OEM V2.2/will not discover database
Hello,
I am using oracle 8i database in windows nt environment. When in OEM, the discovery services will see the node that database is loaded and running on, but will not discover the database. I can manually configure the database, but the config is using the wrong instance (orcl) instead of webar. I have checked tnsnames.ora, sql.net, listener.ora and can find nothing wrong. I can connect to the database no problem. OEM is the only software that has a problem. Is there a configuration file for the Intelligent Agent? Am I missing something else?
Thanks for the help.
Sue Misslbeck
I am not getting any error at all. It will discover the node (ora1) where the database resides, however, it will not show a database folder for this node.
Should I be getting an error message?
Thanks.
Sue
Similar Messages
-
My iPad will not discover any blue tooth devices
My iPad will not discover any blue tooth devices. The Bluetooth is turned on but it will only discover a Blackberry phone and not my other iPad or 5s and 4s or a QED receiver.
To connect the devices over bluetooth, just enable Bluetooth in Settings app on both devices.
Bluetooth is activated automatically when Wi-Fi connectivity is not available or does not work properly.
Note: Initial Bluetooth connection takes around 15 seconds to activate.
This is the directions for the app. And all the reviews seem to just go right on through! I have a love hate relationship with my apples!!
Thank you so much by the way for trying to help me! -
My iPhone 4S will not discover any bluetooth devices since I updated to iOS7.
My iPhone 4S will not discover any bluetooth devices since I updated to iOS7. I have restored the phone to factory settings etc.. still not working! I have tried this on numerous devices, e.g. handsfree in car, ipad. Please help
Hello there, DonnaLou.
The following Knowledge Base article provides some pretty extensive steps for troubleshooting Bluetooth issues:
iOS: How to troubleshoot Bluetooth connections
http://support.apple.com/kb/TS4562
If you feel you have gone through all of these steps already, the article recoommends:
If the issue persists after restoring your iOS device in iTunes, contact Apple for support and service options.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro. -
4S iPhone will not discover WiFi network
My phone will not discover a WiFi network
Wow, same problem here after I upgraded to iOS6. My bluetooth and wifi both stopped working completely. I called tech support who told me i wasn't covered and acted like they had never heard of this happening and tried to sell me a $100 dollar warranty to get it fixed. I found these discussion forums and saw how many people were having the same problem and called tech support back to tell them I didn't appreciate the guy acting like he had never heard of this.
Turns out, I am completely covered under Apple care and she set me up with an appointment to get a new phone tomorrow, no charge. Now I see all these people who got replacements and are still having the same problem. Just when I thought I had everything fixed. Guess I'll just have to keep my fingers crossed. -
Bought the Iphone 6 2 days ago. My mac pro finds the phone on bluetooth but phone will not discover ANY bluetooth divices. Have hard reset the phone and restarted as well. nothing. Any suggestions or issues. This is the first apple phone I have owned. Am not very happy that Bluetooth would present a problem.
I can't help with the other devices but note that an iPhone will not pair via Bluetooth to a computer (Mac or Windows) except for personal hotspot and then only if your cellular plan supports it. https://discussions.apple.com/docs/DOC-7722
If you are attempting to use Handoff/Continuity, that does involve Bluetooth but the devices are NOT paired; Bluetooth just needs to be on and the devices in range of each other. The following may help with Handoff/Continuity issues: http://support.apple.com/kb/TS5458 -
Minimac will not discover ipad iphone on wifi.bluetooth on keynote
I am tryying to link my minimac with iphine or ipad to present keynote presentations. minimac will not discover the devices.
hi thx.
I am trying to connect keynote presentation to new remote function in keynote on minimac and i pad or iphone 5s. i am struggling over wi-fi as well to connect so i can present the keynote presentation on my mini mac. they are not discovering each other.
i am on same wifi network.
any ideas? -
OEM10g will not discover 9iRAC - Fix included.
Because the change in cluster software from 10g to 9i, oem will not find 9i rac databases. It will discover the database, but it will mark it as an Instance on each machine rather than marking it as a cluster db and finding the instances as well.
You must manually edit your targets.xml file for the 3 pieces it needs cluster, cluster database, and cluster instance.
(remove the target host line and database that it found)
<Target TYPE="host" NAME="machinename">
<CompositeMembership>
<MemberOf TYPE="cluster" NAME="mycluster" ASSOCIATION="cluster_member"/>
</CompositeMembership>
</Target>
<Target TYPE="rac_database" NAME="RAPDB">
<Property NAME="OracleHome" VALUE="/opt/oracle/product/server32/9.2.0"/>
<Property NAME="UserName" VALUE="dbsnmp"/>
<Property NAME="password" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="machinename"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="RAPDB1"/>
<Property NAME="ServiceName" VALUE="RAPDB"/>
<Property NAME="ClusterName" VALUE="mycluster"/>
</Target>
<Target TYPE="oracle_database" NAME="RAPDB_RAPDB1">
<Property NAME="OracleHome" VALUE="/opt/app/oracle/product/server32/9.2.0"/>
<Property NAME="UserName" VALUE="dbsnmp"/>
<Property NAME="password" VALUE="dbsnmp" ENCRYPTED="FALSE"/>
<Property NAME="MachineName" VALUE="machinename"/>
<Property NAME="Port" VALUE="1521"/>
<Property NAME="SID" VALUE="RAPDB1"/>
<Property NAME="ServiceName" VALUE="RAPDB"/>
<Property NAME="Role" VALUE="SYSDBA"/>
<CompositeMembership>
<MemberOf TYPE="rac_database" NAME="RAPDB" ASSOCIATION="cluster_member"/>
</CompositeMembership>
</Target>Try to Reset (Reboot) your phone. Press and hold both the Sleep/Wake button and the Home button for at least ten seconds, until the Apple logo appears.
-
Oem auto discovery does not discover
Hello, DBAers; RHEL 5 x64, Oracle Enterprise Manager 12.1.0.3 - trying to discover an unmanaged host using auto discovery and following the instructions spelled out here
http://docs.oracle.com/cd/E24628_01/doc.121/e24473/discovery.htm#EMADM13119
and the auto discovery is not discovering.
I can "ssh <usrname>@<hostname>" and connect to the unmanaged target from the machine running the management server and ping the target server from same, so it does not appear to be a firewall issue. But OEM cannot see it through auto-discovery. Do any of you have any thoughts?
Humbly,To be able to run auto-discovery,
the Sudo Privilege Delegation must be set on the Management Agent host that will perform the scan. The named credential that will be used must be configured to run as root.
Because it used nmap (port scanner). Have you checked that sudo privilege delegation is set? -
Sql server service will not start after server reboot:
2009-08-13 14:15:43.94 spid7s SQL Trace ID 1 was started by login "sa".
2009-08-13 14:15:43.97 spid7s Starting up database 'mssqlsystemresource'.
2009-08-13 14:15:43.97 spid7s The resource database build version is 10.00.1600. This is an informational message only. No user action is required.
2009-08-13 14:15:44.30 Server A self-generated certificate was successfully loaded for encryption.
2009-08-13 14:15:44.30 spid7s Server name is 'WIN-37R9WFWAJIB\MSDB1'. This is an informational message only. No user action is required.
2009-08-13 14:15:44.32 spid10s Starting up database 'model'.
2009-08-13 14:15:44.32 Server Server is listening on [ 'any' <ipv6> 49167].
2009-08-13 14:15:44.33 Server Server is listening on [ 'any' <ipv4> 49167].
2009-08-13 14:15:44.33 Server Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\MSDB1 ].
2009-08-13 14:15:44.33 Server Server named pipe provider is ready to accept connection on [ \\.\pipe\sql\query ].
2009-08-13 14:15:44.35 spid10s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2009-08-13 14:15:44.38 Server Server is listening on [ ::1 <ipv6> 49168].
2009-08-13 14:15:44.38 Server Server is listening on [ 127.0.0.1 <ipv4> 49168].
2009-08-13 14:15:44.38 Server Dedicated admin connection support was established for listening locally on port 49168.
2009-08-13 14:15:44.39 spid10s Error: 927, Severity: 14, State: 2.
2009-08-13 14:15:44.39 spid10s Database 'model' cannot be opened. It is in the middle of a restore.
2009-08-13 14:15:44.49 spid10s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in the event log that may indicate why the tempdb files could not be initialized.
2009-08-13 14:15:44.50 spid10s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informa
there is plenty of room on the server, so i dont think its a disk space issue. i am able to start the service as such:
C:\Users\Administrator>net start MSSQL$MSDB1 /c /m /T3608
The SQL Server (MSDB1) service is starting.
The SQL Server (MSDB1) service was started successfully
sqlcmd -e
1> select name, status from sysdatabases;
2> go
select name, status from sysdatabases;
name
status
master
65544
tempdb
65544
model
65568
msdb
1073807368
SS_DBA_Dashboard
1073807368
(5 rows affected)
model is in RESTORING state and I dont know how to fix it. I am running simple backups, so I have a somewhat recent backup of model.bak but when I attempt to restore it I get an error:
1> restore database model
2> go
restore database model
Msg 3112, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
Cannot restore any database other than master when the server is in single user
mode.
Msg 3013, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 1
RESTORE DATABASE is terminating abnormally.
other forums suggest manually updating the status column but i dont know if my syntax is wrong or it just cant be done in sql server 2008:
1> begin transaction
2> update sysdatabases set status=16 where name='model'
3> ;
4> go
begin transaction
update sysdatabases set status=16 where name='model'
Msg 4406, Level 16, State 1, Server WIN-37R9WFWAJIB\MSDB1, Line 2
Update or insert of view or function 'sysdatabases' failed because it contains a
derived or constant field.
1>
yet another forum suggested taking a cleanly shut down model.mdf and model.ldf from another sql server 2008 instance and placing those in the data directory while moving the 'restoring' ones to a backup location. this didnt work either. any help is appreciated im new to sql server and this is very frustrating! thanks in advance!I have the same issue on SQL Server 2008R2, after a server reboot, but none of the NET START commands or command line attempts are successful to start the Service.
NET START command results in "Access Denied" "System Error 5" and the Command line attempts result in
Server Error: 17058, Severity: 16, State: 1.
Server initerrlog: Could not open error log file ''.
Any help?
SQL Error log file:
2011-03-29 16:50:49.40 Server (c) Microsoft Corporation.
2011-03-29 16:50:49.40 Server All rights reserved.
2011-03-29 16:50:49.40 Server Server process ID is 7292.
2011-03-29 16:50:49.40 Server System Manufacturer: 'Dell Inc.', System Model: 'PowerEdge T710'.
2011-03-29 16:50:49.40 Server Authentication mode is MIXED.
2011-03-29 16:50:49.40 Server Logging SQL Server messages in file 'E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG'.
2011-03-29 16:50:49.40 Server This instance of SQL Server last reported using a process ID of 7448 at 3/29/2011 4:30:06 PM (local) 3/29/2011 8:30:06 PM (UTC). This is an informational message only; no user action is required.
2011-03-29 16:50:49.40 Server Registry startup parameters:
-d E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\master.mdf
-e E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\Log\ERRORLOG
-l E:\MSSQL\MSSQL10_50.MSSQLSERVER\MSSQL\DATA\mastlog.ldf
-T 4616
2011-03-29 16:50:49.42 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2011-03-29 16:50:49.42 Server Detected 24 CPUs. This is an informational message; no user action is required.
2011-03-29 16:50:49.84 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2011-03-29 16:50:49.84 Server Lock partitioning is enabled. This is an informational message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 0: CPU mask: 0x0000000000fff000:0 Active CPU mask: 0x0000000000fff000:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.86 Server Node configuration: node 1: CPU mask: 0x0000000000000fff:0 Active CPU mask: 0x0000000000000fff:0. This message provides a description of the NUMA configuration for this computer. This is an informational
message only. No user action is required.
2011-03-29 16:50:49.89 spid9s Starting up database 'master'.
2011-03-29 16:50:49.95 spid9s CHECKDB for database 'master' finished without errors on 2011-03-18 08:46:34.257 (local time). This is an informational message only; no user action is required.
2011-03-29 16:50:49.95 spid9s FILESTREAM: effective level = 0, configured level = 0, file system access share name = 'MSSQLSERVER'.
2011-03-29 16:50:49.97 spid9s SQL Trace ID 1 was started by login "sa".
2011-03-29 16:50:49.97 spid9s Starting up database 'mssqlsystemresource'.
2011-03-29 16:50:49.99 spid9s The resource database build version is 10.50.1600. This is an informational message only. No user action is required.
2011-03-29 16:50:50.20 spid13s Starting up database 'model'.
2011-03-29 16:50:50.20 spid9s Server name is 'XXXX'. This is an informational message only. No user action is required.
2011-03-29 16:50:50.21 Server The certificate [Cert Hash(sha1) "C41DC20703F049763778AC2842C3C8A3A2C6EED4"] was successfully loaded for encryption.
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv6> 1433].
2011-03-29 16:50:50.21 Server Server is listening on [ 'any' <ipv4> 1433].
2011-03-29 16:50:50.21 Server Server local connection provider is ready to accept connection on [
\\.\pipe\SQLLocal\MSSQLSERVER ].
2011-03-29 16:50:50.21 Server Server named pipe provider is ready to accept connection on [
\\.\pipe\sql\query ].
2011-03-29 16:50:50.21 Server Server is listening on [ ::1 <ipv6> 1434].
2011-03-29 16:50:50.21 spid13s The database 'model' is marked RESTORING and is in a state that does not allow recovery to be run.
2011-03-29 16:50:50.21 Server Server is listening on [ 127.0.0.1 <ipv4> 1434].
2011-03-29 16:50:50.21 spid13s Error: 927, Severity: 14, State: 2.
2011-03-29 16:50:50.21 spid13s Database 'model' cannot be opened. It is in the middle of a restore.
2011-03-29 16:50:50.21 Server Dedicated admin connection support was established for listening locally on port 1434.
2011-03-29 16:50:50.22 spid13s Could not create tempdb. You may not have enough disk space available. Free additional disk space by deleting other files on the tempdb drive and then restart SQL Server. Check for additional errors in
the event log that may indicate why the tempdb files could not be initialized.
2011-03-29 16:50:50.22 spid13s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required. -
Oem web page will not display after O/S dst patch
Hello,
The Grid web page will not display after we DST patch for the o/s.
All below start fine without any errors:
emctl start oms
emctl start iasconsole
opmnctl startall
emctl start agent
The Grid web page is not displaying. What might happened after the o/s dst patch that might cause this? Our GRID is 10204 with a 10104 repository. The 10104 has not yet been dst patch.
What logs should I be looking at to figure why the web page is not displaying? Thank you.Provide the output of these comands:
$OMS_HOME/bin/emctl status oms
$OMS_HOME/opmn/bin/opmnctl status
$AGENT_HOME/bin/emctl status agent
$DATABASE_HOME/bin/sqlplus "/ as sysdba" << EOF
SELECT STATUS FROM V$INSTANCE;
EOF
$DATABASE_HOME/bin/lsnrctl status LISTENER_NAME
Regards -
OEM-Node found but not the database
I have OEM installed on the local machine (NT) that is connected to 2 remote database servers (solaris). Each database server has a database sit on it (8.1.6). Although OEM was able to find both remote servers, only one database was registered with OEM. Could someone provide me with some solutions about how to have both databases registered with OEM?
Thanks.
MorrisHi,
check if the Agent is started on the remote machine that You don't see in the console.
Try to start the remot agent after the DB startup and the refresh the node via the console.
If not, register the DB manually.
Bye Max
null -
Brand new iPhone 4s; will not discover GoGroove Flexsmart x2
Just pulled my new iPhone 4s out of the box, attempted to pair it with my Flexsmart x2. No dice. The iPhone will discover other devices, but not the X2, and the X2 discovered my iPhone 3GS just fine 10 minutes prior. The X2 pairs with other devices successfully, so does the iPhone. Running iOS 7.1 (11D167) and running firmware 5.2.00
Yes, I have turned everything off and back on again.
Yes, I have updated to latest iOS.
Yes, I have tried turning Siri off, turning cellular off, etc.
Any assistance would be appreciated.Don't bother with imanog's suggestion if you have a top-loading washer.
Jeez, it's like Apple doesn't even care about anyone who uses a washing machine more than two years old.
Just because you use front-loaders doesn't mean everyone does. It's like they're deliberately trying to spite a large number of users, just because our machines aren't the newest and most efficient!
And before you ask, don't even get me started on the dirty dishes piling up in my sink. Come on, Apple!! -
SCOM will not discover a RedHat Server.
While trying to connect to a RedHat linux server via SCOM I receive the following error:
There were no computers that met the specified discovery criteria, or the account that you specified does not have privlages on the computers you are trying to discover. Verify that:
-The computers exists within the specified directory criteria.
-The account that you have specified exists on the computers you are trying to discover.
-The hostnames or IPs entered within the specified directory criteria can be resolved through DNS.
In our attempt to troubleshoot we have:
Restarted each VM (Who knows.. It works sometimes.)
Pinged the RedHat server from the VM running SCOM
Connected to the RedHat server via SSH from the server running SCOM.
We were able to "su -" successfully.
Performed a DNS lookup from the server running SCOM.
We have tried discovery with and without SSH Discovery.
Discovery using both root and non root users
Discovery using both IP and domain name.
All firewalls have been disabled for testing purposes.
selinux has also been disabled.
Any help would be appreciated.It might take quite some time before all the disocveries kick in and start finding the actual objects to monitor...
You should try to see if you are able to query WSman from the Windows box just like OpsMgr will do, for example by checking what the SCX_OperatingSystem class returns with a command like the following one (don't copy/paste it but rather TYPE it - sometimes
HTML encoding and fonts mess it up):
winrm enumerate
http://schemas.microsoft.com/wbem/wscim/1/cim-schema/2/SCX_OperatingSystem?__cimnamespace=root/scx -username:yourusername -password:yourpassword -r:https://www.muscetta.com:1270/wsman -auth:basic -skipCACheck -encoding:UTF-8
I had written a few of those steps back in Release Candidate time on my blog at
http://www.muscetta.com/2009/03/27/cross-platform-in-opsmgr-2007-r2-release-candidate/ -
Not discover database in management server
Hi,
I install ORACLE 9.2.0.4.0 in a linux FEDORA CORE 1.
I install with the option SOFTWARE ONLY and then create an instance BOLSAFE with the assistant.
Then I install the management server, create a OEMREP, start the intelligent agent but when I open the console, the agent discovers only the OEMREP instance, and not the BOLSAFE instance.
If I enter in local mode it work fine and in ISQLPLUS work fine too.
Any help will be highly appreciated
ThaksHello,
Does your Resource Capacity job (Reporting (Resources Capacity Range Sync)) still run successfully each day? What settings do you have set on this? This is set on the Additional Server Settings in the Resource Capacity Settings section (PWA Server
Setting > Additional Server Settings). How many months ahead and month behind have you got set?
If the job is not running, change the scheduled time for the job by 5 minutes or so on the Additional Server Settings page then wait for that time to pass and check the queue for the successful job. Once the job is successful that view should contain data
for the time range set (months behind / ahead).
Paul
Paul Mather | Twitter |
http://pwmather.wordpress.com | CPS -
SQL Sever 2012 will not install - Database engine or scenario.exe failure
Hello everyone!
I have been trying for days to get MS SQL Server 2012 SP1 installed on my 1and1 VPS and every installation attempt fails. It will hang at the SqlEngineConfigAction_install_startup_Cpu64 for a few minutes and then give me a ScenarioEngine.exe - Application
Error message. Once I click ok, the entire installation bombs out. Error logs state that the installation never occurred.
The server specs from 1and1 are:
XXL Package
6 vcores
500GB Hard Drive Space
6GB Memory
Windows 2008 R2 DataCenter SP1
All help is greatly appreciated!!
BradYes, sorry. I should have done that before...See below for summary.txt file.
Overall summary:
Final result: Passed
Exit code (Decimal): 0
Start time: 2015-03-24 20:49:31
End time: 2015-03-24 20:50:16
Requested action: RunRules
Machine Properties:
Machine name: S18267699
Machine processor count: 6
OS version: Windows Server 2008 R2
OS service pack: Service Pack 1
OS region: United States
OS language: English (United States)
OS architecture: x64
Process architecture: 64 Bit
OS clustered: No
Product features discovered:
Product Instance Instance ID Feature
Language Edition Version Clustered
Package properties:
Description: Microsoft SQL Server 2012
ProductName: SQL Server 2012
Type: RTM
Version: 11
SPLevel: 0
Installation location: C:\Users\Administrator\Desktop\MSSQL2012\x64\setup\
Installation edition: Evaluation
User Input Settings:
ACTION: RunRules
CONFIGURATIONFILE:
ENU: true
FEATURES:
HELP: false
IACCEPTSQLSERVERLICENSETERMS: false
INDICATEPROGRESS: false
INSTANCENAME: <empty>
PID: *****
QUIET: false
QUIETSIMPLE: false
RULES: SCCCheckRules
UIMODE: Normal
X86: false
Configuration file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150324_204928\ConfigurationFile.ini
Rules with failures:
Global rules:
There are no scenario-specific rules.
Rules report file: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log\20150324_204928\SystemConfigurationCheck_Report.htm
Brad
Maybe you are looking for
-
Multiple preferred languages in my Profile (or uns...
A great feature in ones personal "Profile" would be to allow for adding languages. If needed, one could still be "preferred" (and the rest alternatives). I understand that the extra fields (in your database) and extra programming effort can be a rea
-
Zero debit for non deductable account in A\P invoice in Canada loc
Hi We set the new tax code with rate 13% and non deduction 61.5% . So when we issue the A/P invoice with net amount 1250 $ I expect to see in JE (I was able to create it in demo Canadian database) : 1.Credit vendor 1412.50 2.Debit expense 1250 3.Debi
-
Is there a way to enter a link & have it go to a specific spot on the page?
hi, i have a long list of items and i want to have a directory at the top of the page.. then a person can click on an item and it takes them to the middle of the page or so... then a link that says "top of page" underneath the items.. is this possibl
-
I've just noticed a glitch in Firefox when I go to Tools >> Options >> Content >> Fonts & Colors >> Advanced, and set my own font and font size, and force websites to use them. For some reason, this makes websites' navigation buttons fail to show pro
-
Hello! I can create folder in Presentation catalog, but then I don't see them in Answers?? But until yesterday I was able to manage folders normally. Any idea? Thanks