OEM Oracle10g / Oracle Databases = 9i

Hello,
is it possible to manage the Oracle Databases previous versions : 7.3.4 and/or 8i, using OEM (from Ora10g or from Ora9i) ?
Thank you to help me
Robert

I know it is possible to use OEM 9i to manage an 8i database. OEM 9i is backward compatible with 8i database. If you need the full functionality of OEM 9i, then you might need to install the agent in a different home on the 8i instance server. Otherwise, you can live with the functionality provided by 8i agent.

Similar Messages

OEM for oracle database 10.2.0.3 .where to install

Hi ..i have Oracle Database 10g Enterprise Edition Release 10.2.0.3.0 installed in my pc and looking to install oracle enterprise manager but only agent is avalble in oracle website.please let me know how to install oem for 10g

Hi,
You can refer to below metalink doc for the complete steps for configuring the EM DBcontrol for your standalone DB instance
How To Drop, Create And Recreate the Database Control (DB Control) Release 10g and 11g (Doc ID 278100.1)
Regards,
Rahul

OEM Oracle10g and databases = 9i

Hi,
Does OEM (from Ora10g or from Ora9i) make it possible to manage Oracle Databases previous versions : 7.3.4 and/or 8i ... ?
Robert

Sorry for the mistake...
Thanks in advance for any of your reply.

Performance Tab in OEM ( Oracle database Standard Edition )

We have Oracle database 11g ( Standard edition ONE).
We have installed OEM (oracle enterprise manager) with database installation.
We are not able to access the PERFORMANCE tab in OEM.
1) Is it because Performance tab cannot be seen in Standard Edition ONE version ?
2) When I tried to setup the control_management packaccess parameter in SPFILE, its failing . Is it because
of the database edition ?
3) Any work around in Standard Edition ONE to make the performance tab and tuning pack available with licensing ?

Pl identify which specific version of 11g.
I believe the answers are in the docs -
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/editions.htm#CIHBAEID
http://download.oracle.com/docs/cd/E11882_01/license.112/e10594/options.htm#autoId28
HTH
Srini

Monitoring oracle database from OEM 12c grid control

Hi,
I am using OEM 12c grid control to analysis various server's performance. The application database in oracle database v11g. Is there any problem if i add database on oem to monitor? To be more clear, If it creates any conflict between database's em and oem's em when i want to deploy em agent on database ? Is it necessary to remove database's EM before installing oem agent on it?

Rakesh,
Please refer to the following links:
SOA and Middleware Management
http://www.oracle.com/technology/products/oem/prod_focus/soa_mgmt.html
New Oracle Enterprise Manager Management Pack for SOA and Middleware Management
http://blogs.oracle.com/oem/2009/06/new_oracle_enterprise_manager_1.html
ORACLE ENTERPRISE MANAGER 10g: ORACLE MANAGEMENT PACK PLUS FOR SOA
http://www.oracle.com/technology/products/oem/pdf/ds_soa_mgmt_pack.pdf
Regards,
Hussein

Use OEM to monitor oracle database size

Hello All,
We currently have several database which are currently monitored via OEM however i will appreciate if anyone can tell me how i can monitor the the size of my oracle databases via oem
Thanks

Hi,
I'm not sure of OEM will monitor database size, but many 3rd party tools do.
There are many ways to achieve Oracle table monitoring, and many create specialized extension metadata tables to monitor Oracle table growth. In Oracle 10g you can perform Oracle tables monitoring with the dba_hist_seg_stat tables, specifically the space_used_total column.
On my databases, I create STATSPACK extension tables to track table and overall database growth:
http://www.dba-oracle.com/te_table_monitoring.htm
The full scripts are in my Oracle Press book, Oracle tuning with STATSPACK . . .
http://www.amazon.com/Oracle9i-High-Performance-Tuning-STATSPACK-Burleson/dp/007222360X
Hope this helps . . .
Donald K. Burleson
Oracle Press author
Author of "Oracle Tuning: The Definitive Reference"
http://www.rampant-books.com/book_2005_1_awr_proactive_tuning.htm

Prob :Concurrent hitting of oracle Database using oracle10g apps datasource

Hai friends,
Hitting oracle database concurrently,Using EJB deployed in oracle apps server,we are getting connection from the datasource and performing select query from the same database and same table and same record.we are getting the exception,
1)java.sql.SQLException: org.apache.bcel.classfile.ClassFormatException: Invalid method signature: java/lang/String;Ljava/lang/String;)Voracle.oc4j.sql.proxy.SQLBCELProxy.oc4j_createConstructionKey(SQLBCELProxy.java:391)
oracle_jdbc_driver_LogicalConnection_Proxy.prepareStatement()
com.bpms.core.dao.OracleDataServiceObjectImpl.executeQuery(OracleDataServiceObjectImpl.java:811)
2)java.lang.InstantiationException: org.apache.bcel.classfile.ClassFormatException: Invalid method signature: java/lang/String;)Voracle.j2ee.connector.proxy.BCELProxyFactory.createProxy(BCELProxyFactory.java:382)
oracle.j2ee.connector.proxy.BCELProxyFactory.getProxy(BCELProxyFactory.java:141)
oracle.oc4j.sql.proxy.SQLBCELProxyFactory.getProxy(SQLBCELProxyFactory.java:47)
oracle.j2ee.connector.proxy.AbstractProxy.oc4j_getProxyForReturnedObject(AbstractProxy.java:105)
oracle_jdbc_driver_LogicalConnection_Proxy.prepareStatement()
thanks in advance,
by,
vijay

Hi Damorgan,
Thanks for the response. Here are the details
From PROD 9i
SQL> select * from v$version;
BANNER
Oracle9i Enterprise Edition Release 9.2.0.7.0 - Production
PL/SQL Release 9.2.0.7.0 - Production
CORE 9.2.0.7.0 Production
TNS for Solaris: Version 9.2.0.7.0 - Production
NLSRTL Version 9.2.0.7.0 - Production
SQL>
Total Schemas 225
Tables 27428
From 11g
BANNER
Oracle Database 11g Enterprise Edition Release 11.2.0.1.0 - 64bit Production
PL/SQL Release 11.2.0.1.0 - Production
CORE 11.2.0.1.0 Production
TNS for Linux: Version 11.2.0.1.0 - Production
NLSRTL Version 11.2.0.1.0 - Production
SQL>
Total schemas 37
Total Tables : 2806
But the problem is not with the query. Query is running only for 10 to 15 min. But exporting the data(to a flat file like CSV/TXT) is taking most of the timing like more than 4 hours.
Not Huge amount of data. Only 45,000 + rows. I want to get rid of this time consuming process. Help me to solve this issue.
Thanks
Vimal

Import error on Oracle Database Express 10.2.0.1.0

Hi,
I try to import data from oracle V10.01.02 running on SUSE10 Linux to
oracle 10g (10.1.0.2.0) running on Windows Server 2003.
I am able to import the big part from my ata, but not all data.
The begin of my log file is:
Connected to: Oracle Database 10g Enterprise Edition Release 10.1.0.2.0
- Production
With the Partitioning, OLAP and Data Mining options
Export file created by EXPORT:V10.01.00 via conventional path
And after some time I receive:
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "SAFCI"."EMP"."NAME"
(actual: 65, maximum: 64)
Column 1 1000005025
Column 2 ??????? ???????
Column 3 19-SEP-2002:00:00:00
Column 4 9089
Column 5 ??. ?????
Column 6 1.9828
Column 7 377.77
Column 8 75.55
Column 9 ???????????? ???????? ? ??? ???? ? 32 ??.
Column 10 19-SEP-2002:00:00:00
Column 11 ?????? ?????, ?.?. 172747675, ???. 23.11.200?
Column 12 ????????? ?????????
Column 13 ? ????
Column 14 T
Column 15
Column 16 F
IMP-00019: row rejected due to ORACLE error 12899
IMP-00003: ORACLE error 12899 encountered
ORA-12899: value too large for column "SAFCI"."EMP"."NAME"
(actual: 65, maximum: 64)
Column 1 1000006408
Column 2 ??????? ???????
Column 3 05-NOV-2002:00:00:00
Column 4 9089
Column 5 ??. ?????
Column 6 1.939
Column 7 82
Column 8 16.4
Column 9 ?????????? ? ???? ???? ? 40 ??.
Column 10 05-NOV-2002:00:00:00
Column 11 ?????? ?????, ?.?. 172747675, ???. 23.11.200?
Column 12 ????????? ?????????
Column 13 ? ????
Column 14 T
Column 15
Column 16 F 36943 rows imported
I can not understand this problem, because I exported the hole user and
also try to import the hole user in my new system.
Pls., can some one point me to some paper about this problem or help me
to solve the problem.
Thanks
configuration Oracle10g (EXP source)
SQLWKS> select * from nls_database_parameters
2>
PARAMETER VALUE
NLS_LANGUAGE BRAZILIAN PORTUGUESE
NLS_TERRITORY BRAZIL
NLS_CURRENCY R$
NLS_ISO_CURRENCY BRAZIL
NLS_NUMERIC_CHARACTERS ,.
NLS_CHARACTERSET WE8ISO8859P1
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD/MM/RR
NLS_DATE_LANGUAGE BRAZILIAN PORTUGUESE
NLS_SORT WEST_EUROPEAN
NLS_TIME_FORMAT HH24:MI:SSXFF
NLS_TIMESTAMP_FORMAT DD/MM/RR HH24:MI:SSXFF
NLS_TIME_TZ_FORMAT HH24:MI:SSXFF TZR
NLS_TIMESTAMP_TZ_FORMAT DD/MM/RR HH24:MI:SSXFF TZR
NLS_DUAL_CURRENCY Cr$
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.1.0.2.0
configuration Oracle10g Express (IMP destination)
SQL> select * from nls_database_parameters;
PARAMETER VALUE
NLS_LANGUAGE AMERICAN
NLS_TERRITORY AMERICA
NLS_CURRENCY $
NLS_ISO_CURRENCY AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET AL32UTF8
NLS_CALENDAR GREGORIAN
NLS_DATE_FORMAT DD-MON-RR
NLS_DATE_LANGUAGE AMERICAN
NLS_SORT BINARY
NLS_TIME_FORMAT HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY $
NLS_COMP BINARY
NLS_LENGTH_SEMANTICS BYTE
NLS_NCHAR_CONV_EXCP FALSE
NLS_NCHAR_CHARACTERSET AL16UTF16
NLS_RDBMS_VERSION 10.2.0.1.0

Hi
Your import database use a multibyte characterset, your export db a singlebyte cs.
This means, a char can need more than 1 byte.
Try this before import (and before create tables!!):
alter system set nls_length_semantics=char;Greetings
Sven

Installation error message for Oracle Database software for version 10g

Would someone be able to advise why I keep getting the following error message whilst installing Oracle trial Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition? Link listed below : -
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Error message "Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp"
Below is the 12 steps that I go through, please advise what I'm doing wrong : -
1. (Operations) default is Create a database
2. (Database templetes) default is general purpose
3. (Database Identification) projemp.local for Global database name & projemp for SID
4. (Management options) default is "Configure the database with Enterprise manager, also the options button has been clicked for "Use database control for database management"
5. (Database Credentials) the options button has been clicked for "Use the same password for all accounts" so I've set up a new password, was that correct?
6. (Storage options) the options button is clicked for "File System - use the file system for database storage.
7. (Database file locations) the options button is clicked for "Use database file locations for template" Is this option correct? Other options are Use common location for all database files or use Oracle-managed files?
8. (Recovery configuration) the options button is clicked for "Specify flash recovery area
9. (Database content) nothing has been selected, the only option is "Sample schemas" should that be clicked?
10. (Initialization parameters) the options button is clicked for "Typical- allocate memory as a % of the total physical memory
11. (Database storage) no options available
12. (Creation options) the options button has been selected for "Create Database"
Click finish
I then get a screen stating General purpose, click OK then I get the following error message as stated at the start of this e-mail ""Cannot create directory"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".
Regards
Phil

855880 wrote:
I have been trying to install the "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition" about six times with no success.Do you realize you just mentioned 3 different and distinct products? So which one are you installing?
>
I've gone through my courses instructions as listed above (1-12) and end up with the following error message"C:\oracle\product\10.2.0\db_7\cfgtoollogs\dbca\projemp".What course?
>
I've removed the software from my computer using control panel, programs & features then uninstall once but the other five times the software hasn't been listed. Whilst the Oracle was on my task bar I was able to install using Start > Programs > Oracle - HOME-NAME > Database Administration > Database Configuration Assistant.No you didn't. Database Configuration Assistant does not remove software. It can remove a database. As I mentioned before, there is a difference between the software and the objects that software manages. Deleting an Excel spreadsheet is not the same as deleting Microsoft Office. Deleting an Oracle database with Database configuration assistant is not the same as removing the Oracle software.
>
Now that oracle is not on my task bar I've unzipped the link below, clicked on db, Disk1, setup, changed the Database password (is that correct?) install and I get the following error message "Check complete. The overall result of this check is: Failed<<<<<
Problem: The install has detected that the primary IP address of the system is DHCP-assigned.
Recommendation: Oracle supports installations on systems with DHCP-assigned IP addresses;
However, before you can do this, you must configure the Microsoft LoopBack Adaptor to be the primary network adapter on the system. See the installation Guide for more details on installing the software on systems configured with DHCP."
So what did you do with the above error message? Did you follow up on what it said? Did you read the very fine Installation Guide that comes with the software? Did you read the section on networking considerations where it discussed DHCP assigned addresses and installing the loopback adapter?
http://www.oracle.com/technology/software/products/database/oracle10g/index.html
Ok, that link takes us to the download page, which does not shed any light at all on your problems
I'm using Windows Vista Home Premium, 32 bit operating system, and my computer is saying I have 142 GB free space.
If you read the installation manual that came with the downloaded software, you'd have seen in the prerequisites that Home editions of Windows are NOT listed as supported platforms, whereas Business, Enterprise, and Ultimate editions specifically ARE listed as supportd.
Hope this is some help.And
I'm not to clever on computers so would you be able to advise how I get to the command window to issue the SET command please?
Also I've no idea what OS user I am, I'm taking an on-line Oracle course and been advised to install "Oracle Database software for version 10g Release 2 Standard Edition, Standard Edition One, and Enterprise Edition"
How do I find out if I'm part of an Administrator, ORA_DBA group ?
Can you walk me through how to create the directory from command line please?Ok, given the above statements from you, I'm not even sure where to begin. I don't want to be cruel, but this self-admitted lack of even the most rudimentary knowledge by someone attempting to learn about Oracle is truly astounding. What course are you taking? Why are you taking this course?

Oracle Database VM Template - too many issues

Just wanted to offer my experience with the Oracle VM Template, specifically for 64-bit Oracle Database 11g (11.1). We decided to try out Oracle VM and the templates on a new server, we thought the promise of the templates could drastically decrease our time spent installing and setting up new boxes.
Setting up the template and getting it running was a breeze, although Oracle could have better documented things. Some passwords and important steps were left out that I had to figure out after the fact.
The real nightmare is the Oracle database installation it comes with. I guess they call this an OEM installation - but it's complete crap. Nothing really works like it should, and I found it to be a lost-cause trying to get it to work after awhile. Enterprise Manager comes disabled - what kind of database installation is this without enterprise manager? I guess they think everyone is using Grid Control - although I'm not even convinced Grid Control would have worked with all the issues going on.
I spent a day trying configure the installation to get things working, then realized packages were missing, needed for anything other than the database engine to run, due to the stripped version of oracle linux the template uses.
None of this was documented or explained at all. There's nothing on metalink..pretty much nothing. If you want a simple database that you can connect to and run sql queries through sql plus, this might just work. But it's far from a typical production setup. I would steer clear of this.

Hi there,
VPD (Virtual Private Database) is a feature of the Oracle Enterprise Edition:
http://www.oracle.com/technology/deploy/security/database-security/virtual-private-database/index.html
It's in the dbms_rls package.
HTH, Peter

Can we install Oracle Database 10g 32 bit on Windows 2008 64bit

Can we install Oracle Database 10g 32 bit on Windows 2008 64bit will there be any disadvantages, will all the features of Oracle database work ( Like Data Guard , OEM, Grid Control).
Solution will be appriciated.

Hi,
If it is true can you please give me some reference doc, as per my knowledge installing Oracle Database 10g 32 bit on Windows 2008 64bit must be possible.
Thanks & Redards

How can we clone the Oracle database in new Oracle Home

Hi,
I would like to clone oracle database into new oracle home. How can we set it using OEM.
I am using 10g grid control. Target db is on solaris
Thanks
Naveen

after logging into target database, under maintenance tab, data movement header; ther is "clone database" option. When you click on it; you'll see :
Clone Database uses RMAN to duplicate a database from:
-- An open database in ARCHIVELOG mode, or
-- An open database in NOARCHIVELOG mode (restart required), or
-- A saved working directory from previous cloning
Clone Database performs the following operations:
-- Backup each database file and store it in a working directory
-- Transfer each backup file from source to destination host
-- Restore each backup file to existing destination Oracle Home
-- Recover the cloned database with saved archived log files
-- Open the cloned database with resetlogs
It seems to be for cloning to a different host, but i guess you can chose the same host for source and destination. (I've never used cloning on em by the way :))
But firstly, you should create a new oracle home, you can simply copy your oracle home with a new name (cp -R /oracle/app/oracle/product/10.2.0 /oracle/app/oracle/product/10.2.0.new) or make a new installation.
I suggest you to do this cloning with CLI. You should take a full backup with RMAN, copy the oracle home, create a new initNEWSID.ora file and nomount the database, restore (or simply copy) controlfiles, restore database (with set newname commands), recover database, open resetlogs.

Oracle Database 10g JDBC Samples on OTN

Review the OTN's new Oracle Database 10g JDBC Samples that illustrate new features introduced with Oracle10g JDBC Driver. The features illustrated are Connection Cache, Named Parameter Support, IEEE Datatypes, Thin Driver support for PLSQL Index by Tables and Web Rowset. Also watch out for samples on Datalinks, New Encryption Algorithms, Globalization Support, Shortcuts for CLOB manipulation and more to be hosted shortly.
The samples are available at,
http://otn.oracle.com/sample_code/tech/java/sqlj_jdbc/files/oracle10g/index.html

I suppose that is nice.
It would be even nicer if the drivers actually conformed to JDBC so that one could for example reliably use blobs in a J2EE server with CMP.

Doubt regarding Oracle Database 10g Release 2 (10.2.0.1.0) installation

hello
my pc has following configurtion
256mb ram
60gb hdd
p4 2.4 ghz
win xp pro sp2
I want to know if my pc will be able to run " Oracle Database 10g Release 2 (10.2.0.1.0) " standard edition on it.
<<http://www.oracle.com/technology/software/products/database/oracle10g/htdocs/10201winsoft.html>>
I thought of increasing RAM, but it is not feasible.
I know i could run oracle XE, but can my pc also run the standard edition.
I could not find minimum hardware requirements for standard edition on this site.
anyway, i will use it for sql and and other advanced concepts in RDBMS which i may learn during my course in database. so i prefer standard edition instead of XE
any help greatly appreciated
thanks in advance

I suggest you not to doubt regarding Oracle Database 10g Release 2 (10.2.0.1.0) installation.
It is not necessary. If you don't receive an answer within a reasonable amount of time you could edit your thread with whatever ( a period is enough) to raise it to the top once again.
It becomes difficult for us to track duplicated threads and unnecessarily duplicates efforts.
~ Madrid.

Unable to download Oracle Database 10g Release 1 (10.1.0.2)

Got following message when I tried to download
Oracle Database 10g Release 1 (10.1.0.2)
Server Error
The following error occurred:
[code=SERVER_RESPONSE_RESET] The server response could not be read because of an error. Contact your system administrator.
Is any solution available

Seems to be working fine. You can try any one of these links:
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-west.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-east.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe
[url http://www.oracle.com/technology/software/htdocs/xe_lic_prod.html?http://download-uk.oracle.com/otn/nt/oracle10g/xe/10201/OracleXE.exe]OracleXE.exe

OEM Oracle10g / Oracle Databases = 9i

Similar Messages

Maybe you are looking for