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    at com.ibm.ws.classloader.CompoundClassLoader.loadClass(CompoundClassLoader.java:466)
    at java.lang.ClassLoader.loadClass(ClassLoader.java:609)
    at java.lang.J9VMInternals.verifyImpl(Native Method)
    at java.lang.J9VMInternals.verify(J9VMInternals.java:72)
    at java.lang.J9VMInternals.initialize(J9VMInternals.java:134)
    at com.businessobjects.enterprise.wca.servlets.WCAControllerServlet.init(Unknown Source)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.init(ServletWrapper.java:325)
    at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.init(ServletWrapperImpl.java:165)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:628)
    at com.ibm.ws.webcontainer.servlet.ServletWrapper.handleRequest(ServletWrapper.java:443)
    at com.ibm.ws.webcontainer.servlet.ServletWrapperImpl.handleRequest(ServletWrapperImpl.java:175)
    at com.ibm.ws.webcontainer.webapp.WebApp.handleRequest(WebApp.java:3610)
    at com.ibm.ws.webcontainer.webapp.WebGroup.handleRequest(WebGroup.java:274)
    at com.ibm.ws.webcontainer.WebContainer.handleRequest(WebContainer.java:926)
    at com.ibm.ws.webcontainer.WSWebContainer.handleRequest(WSWebContainer.java:1557)
    at com.ibm.ws.webcontainer.channel.WCChannelLink.ready(WCChannelLink.java:173)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleDiscrimination(HttpInboundLink.java:455)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.handleNewInformation(HttpInboundLink.java:384)
    at com.ibm.ws.http.channel.inbound.impl.HttpInboundLink.ready(HttpInboundLink.java:272)
    at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.sendToDiscriminators(NewConnectionInitialReadCallback.java:214)
    at com.ibm.ws.tcp.channel.impl.NewConnectionInitialReadCallback.complete(NewConnectionInitialReadCallback.java:113)
    at com.ibm.ws.tcp.channel.impl.AioReadCompletionListener.futureCompleted(AioReadCompletionListener.java:165)
    at com.ibm.io.async.AbstractAsyncFuture.invokeCallback(AbstractAsyncFuture.java:217)
    at com.ibm.io.async.AsyncChannelFuture.fireCompletionActions(AsyncChannelFuture.java:161)
    at com.ibm.io.async.AsyncFuture.completed(AsyncFuture.java:138)
    at com.ibm.io.async.ResultHandler.complete(ResultHandler.java:202)
    at com.ibm.io.async.ResultHandler.runEventProcessingLoop(ResultHandler.java:766)
    at com.ibm.io.async.ResultHandler$2.run(ResultHandler.java:896)
    at com.ibm.ws.util.ThreadPool$Worker.run(ThreadPool.java:1527)

  • PHP scripts are not working after deploying it on website

    Hi,
    I have recently deployed my flex application on a web hosting (000webhost.com) and now my application is getting launched properly. Visit (www.kpratik.webatu.com).
    I have used PHP script to interact with database MySQL. Locally everything was working fine but when I have deployed it to internet my PHP scripts are not working and any database opeartion is not getting performed. I have already chaned to host, username password in the PHP file as given my service provider.
    Please let me know if you have any input on this.
    Reponse will be highly appreciated.
    Regards,
    Pratik

    Hello,
    Ok let me explain you where exactly it is going wrong.
    I am constructing SQL query in my ActionScript code and I am passing this query to my PHP script using HTTPService. Now when I am hardcoing the query in PHP script i found it is working perfectly which means my query is not getting passed to PHP script.
    Please let me know what could be the reason.
    I am using POST method for HTTPService.
    Thanks,
    Pratik

  • Creative Console Launcher not working after Vista Ultimate upgr

    I have a Dell XPS700 with the Creative SB X-Fi soundcard and fi've speakers. Surround Sound for MP3, WAV, TV etc Was working great under Win XP Pro SP2. Now, I can't seem to configure the rear speakers. When I go to Start - All Programs - Sound Blaster X-Fi - Creative Console Launcher, I get a "The console for the current mode of your audio device cannot be launched." message and I cannot select the Entertainment Mode.

    Actually, you need to/should update your drivers (Creative *has* Vista-ready drivers for the X-Fi, including a new Audio Console). The only cards that Creative does *not* have Vista drivers for are cards *older* than the base Audigy (the only relati'vely new card affected is the Audigy SE). The base Audigy (in fact, *all* Audigy-series except the SE) has Vista beta drivers available (and a new Audio Console is part of the package).

  • Imessage doens't work after data limits set

    I just set up data limits on my daughter's phone, but now we cannot imessage each other. Our messages to each other will only go through as text messages. However, we can both imessage other people. How do I fix that?

    iMessage uses data in order to transmit messages.  To find out what's going on, go into your settings, select messages and type out what you see.  If you want to try a quick fix, turning imessaging off and back on is a generic option to try and fix intermittent issues.  If that doesn't work, list your settings in messages here for me please!

  • PortalDesktop doen't work after transport

    Dear all
    I created a portal desktop in dev..it works fine with role rule collection.
    I transported that objects to QA.. and i added IFCondition like with Role in Master rule collection in QA..When i try to login ..it says
    Error occurred while trying to access desktop: "portal_content/Folder.xyz/com.company.MyNewPortalDesktop/MyDesktop". The object does not exist or you are not authorized to access it. If this problem persists, contact your system administrator.
    What would be the problem?
    Pl suggest me
    rgds
    pradeep

    hi pradeep
    is the default framework page is added in ur desktop?
    also check the portal permission for ur desktop . is the end user has the permission to access it.
    system administration ->permission  locate ur desktop
    portal_content/Folder.xyz/com.company.MyNewPortalDesktop/MyDesktop
    right click and check the permission .
    regards,
    kaushal

  • SOA Suite 10.1.3.4 BPEL Console not working after install the mlr#4 patch

    After install the mlr#4 patch for 10.1.3.4 version the BPEL console dos not work. The BEPL is up and running , I can deploy projects, all domains are fine and working (I see on the logs) but the console show the following error:
    Oracle BPEL Process Manager Full Cycle
    An unexpected error has occurred while executing your request. This is most likely related to a defect in the Oracle BPEL Process Manager product. We apologize you can post the error to the OTN forum and we will get back to you as soon as possible.
    Build Information:
    Oracle BPEL Server version 10.1.3.4.0
    Build: 0
    Build time: Sun Jan 11 19:33:46 PST 2009
    Build type: release
    Source tag: PCBPEL_10.1.3.4.0MLR#4_GENERIC_RELEASE
    Exception Message:
    javax.servlet.ServletException - com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
    When I check the log I can see this:
    <MESSAGE>
    <HEADER>
    <TSTZ_ORIGINATING>2009-01-26T16:18:33.115+02:00</TSTZ_ORIGINATING>
    <COMPONENT_ID>j2ee</COMPONENT_ID>
    <MSG_TYPE TYPE="ERROR"></MSG_TYPE>
    <MSG_LEVEL>1</MSG_LEVEL>
    <HOST_ID>soasit.BCR.WAN</HOST_ID>
    <HOST_NWADDR>172.19.128.128</HOST_NWADDR>
    <MODULE_ID>security</MODULE_ID>
    <THREAD_ID>15</THREAD_ID>
    <USER_ID>oracle</USER_ID>
    </HEADER>
    <CORRELATION_DATA>
    <EXEC_CONTEXT_ID><UNIQUE_ID>1232979513:172.19.128.128:4415:0:247</UNIQUE_ID><SEQ>1</SEQ></EXEC_CONTEXT_ID>
    </CORRELATION_DATA>
    <PAYLOAD>
    <MSG_TEXT>ServletException cause</MSG_TEXT>
    <SUPPL_DETAIL><![CDATA[java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
         at com.oracle.bpel.client.util.ExceptionUtils.handleServerException(ExceptionUtils.java:91)
         at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:236)
         at _ngDeployedProcesses._jspService(_ngDeployedProcesses.java:118)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_include(ServletRequestDispatcher.java:160)
         at com.evermind.server.http.ServletRequestDispatcher.access$000(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$1.oc4jRun(ServletRequestDispatcher.java:97)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
         at com.evermind.server.http.ServletRequestDispatcher.include(ServletRequestDispatcher.java:102)
         at com.evermind.server.http.EvermindPageContext.include(EvermindPageContext.java:456)
         at _index._jspService(_index.java:104)
         at com.orionserver.http.OrionHttpJspPage.service(OrionHttpJspPage.java:59)
         at oracle.jsp.runtimev2.JspPageTable.service(JspPageTable.java:462)
         at oracle.jsp.runtimev2.JspServlet.internalService(JspServlet.java:594)
         at oracle.jsp.runtimev2.JspServlet.service(JspServlet.java:518)
         at javax.servlet.http.HttpServlet.service(HttpServlet.java:856)
         at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:64)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:623)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.ServletRequestDispatcher.unprivileged_forward(ServletRequestDispatcher.java:259)
         at com.evermind.server.http.ServletRequestDispatcher.access$100(ServletRequestDispatcher.java:51)
         at com.evermind.server.http.ServletRequestDispatcher$2.oc4jRun(ServletRequestDispatcher.java:193)
         at oracle.oc4j.security.OC4JSecurity.doPrivileged(OC4JSecurity.java:284)
         at com.evermind.server.http.ServletRequestDispatcher.forward(ServletRequestDispatcher.java:198)
         at com.collaxa.cube.fe.DomainFilter.doFilter(DomainFilter.java:230)
         at com.evermind.server.http.EvermindFilterChain.doFilter(EvermindFilterChain.java:15)
         at oracle.security.jazn.oc4j.JAZNFilter$1.run(JAZNFilter.java:400)
         at java.security.AccessController.doPrivileged(Native Method)
         at javax.security.auth.Subject.doAsPrivileged(Subject.java:517)
         at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:414)
         at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:621)
         at com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:370)
         at com.evermind.server.http.HttpRequestHandler.handleNotFound(HttpRequestHandler.java:1042)
         at com.evermind.server.http.HttpRequestHandler.doProcessRequest(HttpRequestHandler.java:911)
         at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:453)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:313)
         at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:199)
         at oracle.oc4j.network.ServerSocketReadHandler$SafeRunnable.run(ServerSocketReadHandler.java:260)
         at com.evermind.util.ReleasableResourcePooledExecutor$MyWorker.run(ReleasableResourcePooledExecutor.java:303)
         at java.lang.Thread.run(Thread.java:595)
    Caused by: java.lang.NoSuchMethodException: com.collaxa.cube.ejb.impl.BPELProcessManagerBean.getDefaultRevision(com.oracle.bpel.client.BPELProcessId, com.oracle.bpel.client.auth.DomainAuth)
         at java.lang.Class.getMethod(Class.java:1581)
         at com.evermind.server.ejb.interceptor.MethodStateFactory.createMethodState(MethodStateFactory.java:112)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.createMethodStates(ExposableBeanDescriptor.java:657)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getRemoteComponentMethodStates(ExposableBeanDescriptor.java:723)
         at com.evermind.server.ejb.deployment.ExposableBeanDescriptor.getMethodState(ExposableBeanDescriptor.java:599)
         at com.evermind.server.ejb.AbstractEJBObject.OC4J_getMethodState(AbstractEJBObject.java:385)
         at ProcessManagerBean_RemoteProxy_4bin6i8.getMetaData(Unknown Source)
         at com.oracle.bpel.client.BPELProcessHandle.getMetaData(BPELProcessHandle.java:232)
         ... 52 more
    ]]></SUPPL_DETAIL>
    </PAYLOAD>
    </MESSAGE>
    If I rollback the mlr#4 , everithink works fine. With mlr#3, mlr#2 the problem is the same.
    The platform is one for development installer on RedHat 5 OS.
    Any ideea ?
    Edited by: [email protected] on Jan 26, 2009 4:34 PM

    Man Christian!
    1000 Thanks for your tip. I run into same issue on W2K3 with 10.1.3.4 MLR#4 (so far last MR allowed for AIA apps).
    I had the orabepl.ear file of the size as was mentioned earlier: 2.530.260 in the bpel\system and other one on the j2ee\ocj4_soa\applications folder.
    Copying did not help.
    I had to perform following steps from the <MLR#4>/custom/scripts/post.bat file which takes the file from the bpel\system,
    ADDS some another .jars in it and ONLY THEN move it to the j2ee\...\applications folder:
    copy %ORACLE_HOME%\bpel\system\j2ee\orabpel.ear %ORACLE_HOME%\bpel\system\services\lib\orabpel.ear
    copy %ORACLE_HOME%\bpel\system\j2ee\ejb\oc4j_ejb_services.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_services.jar
    copy %ORACLE_HOME%\bpel\system\j2ee\ejb\ejb_ob_engine_oc4j.jar %ORACLE_HOME%\bpel\system\services\lib\ejb_ob_engine.jar
    cd %ORACLE_HOME%\bpel\system\services\lib
    %ORACLE_HOME%\jdk\bin\jar -uvf orabpel.ear ejb_services.jar ejb_ob_engine.jar
    After doing manually these steps the orabpel.ear in j2ee\...\applications has got the size: 2.798.840 which was bigger as right after patch application.
    Then I deleted the orabpel folder from the j2ee\...\aplication-deployments
    started the j2ee containe (it was named: oc4_soa ) and the BPEL Console started live well as before in 10.1.3.3
    As I did verify from other files The rest of steps from the post.bat file seems did well, only this part was not executed.
    With Best Regards,
    Alexey

  • Weblogic console not work after JDK reinstalled

    Hi all:
    After i reinstalled JDK 1.3.1, the weblogic console doesn't work any
    more. Previously i am using jdk1.3, and the console works.
    Weblogic server itself can run without any effect. But now when i
    click console in windows startup menu, the error msg is "WEblogic Err
    Occurred: Java dll not found. Bad value for JAVA_HOME................".
    After i copied javai.dll into the every possible folder, it still
    compliants this error.
    What is happenning here? Do i have to reinstall weblogic? Actullay i
    try to do that, but weblogic asks me to remove the previous installation
    first, and make sure to remove some windows registration
    items..............headache!
    Does any one know how to get around this? Seems the sonsole is using
    windows specific infor inclduing dll and registration.......etc.
    Thanks.
    minjiang

    Ok, partly i solved the problem. Now i can run weblogic console by using
    startconcole.cmd file, not the other one called weblogic\bin\wlconsolew.exe
    (although previously i can).
    Don't know what caused this.
    Thanks.
    minjiang
    minjiang wrote:
    Hi all:
    After i reinstalled JDK 1.3.1, the weblogic console doesn't work any
    more. Previously i am using jdk1.3, and the console works.
    Weblogic server itself can run without any effect. But now when i
    click console in windows startup menu, the error msg is "WEblogic Err
    Occurred: Java dll not found. Bad value for JAVA_HOME................".
    After i copied javai.dll into the every possible folder, it still
    compliants this error.
    What is happenning here? Do i have to reinstall weblogic? Actullay i
    try to do that, but weblogic asks me to remove the previous installation
    first, and make sure to remove some windows registration
    items..............headache!
    Does any one know how to get around this? Seems the sonsole is using
    windows specific infor inclduing dll and registration.......etc.
    Thanks.
    minjiang

Maybe you are looking for