OEM discovers HTTP server but with wrong port

Oracle 9i
OEM discovers all my nodes but shows my HTTP server running on port 80 when it's actually on 7777. How to correct this? Where is OEM getting port 80 from? I have looked at the httpd.conf and other config files and can't locate the problem. Please help.
Thanks
Dave

David,
Did you ever get this problem solved? I am having what sounds like the same thing.
In my case the http server discovered is at port 443 which is the SSL port. What should be there (I think) is 7777, the actual port.
Can anyone help?
Larry

Similar Messages

Restore database in the same server but with other sid (name)

i try to restore the database in the same server but with other sid (name) . The backup is on tape and
I want to know the steps I should follow.
thank.

To perform restore of database in same host to choose another DB name you can go for
1) duplicate using RMAN.
Directory structure should be different so take care of db_file_name_convert & log_file_name_convert parameters
Also check the Tns services exactly is it pointing to target & auxiliary
http://www.shutdownabort.com/quickguides/clone_rman.php
http://www.oracle-base.com/articles/9i/DuplicateDatabaseUsingRMAN9i.php

MAIL 1.3.11: server error with the port 110

I have 10.3.9 with MAIL 1.3.11 and I can't conect to the server with the port 110... why does it happens? how i fix that? thanx

I don't understand your obsession with overstuffed mailboxes.
What are you talking about? As I told you in a previous post, Mail sometimes chokes on a message it cannot download and that prevents it from downloading the rest as well. This is a relatively common problem. It has absolutely nothing to do with overstuffed mailboxes.
The two servers are failing to connect.
This is wrong! And which two servers are you talking about? According to the activity information you reported, Mail is connecting to the POP server, but failing to download the messages it sees there for some reason...
If you want to mess with the contents of your ~/Library/Mail/ folder (which you said in your first post you didn’t want to do), there are a couple of things you may try as well.
For POP accounts, Mail uses a file within the account folder to keep track of which messages have already been downloaded. Deleting that file causes Mail to treat everything still on the server as if new and try to download it again:
1. Quit Mail.
2. In the Finder, go to ~/Library/Mail/POP-username@mailserver/.
3. Locate one or two files named MessageUidsAlreadyDownloaded and move them to the Trash. Mail 1.x used MessageUidsAlreadyDownloaded to keep track of which messages had already been downloaded. Mail 2.x uses MessageUidsAlreadyDownloaded2 for the same purpose.
Note: For those not familiarized with the ~/ notation, it refers to the user’s home folder, i.e. ~/Library is the Library folder within the user’s home folder.

Http server configuration with mod_ntlm and mod_plsql

I don't know if this is the right place to ask, but I will try anyway. We are trying to configure Oracle http server to use mod_ntlm to authenticate users for html-db application. After we configure the server to use mod_ntlm for mod_plsql content(pls), all the requests failed with 400 Bad Requests error. It looks like the mod_plsql does not recognize the http header for NTLM authentication(which is encrypted). Anyone knows how to make mod_ntlm and mod_plsql work together in oracle http server(i.e. Apache)? Thanks.

sorry, 291509, but this is the wrong forum for your question. one of these forums is used to determine the appropriate forums for posting. i'm, of course, not sure which one that is, but i'd start there if i were you.
regards,
raj

BEx abap query analyzer with wrong port in url adress

Hi
Starting TA RSRT you can open ABAP WEB query in separatly browser
window.
For that an url adress is generated.
Normaly it looks like <server>:8000/xxx.
One my workstation it works well & fine. In the other hand some of our
coleagues get url with a port 8100, what wrong is.
Could you explain this?
Many thanks for a feedback.
Bestr Regards
Franco

Hi Franco,
Strange... This should works or not for everybody.
Maybe you have a web dispatcher.Sometimes this is the root cause.
Well, first of all, check the note below:
>> 805344 - How URLs are generated automatically in BW
Ensure your system is correctly configured by this note.
Best Regards,
Edward John

Http server not running on port 8888

i installed the forms 9i against oracle 8i, i tried to run the form but receives error that http server is not running on port 8888 check services or change your runtime settings.
what to do?
Thanks in anticipation

Start the OC4J Instance. (there is a shortcut to this in your Oracle9iDS program group).

Http server prob with OWB10g installation

Hi frnds
I have oracle9i release 2 DB instance. and i installed new OWB 10g software. now what the problem is my database http server is not running. In services the http server services is stop after installing the 10g software. i need http server to run my browser components in warehouse builder software.
how i to come across this problem plz any body give tips.
is it better to install the OWB10g on oracle9i db.
in installation document it given in that way but my http server is stoped.

Set The value of NODEMGR_HOME properly in the file StartNodeManager.sh. This issue should be resolved!
Thanks,
Abhijit

Problme in http server configuration with different database version

I have two instances of oracle databases on two different machines.
1. Oracle 9i R 2 with default http server
2. Oracle 10 g with http server of Oracle 10 g AS.
Now the problem is that when i want to cross configure the http servers that is to configure http server of 9i R 2 data base with the 10g data base or vice versa. It give the following error.
Can not run. Capacity probem.................
Plz tell me that is there any pronle in these configuration. Is it possible to configure 9i http server with 10 g data base and vice versa If yes then why I am getting errors???

The entries of the log file are as under:
Tue Aug 07 05:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186444829:10.8.7.33:1968:7060:109,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186445129:10.8.7.33:1968:7016:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186445429:10.8.7.33:1968:7528:90,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186445729:10.8.7.33:1968:5872:128,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186446029:10.8.7.33:1968:2468:95,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186446329:10.8.7.33:1968:7236:136,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186446629:10.8.7.33:1968:536:116,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186446929:10.8.7.33:1968:3556:108,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:40:29 2007] [error] [client 10.8.7.33] [ecid: 1186447229:10.8.7.33:1968:6920:132,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:45:29 2007] [error] [client 10.8.7.33] [ecid: 1186447529:10.8.7.33:1968:7536:119,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:50:29 2007] [error] [client 10.8.7.33] [ecid: 1186447829:10.8.7.33:1968:5108:76,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 05:55:29 2007] [error] [client 10.8.7.33] [ecid: 1186448129:10.8.7.33:1968:668:121,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:00:29 2007] [error] [client 10.8.7.33] [ecid: 1186448429:10.8.7.33:1968:6640:129,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:05:29 2007] [error] [client 10.8.7.33] [ecid: 1186448729:10.8.7.33:1968:7324:123,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:10:29 2007] [error] [client 10.8.7.33] [ecid: 1186449029:10.8.7.33:1968:2168:81,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:15:29 2007] [error] [client 10.8.7.33] [ecid: 1186449329:10.8.7.33:1968:2320:166,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:20:29 2007] [error] [client 10.8.7.33] [ecid: 1186449629:10.8.7.33:1968:7320:114,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:25:29 2007] [error] [client 10.8.7.33] [ecid: 1186449929:10.8.7.33:1968:7528:96,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:30:29 2007] [error] [client 10.8.7.33] [ecid: 1186450229:10.8.7.33:1968:7580:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p
[Tue Aug 07 06:35:29 2007] [error] [client 10.8.7.33] [ecid: 1186450529:10.8.7.33:1968:668:124,0] File does not exist: c:/oraas/apache/apache/htdocs/pls/orasso/htp.p

User home directories create but with wrong permissions

Create user in OD.
User account shows up in the assigned Users directory, but with owner root and group admin. Users is on an Xsan volume. I get this in the log:
Nov 13 20:49:18 fsserver2 DirectoryTools[341]: copyDirectory(en, /Network/Servers/fsserver2.xxxxxxxx.com/Volumes/uservol/Users/mondtruong) failed with 1
Anyone?

Seems that this is only set at the Root folder, sub folders have the following.
This partly answers my question, but how can I see what those "custom" levels are.
I will be wanting to move my Home folder to another drive and want to make sure the permissions are set so that only the authorized user has access, without causing any issues with system access. So need to make sure I have all the permissions set right.
Thoughts?

Embedded http server problem with port 80

Hello Guys/Gals,
I have just installed the latest version of Oracle XE and APEX on redhat linux. I am trying to get rid of the 8080 port in my url. So I am trying to change my port to 80. I logged into pl/sql as system - exec dbms_xdb.sethttpport('80'); that seems to run fine. If I look at my lsnrctl status - I do not see the line for it listening on port 80 like it does when it's set to port 8080? I changed the owner of lsnrctl to root? I read that in an article to set port < 1024? Can someone please help me out. I am sure it's a permission thing but I can't figure it out. By the way everything works fine when the port is set to 8080 but???
Thanks,
Dan

Update I belive I got it to work. Here is what I think I did to make it work.
chown root:root $ORACLE_HOME/bin/tnslsnr
chmod 4755 tnslsnr
I logged into sqlplus as system -
exec dbms_xdb.sethttpport('80');
Then added the following line to the $ORACLE_HOME/network/admin/listener.ora LISTENER section
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = dpmsurf)(PORT = 80))
(PROTOCOL_STACK = (PRESENTATION = HTTP) (SESSION = RAW))
the stopped and started the listner
$ORACLE_HOME/bin/lsnrctl stop
$ORACLE_HOME/bin/lsnrctl start
Now I can run with out putting the port in the url .
Thanks,
Dpmsurf

Logon to WebGUI from Management Console with wrong Ports

Hello SDN,
I install the new SAP Management Console on my workstation. It works perfectly exept logon to abap through WebGUI.
If I cklick on to <SAP Logon...> from the context menue of the ABAP instanz, I get a browser with an URL http://<host>:50000/sap/bc/gui/sap/its/webgui. That doesn't work because the Port of ICM is 8000.
How I can setup the right port?
Many Thanks in advance
Vladimir

Hi,
many thanks for your answer, but something is not clear.
I call SAP MC with such URL http://server1:50013/sapmc/sapmc.html
The ABAP System that I want to logon is under the URL http://server2:8000/sap/bc/gui/sap/its/webgui reachable.
If I try to logon from SAP MC I get an URL http://server2:50000/sap/bc/gui/sap/its/webgui
ICM on server1
icm/server_port_0 is setup for HTTP 8000 on abap side(server2). This is ABAP only ERP 6.00 system
ICM on server2
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
icm/server_port_0 is setup for HTTP 80$$
The question is - what ICM use SAP MC in that case?
Where I schould maintene the ICM parameters?
Best regards
Vladimir

Windows 7 Recognizes Touch But With Wrong Properties

My Sony VAIO recognizes the iPod on "My Computer", but as an 8GB with no files. My Touch is a 16GB. I cannot transfer apps purchased from the PC to the Touch.
I have used all the diagnostics, and everything is fine except the connectivity test says, "no iPod found".
Any suggestions?

Some days after posting here, I asked this question at another Canon website, and learned that in circumstances similar to mine described here, Canon recommends that the MP560 "be connected to your Windows computer then shared to your Macintosh", rather than, as in my case, having the MP560 connected to the Mac and then shared with the Windows computers.

SolMan 4.0 - SCS instance allocates wrong ports

Hello,
we have a solution manager 4.0 installation on IBM iSeries (System i / AS 400).
Kernel is 700 with patch lvl 92/dbsl patch 70.
Central instance is number 50, scs instance is 51.
The system is running in so far that I can logon to it and transaction SICK reports no errors.
Examining the system more accurately revealed that the j2ee server is configured but not operational (transaction SMICM).
Looking at the running jobs, i see that jcontrol, msg_server and server0 are not running.
The developer trace of dev_ms of the central instance shows errors:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:28:07 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2547
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2547) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] ***LOG Q0I=> NiIBindSocket: bind (67: Address already in use) [nixxi.cpp 3173]
[Thr 1] *** ERROR => NiIBindSocket: SiBind failed for hdl 0 / sock 5
    (SI_EPORT_INUSE/67; I4; ST) [nixxi.cpp    3173]
[Thr 1] *** ERROR => MsSCommInit: NiBufListen(sapmsS01) (rc=NIESERV_USED) [msxxserv_mt. 10124]
[Thr 1] *** ERROR => MsSInit: MsSCommInit [msxxserv_mt. 1857]
[Thr 1] *** ERROR => main: MsSInit [msxxserv_mt. 5896]
[Thr 1] ***LOG Q02=> MsSHalt, MSStop (Msg Server 2547) [msxxserv_mt. 5944]
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The trace dev_ms of the scs instance is ok, but with wrong ports in my discretion:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
trc file: "dev_ms", trc level: 1, release: "700"
[Thr 1] Fri Aug 10 09:27:18 2007
[Thr 1] MsSOsPrivInit: Run priority adjusted to 12
[Thr 1] MsSSetTrcLog: trc logging active, max size = 20971520 bytes
systemid   324 (IBM iSeries with OS400)
relno      7000
patchlevel 0
patchno    87
intno      20050900
make:      multithreaded, Unicode, 64 bit, optimized
pid        2535
[Thr 1] ***LOG Q01=> MsSInit, MSStart (Msg Server 1 2535) [msxxserv_mt. 1824]
[Thr 1] SigISetDefaultAction : default handling for signal 20
[Thr 1] load acl file = /usr/sap/S01/SYS/global/ms_acl_info
[Thr 1] MsGetOwnIpAddr: my host addresses are :
[Thr 1]   1 : [192.2.1.15] VERSAP01 (HOSTNAME)
[Thr 1]   2 : [127.0.0.1] LOOPBACK (LOCALHOST)
[Thr 1]   3 : [192.2.1.183] 192.2.1.183 (NILIST)
[Thr 1]   4 : [194.221.94.253] SAPROUTER (NILIST)
[Thr 1]   5 : [192.2.1.185] 192.2.1.185 (NILIST)
[Thr 1]   6 : [192.2.1.186] 192.2.1.186 (NILIST)
[Thr 1]   7 : [192.2.1.187] 192.2.1.187 (NILIST)
[Thr 1] MsHttpInit: full qualified hostname = VERSAP01.KVN.DE
[Thr 1] HTTP logging is switch off
[Thr 1] MsHttpOwnDomain: own domain[1] = KVN.DE
[Thr 1] ms/icf_info_server : deleted
[Thr 1] *** I listen to port sapmsS01 (3650) ***
[Thr 1] *** I listen to internal port 3950 (3950) ***
[Thr 1] CUSTOMER KEY: >E1363402629<
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
The profile default.pfl looks good to me:
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
SAPDBHOST = VERSAP01
j2ee/dbtype = db4
j2ee/dbname = S01
j2ee/dbhost = VERSAP01
SAPSYSTEMNAME = S01
SAPGLOBALHOST = VERSAP01
j2ee/scs/host = VERSAP01
j2ee/scs/system = 51
j2ee/ms/port = 3951
rdisp/bufrefmode = sendoff,exeoff
DIR_PUT = /usr/sap/S01/put
rdisp/mshost = VERSAP01
rdisp/msserv = sapmsS01
rdisp/msserv_internal = 3950
>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>
Any idea ?
Is anything wrong with our configuration(which we did not change manually) ?
Do we have to patch the kernel ?
Best regards,
Juergen Scheckelhoff

Hello Mr.Hermsen,
some profile parameters were set wrong by the installation routines.
SAP send me some reference profiles from a running solution manager installation and I synchronized our profiles accordingly.
I cannot remember exactly which parameters were wrong, but i guess it was one of the port numbers.
Good luck and best regards,
Jürgen Scheckelhoff
Here are the profiles sent to me from SAP:
........1........2........3........4........5........6........7.......
***********Beginning of data*************
#.*       Default profile DEFAULT.PFL
#.*       Version                 = 000002
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:33:12
SAPSYSTEMNAME = SSM
SAPGLOBALHOST = as0015
SAPDBHOST = as0015
j2ee/dbtype = db4
j2ee/dbname = SSM
j2ee/dbname = SSM
j2ee/dbhost = as0015
DIR_PUT = /usr/sap/SSM/put
1. SAP Central Service Instance for J2EE
j2ee/scs/host = as0015
j2ee/scs/system = 11
j2ee/ms/port = 3911
rdisp/bufrefmode = sendoff,exeoff
1. SAP Messaging Service for ABAP
........1........2........3........4........5........6........7.......
rdisp/mshost = as0015
rdisp/msserv = sapmsSSM
rdisp/msserv_internal = 3910
1. Login Client
login/system_client = 001
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Instance profile SSM_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:34:08
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 3
1. Number of work processes
rdisp/wp_no_dia = 4
rdisp/wp_no_btc = 2
rdisp/wp_no_enq = 1
rdisp/wp_no_vb = 1
rdisp/wp_no_vb2 = 1
rdisp/wp_no_spo = 1
1. ABAP parameters
ztta/roll_extension = 2000000000
#CL: reduced initial memory size to save resources. Increase if necessary
#em/initial_size_MB = 4096
em/initial_size_MB = 2048
abap/buffersize = 600000
zcsa/table_buffer_area = 64000000
rsdb/cua/buffersize = 16383
rtbb/buffer_length = 16383
rtbb/max_tables = 500
#RV: Sollte beim Einspielen von grossen Hopa Queues aktiviert werden
#rdisp/max_wprun_time = 0
1. Language
zcsa/system_language = E
zcsa/installed_languages = DE
1. ICM parameters
icm/server_port_0 = PROT=HTTP,PORT=80$$
1. Java parameters
jstartup/trimming_properties = off
jstartup/protocol = on
jstartup/vm/home = /QIBM/ProdData/Java400/jdk14
jstartup/max_caches = 500
jstartup/release = 700
jstartup/instance_properties = $(jstartup/j2ee_properties):$(jstartup/sdm_prope
j2ee/dbdriver = /usr/sap/SSM/SYS/jdbc/tbx/jt400.jar
rdisp/j2ee_start_control = 1
rdisp/j2ee_start = 1
rdisp/j2ee_libpath = $(DIR_EXECUTABLE)
exe/j2ee = $(DIR_EXECUTABLE)/jcontrol$(FT_EXE)
rdisp/j2ee_timeout = 600
rdisp/frfc_fallback = on
icm/HTTP/j2ee_0 = PREFIX=/,HOST=localhost,CONN=0-500,PORT=5$$00
ms/server_port_0 = PROT=HTTP,PORT=81$$
j2ee/instance_id = ID1053262
#CL: Keep properties file, if some vm params need to be set differently than def
java/as4/keep_props = 1
1. Solman Konfiguration lt. IMG
login/create_sso2_ticket = 2
login/accept_sso2_ticket = 1
icm/host_name_full = as0015.wdf.sap.corp
icm/host_name_full = as0015.wdf.sap.corp
icm/server_port_1 = 25000
login/no_automatic_user_sapstar = 0
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
........1........2........3........4........5........6........7........
***********Beginning of data*************
#.*       Instance profile SSM_SCS11_AS0015
#.*       Version                 = 000001
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:35:40
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
1. Trace level
rdisp/TRACE = 1
1. SAP Messaging Service for Java
rdisp/msserv = 0
rdisp/msserv_internal = 3911
ms/standalone = 1
ms/server_port_0 = PROT=HTTP,PORT=81$$
1. SAP Locking Service
enque/serverinst = 11
enque/table_size = 4096
rdisp/enqname = $(rdisp/myname)
enque/snapshot_pck_ids = 100
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_DVEBMGS10_AS0015
#.*       Version                 = 000006
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:37:38
SAPSYSTEMNAME = SSM
SAPSYSTEM = 10
INSTANCE_NAME = DVEBMGS10
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_DVEBMGS10_as0015
1. Trace level
rdisp/TRACE = 3
service/trace = 3
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Execute_01 = local CLRLIB LIB(R3WRK10)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
Execute_03 = local $(DIR_EXECUTABLE)/saposcol
Execute_04 = local $(DIR_EXECUTABLE)/DLTOLDPKGS SSM
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start application server
DW = $(DIREXECUTABLE)/disp+work$(FT_EXE)
Start_Program_01 = local $(_DW) pf=$(_PF)
1. Start syslog collector daemon
CO = $(DIREXECUTABLE)/rslgcoll
Start_Program_02 = local $(_CO) pf=$(_PF) -F
1. Start syslog send daemon
SE = $(DIREXECUTABLE)/rslgsend
Start_Program_03 = local $(_SE) pf=$(_PF) -F
1. Start internet graphics server
IG = $(DIREXECUTABLE)/igswd_mt
Start_Program_04 = local $(_IG) -mode=profile pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 10 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK10)
***********End of Data*******************
XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
***********Beginning of data*************
#.*       Start profile START_SCS11_AS0015
#.*       Version                 = 000003
#.*       Generated by user = CLANGER
#.*       Generated on = 22.06.2007 , 14:39:04
SAPSYSTEMNAME = SSM
SAPSYSTEM = 11
INSTANCE_NAME = SCS11
DIR_CT_RUN = $(DIR_EXE_ROOT)/run
DIR_EXECUTABLE = /usr/sap/SSM/SYS/exe/run
DIR_INSTALL = /usr/sap/SSM/SYS
DIR_PROFILE = $(DIR_INSTALL)/profile
PF = $(DIRPROFILE)/SSM_SCS11_as0015
1. Initialize the execution environment
Execute_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Execute_01 = local CLRLIB LIB(R3WRK11)
Execute_02 = local $(DIR_EXECUTABLE)/sapmscsa pf=$(_PF) -n
1. Start SAP messaging service
MS = $(DIREXECUTABLE)/msg_server$(FT_EXE)
Start_Program_00 = local $(_MS) pf=$(_PF)
1. Start SAP locking service
EN = $(DIREXECUTABLE)/enserver$(FT_EXE)
Start_Program_01 = local $(_EN) pf=$(_PF)
1. Cleanup after shutdown
Stop_Program_00 = local $(DIR_EXECUTABLE)/cleanipc 11 remove
Stop_Program_01 = local CLRLIB LIB(R3WRK11)
***********End of Data*******************

HTTP Server - change port 7777 to 80

Hi all!
I have installed, in Linux_x86 (Enterprise Linux), a database 10.2.0.1, the HTTP Server from companion CD and the Apex 2.2.1.
I want to change the default port of HTTP Server 7777 to the port 80.
For that I change the httpd.conf:
port:80
listen:80
then I follow the manual of administration of HTTP Server and I done:
as root - chown root .apachectl
chmod 7560 .apachectl
I change again to user oracle and I tried to restart the HTTP Server but i can't.
error:
RCV: Permission denied
Communication error with the OPMN server local port.
Check the OPMN log files
Now, I only can start the HTTP Server with the user root.
Is that normal? I missed something?
And now I can access the page of the http server but i can´t reach the Apex - when I write http://hostname/pls/apex - the browser change it to http://hostname/pls/apex/apex and gives the following error:
Service Temporarily Unavailable
The server is temporarily unable to service your request due to maintenance downtime or capacity problems. Please try again later.
Oracle-Application-Server-10g/10.1.2.0.0 Oracle-HTTP-Server Server at oracle.com.pt Port 80
Thank you in advance,
CD
Message was edited by:
user524118

Hi,
I have a similar problem.
Could you please write down how you solve your problem.
regards,
Mzz

Installing Apex 4 on Oracle 11.2.0.3 with Oracle HTTP Server on WINDOWS

Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
TIA!

Vorlon1 wrote:
Has someone put together a cookbook on installing the above? I have tried following the documentation; but it is in dire need of updating. I have become quite confused as to how to piece together alll of the parts. Seemed much easier in 10.2...
TIA!After a database re-install on my Windows 7 laptop 2 months ago I tried to install the HTTP server but had trouble getting it to work. After a day or two I gave up and used the EPG which works with some performance issues - pages can take many seconds to render. I think there is a conflict between the EPG and security software on the laptop but have not been able to pin down the exact problem. Anyway, the EPG is not an option for you and even Oracle does not reccommend it for production implementations. The EPG is okay for quick-and-dirty R & D but real implentation should have something better. I prefer the EPG on my laptop because the Apex listener required an extra window to be open that I was likely to close by mistake (my error yes. Reality is sometimes stupid).
I have had several sucessful installs on older versions of Apex on Oracle 9 and 10 on Windows XP using the HTTP server but always struggle with the configuration; getting the settings in the .conf file (whatever it is called now) correct remains difficult (at least for me). I keep installation notes on problems encountered and their solutions. Typical issues I encounter are
1. Incorrect configuration file settings
2. Improper loading of images
3. Missing installation steps (unlocking ANONYMOUS, for instance, or not updating the PL/SQL version).
4. Make sure the correct URL is being used
5. When using the HTTP Server making sure it is running by using its URL is very heplful
Follow the installation instructions for your platform and listener. If something does not work first review the installtion instructions very carefully, then perform web searches for answers to the problem. Except for last time when I lost patience with the HTTP server the installations have always worked.
I also find Windows 7 painful - the added security prevents me from editing needed files without jumping through hoops. I don't even want to think about Windows 8 ...

OEM discovers HTTP server but with wrong port

Similar Messages

Maybe you are looking for