OEM Grid Control 10g Install

Hi,
I am new to OEM. I want to install OEM Grid Control in new linux maxhine. For this can i install any thing before go to OEM. Please help me out on this. Please expalin the install procedure.
Thanks in Advance,
Sridhar

Hey there :)
Can you elaborate on what you mean by "install an thing before", do you want to install other Oracle products, then OEM and point it to manage these installs?
As for the install procedure, a quick look at how its done is seen on the link below
http://www.oracle.com/technology/obe/obe10gem/install/gridinst/gridinst.htm
The Oracle By Example series can be quite a good base to start from when you are new to this area.
enjoy,
Grummy

Similar Messages

OEM Grid control 10g on Linux

Hello,
I have installed OEM grid control 10g and able to connect to the console via the sysman user id.
I am trying to configure email notification, but though I put all credentials properly I am not able to receive any emails.
I was looking at Oracle documentation and it says....
The SMTP server is the name of the mail server (for examplemail.acme.com).
For Linux, the SMTP server must be the local host name.Use the fully qualified host name (including domain
Does the smtp server need to on the localhost ? can't it work with a smtp server on a different host than the grid control box ?
Any advice will be much appreciated.
S.

The smtp service doesn't need to be on the host you installed grid control, Grid control can use any smtp server as long as it can reach it.
Regards
Gokhan

OEM Grid Control 10g Deployment

Hi,
We are planning to deploy OEM Grid Control 10g (with Diagnostics and Performance Management packs) for management and monitoring of following targets:
Oracle Databases (9.2.x, 10.x) - 12
Oracle Application Servers 10g - 6
OEM documentation states that for smaller deployments (targets < 100); following h/w specs would be sufficient:
CPU: 1 (3GHz)
Memory: 4 GB (2GB for OMS, 2GB for OMR)
Disk Storage: 12 GB (2GB for OMS, 10GB for OMR)
I want to know:
i) Will that amount of disk storage will be sufficient?
ii) What would be the growth rate of OMR (Oracle Management Repository)?
iii) What other factors should be considered?
All suggestions are welcome.
Regards,
Preet

Hi Preet,
We had a 200+ (now 700+) target install in a major Telco and at that time
the repository database size was just 25 GB. So 10 GB for the database
itself should be ok. However sounds like you are crunched for space.
Bear in mind you need space for the installation of the EM10g OMS home,
the Agent Home and the Database home. So I dont think 12 GB is enough
for you. Try it out in test.
Regards,
Porus.

OMS Configuration Failed In the Process of Installing OEM Grid Control 10g

Hi every one,
i am getting the same problem in the installation Configuration Assistants, OMS Configuration Failed
I have already installed the Oracle software, created the databse and when i started installation, i selected the 2nd option to use the existing database.
here is i am getting the error:
details says that are as follows
oui-25031 oracle.sysman.emcp.agent.agentplugin,
so i followed the steps and drop the sysman user with cacade option
again i got the same error,
Environment:
Microsoft Windows XP Professional SP3,
Oracle 10G 10.2.0.1.0 (Already Installed)
Dell Inspiron 530
Intel(R)Core(TM)2 Quad CPU [email protected], 3.0GB RAM
have enough hard disk.
Now installing Oralce Enterprise Manager Grid Control 10g release2 (10.2)
i have seen the error messages in this forum many are on unix environment.
any views on windows operating system?
Thank You.

hi,
before you install grid, try and patch the database to a later release, 10.2.0.4
had this issue in work and patching the db resolved the issue.
I did install database software only, then patch then create database, then install grid
regards
Alan

Does OEM Grid Control 10g support monitoring Oracle Portal 10g?

Dear expert,
It seems OEM GC 10g could monitor WebCenter, Weblogic portal and even Websphere portal, but I could not find any info for Oracle Portal. So,
1. Does OEM GC support to monitor Oracle Portal 10g? If not, does it support Oracle Portal 11g?
2. If does not support Oracle Portal, then is there any workaround for it? E.g. if it’s feasible through “web appliation”?
Any comment and docs are welcome.
Thank you in advance.

Hi Rob,
Thanks for your help.
BTW, I have another question for your reply, that what do u mean by “You can use Oracle Enterprise Manager to monitor and manage OracleAS Portal”?
Do you mean OEM AS Console or OEM GC? Boz I only find these metrics from OEM AS Console, which mentioned in this doc. http://download.oracle.com/docs/cd/B16240_01/doc/em.102/b25987/oracle_portal.htm#CHDFJHDD
If these metrics only available in AS Console, then how to let the OEM send out email notification if critical threshold is over?
Thank you.
Tony

Deploying Apache_fop war file -- no OEM Grid Control

Hi
Does anyone know how I would go about deploying the Apache_fop war file on a machine where OEMgridControl is not installed, eg An XE Database upgraded to Apex 3.0.1 or any other database without Grid contol.
The instructions for deployment all assume OEM Grid control is installed.

I copied an existing working structure and this worked for me.

Install of OEM Grid Control on 10g RAC

Hi,
I try to install OEM Grid Control 10.1.0.3 on a 10G 10.1.0.2 database with ASM and RAC installed, on windows.
At the step of choosing the product to install, i would like to choose 'OEM GC using an existing database' or 'Additional management service 10.1.0.3', but it fails.
The reason is 'you cannot install OEM on a hardware cluster'.
I have no idea how to resolve that, do i have to change my RAC installation ?
thank you for your answer,
Isabelle

To install on RAC, you install using an existing database and then specify the sid/hostname for ONE instance in the RAC.
Once the management repository has been sucessfully installed and the mid-tier is up, you can edit emoms.properties to modify the JDBC url the application uses to connect to the database to be RAC aware.
The are a number of pre-installation requisites for an existing database to be used as a destination for a repository installation, there are both documents on metalink on the subject and the basic installation guide references pre-requisites for existing databases.

Installing OEM Grid Control not complete?

Hi,
I've installed OEM Grid Control on Solaris 5.10
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
from link
but no OMS ha been installed.
I had no choice during the installation process to mark it as well as other components like: Agent, Repository.
Is it not enough to use Disk1/.../runInstaller ???
Can anybody advice me how to install it completely (without patches, they blur the process to me, at present)
?

Yes, that should be enough. After that you have to choose one of the 2 choices and click next
1) Enterprise manager 10g grid control using new database
2) Enterprise manager 10g grid control using existing database.
Thanks,
Tarun

How to install Grid Control 10g Release 3?

Hello,
I need install Grid Control 10g Release 3 for Linux x86_64 on SUSE 9, and I need some tips about this instalation.
I need registry 3 database, 1 DB is 10g and the others are in 9.2.
Can I help me?
Thank's

If you installed the 64-bit SLES-9, you are on the only platform that has a full install of 10gR3 Grid Control available:
http://www.oracle.com/technology/software/products/oem/index.html
Everyone else must install 10gR2 fully, then patch up to 10gR3.
Run runInstaller to start installation
- When asked for "install type" option, choose "Enterprise Manager using New Database" option
- Complete installation as per install guide
- Install the 10gR3 agent install on any additional servers that require monitoring.
Load and execute orarun to enable the correct kernel options if you not done so already. It can be downloaded from www.suse.com/oracle. Comment out any IPv6 entries from /etc/hosts. The O/S should be setup similar to the AS 10.1.2 install doc for SLES9:
http://ftp.novell.com/partners/oracle/docs/iAS10gR2_sles9_install.pdf

How to install OEM Grid Control R2 on RHEL AS4 (AMD64/EM64T)

Hi all,
I was able to install the Oracle Application Server (Infrastructure and BI and Forms) successfully on the another machine with the same specs. The application I installed on the 64-bit machine is a 32-bit Oracle Application Server.
Now, I tried to install the OEM Grid Control R2 (another 32-bit Oracle Software) on an identical 64-bit machine but had no luck. Ran linux32 bash before trying the install.
I always get the error "error in invoking target 'dm_on ioracle' of makefile 'OH/db10g/rdbms/lib/ins_rdbms.mk".
Please help me/guide me in this install if it is at all possible.
Thanks and regards,
Mike

Did you read the installation docs?
Did you look up trying to do this on metalink before proceeding?

Error while installing OEM Grid Control

I am getting error while installing OEM Grid control (with existing database) at OMS Configuration. So, I cancelled the installation and deleted all databases and started the instal again. I am still getting an error at OMS configuration.
I am trying to read through the threads here to see if anyone has solved it. I see a lot of threads on this topic but not sure how you guys resolved it.
Can anyone help here.
In the oracle installer, I see the message : The c:\oraclehomes\agent10g\cfgtoollogs\configToolfailedCommands" script contains all commans that failed, were skipped or cancelled ....
--in this file, all I see is:
rem Copyright (C)1999, 2006 Oracle
oracle.sysman.emcp.agent.AgentPlugIn
How should I proceed
Thanks
Ramya
Edited by: Ramya Reddy on Mar 9, 2009 5:25 PM

go to AOh\bin and run agentca -f and check agent status

Installing OEM grid control on Linux 64 bit

Was someone able to install OEM grid control 10.2.0.1 on a RedHat linux 4.0 x86-64. I Know that it is not certified yet but most of the time it is possible to install a 32 bit application on a 64 bit OS.
Thanks

Yes, I have it installed. (let me tell you though, it wasn't easy!). A few notes:
1. Download and install compat-oracle-rhel4-1.0-5.i386.rpm from http://oss.oracle.com/projects/compat-oracle/files/RedHat/
(this essentially puts a wrapper around gcc and transforms it into a shell script)
2. Modify /usr/bin/gcc to look like this (add –m32):
exec /usr/bin/gcc32 -m32 -static-libgcc -B/usr/lib/gcc-lib/i386-redhat-linux/2.96/ "$@"
3. Execute “linux32 bash”
4. Run the installer.
Hope that helps.
P.S.: The installer might fail to detect the rpms below. Just make sure you have them installed.
compat-libstdc++-296-2.96-132.7.2
libstdc++devel-3.4.3-22.1
openmotif-21-2.1.30-11
Message was edited by:
D4Gov

Installing Grid Control 10g Release 1 - Memory Check Fails

Hi to all,
I'm trying to install the Grid Control 10g on a Red Hat Enterprise Linux AS release 4 . I have configured the Computer OK , but when I try to install the Grid Control, the OUI says that the system only has 1 MB of RAM. The computer has 2 GB and only 150 MB is being used, what is the problem? what can I do?
Thanx for all.
P.D.: Sorry for my English.

Hi!
Those are my kernel parameters:
kernel.sem = 256 32000 100 142
kernel.shmmni = 4096
kernel.shmall = 2097152
kernel.shmmax = 2147483648
fs.file-max = 206067
net.ipv4.ip_local_port_range = 32768 65000
net.core.rmem_default = 262144
net.core.rmem_max = 262144
net.core.wmem_default = 262144
net.core.wmem_max = 262144
And those are the Kernel Parameters Requirements:
Red Hat Enterprise Linux 4.0
semmsl = 250
semmsl2 = 250
semmns = 32000
semopm = 100
semmni = 128
shmmax = 536870912
shmmni = 4096
shmall = 2097152
filemax = 65536
ip_local_port_range = 1024 65000
rmem_default = 262144
rmem_max = 262144
wmem_default = 262144
wmem_max = 262144
As you can see all the parameters are set correctly.

Steps to install Oracle grid control 10g on windows

dears ,
kindly I need to install oracle grid control 10g release 5 on windows
so please if any one have a detailed step-by-step document for that post it to me ASAP
Regards.

Hi;
Please check below link
Oracle® Enterprise Manager Grid Control Installation and Configuration Guide 10g Release 5 (10.2.0.5.0)
http://download.oracle.com/docs/cd/B16240_01/doc/install.102/e10953/installing_em.htm
http://kamranagayev.wordpress.com/2011/01/31/video-tutorial-installing-oracle-10 gr2-grid-control-and-deploying-agent/
Regard
Helios

Install grid control 10g Server 2003

Hello all;
I have installed Oracle Grid control 10G on my PC ( server 2003 ) , the installation continued until I found it is paused on OMS Configuration and gave me the following message :
Configuration assistant "OMS Configuration" failed
The "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" script contains all commands that failed, were skipped or were cancelled. This file may be used to run these configuration assistants outside of OUI. Note that you may have to update this script with passwords (if any) before executing the same.-----------------------------------------------------------------------------
I looked at "C:\grid_conrol_home\agent10g\cfgtoollogs\configToolFailedCommands" file and I found :
oracle.sysman.emcp.agent.AgentPlugIn
the file OMS_HOST/sysman/logs/emoms.log
2011-04-04 09:30:20,250 [Thread-18] WARN jdbc.ConnectionCache _getConnection.353 - Got a fatal exeption when getting a connection; Error code = 17002; Cleaning up cache and retrying
2011-04-04 09:30:20,250 [Thread-18] ERROR em.notification unregisterOMS.1417 - Error unregistering: Exception d'E/S: SO Exception was generated
java.sql.SQLException: Exception d'E/S: SO Exception was generated
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:137)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:174)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:286)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:327)
     at oracle.jdbc.driver.PhysicalConnection.<init>(PhysicalConnection.java:433)
     at oracle.jdbc.driver.T4CConnection.<init>(T4CConnection.java:150)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:31)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:571)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:217)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPhysicalConnection(OracleConnectionPoolDataSource.java:108)
     at oracle.jdbc.pool.OracleConnectionPoolDataSource.getPooledConnection(OracleConnectionPoolDataSource.java:76)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.makeCacheConnection(OracleImplicitConnectionCache.java:1331)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getCacheConnection(OracleImplicitConnectionCache.java:422)
     at oracle.jdbc.pool.OracleImplicitConnectionCache.getConnection(OracleImplicitConnectionCache.java:330)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:285)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:178)
     at oracle.jdbc.pool.OracleDataSource.getConnection(OracleDataSource.java:158)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:359)
     at oracle.sysman.util.jdbc.ConnectionCache._getConnection(ConnectionCache.java:322)
     at oracle.sysman.util.jdbc.ConnectionCache.getUnwrappedConnection(ConnectionCache.java:575)
     at oracle.sysman.emSDK.svc.conn.FGAConnectionCache.getFGAConnection(FGAConnectionCache.java:207)
     at oracle.sysman.emSDK.svc.conn.ConnectionService.getSystemConnection(ConnectionService.java:1303)
     at oracle.sysman.emdrep.notification.NotificationMgr.unregisterOMS(NotificationMgr.java:1408)
     at oracle.sysman.emdrep.notification.NotificationMgr.destroy(NotificationMgr.java:1867)
     at oracle.sysman.emSDK.svc.ServiceUtil.cleanupServices(ServiceUtil.java:212)
     at oracle.sysman.eml.app.ContextInitializer.contextDestroyed(ContextInitializer.java:851)
     at com.evermind.server.http.HttpApplication.destroy(HttpApplication.java:5980)
     at com.evermind.server.http.HttpSite.destroy(HttpSite.java:936)
     at com.evermind.server.http.HttpServer.destroy(HttpServer.java:632)
     at com.evermind.server.ApplicationServer.destroy(ApplicationServer.java:2102)
     at com.evermind.server.ApplicationServerShutdownHandler.run(ApplicationServerShutdownHandler.java:39)
     at java.lang.Thread.run(Thread.java:534)
the file installAction.log
Start Processing configuration tool Enterprise manager Website Configuration Assistant ....
Preparing for copying C:\OracleHomes\oms10g\sysman\log\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\sysman\log\*
Adding the file C:\OracleHomes\oms10g\sysman\log\emctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emdctl.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.log from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\emoms.trc from the file path expanding...
Adding the file C:\OracleHomes\oms10g\sysman\log\pafLogs from the file path expanding...
Completed copying file C:\OracleHomes\oms10g\sysman\log\emctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.log to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emdctl.trc to C:\OracleHomes\oms10g\cfgtoollogs\emdctl.trc
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.log to C:\OracleHomes\oms10g\cfgtoollogs\emoms.log
Completed copying file C:\OracleHomes\oms10g\sysman\log\emoms.trc to C:\OracleHomes\oms10g\cfgtoollogs\emoms.trc
Number of file(s) copied is 5
Number of directories copied is 0
End Processing configuration tool Enterprise manager Website Configuration Assistant
Start Processing configuration tool DCM Repository Backup Assistant ....
Preparing for copying C:\OracleHomes\oms10g\dcm\logs\* to C:\OracleHomes\oms10g\cfgtoollogs
Expanding source path C:\OracleHomes\oms10g\dcm\logs\*
Adding the file C:\OracleHomes\oms10g\dcm\logs\daemon_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\dcmctl_logs from the file path expanding...
Adding the file C:\OracleHomes\oms10g\dcm\logs\emd_logs from the file path expanding...
Number of file(s) copied is 0
Number of directories copied is 0
End Processing configuration tool DCM Repository Backup Assistant
INFO: Le script "C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands" contient toutes les commandes qui ont échoué, ou qui ont été ignorées ou annulées. Ce fichier peut servir à exécuter ces assistants de configuration en dehors d'OUI. Vous pouvez être amené à mettre à jour ce script avec les mots de passe (éventuels) avant de l'exécuter.
INFO: Created a new file C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\oms10g\cfgtoollogs\configToolFailedCommands.bak
INFO: Created a new file C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands
INFO: Since the option is to overwrite the existing C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands file, backing it up
INFO: The backed up file name is C:\OracleHomes\agent10g\cfgtoollogs\configToolFailedCommands.bak
GRAVE: OUI-25031 : Echec de certains assistants de configuration. Il est vivement recommandé de les relancer immédiatement. Une exécution incorrecte d'un assistant marqué comme Recommandé signifie que le système est mal configuré.
1. Dans le panneau Détails de l'écran de l'assistant de configuration, consultez les erreurs à l'origine des échecs détectés.
2. Corrigez ces erreurs.
3. Sélectionnez les assistants ayant échoué et cliquez sur le bouton Réessayer pour les relancer.
INFO: Sélection utilisateur : Oui/OK
file hosts
127.0.0.1 localhost.localdomain localhost
192.168.2.195 srvmid1.com.tn srvmid1
please you ca help me...

Check if the last post in http://cn.forums.oracle.com/forums/thread.jspa?threadID=477659&tstart=0&start=15 can be the solution for you. Remember, the error is in the last step of the configuration process. So it only concerns the agent. The OMS and OMR were (as I see it) correctly configured.
Eric

OEM Grid Control 10g Install

Similar Messages

Maybe you are looking for