OEM-Node found but not the database

I have OEM installed on the local machine (NT) that is connected to 2 remote database servers (solaris). Each database server has a database sit on it (8.1.6). Although OEM was able to find both remote servers, only one database was registered with OEM. Could someone provide me with some solutions about how to have both databases registered with OEM?
Thanks.
Morris

Hi,
check if the Agent is started on the remote machine that You don't see in the console.
Try to start the remot agent after the DB startup and the refresh the node via the console.
If not, register the DB manually.
Bye Max
null

Similar Messages

  • Timeout: Tuxedo kills the service but not the database connection

    Hi all,
    I am experiencing some performance problems on my system due an efficient SQL and a Tuxedo improper timeout handling.
    A service is using a "problematic" SQL (we will tune it but it's not the main problem). After 60 seconds from the execution, Tuxido kills the services for a timeout.
    At this point I would like Tuxedo to notify DB2 database as well in order to stop processing the SQL. Instead the SQL continues running on the database (also if the service is killed) and this produce a gradual slow down of the performances.
    In the UBBCONFIG, we are using a service configuration like the following timeout configuration:
    .RESOURCES
    SCANUINIT 5
    SANITYSCAN 6
    BLOCKTIME 12
    .SERVICES
    DEFAULT: SVCTIMEOUT=45
    service1 SVCTIMEOUT=60 TRANTIME=60
    service2 SVCTIMEOUT=60 TRANTIME=60
    Note: not all the services are listed in the .SERVICES section and we are using the default NOTIFY as well as an OPENINFO.
    Can you please help me in finding a configuration to kill both the services and the database?
    Thanks in advance,
    Benedetto

    Hi Benedetto.
    First of all, Tuxedo doesn't kill services, it kills servers. Your UBBCONFIG file specifies three timeouts, BLOCKTIME, SVCTIMEOUT, and TRANTIME.
    BLOCKTIME specifies how long a Tuxedo API that needs a response will wait for that response. If the response isn't received in that period of time, Tuxedo will return TPETIME to the caller. As with any failure, if the request was part of a transaction, the transaction is marked rollback only. Note, this timeout does not affect the request, whether sitting in a server's IPC queue or currently executing in a server.
    SVCTIMEOUT is a much more severe timeout and determines how long Tuxedo will allow a service implementation to execute. If a service implementation doesn't reply within the SVCTIMEOUT period, Tuxedo will issue an OS level KILL request to kill the process. If the server is marked restartable, Tuxedo will then try to restart the server assuming none of the restart limits have been reached. Killing the server causes the request to be lost within the server so the caller will stay blocked until BLOCKTIME is reached at which point the above actions will take place.
    TRANTIME is the amount of time Tuxedo allows a transaction to remain active and viable. When this period expires, Tuxedo will mark the transaction as timed out with the only option being rollback. As well, Tuxedo aborts any API requests that would normally cause messaging to occur, i.e., making a tpcall() within a timed out transaction will fail without any attempt to call the service.
    So in your case, the issue is partially that you have the values of your timeouts in somewhat reverse order. Typically we see BLOCKTIME being the smallest value, with TRANTIME typically larger than BLOCKTIME, and SVCTIMEOUT larger even still, although there are good reasons for exceptions to this guideline. Part of the reasoning behind this is that killing a server is a significant thing and its usually best to try and let the server complete whatever its doing, if if the work has been timed out either due to BLOCKTIME or TRANTIME, since the cost of killing and restarting a server is significant.
    Tuxedo will notify the database of the transaction status when the application finally issues a tpcommit() or a tpabort() request, but not until then. Although, if SVCTIMEOUT is hit, then killing the server should cause the database connection to be lot.
    If you could describe the behavior you are seeing and the relevant portions of your ULOG we can try to make some sense of what is happening.
    Regards,
    Todd Little
    Oracle Tuxedo Chief Architect

  • I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    I change my Pc and don't found my Original DVD from my Acrobat 9 STANDARD. I have the Key and found in Internet the Pro Version, but not the Standard Version. Where can i download the Standard Version?

    Downloadable installation files available:
    Suites and Programs:  CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
    Acrobat:  XI, X | 9,8 | 9 standard
    Premiere Elements:  13 |12 | 11, 10 | 9, 8, 7
    Photoshop Elements:  13 |12 | 11, 10 | 9,8,7
    Lightroom:  5.7.1| 5 | 4 | 3
    Captivate:  8 | 7 | 6 | 5
    Contribute:  CS5 | CS4, CS3
    Download and installation help for Adobe links
    Download and installation help for Prodesigntools links are listed on most linked pages.  They are critical; especially steps 1, 2 and 3.  If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.window using the Lightroom 3 link to see those 'Important Instructions'.

  • ACL found but not expected in Utilities

    Hi all.
    I bought an iMac 3.06 GHz , loaded it with 4 gigs of RAM and it cam epre-installed with Leoapard, so fat so good, but upon opening thecomputer, I immediately started the migration of data from an older iMac, running Panther. FOr some odd reason the migration , a proces Ihave done several times efficiently, was in this case a little messy, but my question to the power users is that every time I run permissions repair with Disk Utility, final report says as the following info: " ACL found but not expected in Utilities".
    I look for ACL , even as an invisible file, and I find nothing.
    I don't know if this is affecting the performance of the machine and wonder if anyone knows something about this issue. I would tend to think this may be related to the migration from an older machine, but still don't know how to solve it.
    Thanks
    Jorge

    ACLs are part of permissions system in leopard. It's not a hidden file so you wouldn't find anything in finder. you can see the ACLs on a particular file by entering
    ls -led path/to/file in terminal.
    For example. if you do it for the Utilities folder by entering
    ls -led /Applications/Utilities
    you should get
    drwxrwxr-x+ 30 root admin 1020 1 Aug 22:10 /Applications/Utilities
    0: group:everyone deny delete
    The second line is the ACL. It says that everyone is prevented from deleting the Utilities folder. It's present there by default to protect that folder from accidental deletion.
    the repair permissions error you are seeing is the result of an error in permissions checking database and should be ignored. Apple even has a KB article saying as much.
    http://support.apple.com/kb/TS1448?viewlocale=en_US

  • I can only backup the datafiles but not the control files and SPFiles

    Hello, all,
    I am using the Oracle 10g on a linux server which runs redhat 9. I want to backup the whole database to the disk, but not the flash recovery area. It is /rawdata. I will show how I configure the backup part in EM. Is there anything wrong?
    1. the ARCHIVELOG is on
    2. under Administration, in the All Initialization Parameters, I remove the string value of “log_archive_dest_1”. After that, I go to the SPFile and remove the string value of “log_archive_dest_1”
    3. configure backup settings and policies. The Disk Backup Location field is set to /rawdata. Select Image Copy for Disk Backup type. Test Disk backup is successful.
    4. go to Policy page. Select “Automatically backup the control file and server parameter file (SPFile) with every backup and database structural change.) input /rawdata into the filed: Autobackup Disk Location
    Select “Optimize the whole database backup by skipping unchanged files such as read-only and offline datafiles that have been backed up”
    Select “Retain backups that are necessary for a recovery to any time whin the specified number of days (point-in-time recovery)
    Accept the default of 31days
    5. go to Schedul Backup
    6. select customized from the backup Strategy drop-down menu. Select the Whole Database
    7. in the Options page, select “Full backup” in the Backup Type section. Select “Online Backup” in the Backup Mode section. Select “back up all archived logs on disk” in the Advanced section.
    8. in the Setting page, select “Disk”
    9. in the Schedule page, accept the default job name and description. Select Immediately to execute the job immediately.
    10. just submit the job.
    After several minutes, the job is failed while the Prebackup and Postbackup are succeeded. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=268 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_68hvin50 tag=BACKUP_ORCL10G_000_101106111844 recid=108 stamp=603544772
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_69hvin6d tag=BACKUP_ORCL10G_000_101106111844 recid=109 stamp=603544813
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ahvin7g tag=BACKUP_ORCL10G_000_101106111844 recid=110 stamp=603544829
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6bhvin7v tag=BACKUP_ORCL10G_000_101106111844 recid=111 stamp=603544835
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:08
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6chvin87 tag=BACKUP_ORCL10G_000_101106111844 recid=112 stamp=603544841
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-05 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 11:20:54
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    It seems the system tries to find a file “arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270” in /rawdata. I just can not understand.
    What should I do? Any advice is highly appreciated!
    Qian

    the string value in the field of 'log_archive_dest_1" under "All Initialization parameters" is "LOCATION=+DATADG/orcl10g/". The same value was in the field under SPFile.
    I reset these values and tried to backup the whole database. The same error appeared. The log says:
    Recovery Manager: Release 10.1.0.2.0 - Production
    Copyright (c) 1995, 2004, Oracle. All rights reserved.
    RMAN>
    connected to target database: ORCL10G (DBID=770753237)
    using target database controlfile instead of recovery catalog
    RMAN>
    Starting backup at 11-OCT-06
    allocated channel: ORA_DISK_1
    channel ORA_DISK_1: sid=245 devtype=DISK
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00001 name=+DATADG/orcl10g/system01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSTEM_FNO-1_6ghvj9rd tag=BACKUP_ORCL10G_000_101106043753 recid=114 stamp=603563922
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:45
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00003 name=+DATADG/orcl10g/sysaux01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-SYSAUX_FNO-3_6hhvj9sq tag=BACKUP_ORCL10G_000_101106043753 recid=115 stamp=603563963
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:35
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00005 name=+DATADG/orcl10g/example01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-EXAMPLE_FNO-5_6ihvj9tu tag=BACKUP_ORCL10G_000_101106043753 recid=116 stamp=603563977
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:15
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00002 name=+DATADG/orcl10g/undotbs01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-UNDOTBS1_FNO-2_6jhvj9ud tag=BACKUP_ORCL10G_000_101106043753 recid=117 stamp=603563984
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:07
    channel ORA_DISK_1: starting datafile copy
    input datafile fno=00004 name=+DATADG/orcl10g/users01.dbf
    output filename=/rawdata/data_D-ORCL10G_I-770753237_TS-USERS_FNO-4_6khvj9uk tag=BACKUP_ORCL10G_000_101106043753 recid=118 stamp=603563990
    channel ORA_DISK_1: datafile copy complete, elapsed time: 00:00:03
    Finished backup at 11-OCT-06
    Starting Control File and SPFILE Autobackup at 11-OCT-06
    piece handle=/rawdata/c-770753237-20061011-07 comment=NONE
    Finished Control File and SPFILE Autobackup at 11-OCT-06
    RMAN>
    Starting backup at 11-OCT-06
    current log archived
    using channel ORA_DISK_1
    archived log /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_cqhvf270 not found or out of sync with catalog
    trying alternate file for archivelog thread 1, sequence 1062
    RMAN-00571: ===========================================================
    RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
    RMAN-00571: ===========================================================
    RMAN-03002: failure of backup command at 10/11/2006 16:40:05
    RMAN-06059: expected archived log not found, lost of archived log compromises recoverability
    ORA-19625: error identifying file /rawdata/arch_D-ORCL10G_id-770753237_S-1062_T-1_A-586368151_puhkv41f
    ORA-27037: unable to obtain file status
    Linux Error: 2: No such file or directory
    Additional information: 3
    RMAN>
    Recovery Manager complete.
    Why the system keeps trying to find files under /rawdata? It is the destination, not the source.
    Any help is appreciated!
    Qian
    Message was edited by:
    QianChen

  • "No connectivity with the server" error for one document but not the other, in the same document library

    We have a number of users all of a sudden getting "No connectivity with the server.  The file 'xxx' can't be opened because the server couldn't be contacted." errors trying to open MS Office docs (Word, Excel, etc.) in SharePoint with IE,
    just by clicking the link and selecting the "Read Only" option.  If they select the "Check Out and Edit" option, they can open the document no problem.  One of my customers gets the error on one document but not the other, in
    the same document library!  The older document (a weekly report) was copied and renamed as per standard procedure.  She can read the older document, but not the new one.
    It is definitely a profile issue, as other people have logged onto the machines of the users with problems and do not get the error.  We have also renamed people's c:\user profile folders and the corresponding Profilelist registry entry and the newly
    created profile does not experience the error for these people.  Renaming the profile back restores all their personal settings but the error reappears.  When we copied the old profile's folder structure into the new profile, many of the user settings
    were restored (but not all, like Dreamweaver settings) but the error did not appear.  We think that the system folders files (like AppData) weren't totally copied over so we're going to run another test using xcopy.  We are rebooting between
    logons to make sure all files are unlocked.
    The laptops and computers are mainly 32bit, Win7 Enterprise running IE9 and Office 2010 Professional Plus, but there's a few 64bit machines as well. The SharePoint farm has 1 WFE, 1 App Server running search and CA, and a shared database server running SQL
    2005 SP4.  SharePoint is 64bit MOSS 2007 with the latest CU.
    We've checked the logs on the client as well as on the server and there aren't any helpful entries.  We've also run Process Monitor, also with no helpful entries.  We're planning to run something like Fiddler next.
    It's not everyone, because there are many people are accessing the SharePoint system and the same files.  It is also not a permission thing, as we've tested by giving the users elevated permissions with no changes.  One person experiencing
    the errors is a Site Collection Admin.  That same person ran a test where I coped a simple Excel file into a Document Library which contained a problem file.  They were able to open it Read Only no problems that day, but the next day, the same
    file gave them an error.   In their case, they usually get a "xxx is not checked out" error and only occasionally get the "No connectivity with the server" error.
    We've tried lots of things including:
    Deleting IE cache
    Deleting SharePoint Drafts and webcache folder contents
    Running IE without add-ons
    Upgrading and Downgrading IE
    Uninstalling and re-installing IE
    Reinstalling our SSL certs
    Repairing Office
    Removing and then adding back in the Microsoft Office "Microsoft SharePoint Foundation Support" Office Tool 
    Deleting all HKLM and HKLU Office registry settings
    Toggling IE Compatibility Settings
    Toggling the IE Automatic Logon option
    Toggling the location of checked out files
    Adding the site in the trusted sites list
    Adding the site to the WebClient\Parameters registry locations
    Making sure the WebClient service is started
    Rebooting the machine (lol :)
    This is becoming a serious issue, not just because of the inconvenience for the users having to check out every document they want to read, but we have some files with macros that open up other documents to run which are now failing.  There aren't
    "check out" workarounds for some of those macros.
    We're planning to open a ticket with Microsoft, but I'm throwing it out here first in case someone has run into this before, or may have some suggestions on what to try next.  Thanks!
    -Richard.
    PS  I think this needs to be in the "General" forum instead?

    It took three days of dedicated troubleshooting, but I have found the cause of the errors, and a couple of fixes.  It helped tremendously that my own machine was throwing the error.  I have scheduled a couple of users to work with me to test the
    various fixes, to see which one works best, so the story isn't over yet.
    I had backed up my c:\users profile folder and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList registry key so I could restore my profile after I was done.  I made a copy of the profile folder and was using that for awhile,
    but then made another copy where I had deleted a lot of content out of it so that the copies would go faster.  Since a newly created profile did not have errors, I was trying to copy back as much of the profile as possible to make it easier for our users
    to get back to work.  Instead of blowing away their profile and starting from scratch (which we know worked) I wanted to narrow down what was causing the error and just skip that from the restore.  The concept was to keep as much as the users profile
    in tact (application settings, etc.) not just restoring their desktop and My Documents folders.
    When we first tested a few weeks ago, simply copying the folder contents didn't reproduce the error.  I then tried xcopy, but got the "can't read file" error.  Then I tried robocopy, and ran into the "junction" problem. 
    I went back to xcopy, and found that placing the excludes.txt file in the windows/system32 folder eliminated the error.
    So the process went as follows: 
    Reboot and log into the machine as another user
    Delete the profile and associated registry key
    Reboot and log into the machine as the affected user, creating a new profile, and there is no error
    Reboot and log in as the other user
    xcopy the contents of the skinned-down backed-up profile to the newly created profile
    Reboot and log in as the affected user, and the error occurs
    Repeat the above, but add items in the excludes.txt file to see what, when eliminated, causes the error not to appear in the last step
    I eventually found that skipping the c:\users\<profile folder>\appdata\local\Microsoft\office\14.0 folder allowed the entire profile to be copied over without the error occurring.  That was strange, because we've cleaned out the cache folders
    before which didn't fix the issue. 
    So I went about it the opposite way, and tried to delete the 14.0 folder from the restored profile, and after reboot, the error still occurred.
    What eventually worked was deleting the 14.0 folder and copying over a 14.0 folder from a newly created profile!
    One way to do this was to:
    Reboot and log in as another user
    Rename the c:\users profile folder
    Rename the appropriate [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList] registry key
    Reboot and log in as the affected user, confirm that there is no error
    Reboot and log in as the other user
    Copy the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder to the other user's desktop
    Delete new profile folder, and rename the backup to be the production folder
    Delete the C:\Users\<profile folder>\AppData\Local\microsoft\Office\14.0 folder and then paste the 14.0 copy from the desktop
    Reboot and log in as the affected user, confirm that there is no error
    We've tried this on a couple machines and it works.  I had to run Windows Explorer as Administrator to access the other profile's folders.
    We've also successfully copied a 14.0 folder created by one profile on one affected computer over another profile's folder on another computer, eliminating the error, so we're trying that first, as that is fewer steps.
    We may attempt to script this, but the self-help instructions are only 5 lines long:
    Reboot and log into the affected computer with another account
    Go to <link to location of 14.0 folder on network> and copy the 14.0 folder
    Run Windows Explorer as Administrator
    Go to c:\users\<profile folder>\appdata\local\microsoft\office and delete the 14.0 folder, and paste the copied 14.0 folder (trying to overwrite it makes Win7 want to merge the folders)
    Reboot and log into your normal account, and confirm the error is gone
    I'll come back and report after we go into the field with this fix, but after the few tests, I am cautiously optimistic that this is it.

  • How to create a custom control of a button where the look will be applied to all others but not the Boolean text?

    Hi all
    I would like to create a customized button as a master so that if I change the look of the master all other buttons will change too.
    I have done this with a custom control as a "strict type def" otherwise the look will not change BUT If I do this as a strict type def I cannot change the Boolean text anymore which should be different on every button.
    How can I create a master control of a button where the look will be applied to all others but not the Boolean text?
    Stay Hungry, Stay Foolish
    Solved!
    Go to Solution.

    Steve Chandler wrote:
    I don't think you can do that. I just looked and as I suspected the Boolean text property is read only for strict typedefs so you cannot use property nodes to change the text.
    As a workaround just make it a typedef. When you want to change the look open the typedef and make it strict, make your changes, then make it non strict again. You will have to update the Boolean text again for all instances. Kind of a pain. Maybe this is something for the idea exchange.
    Kudos for being sneaky.
    I like these creative work-arounds!
    Ben
    Ben Rayner
    I am currently active on.. MainStream Preppers
    Rayner's Ridge is under construction

  • Updateable Report/Pagination - rows found but not displayed

    Bear with me if there is a post that covers this, as the SEARCH facility seems to be hanging when I search on Pagination.
    I have a SQL Query (PL/SQL Function Body Returning SQL Query) which creates an Updatable Report.
    If I run the Query and the selection criteria results in more than one page in the "search results" and then I go to page 2 or page 3, etc and then peform another search that only results in 1 page of "search results", the actual search results will not display, but the pagination will show the number of rows that should be displaying.
    For example, I search on Coroner "John Black", which returns 55 rows. The first 50 are displayed. The next 5 are on page 2. If I then searchon Coroner "Jim Bean", 22 rows are returned (all on page 1). If I then search on "John Black" again, and this time, go to page 2 (to see the final 5 rows in the result set) and then search on "Jim Bean", I won't get any data in the report for Jim Bean, but a message showing that there are 22 rows of data. However, I cannot get that data to show (even if I select NEXT or PREVIOUS for the pages.
    Then if I go back and select on "John Black", get the same problem. I basically have to sign out completely in order to get this reset.
    Note that the problem occurs if you are on a page greater than that of the result set on the next query. For example, if I am on page 3 of 5 pages and perform another selection that has 3 pages, it is fine. But if the result set only has 2 pages, the form becomes confused.
    If the "Layout and Pagination" has a "Pagination Scheme" set to "Row Ranges X to Y of Z (no pagination)" I get an error like "Minimum row requested: 2401, rows found but not displayed: 46".
    If I use "Row ranges 1-15 16-30 (with set pagination)" I get "1-46" as a hyperlink, which if I click on, will show me the report.
    If I use "Row ranges 1-15 16-30 in select list (with pagination) I have a problem.
    If I use "Row Ranges X to Y (no pagination) I have problems.
    If I use "Row Ranges X to Y of Z (no pagination) I have problems.
    If I use "Row Ranges X to Y of Z (with pagination) I have problems.
    Basically, the one one that seems to work is those that have a hyperlink. Uing NEXT, PREVIOUS or a select list does not seem to work.
    Do you know what is causing this problem?

    I have the same issue, but cannot resolve it following above suggestions. I have a report page with search criteria and a "Go" button to submit the search. The branch back to the same page has "reset pagination for this page" checked, but still if run a query that returns just one row after having paged forwards, I get no rows displayed and a pagination link "1-1" that when clicked brings up the selected row.
    I tried adding a "Reset Pagination" process to run on submit (unconditionally), and it made no difference.
    I am using HTMLDB 2.0.

  • Write permissions issues / lots of "ACL found but not expected" errors / hardware failure? on brand new Mac Mini (still within warranty). OSX Mavericks 10.9.1.

    I was hoping that I could receive some feedback from you fine folks here
    My situation:
    I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
    I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
    I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
    This screenshot is someone elses, I tried to install audio software.
    Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
    I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
    I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
    Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
    The check ran for a long time, spitting out "ACL found but not expected" errors.
    I proceeded to restore write permissions. That took 20-25 minutes.
    Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
    The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
    I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
    I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
    When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
    Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
    Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
    There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
    ** Is my hard disk failing? In that case I'll return the Mac immediately.
    ** Or just a software issue?
    As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
    Thank you so much in advance - your help is highly appreciated. 
    Paul

    I was hoping that I could receive some feedback from you fine folks here
    My situation:
    I bought a 2012 Mac Mini 2.6 Ghz Intel Core i7 from the online Apple store. It came with Mavericks 10.9.1 pre-installed and was delivered two days ago (I know, the mini update is evident but I needed the machine).
    I noticed that I had to enter my password every time I created, moved or deleted a folder. I did not think much of it.
    I did, however, think much of not being able to install files from certain developers. I received the "The installer is damaged" notification as shown in this topic: https://discussions.apple.com/thread/5541793
    This screenshot is someone elses, I tried to install audio software.
    Based on that error, I contacted the developer of the software. But then I noticed that I got the same error for other developers too.
    I tried the solution that the topic starter marked as solving his issue in https://discussions.apple.com/thread/5541793. It involves booting in OSX Recovery (command+R) and excecuting the 'resetpassword' command. That did not work for me. It also looks like my password data isn't stored as I do not see the 'obfuscated' password dots that the screenshot shows in that topic, even when I entered and saved it multiple times -- but I'm not sure if that is part of the main issue (which I'm gettting to).
    I also made sure gatekeeper allows applications to be installed from unidentified developers, as shown here: http://www.instantteamspeak.com/static/en/img/mac-gatekeeper-anywhere.png That didn't help either.
    Next I opened up Disk Utility and ran a check on write permissions. That got me worried.
    The check ran for a long time, spitting out "ACL found but not expected" errors.
    I proceeded to restore write permissions. That took 20-25 minutes.
    Once it finished I checked write permissions again. An equal amount of permissions needed to be restored! It's as if Mavericks didn't remember anything it did.
    The good news is that I could now install the files I previously couldn't, but the fact that I've restored write permissions three times now, and each time it seems as if nothing of that is remembered, has gotten me worried.
    I've made a video with some explanation here http://youtu.be/a0hKQvy-Km8 - my sincerest apologies for the shaky camera.
    I then checked the hard disk and the partition above it. The Macintosh HD gave me the green 'ok' light, but something weird happened when I checked the partition on the level above it. It will take ages to finish and I see Disk Utility doing some strange 'jumping around': http://youtu.be/hyLAEhLRnKc (warning - long video so you might want to skip through it. The point is to demonstrate how long it takes).
    When I checked the hard disk for a second and third time, I got 'everything ok' results pretty quickly.
    Checking both the HD and the partition above it again, this is what happens (and what now worries me the most): http://youtu.be/4l2Fb2RvOW4
    Edit: I sum up my findings at the end of the video, might be better to skip here and then watch the full thing only if it's not clear yet.
    There is some further explanation in the video. It basically comes down to Disk Utility not finishing/not providing any conslusion, while Activity Monitor shows it's not doing anything -- please bare with me when watching the video, I know it's not the most exhiting video ever posted on YouTube but it does bring my point across (there is some more talk in this one; not sure if that's an improvement in terms of entertainment value though ).
    ** Is my hard disk failing? In that case I'll return the Mac immediately.
    ** Or just a software issue?
    As said, this Mac Mini is brand new. If at some stage anyone would feel the wise thing to do is to return my Mac, please do let me know. There is a 14 day return policy in The Netherlands (on top of other warranties) and I'd rather return it in case of doubt, than end up with technical issues with this machine once I've started working with it. I'm ok with doing some troubleshooting if the machine is fine, but I'd rather not take a gamble with a 1200 € machine under warranty.
    Thank you so much in advance - your help is highly appreciated. 
    Paul

  • Blog summary page echoes blog entry but not the pic...?

    My blog summary page echoes my blog entries' text but not the image file.  I either get the stock photo that comes in the template, or no image at all.  What's wrong?

    Never mind folks...Once I submitted this, I found an identical query in the "More LIke This" box at the side of this page that gave me my answer.  I have another question now that I'll pose in a new thread...

  • TA25361 I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addres

    I have a ton of documents and databases in AppleWorks v 6.0 that I can no longer open on my MacBook Pro.  Is there any way to recover this info?  Some documents can be opened and resaved with textedit, but not my database with all important addresses.

    I tried Peggy's List > Select All > Copy > Paste into an AW spreadsheet suggestion.
    In my case, pasting into the spreadsheet lost all text formatting (mostly text set to bold). The results of formulas were pasted, and checkboxes were pasted as "on" or "off". The DB did not contain any pop-up menus or radio buttons, but I expect they would transfer as a number showing the list position of the chosen item.
    Pasting the copied List view data into a Numbers table gave a result similar to that with AppleWorks. I selected B2 as the target cell (for top left cell of the pasted data) to avoid any effects of posting into a header row or column. Bold and regular text formatting looked the same as it had in AW's List view.
    Based on that, I'd slip the 'paste into an AppleWorks Spreadsheet step, and paste directly into a Numbers Table.
    Regards,
    Barry

  • Why am I finding this when I run disk utility? ACL found but not expected on "Library/Application Support/Apple/ParentalControls/Users"

    I am finding this when I run repair disk permissions in disk utility:
    ACL found but not expected on “Library/Application Support/Apple/ParentalControls/Users”
    Why is there an access control list on parental controls on my MacBook?  I don't use parental controls and I am the only user of this MacBook. I'm an old guy too, so it's not my Mom putting controls on the MacBook! ;-)
    Thanks!
    MacBook Pro 9, 2
    System Version: OS X 10.8.5 (12F45)
    Kernel Version: Darwin 12.5.0
    Boot Mode: Normal

    From the article I posted a hyperlink to in my 1st post (at bottom): You can also usually ignore any "ACL found but not expected..." message. These messages can occur if you change permissions on a file or directory; they are accurate, but generally not a cause for concern.

  • Repeating error message: "acl found but not expected" during permissions repair

    repeating error message: "acl found but not expected" during permissions repair
    My iMac is running slow. Processor running all the time. I was told to do permissions repair, so I did that. I get 100's and 100's of "ACL found but not expected" while doing a permissions repair in 'utilities'. It says 1 minute to complete but runs for a half hour. When it finally completes, I can restart the permissions repair again and it starts all over with same endless messages. Even though its says 'repaired', these ACL issues keep coming.
    SEE BELOW ... What's wrong? And How do I fix it?
    Kind thanks for your suggestions,
    Vic
    Hardware Overview:  Model Name: iMac
      Model Identifier: iMac8,1
      Processor Name: Intel Core 2 Duo
      Processor Speed: 2.8 GHz
      Number Of Processors: 1
      Total Number Of Cores: 2
      L2 Cache: 6 MB
      Memory: 4 GB
      Bus Speed: 1.07 GHz
      Boot ROM Version: IM81.00C1.B00
      SMC Version (system): 1.30f1
    Serial Number (system): W884000HZE4  Hardware UUID: BF3B8113-E0F0-54DB-9062-B73A0E4DB0F2
    Repairing permissions for “Vic's iMac”ACL found but not expected on “Library/Printers”Repaired “Library/Printers”ACL found but not expected on “Library/Printers/Icons”Repaired “Library/Printers/Icons”Group differs on “Library/Printers/InstalledPrinters.plist”; should be 80; group is 0.Permissions differ on “Library/Printers/InstalledPrinters.plist”; should be -rw-rw-rw- ; they are -rw-r--r-- .Repaired “Library/Printers/InstalledPrinters.plist”ACL found but not expected on “private/etc/apache2/extra/httpd-ssl.conf”Repaired “private/etc/apache2/extra/httpd-ssl.conf”ACL found but not expected on “Library/Application Support/Apple/Remote Desktop”Repaired “Library/Application Support/Apple/Remote Desktop”ACL found but not expected on “Library/Application Support/Apple/Remote Desktop/Notify”Repaired “Library/Application Support/Apple/Remote Desktop/Notify”ACL found but not expected on “Library/Preferences/Xsan”Repaired “Library/Preferences/Xsan”ACL found but not expected on “Library/Printers/Canon”Repaired “Library/Printers/Canon”ACL found but not expected on “Library/Printers/Canon/IJScanner”Repaired “Library/Printers/Canon/IJScanner”ACL found but not expected on “Library/Printers/Canon/IJScanner/Frameworks”Repaired “Library/Printers/Canon/IJScanner/Frameworks”ACL found but not expected on “Library/Printers/Canon/IJScanner/Plugins”Repaired “Library/Printers/Canon/IJScanner/Plugins”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources”Repaired “Library/Printers/Canon/IJScanner/Resources”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons”Repaired “Library/Printers/Canon/IJScanner/Resources/CIJIcons”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan5600F.icns”Repa ired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan5600F.icns”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan9000F.icns”Repa ired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScan9000F.icns”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE100.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE100.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE110.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE110.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE200.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE200.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE210.icns”Re paired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE210.icns”AC L found but not expected on “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE700F.icns”R epaired “Library/Printers/Canon/IJScanner/Resources/CIJIcons/CIJCanoScanLiDE700F.icns”A CL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_07.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_07.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_08.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICACPG_08.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICADAT.DAT”Repair ed “Library/Printers/Canon/IJScanner/Resources/Parameters/CNCICA/ICADAT.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2413/CNQ2413P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ2414/CNQ2414P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4807/CNQ4807P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808A.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808A.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808W.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4808/CNQ4808W.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ4809/CNQ4809P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9601/CNQ9601P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”Repaired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ1908D.TBL”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ1908D.TBL”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602A.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602A.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602N.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602N.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602P.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602P.DAT”ACL found but not expected on “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602W.DAT”Rep aired “Library/Printers/Canon/IJScanner/Resources/Parameters/CNQ9602/CNQ9602W.DAT”ACL found but not expected on “Library/Printers/PPDs”Repaired “Library/Printers/PPDs”ACL found but not expected on “Library/Printers/PPDs/Contents”Repaired “Library/Printers/PPDs/Contents”ACL found but not expected on “Library/Printers/PPDs/Contents/Resources”Repaired “Library/Printers/PPDs/Contents/Resources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component”Repaired “Library/QuickTime/AppleIntermediateCodec.component”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Info.plist”Repaire d “Library/QuickTime/AppleIntermediateCodec.component/Contents/Info.plist”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/MacOS/AppleInterme diateCodec”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/PkgInfo”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/PkgInfo”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/AppleInt ermediateCodec.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/AppleInt ermediateCodec.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Dutch.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/English. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/French.l proj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/German.l proj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Italian. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Japanese .lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/Spanish. lproj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ar.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ca.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/cs.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/da.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/el.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/fi.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/he.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hr.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/hu.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/id.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ko.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ms.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/no.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pl.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/pt_PT.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ro.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/ru.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sk.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/sv.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/th.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/tr.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/uk.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj ”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj ”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj /Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/vi.lproj /Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_CN.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj/Localized.rsrc”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/Resources/zh_TW.lp roj/Localized.rsrc”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature”Rep aired “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature/Cod eResources”Repaired “Library/QuickTime/AppleIntermediateCodec.component/Contents/_CodeSignature/Cod eResources”ACL found but not expected on “Library/QuickTime/AppleIntermediateCodec.component/Contents/version.plist”Repa ired “Library/QuickTime/AppleIntermediateCodec.component/Contents/version.plist”

    VicDesotelle wrote:
    repeating error message: "acl found but not expected" during permissions repair
    My iMac is running slow. Processor running all the time. I was told to do permissions repair, so I did that. I get 100's and 100's of "ACL found but not expected" while doing a permissions repair in 'utilities'. It says 1 minute to complete but runs for a half hour. When it finally completes, I can restart the permissions repair again and it starts all over with same endless messages. Even though its says 'repaired', these ACL issues keep coming.
    ACLs are just junk left over from previously installed OSXs. Just ignore. They have no impact.
    Describe your exact issue and computer specs and Linc may run you through a series of tests which may well help you find the problem to your issues. I agree, Permissions repair is rarely required.
    Cheers
    Pete

  • Grub background is found but not showing

    This is my grub.cfg:
    GRUB_DEFAULT=0
    GRUB_TIMEOUT=5
    GRUB_DISTRIBUTOR="Arch"
    GRUB_CMDLINE_LINUX_DEFAULT="quiet"
    GRUB_CMDLINE_LINUX=""
    # Preload both GPT and MBR modules so that they are not missed
    GRUB_PRELOAD_MODULES="part_gpt part_msdos png"
    # Uncomment to enable Hidden Menu, and optionally hide the timeout count
    #GRUB_HIDDEN_TIMEOUT=5
    #GRUB_HIDDEN_TIMEOUT_QUIET=true
    # Uncomment to use basic console
    GRUB_TERMINAL_INPUT=console
    # Uncomment to disable graphical terminal
    #GRUB_TERMINAL_OUTPUT=console
    # The resolution used on graphical terminal
    # note that you can use only modes which your graphic card supports via VBE
    # you can see them in real GRUB with the command `vbeinfo'
    GRUB_GFXMODE=1024X768
    # Uncomment to allow the kernel use the same resolution used by grub
    GRUB_GFXPAYLOAD_LINUX=keep
    # Uncomment if you want GRUB to pass to the Linux kernel the old parameter
    # format "root=/dev/xxx" instead of "root=/dev/disk/by-uuid/xxx"
    #GRUB_DISABLE_LINUX_UUID=true
    # Uncomment to disable generation of recovery mode menu entries
    GRUB_DISABLE_RECOVERY=true
    # Uncomment and set to the desired menu colors. Used by normal and wallpaper
    # modes only. Entries specified as foreground/background.
    GRUB_COLOR_NORMAL="light-blue/black"
    GRUB_COLOR_HIGHLIGHT="black/white"
    # Uncomment one of them for the gfx desired, a image background or a gfxtheme
    GRUB_BACKGROUND="/home/joel/grub/115887-archboot.png"
    #GRUB_THEME="/path/to/gfxtheme"
    # Uncomment to get a beep at GRUB start
    #GRUB_INIT_TUNE="480 440 1"
    #GRUB_SAVEDEFAULT="true"
    after, runing grub-mkconfig:
    Generating grub.cfg ...
    Found background: /home/joel/grub/115887-archboot.png
    Found linux image: /boot/vmlinuz-linux
    Found initrd image: /boot/initramfs-linux.img
    done
    When I reboot, I can see the colors in menu, but not the image:
    1.- Yes, the png exists
    2.- image file is 1024X768, same as GRUB_GFXMODE
    3.- I try commenting and uncommenting the lines GRUB_COLOR_HIGHLIGHT and GRUB_COLOR_NORMAL, and still not showing the background
    any ideas, please?

    cat of "/boot/grub/grub.cfg":
    # DO NOT EDIT THIS FILE
    # It is automatically generated by grub-mkconfig using templates
    # from /etc/grub.d and settings from /etc/default/grub
    ### BEGIN /etc/grub.d/00_header ###
    insmod part_gpt
    insmod part_msdos
    insmod png
    if [ -s $prefix/grubenv ]; then
    load_env
    fi
    set default="0"
    if [ x"${feature_menuentry_id}" = xy ]; then
    menuentry_id_option="--id"
    else
    menuentry_id_option=""
    fi
    export menuentry_id_option
    if [ "${prev_saved_entry}" ]; then
    set saved_entry="${prev_saved_entry}"
    save_env saved_entry
    set prev_saved_entry=
    save_env prev_saved_entry
    set boot_once=true
    fi
    function savedefault {
    if [ -z "${boot_once}" ]; then
    saved_entry="${chosen}"
    save_env saved_entry
    fi
    function load_video {
    if [ x$feature_all_video_module = xy ]; then
    insmod all_video
    else
    insmod efi_gop
    insmod efi_uga
    insmod ieee1275_fb
    insmod vbe
    insmod vga
    insmod video_bochs
    insmod video_cirrus
    fi
    set menu_color_normal=light-blue/black
    set menu_color_highlight=blue/white
    if [ x$feature_default_font_path = xy ] ; then
    font=unicode
    else
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 43394d54-1950-4c8c-8d9b-71173729d4fe
    else
    search --no-floppy --fs-uuid --set=root 43394d54-1950-4c8c-8d9b-71173729d4fe
    fi
    font="/usr/share/grub/unicode.pf2"
    fi
    if loadfont $font ; then
    set gfxmode=1024X768X16
    load_video
    insmod gfxterm
    set locale_dir=$prefix/locale
    set lang=es_MX
    insmod gettext
    fi
    terminal_input console
    terminal_output gfxterm
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 43394d54-1950-4c8c-8d9b-71173729d4fe
    else
    search --no-floppy --fs-uuid --set=root 43394d54-1950-4c8c-8d9b-71173729d4fe
    fi
    insmod png
    background_image -m stretch /home/joel/grub/115887-archboot.png
    set timeout=5
    ### END /etc/grub.d/00_header ###
    ### BEGIN /etc/grub.d/10_linux ###
    menuentry 'Arch GNU/Linux, with Linux core repo kernel' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-true-43394d54-1950-4c8c-8d9b-71173729d4fe' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 43394d54-1950-4c8c-8d9b-71173729d4fe
    else
    search --no-floppy --fs-uuid --set=root 43394d54-1950-4c8c-8d9b-71173729d4fe
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=UUID=43394d54-1950-4c8c-8d9b-71173729d4fe ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux.img
    menuentry 'Arch GNU/Linux, with Linux core repo kernel (Fallback initramfs)' --class arch --class gnu-linux --class gnu --class os $menuentry_id_option 'gnulinux-core repo kernel-fallback-43394d54-1950-4c8c-8d9b-71173729d4fe' {
    load_video
    set gfxpayload=keep
    insmod gzio
    insmod part_msdos
    insmod ext2
    set root='hd0,msdos1'
    if [ x$feature_platform_search_hint = xy ]; then
    search --no-floppy --fs-uuid --set=root --hint-bios=hd0,msdos1 --hint-efi=hd0,msdos1 --hint-baremetal=ahci0,msdos1 43394d54-1950-4c8c-8d9b-71173729d4fe
    else
    search --no-floppy --fs-uuid --set=root 43394d54-1950-4c8c-8d9b-71173729d4fe
    fi
    echo 'Loading Linux core repo kernel ...'
    linux /boot/vmlinuz-linux root=UUID=43394d54-1950-4c8c-8d9b-71173729d4fe ro quiet
    echo 'Loading initial ramdisk ...'
    initrd /boot/initramfs-linux-fallback.img
    ### END /etc/grub.d/10_linux ###
    ### BEGIN /etc/grub.d/20_linux_xen ###
    ### END /etc/grub.d/20_linux_xen ###
    ### BEGIN /etc/grub.d/20_memtest86+ ###
    ### END /etc/grub.d/20_memtest86+ ###
    ### BEGIN /etc/grub.d/30_os-prober ###
    ### END /etc/grub.d/30_os-prober ###
    ### BEGIN /etc/grub.d/40_custom ###
    # This file provides an easy way to add custom menu entries. Simply type the
    # menu entries you want to add after this comment. Be careful not to change
    # the 'exec tail' line above.
    ### END /etc/grub.d/40_custom ###
    ### BEGIN /etc/grub.d/41_custom ###
    if [ -f ${config_directory}/custom.cfg ]; then
    source ${config_directory}/custom.cfg
    elif [ -z "${config_directory}" -a -f $prefix/custom.cfg ]; then
    source $prefix/custom.cfg;
    fi
    ### END /etc/grub.d/41_custom ###

  • Dick Permission--"ACL" found but not expected...

    Safari/internet access is great after I do a disk permission verify & repair. After a week or so it is back to the slow mode. WHAT is "ACL"? and why does it go back after I have repaired the disk permissions? Here is a typical line of the detail
    ACL found but not expected on "System/Library/User Template/English.lproj/Library/Keyboard Layouts".

    ACL is Access Control List and has to do with permissions, the notice you get doesn't have anything to do with Safari and can be safely ignored, it turns up on most people's permissions lists. Safari probably clogs up because the cache fills up. Go to Safari in the menu bar and select 'empty cache'. It also helps to quit and restart Safari often to stop it from hogging the CPU.

Maybe you are looking for

  • Need to upgrade my hardward...advice please?

    BeeJay just answered a similar question, but this is slightly different. Help is appreciated... The new Mac Pros are up, which I'm sure we've all seen, and I have been holding out. I'm running currently, Logic 7, on dual 2.3G processors, on a G5, 10.

  • "Error writing to file" when installing Oracle9i

    I am fairly new to Oracle and have not been able to install Oracle 9i on my Redhat 7.2 box. In three attempts to install I have encountered the same error at some point, usually early on 5% or 10% into the install. The error is:      "Error in writin

  • Color correction with a HD TV

    Can I use my new Panasonic HD TV model TH-42PX80U as a NTSC monitor for secondary color correction using both Final Cut Pro out of a Macbook Pro intel? What cable I can use to conect via HDMI? Will the color acuracy will be similar to that of a NTSC

  • How to clear out foreign divested entities at Parent Currency when have CFCTA?

    We have stopped loading some entities which we divested in the prior fiscal year (2013).  Now, in the current fiscal year (2014), the Retained Earning rollforward logic is carrying forward the prior year P12 ending balance.  We can manually adjust ou

  • Eail content of type html is dependent on which parameters?

    Hi, I have to parse email content which is of type html. I have to take the reply message given and put that in database. Sometimes the reply message is put in DIV tags and some times in P tags. I want to know based on what parameters the content of