OEM showing 3 entries for one host

I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.

[email protected] wrote:
I have recently setup the OEM and dnt have much idea abt how it works.
But the main webpage is showing three entries for one particular host and the status of one out of them is pending. How can i remove two entries so that it becomes consistent.
saps.3 entries for one host? What have you configured, Database Console or Grid Console?
HTH
Aman....

Similar Messages

Fetch New Data shows two entries for one account

I have on a variety of accounts on my iPhone and my iPad: an iCloud, an Exchange, a IMAP, and a couple of Gmail accounts.
Earlier this week, I noticed that in the "Fetch New Data" setting (Settings > Mail, Contacts, Calendar > Fetch New Data), there are TWO entries for one of the Gmail accounts.
One entry lists "Mail and Calendars." I use this for this particular Gmail account. I have these selected in the "Accounts" section of Settings > Mail, Contacts, Calendar.
The other entry lists "Contacts and Calendars." I don't sync Contacts, but I do sync Calendars. Why is it listed twice?
I tried deleting
the offending Gmail account, but it did not delete the duplicate entries.
erasing all settings
all of my accounts, including iCloud, IMAP, and other accounts.
The ghost account is still there, fetching calendars and contacts.
Has anyone else seen this behavior?
I considered erasing settings and content, but that seems pretty extreme for something that might not be that big of an issue.

Exact same problem here!!! Iphone 5s with IOS 7.0.3, using Gmail among other email providers.
So it is definately a bug - the "fetch new data ghost account". I hope it will be solved in a newer release. In the meantime, I switched the ghost account to "manual" so it shouldn't interfere...

Can I open a port range in the firewall for one host?

Can I open a port range in the firewall for one host? In other words, I want to be able to open ports 54001 to 54050 to allow one remote host in my LAN to access that port range in my Mac Server. Is this possible? Currently, the only option I see is to open individual ports for all external hosts (eg http or https)
Thanks in advance!

Which version of OS X Server are you using?
Server 2.2 and earlier includes an interface to a software firewall that can be configured to open specific ports very easily. Descriptions of how to configure the firewall can be found in the documentation for these versions.
Server 3.x no longer has an interface to the software firewall - it is still there, but you need to use other methods do configure it. A popular example of such a method is the icefloor utility.
Apple suggest that for Server 3 you delegate firewall duties to an external router. Server 3 includes the ability to configure the firewall component of Apple Airport routers 'automatically'
if you connect a machine running Server 3 directly to an Airport Router the router appears in the LH pane in the Server.app window (usually second line, below the entry for the server itself), and you can control what services are 'enabled' through the firewall there.
a more common solution perhaps is to use a non-apple router, and configure the firewall (and so open specific ports) through whatever control interface is provided for that router. There are many many kinds of hardware router you could use, and the control interfaces used vary widely - so you will have to consulting the documentation for your own router to work out how to do this.
If you post information about your software versions, and hardware configuration, it is possible that you can get more specific help with the tasks involved in opening the ports.
Hope this helps.

Team Cal showing double entries for Att entered in Record Working Time

We just noticed in our QA testing that Attendances that we have included in our team calendar configuration is showing as multiple entries. Then when we check IT2002 the entries are fine. What could be causing these phantom entries to appear?
I've been looking at SPRO and PTARQ to see what could be causing it and I haven't seen anything out of the ordinary.
Thoughts?
Doug

Raja.D,
I can't think of any config that would cause the double entries. However, I am looking into the notes suggested in the replies above. In test mode for request its only showing 1 entry for each attendance, but in team calendar test it shows 2. Every attendance has one record with a request id and one without.
These attendances are entered through record working time, but are viewable through the team calendar.
Thanks,
Doug
Edited by: Doug Robbins on Feb 13, 2012 1:54 PM
Edited by: Doug Robbins on Feb 13, 2012 1:56 PM

Ipad still showing duplicate entries for songs.

my Ipad still showing duplicate entries for songs. I have unchecked Show Itunes in the Cloud purchases, I have tried replacing all items when autofilling (before syncing) I have even logged out then back into itunes, to no avail. Can you please assist? Thank you

hi guys, i was just googling the problem as i too have it, i am currently trying to sort it, i have deleted all my music off my phone using itunes and then put it all back on and also tried deleting it and outting 1 album on at a time, still not got rid of the duplicate tracks, i have now used the show duplicate items view and deleted those off my itunes library. i think i may have come across the problem!! i have just deleted all my music off my iphone using itunes again, and it shows nothing being on my iphone, however, if i go into music on my actual phone it is still showing 126 songs and none of them play. so i have now deleted them manually directly from the phone and am now putting all my music back onto my phone hoping i have cured the issue of ghost tracks.
ill let you know when its done if we are cured!!
BOOOOOMMMM!!!!! it worked!!! been so frustating, now its all good, hope this helps anyone with the same issues

Track changes showing multiple entries for a single change?

Hi there .. I'm using Pages '09 v4.1 to edit MS Word '97 documents. I've been using the 'track changes' feature to work on chapters in a book and have done so with no problems so far (about 6 chapters so far in separate files). I went to start the next chapter and noticed that when I make a single change such as highlighting a word and making it italic, the tracking bubbles will show up as individual entries for every letter instead of for a single word. The really annoying thing is that it's not consistent .. some whole-word changes show up as a single entry, while some show as a few entries but don't necessarily correspond to how many letters are in the word being changed. When I try deleting specific tracking bubbles to see which part of the word they correspond to, it varies. For example, if I put the word "similar" in italics on page one, paragraph one, it shows up as 2 entries. When I delete the last entry, "imilar" will go back to standard font, while "s" stays italic until I delete the other entry. It's as though the words in the document are being recognized based on something other than the obvious, and certain letters are being grouped together in the program's brain, while others are separate.
It's not isolated to italics, btw. If I reformat the entire document to be left-aligned instead of center-aligned, it will show lots of separate tracking bubbles in various places through the document, rather than showing one bubble for my single change.
I've tried duplicating and saving a new version of the document, as well as creating a new doc and pasting everything into that and saving as a new doc, though I wasn't sure if this would carry over the problem .. It did.
It's not the end of the world as far as finishing this job, but it's pretty annoying and will be worse for the person who ultimately verifies the changes I've made. Any help is greatly appreciated.

TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
TekWarrior wrote:
I'm part of the end user computing and we are in the process of making a consolidated tnsnames.ora file as part of our migration from Windows XP to 7.
The following two entries are to the same host, but are named different and use different ports, we can't locate the original programmer that set it up.
I need to know if this would cause conflicts or not?
PYRPROD.WORLD =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(Host = [same hostname])(Port = 1521))
    (CONNECT_DATA =
      (SID = pyrp1)
PYRP1 =
(DESCRIPTION =
    (ADDRESS_LIST =
      (ADDRESS = (PROTOCOL = TCP)(HOST = [same hostname])(PORT = 1526))
    (CONNECT_DATA =
      (SERVICE_NAME = pyrp1)
It won't cause any problem.

List View Showing Multiple Entries for Certain Records

I've been updating my large mp3 library with album art in order to make the list view more useful and fun to look at. With just a handful of records however I've noticed that they're getting split into multiple entries. For instance, Album X shows up twice, with one entry displaying only song 1 and the other entry displaying the rest of the songs.
I've looked hard at the tags but I don't see any difference. All the records in question were ripped using iTunes so they're not coming from different sources either.
Any thoughts would be hugely appreciated! Cheers.

Thanks again; I tried the solution this morning and it fixes the problem. I've marked the thread as such. Unfortunately it's a lot of fiddly updating, but hey, it's better than no workaround at all.

Target costs is showing as ZERO for one material in KKBC_ORD

Hi,
When i execute KKBC_ORD,It is showing the Total Target Costs as ZERO for one material.Cost estimate was already executed for that material.I couldnot find out the problem for this issue.
Kindly help me to find why it is giving the ZERO value for this Total Target Costs in KKBC_ORD transaction.
It would be a great help if any one helps me...
Thanks
Supriya

Dear,
Have you done the GR final DEV for order?
You need to do the variance calculation in KKS2, then when you save the variance, the target cost is calculated.
Target cost appear after GR. I think you are checking in CO03GotoCost--Analyasis.
Go to t.code OKEV.Select Controlling Area XXX and create Plan / Target version
Go to transaction OKV6 these settings control what values are used to update the target costs.
Target Costs=Actual Quantitiy X the Standard Cost Estimate Price..
Regards,
R.Brahmankar

When I move to the next record on a form it shows the entries for the previous record even though the record is actually null

I have a form that logs fibre analysis for asbestos analaysis. Let's say I am analysisng 2 samples. I log all the details for the first sample and hit save. Now I use the scroll button to move to the next sample. When the screen refreshes all the entries for the first sample are still showing on the screen. But these are just phantom entries, when I look at the back-end database there are of course no entries against the second sample. This does not occur with any other browser.
I have tried clearing the cache to no avail.
Any ideas?

Is Firefox filling the form via the cache or via saved form data?
If this data still gets filled when "Remember search and form history" is disabled the Firefox fills it from the cache.
*Tools > Options > Privacy > Firefox will: "Use custom settings for history": "Remember search and form history"
In such a case a hard refresh via Ctrl + F5 might help to reset the form data.

Two renewal orders and charges showing every month for one account and same renewal package, WHY

Why am I charged twice with two different orders every month for one package of 800 mins. Are they giving me 1600 minutes! I need only 800 minutes please, so please refund these extra order charges please. I just noticed this thing month today and on checking order history find that same practice has been followed for all my previous months transcations!

Hello and welcome to the Skype Community.
The duplicate charge has been reversed and the funds will be returned to you.

PROBLEM TRANSFERRING   MULTIPLE   DATA ENTRIES    FOR ONE KEY-FIELD.

DEAR   EXPERTS ,
   I HAVE TRANSFERRED DATA FROM THE FINAL INTERNAL TABLE OF MY ABAP REPORT (NOT ALV) TO CUSTOM Z-TABLE CREATED IN SE11.
BUT MY PROBLEM IS : I   COULD NOT   TRANSFER MULTIPLE   DATA ENTRIES   FOR A PARTICULAR FIELD.
FOR EXAMPLE : IN TABLE EKKO THERE ARE   FOUR EBELN-4900006375 AND FOR THAT DIFFERENT EBELP S ARE
PRESENT. I COULD TRANSFER ONLY THE FIRST ENTRY , THAT IS : EBELN - 4900006375 AND   EBELP - 0010,
AFTER THAT THE ZTABLE IS NOT GETTING UPDATED TO EBELN-4900006375 FOR EBELP - 0020 AND SO ON.
I HAVE TRIED ALL THE ' MODIFY, INSERT, UPDATE ' STATEMENTS. I HAVE USED AT - USERCOMMAND - HIDE AND CHECKBOXES.
   PLEASE   SUGGEST   A   SAMPLE   CODE   FOR   THIS.
Moderator message: please post again, but not in all upper case.
[Rules of engagement|http://wiki.sdn.sap.com/wiki/display/HOME/RulesofEngagement]
Edited by: Thomas Zloch on Jun 19, 2011 10:05 PM

There are actually 5 queries in this report now. From what I understand about a union query, I don't think it will work here because the data being returned in each of the queries is so different. I basically need to know how to make all the criteria for each individual to be displayed before proceeding to the next data set, which will include the same data as the first, but for the next employee, and so on. I need to basically create a repeating frame with each individual's respective data I guess, but every time I do, it tells me that it's referencing an invalid group.

Export button for crystalreportviewer control not showing ddl entries for..

we have a .net web application that was created using asp.net 1.1.
It displays crystal reports using the crystalreportviewer control.
Once the report is displayed, the user clicks on the export button and it looks just fine.
so everything is ok when it is run on the developer machine.
We start having issues when the application is deployed to a test server.
Here is the weird part: the site is running using asp.net 2.0 instead of 1.1. (not sure why, but they have their reasons)
First off, we tried creating the report and got the good ole "bobj is undefined". So I copied the crystalreportviewers folder into the site itself. I then updated the web.config the way it is described here (bottom):
http://blog.dragonsoft.us/2008/10/29/how-to-deploy-crystal-reports-2008-project-part-2/
That fixed the bobj, but now we have an issue with the export button.
when we click on the File Format drop down, the choices display at the bottom of the screen. So the user is unable to select a format. They are stuck using the preselcted "Crystal Reports (RPT)" entry.
A few other things visually...
-the main tool bar is white instead of being shaded grey
-the export dialog is white instead of being shaded grey
I'm wondering if we using the right version of the crystaldecisions dlls? We are using version 12.0.1100.0 of those dlls for this problem site. is it ok that the site is using asp.net 2.0? or does it HAVE to use 1.1?
bobj keeps haunting me in one way or the other.
Edited by: brownie04 on Jul 20, 2010 10:41 PM

The CR assemblies of version 12.0.1100.0 were specifically compiled to use framework 1.1. That is why you will also find those same assemblies of version 12.0.2000.0 - yup, you guessed it - compiled to use framework 2.x. Unfortunately, without an application configuration file, the latest compatible runtime version installed on the computer is loaded by default. So the app loads framework 2.0, but the CR assemblies are configured for framework 1.1
The way I see it, you have two options option;
1) install framework 1.1 on that computer. You will then have to create a configuration file that will direct your ap to load framework 1.1. For details on how to do this see the MS KBase [Configuring a COM Application for Side-By-Side Execution|http://msdn.microsoft.com/en-us/library/65y5x3xf(vs.71).aspx].
2) Compile your app to use framework 2.0 (e.g.; .NET 2005 or .NET 2008), thus loading CR assemblies of version 12.0.2000.0
Ludek
Follow us on Twitter http://twitter.com/SAPCRNetSup

Multiple entries for one album and tracks are diveded between entries

After adding all my music into iTunes I have some albums listed multiple times with one or two tracks listed in each one. How can I get all the tracks for that album listed all together? Also is there any way to import album art from another program. Windows media player has all the album art and iTunes is missing about 40 percent of them?

Well, I tried everything in that article and when all my albums are in cover flow view multiple albums covers show for that one album. When I type in the album name, it narrows down to 1 CD.
As far as not being able to retrieve album artwork, I just do a google image search. After I have saved the pictures I go to the info for any song in that album and add it to artwork.

Repeated Region: show dubble entries only one time

I want to make a recordset where all 'cities' are shown only one time, It should not be like
The Hague
The Hague
The Hague
Rotterdam
Rotterdam
Amsterdam
But:
The Hague
Rotterdam
Amsterdam
This is the recordset:
SELECT c_city FROM canteen
This is the repeated region:
<?php do { ?><?php echo $row_allCities['c_city']; ?><?php } while ($row_allCities = mysql_fetch_assoc($allCities)); ?>
Thankx for any further help!

Add a DISTINCT statement to your query.
SELECT DISTINCT c_city FROM canteen
Lawrence *Adobe Community Expert*
www.Cartweaver.com
Complete Shopping Cart Application for
Dreamweaver, available in ASP, PHP and CF
www.twitter.com/LawrenceCramer

Show all resources for one XSD schema

I am running Oracle 10.2.0.4 and today I was asked if it is possible to show all XML documents (resources) which are validated against a given, registered XSD schema .
The XML DB repository contains several registered XSD schemas and the XML files do have the 'noNamespaceSchemaLocation' annotation. I like to know if it is possible to list all XML files which contains the noNamespaceSchemaLocation annotation for a particular XSD schema.
regards,
René

You can also use the schema URL directly
SQL> select any_path from resource_view,user_xml_schemas
2 where extractValue(res,'/Resource/SchOID') = SCHEMA_ID
3 and schema_url = 'http://localhost:8080/source/schemas/poSource/xsd/purchaseOrder.xsd'
4 and rownum < 10;
ANY_PATH
/home/OE/PurchaseOrders/2002/Apr/AMCEWEN-20021009123336171PDT.xml
/home/OE/PurchaseOrders/2002/Apr/AMCEWEN-20021009123336271PDT.xml
/home/OE/PurchaseOrders/2002/Apr/EABEL-20021009123336251PDT.xml
/home/OE/PurchaseOrders/2002/Apr/PTUCKER-20021009123336191PDT.xml
/home/OE/PurchaseOrders/2002/Apr/PTUCKER-20021009123336291PDT.xml
/home/OE/PurchaseOrders/2002/Apr/SBELL-20021009123336231PDT.xml
/home/OE/PurchaseOrders/2002/Apr/SBELL-20021009123336331PDT.xml
/home/OE/PurchaseOrders/2002/Apr/SKING-20021009123336321PDT.xml
/home/OE/PurchaseOrders/2002/Apr/SMCCAIN-20021009123336151PDT.xml
9 rows selected.
SQL>

OEM showing 3 entries for one host

Similar Messages

Maybe you are looking for