OEM Grid Control V10.0.4.x... Can it manage the 10gR2 Environment
Hi,
Trying to decide whether to install and configure Grid Control using the latest 10GR1 version or what until OEM GC 10GR2.... any recommendations, suggestions....
thanks,
catharine
Hi,
my agent's version:
Agent Version : 10.1.0.3.0
OMS Version : 10.1.0.3.0
Protocol Version : 10.1.0.3.0
I'm monitoring one 10gR2-Database (SuSe Linux, SLES9) although unsupported by ORACLE - it works fine.
Best regards
Andreas
Similar Messages
-
Adding Database in OEM Grid Control 11g
Dear All,
I have install silently oem agent 11g in a solaris system. The installation was successful and agent is up and running.
But the thing is I can't add this client and its database in my OEM Grid Control interface. When I try to add the target it shows the bellow error
Information
You cannot add a host target from Enterprise Manager Grid Control.
To add a host target, install the Oracle Management Agent on the host computer you want to manage. When the Management Agent begins communicating with the Oracle Management Service, the Management Agent target and the Host target will appear in the list of targets.
My Question is how i can the target's agent can communicate with OMS agent? and How this target can be incorporated?You install management agents on the host and point the URl to the grid control OMS and it will automatically discover the host and databases
It is in the documentation.
Oracle Database FAQs -
Installing OEM Grid Control not complete?
Hi,
I've installed OEM Grid Control on Solaris 5.10
Enterprise Manager 10g Grid Control Release 2 (v10.2.x)
Full Installers (Agent, Repository, OMS, and Management Packs)
from link
but no OMS ha been installed.
I had no choice during the installation process to mark it as well as other components like: Agent, Repository.
Is it not enough to use Disk1/.../runInstaller ???
Can anybody advice me how to install it completely (without patches, they blur the process to me, at present)
?Yes, that should be enough. After that you have to choose one of the 2 choices and click next
1) Enterprise manager 10g grid control using new database
2) Enterprise manager 10g grid control using existing database.
Thanks,
Tarun -
Error while installing OEM Grid Control
I am getting error while installing OEM Grid control (with existing database) at OMS Configuration. So, I cancelled the installation and deleted all databases and started the instal again. I am still getting an error at OMS configuration.
I am trying to read through the threads here to see if anyone has solved it. I see a lot of threads on this topic but not sure how you guys resolved it.
Can anyone help here.
In the oracle installer, I see the message : The c:\oraclehomes\agent10g\cfgtoollogs\configToolfailedCommands" script contains all commans that failed, were skipped or cancelled ....
--in this file, all I see is:
rem Copyright (C)1999, 2006 Oracle
oracle.sysman.emcp.agent.AgentPlugIn
How should I proceed
Thanks
Ramya
Edited by: Ramya Reddy on Mar 9, 2009 5:25 PMgo to AOh\bin and run agentca -f and check agent status
-
hi
i am trying to install the OEM grid control on my machine configured with statis IP address
After installation when configuration assistants start to configure. i face the following error continuously.
java security configuration assistan fails with the following errors
jaznca.log at "E:\oracle\product\10.1.0\em\cfgtoollogs" contains the following
Oracle JAAS [Fri Mar 10 18:01:55 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: oracle.ias.sysmgmt.exception.TaskException: TaskMaster initialization failed.
Root Cause: Subscription request timed out after 120000 millseconds. Possible causes: OPMN may not be running, you may have an OPMN running in an alternate ORACLE_HOME using duplicate port values, or OPMN may be misconfigured.
Resolution: check the system configuration and make sure that the client can access the repository database.
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.TaskMaster.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.sysInit(Unknown Source)
at oracle.ias.sysmgmt.task.InstanceManager.init(Unknown Source)
at oracle.ias.sysmgmt.EntryPoint.init(Unknown Source)
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
I started the OPMN manually and clicked on RETRY to configure this assistant. again failed and now
jaznca.log contains the following
Oracle JAAS [Fri Mar 10 18:06:50 GMT+05:00 2006]: exception: null
java.lang.reflect.InvocationTargetException
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:324)
at oracle.security.jazn.util.JAZNInstallHelper.resync(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.setCredentials(Unknown Source)
at oracle.security.jazn.util.JAZNInstallHelper.main(Unknown Source)
Caused by: java.lang.Exception: At instance:EnterpriseManager0.lhrpc419.lhr.systemsltd.com Error:See base exception for details.
Base Exception:
oracle.ias.sysmgmt.exception.TaskException:OPMN process startup has timed out.
Resolution: Try starting the OPMN process using the command line utility "$ORACLE_HOME/OPMN/bin/OPMNctl start". If the OPMN process does not start check the log files in $ORACLE_HOME/OPMN/logs for more information.See base exception for details.
at oracle.security.jazn.smi.DcmUtil.resyncInstance(Unknown Source)
... 7 more
ons.log at "E:\oracle\product\10.1.0\em\opmn\logs" contains following
06/03/10 18:05:32 [4] ONS server initiated
06/03/10 18:05:47 [4] Logging disabled
06/03/10 18:05:49 [4] ONS server initiated
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [2] 0.0.24.56:6200 - listener BIND failed
06/03/10 18:05:49 [4] Listener thread 860: 192.168.0.70:6200 (0x401) terminating
06/03/10 18:05:49 [2] BIND (No error)
06/03/10 18:05:49 [1] Local listener terminated
can you guide that how to catter with this?
regardsAre you doing the Grid Control installation into a new Oracle Home? I would try a fresh installation...Typically, the installation itself is fairly straightforward..
-
OEM GRID CONTROL REMOTE INSTALLATION
Hello Good People,
I am trying to install OEM GRID CONTROL. I have a two RAC node (AIX 5L). I don't have acces to the server so my only option is remote installation.
I was able to ftp the file into a directory on the server but it will not unzip, (error: couldn't find 10g.zp or 10g.ZIP). I uploaded the file as binary.
Okay, I will like to install from my laptop, (xp) using the DVD that I have. I went through the documentation steps below:
1. Make sure that the remote access software is installed and running on the remote and local computers.
2. On the local computer, share the DVD drive.
3. On the remote computer, map a drive letter to the shared DVD drive. You would use the remote access software to do this on the remote computer.
Through the remote access software, run Oracle Universal Installer on the remote computer. You access Oracle Universal Installer from the shared DVD drive.
I am confuse with step 2 downward. How can I map a drive in UNIX or why should I? I am connected to the sever by Telnet.
Any direction or suggestion will be appreciated. Please note that all I want is to remotely install GRID CONTROL on my server from the DVD that I have.
Thanks for your help.......Based on further researched I discovered that the problem is due to the fact that I don't have an X-Window client install on my local machine. I just install a free trial version (30days). OUI finally started and went through the various checks. Although, the check passed I couldn't continue. It is saying missing some files. I will post the erros messages from the log in a while.
Thanks -
Install of OEM Grid Control on 10g RAC
Hi,
I try to install OEM Grid Control 10.1.0.3 on a 10G 10.1.0.2 database with ASM and RAC installed, on windows.
At the step of choosing the product to install, i would like to choose 'OEM GC using an existing database' or 'Additional management service 10.1.0.3', but it fails.
The reason is 'you cannot install OEM on a hardware cluster'.
I have no idea how to resolve that, do i have to change my RAC installation ?
thank you for your answer,
IsabelleTo install on RAC, you install using an existing database and then specify the sid/hostname for ONE instance in the RAC.
Once the management repository has been sucessfully installed and the mid-tier is up, you can edit emoms.properties to modify the JDBC url the application uses to connect to the database to be RAC aware.
The are a number of pre-installation requisites for an existing database to be used as a destination for a repository installation, there are both documents on metalink on the subject and the basic installation guide references pre-requisites for existing databases. -
How To Install/Configure OEM Grid Control On Windows
Hi,
I've downloaded OEM Grid Control for windows (32-bit) from oracle site.
This .zip files has 3 more .zip files eg
File Size
3822442.zip 510 MB (535,208,588 bytes)
3731596.zip 275 KB (282,502 bytes)
3731593.zip 510 MB (535,047,905 bytes)
Can you pls tell me which one is actual OEM Grid Control software, and what are the other .zip files ?
Pls email me at [email protected]
Your help greatly appretiated.
Regards,You will be needing all three zip files. It will contain all files needed for installation of a repository Database Instance, the Management Server and an Management Agent.
cheers
Rob -
Do we have any certification for OEM -grid control ?
Do we have any certification for OEM -grid control ?
There is currently no OEM grid control certification and currently no plans to build one. You can stay up-to-date on new and upcoming Oracle releases on our website at http://education.oracle.com/pls/web_prod-plq-dad/db_pages.getpage?page_id=224.
Regards,
Brandye Barrington
Certification Forum Moderator
Certification Program Manager -
HOW TO RELINK OEM GRID CONTROL 10.1.0.2 ON AIX 5L
We are in process for patching our OS from 5.3-01+APARs to 5.3-02 and usually we relink all our oracle products after OS patching.
I have notes for DB and AS but not for OEM GRID CONTROL.
Any help are appreciated.
Diego.I thnk you can run /u001/app/oracle/product/10.1.0.3_oms/bin/relink for relinking your binaries.
Regards,
http://askyogesh.com -
Add WebLogic Domain to OEM Grid Control
On a host, say x, i have installed OEM grid Agent Version: 11.1.0.1.0. The host is listed on OEM grid control. On this host i have a weblogic domain version 10.3.3. Now i am trying to add this weblogic domain to OEM 11g grid control which is on a different host.
It gives the following error
Error: Failed to connect to agent x:3872
Failed to connect to agent x:3872. Reason: java.net.UnknownHostException: x.
Only an agent 11.1 or later can be used for finding targets.
How can i solve this?bummer.. any response? I'm getting the same error now, and the documentation isn't all that clear gasp
-
RAC environment setup for OEM Grid Control
Hi All,
One of my customer is setting up RAC environment for OEM Grid Control, he has following questions.
1) Can I use the DirectNFS client on each RAC node to mount SAN storage created with an OCFS2 filesystem?
2) Can I use the DirectNSF client to mount the shared filesystem loader directory?
3) Should I be using DirectNFS for the shared filesystem loader at all? Or should I just use a normal Linux NFS mount?
4) Is OCFS2 preferred over NFS for the shared filesystem loader?
Any information is highly appriciated.
Thank you,
BhavinPlease check the below doc
http://www.oracle.com/technology/deploy/availability/pdf/MAA_WP_10gR2_EnterpriseManagerBestPractices.pdf -
Oracle Grid Control 10.2.0.3 can´t configure databases
I installed the Grid Agent (10.2.0.5) in host1 for monitoring the database (10.2.0.5) inside him. I did the same in host2, that has Agent (11.1.0.1) and Database (11.2.0.2). Both Agents are pointing to the same Grid Control Management Server.
Grid control has a separated server with Grid Control OMS and Agent installed (10.2.0.3).
This host1 was added to the grid control target hosts, and the database too. The secure option is disabled.
First Problem: metrics collection error in Grid Control for database target.
My Solution: Deconfigured the Oracle DBControl in host1 and host2 (it was configured with a local repository) dropping the repository, and I used | emca -config agent | to create a link to the agent in local machine.
New state: Now the OEM show the targets apparently been monitored. When a target fall down the OEM send allerts normally.
Second Problem: When I click in a host, database, listener, or any of the targets, intending the log in the instance it take about 5 minutes and returns: "No Response from Application Web Server There was no response from the application web server for the page you requested. Please notify the site's webmaster and try your request again later. "
My solution: I didn´t find one. HELP!
For coincidence, all databases actually monitored (8) are 10.2.0.4 or down. All of these can be managed by click in target names by OEM. Could it be the version of the new databases?
See $OMS_HOME/SYSMAN/LOG/emoms.log in Management Server
2012-05-09 10:35:13,462 [EMUI_10_22_37_/console/monitoring/hostOverview$ctxType=Hosts$type=host$target=HOST1.MYDOMAIN] ERROR host.HostOverviewDataObject getLogonInfo.2343 - IOException in sending Request :: Connection timed out
oracle.sysman.emSDK.emd.comm.CommException: IOException in sending Request :: Connection timed out
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest_(EMDClient.java:1728)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1624)
at oracle.sysman.emSDK.emd.comm.EMDClient.getResponseForRequest(EMDClient.java:1547)
at oracle.sysman.emSDK.emd.comm.EMDClient.getMetrics(EMDClient.java:915)
at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getLogonInfo(HostOverviewDataObject.java:2285)
at oracle.sysman.eml.mntr.host.HostOverviewDataObject.getHostInfo(HostOverviewDataObject.java:2226)...Hello.
We already have Grid Control 10.2.0.4 and just installed AD4J 10.2.0.4. This version of AD4J is not integrated with Grid Control, and can be setup on any server by unzipping the downloaded file (no installer). I did find the installation/configuration documentation lacking, but worked through it with a little help from Oracle Support.
The AD4J console has the look and feel of Grid Control, but is totally separate app with its own Apache server, etc.
Daren -
Which? - License for OEM Grid Control or just the additional Packs and Add-Ins?
I took a look at the price list and I wanted to clarify the "Named User Plus". The Diagnostic and Tuning Packs are each shown as $100 for the named user. As a DBA, if I have a named user license for these two management packs, does this mean that I can manage as many databases as needed with these two management packs?
Wow, 25 separate dbcontrols sound like a nightmare.
By the way, our Oracle rep just happened to come here yesterday, and he validated what was said here.
You can install the Grid Control free; you simply un-check the Packs/Add-Ins during the install.
As I understand it, you would install the Grid Control Agent first on each server, then when you install Oracle RDBMS, the Universal Installer will detect the Agent and enable the Grid Control instead of the Database Control.
Then you install the OEM Grid Control repository and software on a separate server, and that is where you manage all of the Oracle RDBMS servers from.
He also said to use the highest version Grid Control Agents on the database servers and repository server and keep the versions of that software in sync, which is separate from the Oracle RDBMS version. -
Pre-Requisites for OEM/Grid Control?
Just to be absolutely clear - The latest version of OEM/Grid Control requires what version of Oracle DB?
We are begin conservative and rolling out 11g r1 in production and want to know if that is sufficient to host the lastet version of OEM/Grid Control.
If not, will it support an earlier version of OEM/Grid Control? What version?
Is there a support matrix that clearly identifies the version dependencies?user4431165 wrote:
Just to be absolutely clear Just to be absolutely clear, the documentation is at http://download.oracle.com/docs/cd/E11857_01/install.111/e15838/install_em_exist_db.htm#CIAIEAAC
And Support Note "Oracle Enterprise Manager Grid Control Certification Checker (Doc ID 412431.1)" is referenced. It states that you can use as old as Oracle Database 10g Release 2 10.2.0.4. Older than that, and you leave supported territory anyway.
Maybe you are looking for
-
When a vendor has 2 bank accounts how the system recognize which account will use. Edited by: H&C0148 on Aug 13, 2011 1:53 AM
-
I updated to yosemite os and was in the middle of a project with final cut pro 10. Now it says final cut pro is incompatible. How can I access my project and/or update final cut?
-
Poor print quality on varying lines
We are having problems with the print. It only shows the lower half of some lines intermittently. Most print is fine on the page, only a few lines are affected. We tried cleaning the printhead, test pages, cleaning manually, blowing out dust, etc.
-
Migrating 6.0- 6i: cdr-21247 "no action given"
I'm trying to migrate application systems from a 6.0 repository to a 6i repository and everything seems to work according to the installation guide chapter 2 'server side installation, migration and upgrade'. However, when I start the actual migratio
-
Re: encrypting in c#, decrypting in java
Hello, I am trying to use RSA so I can encrypt in c# (encrypt a password) and decrypt it in my web service to check the password. But, I am having some problems when I try to read in the file with my private key. I am currently getting an error of: t