OEM GC 10g Installation using Solaris 10g (Not SPARC but Intell Based Serve

Hi !
Server: Dell Poweredge 2900 (Intell Chip).
OS: Solaris 10 x86-64
I could not find from OTN Oracle Download site the Full/Complete Software (OMS, OMR, OMA) as is available for SPARK, Windows, Linux, HP-UNIX Operating Systems. Where can I get it? I do not want An Agent on my Server and the rest of the software on some other computer. i want it all (Full/Complete) to be installed on my DELL Server. Is there a work around if the sofofware not available. What about OEM GC software for SPARK? Will it work on Solaris 10 X86-64 also?
Please reply.
Thanks.
user8981475

Hm
all that depends on your original installation.
Usually, on Unixes, Oracle puts some "configuration" files under /var/opt/oracle
Assuming on your original server the Oracle install (=ORACLE_HOME) is under
/oracle/ora10g
then you need to copy everything !! into the same directory of your secondary server (and of course this can be a zone)
In a standard oracle environment the database instance related files are under
$ORACLE_HOME/dbs
here you find the spfile, the pfile, the passwd file which you need to start your instance
At least you should have the same user and group id for the owner and group on the secondary server (best would be the same
patches installed), and you should do a relink of the Oracle software ($ORACLE_HOME/bin/relink all)
as the Oracle user owning the software.
Furthermore the /etc/system files on both server shall contain the same entries for the database, mainly settings about shared memory and
semaphores.
Frank

Similar Messages

  • In system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, i cloud user and groups network and more

    in system settings 15 item are not accessible, get the message: cannot open it, is not possible on intel based MAC. Items like security, iCloud user and groups network and more.
    Genius bar told me to erase the harddisk and install OSX Maverick again. This has not changed the problems with the system settings

    You need to Repartition the drive as One partition which will erase all data from it and then reinstall OS X. then with the initial setup system you chose the language on the first screen that comes up. That sets the language for the whole system.
    There is no other way of completely removing certain information created by a previous owner. this hold strue whether you are selling or give a Mac to someone.
    To do the repartitioning you need to use the Online Internet Recovery system, if the Mac came with Lion 10.7 or above, or from the original system reinstall discs that came with it when it was new.

  • Virtual PC not compitable for intel-based Mac?

    I saw that on the Mactopia website. I just bought a new Macbook with 1GB Ram and 80 GB Harddrive. I think that it is intel based and I am planning to purchase a copy of Virtual PC 7 but then i went to Mactopia and read: "Note: Virtual PC does not run on Intel-based Macs." on this page of Mactopia
    http://www.microsoft.com/mac/products/virtualpc/virtualpc.aspx?pid=virtualpc
    is this true? if it is then of course i won't go through the hassel of buying and returning. Please give me an answer, Thanks!

    Bootcamp is a program here on the Apple site that they made to allow you to install windows on your intel mac. It adds a windows partition to your drive and helps you burn a windows driver CD that has to be installed after windows is installed. To install windows xp you must have a windows XP disk with SP2 on it. It does not take long and does not hurt your apple install. Just do a search on this site and it will take you to the page you need.
    TTFN
    Steve

  • Not Able To Connect Internet Using Ethernet Getting Not Able To Connect PPP Server

    I was able to connect to internet using ethernet,but suddenly it is not working when i try to connect it says not able to connect ppp server but i am able to connect same ppoe to windows machine

    Hello vivek.palamkar,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    Solutions for connecting to the Internet, setting up a small network, and troubleshooting
    http://support.apple.com/kb/ht1714
    Mac OS X: Connecting to the Internet With PPPoE
    Mac OS X: Troubleshooting a PPPoE Internet Connection
    Best of luck,
    Mario

  • How Does One Perform Initial Installation of T5 S/W on an Intel-based Apple MacBook Pro?

    Hello People,
    My old Palm Tungsten T5 died suddenly. I managed to secure an open box T5 from Amazon, and I tried to install on my new Apple MacBook Pro. The Palm software did not complete the install apparently due to the lack of a PowerPC processor. Now my new T5 cannot even read my 2GB SD card.
    Is there a work-around for installations using Intel processors on Apple computers?
    I am running OS X Lion---not Snow Leopard. I just bought this MacBook Pro less than two months ago, and it's the most modern version.
    I saw something of the issues others were having with Snow Leopard, and I wondered whether the same issues carried over to Lion.
    If necessary, I can dig my old Windows Vista PC out of storage, but I really like using the Apple laptop and would prefer to use that since I normally use the laptop and PDA on the go.
    Most respectfully yours,
    John
    Post relates to: Tungsten T5

    Here is the info. on MAC OS X. You will need to look for 3rd party options.
    Palm Desktop and HotSync Manager are not compatible with Mac OS X 10.6 Snow Leopard. Palm currently has no plans to release future versions of Palm Desktop and HotSync Manager for Palm OS. Customers do have options with third-party solutions such as The Missing Sync for Palm OS from Mark/Space.
    Here is the link to Mark/Space for your T5.
    http://www.markspace.com/products/palm/palm-sync-software.html?source=picker_palmos_mac
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/common/article/47831_en.html#tungstent5
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Using a PPC backup for an intel based iMac

    I used my external hard drive with my PowerBook TM backup to migrate my data to my new intel based iMac. Afterwards I formated the external hard drive to the GUID scheme and initialed a TM backup. But somehow in the midway TM stopped backing up and produced this error message:
    +Starting standard backup+
    +Backing up to: /Volumes/Backup/Backups.backupdb+
    +Event store UUIDs don't match for volume: Macintosh HD+
    +Event store UUIDs don't match for volume: Medien+
    +No pre-backup thinning needed: 71.14 GB requested (including padding), 285.93 GB available+
    Is it not possible to use a PPC based TM backup to restore it on an intel based machine?

    Well, that's not what the error means. There's a problem with the UUIDs of the volumes involved. However, that said, no you cannot put a PPC version of OS X on an Intel Mac. However, you can restore your data from any TM backup. But if you did a full system restore from your PPC system backup to the new machine, then you have a problem for which the only solution is to erase the internal drive and reinstall OS X using the original discs that came with the new computer.
    I'm not really sure what you are trying to do, but if you actually formatted the external drive and re-partitioned it using GUID and are now trying to initiate a TM backup of your new Intel Mac, then I recommend you simply reformat the external backup drive Mac OS Extended, Journaled (and check to be sure the drive is partitioned as GUID,) and then reconfigure TM preferences and start a new backup.

  • Importing .p7b certificates using certutil does not work, but work with IE. I need to automatize certificate installation. Help!

    Hello,
    I have to add a trusted certificate authority to XP machines to allow use of mail via OWA.
    There is a domain, but there are too remote machines which are not in the domain (and it's on them I'm experiencing the problem).
    Domain sysdmin sent me the .P7B certificate, which I can load withour problem using import with IE. The certificate is stiored in the Trusted Root Certificate Authorities and it's all ok.
    But I need to automatize the certificate import due to the hifg number of these clients as well as the linbe spped (very slow graphic), so I found the certutil utility.
    I've tried with several commands (like "certutil -f -v -addstore root filename.p7b"  or "certutil -enterprise -f -addstore NTAuth filename.p7b" and several variants), but the utility always said that the certificate is correctly imported, but when checking
    with the MMC console I can't find it (and, by the way, trying to load again results in also being notified that the certificate is already loaded!), so all the stuf does not work.
    What should I do to be able to import the .P7B in Trusted Root Certificate using command line (.bat file, of course)?
    Many thanks in advance for any help!
    Max

    Hi,
    As i can understand you want to import a .p7b file which is a chain of certificates. And certutil is not working.
    I too had the same issue. After searching and thinking the alternatives for hours, got a solution which worked for me. Here is it.
    Get certmgr.exe tool available with MS .net framework tools.
    Try adding this to your batch file
    certmgr -add -all -c "File.p7b" -s -r localMachine Root
    where File.p7b is the file containing certificates. You can replace the name with your file name.
    Check if its working.
    Thanks,
    Reyaz

  • Remote Installation of Solaris 10 on Sparc machine..

    Hello all..
    I have a Sun V240 box that has Solaris 8 currently installed on it. I need to wipe out the whole box and do a Fresh install of Solaris 10.
    Problem is, that box is in the server room, and is not connected to any monitor, nor do it have any graphic card.I have only SSH access to the box from my Windows Desktop to do regular Admin operations.
    How do i install Solaris 10( i got Solaris 10 on a DVD disk) on that box, that has no monitor and no graphic card. ?
    Also, i do have a Sun V100 Desktop machine at my desk, that i use sometimes to connect to this Solaris Server.
    any help is appreciated.
    thanks
    Ram

    You could use 'live upgrade' to upgrade the system while it's still running, but you'd need extra disk space for that.
    Or you could attach via the serial console and communicate with it that way to run the install.
    Darren

  • Help! Can I sync my Palm Desktop with Outlook Web Access?? I'm using a T5 -- NOT wireless, but cable-synced

    I have spent the last 3+ weeks trying to get my Palm Desktop information to sync with an Outlook Web Access account.
    I have been able to sync my Palm Desktop info with Outlook 2007, and I have been able to acess an Outlook Web Access account through a microsoft exchange server.
    BUT, when I talk with tech support.... I get several conflicting answers.  One tech says it should be easily possible; one says I need to buy another monthly service; one says it is impossible and I should just buy a Blackberry.
    At this point.... I'm not sure I actually care what the answer is, but I would just like a definitive answer....
    I have a Palm Tungsten T5.
    I want to sync that Contact and Calendar information regularly with an Outlook Web Access account so that my colleagues can see and edit my schedule as needed.... then the info would sync BACK to my Palm so that I can have my current schedule with me.
    Can anyone shed some light on this please??
    Thank you!
    Emily Koenig
    Post relates to: Tungsten T5

    The short answer is no.
    The t-5 has the ability to connect to an exchange server but the version of versamail it has would only sync mail and calendar. You would have to have a wifi card to be able to do even that. To do what you would want you would need to upgrade the versamail client (I don't believe Palm has an upgrade for the T-5) and a wifi card.  
    Post relates to: None

  • SIMS 2 not working on Intel-based Mac Mini

    SIMS 2 will not work on new Mac Mini. I contacted Aspyr who said that the integrated graphics card prevents it from displaying graphics and that this was a hardware problem.
    Is there any way to make SIMS 2 work on the Mac mini
    -update or add on graphics card
    -use in PC mode
    - or ?
    Mac mini   Mac OS X (10.4.5)  

    Hi Hillview,
    If you bought 'The Sims 2' for Mac then it will only run on either a PowerPC Mac or an Intel Mac running OS X, not under Windows with BootCamp unfortunately. This means that you can't attempt to run it in "PC" mode. The Apple Store states that the minimum 'Graphics' requirements to run The Sims 2 are either an ATI 9200 and higher, or a GeForce FX5200 and higher. Unfortunately they don't quite take into account that they are shipping macs with Intels integrated graphics chipset now, and no Intel specific requirements are mentioned in the system requirements. It does however state that a minimum of 32MB Graphics Power is required to run the game, and the GMA950 that is in your mac mini has upto 64MB shared, meaning that technically it should run fine.
    It must simply be a problem in the way that the Intel graphics chip processes visuals that are specific to the game its self and unfortunately you can't upgrade the Graphics chip inside your mac mini - it's soldered in! A call to the Apple Care Help Line may be your best bet, because the chances of you being able to get it running, aren't really looking all too good unfortunately =(
    Hope that I may have been of help
    -Pos

  • Custom installation using XE

    Basic installation of SOA Suite does not seems to work, I don't why.
    I have tried Custom installation using XE Database which works but Apcahe
    Web Server is throwing exceptions in installation phase (when installation process tries to launch unmanaged Apache module when configurating it) so it terminates too. So boring!
    Is it possible to use XE's Http server as SOA Suite's Http Server?
    How to configure that?

    AFAIK, there is NO compilation of Apache on the win32 platform. If you use Vista please verify that it is certified to install SOA Suite there. Another common pitfall is not reading the installation guide and using computers with DHCP....
    --olaf                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

  • Client-Sever Version of OEM in 10g?

    Is there a Client-Server version of OEM in 10g other than the web based OEM?

    Folks,
    I just found a problem with the java version (client/server) of EM which is on the client cd of 10g R2.
    The problem is that the memory parameters/distribution display (under the configuration section) is not working. The html version of EM properly displays the memory parameters for SGA.
    I guess this is something the Oracle needs to fix in the next major patchset, or make another java EM for client/server available for download from OTN .
    I personally like the java version for many reasons, not to be scrolling to much or has to click on Next page is one of them :)
    hope this proves useful.

  • Solaris 8 on Intel STL2 server board - installation problem

    Hi,
    I try to install Solaris 8 (4/01) on Intel STL2 server board (P III 866 MHz, SDRAM 512 ECC Reg, Adaptec AIC7899 Dual Channel-one Ultra160/LVD channel, Intel PRO/100+ Fast Ethernet Controller, ATI Rage* IIC SVGA) - without success.
    It recognizes all devices but after I choose Solaris Interactive installation (from CD labeled Solaris 8 Software 1 of 2 Intel Platform Edition) it displays:
    Booting kernel/unix...
    SunOS Release 5.8 Version...
    then reboots after 2 seconds.
    Since Intel STL2 board appears in the HCL for Solaris 8 I have struggled a while with the problem. I have not found neither post nor driver update information concerning this issue on the Solaris' related Web sites.
    Finally, I found the very strange specification update info of STL2 board, published by Intel:
    "13. Sun* Solaris* 8 installation issues
    PROBLEM: Sun Solaris 8 cannot be installed on the STL2 server board with any BIOS version later than BIOS Release 1.1, Build 15. The system reboots during install and therefore the installation cannot be completed.
    IMPLICATION: Installation of Sun Solaris 8 cannot be completed on an STL2 server board running any BIOS release later than BIOS Release 1.1, Build 15.
    WORKAROUND: Sun Solaris* 8 will successfully install on the STL2 server board with BIOS Release 1.1, Build 15."
    My BIOS release on the STL2 board is 1.7. It's too new to install Solaris 8 !?!
    I am unable to get an old STL2 model with BIOS 1.1. Is there a way to update anything in the Solaris 8 in order to set it up on the new model of Intel STL2 server platform?
    I would appreciate any help. Thanks.
    Matt

    The problem has been resolved.
    I got the older BIOS 1.1 Build 15 for Intel STL2 from Intel Internet Support. After I installed BIOS 1.1 instead of BIOS 1.7 had no problem with installation of Solaris 8.
    Matt

  • IOS 6 AirPrint not working with 10.6 Server - FIX!!!

    Not sure if there are any bods out there that use 10.6.8 server for AirPrint but if you do - you will have noticed that iOS6 doesn't see shared printers where as iOS5 does. Below is the fix. You need to be reasonably proficient with Terminal but otherwise - straightforward. Hope this helps.....
    (Obviously you can stop the service and use Netputing's AiorPrint Activator but for a server based managed queueing system, this just allows it to works as it did before.)
    10.6.8v1.1 Server and iOS6 AirPrint not working… Fix below…
    Stop Print Services and as root from terminal using vi or equiv add the following:
    (you will need to chmod 744 to edit then 444 the mime file after. 'touch' the files when your done)
    It may work being left rwx but I don't know - I have just put the files back to their original state.
    Restart print services after and you are all good.
    usr/share/cups/mime/
    File: apple.types
    Add the following line in bold (I have shown a few lines either side so you know where to put them):
    image/pict                              pict pic PICT string(522, <001102FF0C00>)
    image/urf                               urf (0,UNIRAST)
    # Image formats supported by CGImageIO.
    image/imageio                   crw cr2 nef bay raw dcr dng orf srf fax
    File: mime.convs
    Add the following line in bold:
    text/css                              application/postscript                    33          texttops
    text/html                              application/postscript                    33          texttops
    image/urf                               application/vnd.cups-postscript 66           pdftops
    image/gif                              application/vnd.cups-postscript          66          imagetops
    image/png                              application/vnd.cups-postscript          66          imagetops
    image/jpeg                              application/vnd.cups-postscript          66          imagetops

    Arrr - your Printer is AirPrint capable. You are printing direct from an iOS device to the printer. Some printers need a firmware update - others will work with iOS 6 straight away.
    The issue above relates to Mac OS X Server 10.6.8 (not client) and in relation to Print Services. You can use 10.6 Server and AirPrint to Any printer you like - not just an AirPrint ones. This is what AirPrint Activator does for client -  the above fix mends for Server.
    Glad you got you problem solved anyway.
    Oli

  • OEM grid 10g installation steps on RHEL 5.4

    Please provide the steps and note ids for OEM grid 10g/11g installation on linux 5
    we are on 2 node RAC running on Red Hat Enterprise Linux Server release 5.4 (Tikanga)
    uname -a
    Linux clelx062ptlge.penske.com 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    Please provide what are the packages and kernal parameters we have to install/set at OS level.
    Any white papers will be very helpful.
    --Srikanth                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                               

    dm_ptldba wrote:
    Please provide the steps and note ids for OEM grid 10g/11g installation on linux 5
    we are on 2 node RAC running on Red Hat Enterprise Linux Server release 5.4 (Tikanga)
    uname -a
    Linux clelx062ptlge.penske.com 2.6.18-164.el5 #1 SMP Tue Aug 18 15:51:48 EDT 2009 x86_64 x86_64 x86_64 GNU/Linux
    Please provide what are the packages and kernal parameters we have to install/set at OS level.
    Any white papers will be very helpful.
    --SrikanthHere are the steps of installing Grid Control on Linux
    http://www.oracle-base.com/articles/10g/Oracle10gR2GridControlInstallationOnRedHatAndCentOS.php
    http://www.oracle-base.com/articles/11g/GridControl11gR1InstallationOnOEL5.php
    I'm also currently working on video tutorial of installing Grid Control and Deploying agents. So I hope it will be ready for the next week, so just keep visiting video tutorial page of my blog and you'll find it there soon :)
    http://kamranagayev.wordpress.com/oracle-video-tutorials/

Maybe you are looking for