Oem version p6n platinum wont load realtek lan driver

Hi I got an oem version of the p6n sli platinum off ebay new. It seems to work well, but it refuses to load the driver for the lan. ran the nvidia driver utility, but no dice. Also wont load the SM Bus driver. I dont know what that is. More importantly Id just like to get the onboard nic to work. Annoying every time I boot it goes through the wizards for the two unsuccessfully. Id like to have maybe tried to flash the BIOS, but I dont have a floppy drive. Any help is appreciated
                                                                       Johnny Ackerman

Quote
oem version of the p6n sli platinum
Are you sure it is an OEM-Board?  Look for the following information an post it here:
--> Model Number (Printed on the board itself between PCI & PCI-E Slots), MS-7350VP means OEM in your case, MS-7350 is the retail version
--> BIOS Version (should be displayed on the POST Screen (look for A7350I?? V?.?? ), post the full BIOS ID:
Quote
off ebay new
OEM Boards are build for companies like Medion, FSP, HP etc. to be used as part of complete systems sold under the specfic brand name.  OEM Boards are not sold on the open market.  That means either your board is not an OEM board or it is not necessarely new.
Quote
Id like to have maybe tried to flash the BIOS, but I dont have a floppy drive. Any help is appreciated
Note: If you really have an OEM board, do not use an MSI Retail BIOS. Read here:
https://forum-en.msi.com/index.php?topic=110544.0

Similar Messages

  • Latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

    latest version of Itunes wont load.. Keep getting message Error 7 - windows error 126???

    Any update on this???? Still having the same problem.

  • Satellite Pro L500 - Can't install Realtek LAN driver

    Hi All,
    I have recovered a Satellite Pro L500 Windows 7 pro with disc created from notebook, but now can't install a Realtek LAN driver for the notebook.
    The software driver installer dosn't seem to run correctly all the time, have tried several times to install, with only once a realtek "repair" option becoming available.
    When I did manage to install driver I got a error "device failed to start". after recovery I also had problems with a "PCL simple communications controller driver",
    which seems to have been a Intel MEI according to the VEN, DEV info displayed in systems info.
    Are these problems related and how do I Install the required driver in a automated system if the system won't detect the hardware correctly?

    Have downloaded from many sources the correct driver, but the motherboard or the OS is not discovering the network adaptor so even if the driver is installed the divice is not recognised as being there(physically installed). when installing the driver software i get the error from the realtek installer "Realtek network controller was not found. If in deep sleep mode is enabled please plug the cable". have no idea what or how deep slee is enabled and have reset bios settings to default and have reset cmos.

  • MY K8N NEO4 Platinum wont load windows

    hey
    well i just got the MSI K8N NEO4 PLATINUM and it will turn on. It will get to the Windows XP loading screen but then when its going to actually load windows it restarts.
    why is this?
    thanks

    Probably because something isn't right?
    More info would be helpfull, my cristalball broke yesterday

  • ITunes update wont load. asking for Drive F. There is no drive F.

    Tried to load iTunes update. I proceeds and gives a window that says that there is no room on Drive F. I do not have a Drive F. iTunes should load to the C drive.

    Although you're getting a different error message, I'd try the following user tip with that:
    "Invalid Drive X:\" install errors

  • K9A2 CF LAN Driver noob question

    I uninstalled my old Realtek LAN driver and want to install the new one http://www.msi.com/index.php?func=driverfile&dno=2423&i=0 but there is no set-up file.  Do I have to install it through the Device Manager, or is the file incomplete?
    Thanks.

    Unzip it to your desktop and then point the Device Manager to the folder, then it should install, but make sure you need the 32 or 64bit Windows version.
    Why on earth did you uninstall the old lan driver? Any problems with it?
    Lan drivers normally contain very small fixes and hardly ever need updates.

  • Satelitte C55 B5298 Network lan driver problem

    I got a problem, i got SATELLITE C55-B5298 with windows 8.1 is new. but the problem is a lost the ethernet adapter, I looked for this driver in sopport page but it doesn´t work. 
    what can i do, I need to use Lan no Wifi.

    Satellite C55-B5298
    Downloads here.
       RealTek LAN Driver
    "Doesn't work" doesn't tell us anything. There's a message when you install it?
    What shows in Device Manager (devmgmt.msc)? Attach a picture like this.
    -Jerry

  • MSI P6N Platinum OEM, BIOS update needed

    Hi, I got an p6n platinum oem board, which looks different to the original board by msi. There are no heatpipes inside and the e-sata is missing and it looks like the p6n sli (without platinum). The BIOS ID: MSI P6N SLI Platinum A7350NM7 V1.08 110107.
    Where can I get the BIOS update/is it possible to flash with original msi BIOS update?

    We can not offer support for OEM products. Support is only available for MSI Retail products.
    Remember, there may be slight design differences between the OEM version and the retail version. The retail bios may brick or distabilize the OEM version.
    locked.

  • New version wont load..Message Error 7 - Windows error 126

    new version wont load..Message Error 7 - Windows error 126

    Any update on this???? Still having the same problem.

  • Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Ive just updated my version of itunes and now it wont load the itunes store? Anyone know why? Worried about losing my library if i start trying to download again.

    Hey NJ85,
    Thanks for the question. If you are having issues connecting to the iTunes Store, this article may help:
    Can't connect to the iTunes Store
    http://support.apple.com/kb/TS1368
    Thanks,
    Matt M.

  • Have Vista, loaded new version of iTunesn now have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version or is there a Dep fix

    Have old PC with Vista, loaded new version of iTune now I have DEP issue and iTunes wont load. Is there a way to download on old compatable 9.0 version of iTunes or is there a workable Dep fix?

    You'll get a variety of earlier versions of iTunes here: Old iTunes for Mac

  • K8N Neo2 Platinum - Realtek LAN Missing...

    Good morning Ladies & Gents,
    Hope anybody out there can help me, I recently had some major issues with my K8N Ne02 Platinum mobo,didn't want to switch on or anything,just sat there with the stupid power LED blinking at me. After browsing the forums I saw some other people with the same issue, and long story short, I swopped it out and got my replacement mobo yesterday.
    Connected everything up again and it works great! Except...the Realtek LAN is missing...
    I thought it was just disabled by default in the BIOS, but when I looked in the BIOS I didn't see any setting for it! Nothing...the only LAN related option in the BIOS is the NVLan thingy...I got the board with BIOS rev 1.8, didn't want to flash the BIOS unneccesarily, but do you guys think a BIOS update will turn on the MINA (Missing in Non-action) NIC for me?
    Thanks alot for your help.

    Why do you want the realtek port anyway , the nvlan is better .
    Anyway , what I think has happend is the the nvlan is flashed with the nvguid/mac address that belong to
    the realtek PHY .
    To correct this you can reflash bios with the /nvmac parameter and simply add +1 to the latest octet.
    Eg. you have 00 01 29 D2 2C 5B  on the nvlan port
    There may be a possibility that this mac address is burned into the realtek phy (btw it's no way to know expect from the boards sticker
    and the sticker shows the Realtek mac , and the nvidia mac is this address + 1.
    E.g sticker say : 00 01 29 D2 2C 5B
    00 01 29 D2 2C 5B is burned in Realtek PHY chip
    00 01 29 D2 2C 5C is soft programmed with bios to nvlan PHY.
    If nvlan is using the realteks mac address the realtek lan will never get initialized (so it will not be visible even from bios).
    This have been an issue with many Neo1/Neo2 boards during the last 1/2 years .
    nvmac can also be changed in modified bioses or by unhiding options with shift+F2 then Alt+F3
    In "Integrated Peripherals"
    MAC Address Input (type in your new MAC Address here without dashes) ,like i.e 000129D22C5C
    Dont ESC from this input as it erase old mac , if opened you need to key in a complete (new/existing) mac address.

  • Can i load an oem version of windows on my macbook pro?

    Is there any prohibition from using an OEM version of Windows OS to run on Parallels instead of a full retail version, for installation on my Macbook Pro?

    There is one OEM type verison that system builders use, that can be used to install on a Mac via Parallels, VMFusion or the free VirtualBox.
    The one from your old Dell or Compaq type PC that came with the machine isn't it, that's a vendor specific OEM version.
    Of course the retail disks work too.

  • P6N Platinum, Problem with SLI

    Hi
    I'm newbie...
    I have problem with SLI, maybe Drivers isn't good for Sli...
    My Specs:
    Core 2 Duo 4300
    Zalman 9700 NT
    Msi P6n Platinum 
    Mem 2x1GB OCZ Reaper HPC PC6400,  DDR 2 800
    XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
    Evga Geforce 8600GT (normal) Core 540/1400
    PSU Corsair 620 HX
    Maxtor 160gb SATAII DiamondMAX
    I just install the driver Forceware (Version 163.63_whql) and i cannot using SLI.
    Later I just uninstall my driver 163.63 and Driver Cleaner for uninstall all driver nvidia, (ALL CLEAN).
    So I just install the driver Forceware (Version 163.71_whql) and Finish Installer and restart my system.
    Boot Windows XP, and Show that i have mode SLI CAPABLE.
    I just enable SLI and apply, suddenly Shut down my computer and turn on again, boot post and loading windows xp.
    It's no activate SLI yet 
    What is wrong?
    My system:
    *** NO OVERCLOCKER, ALL DEFAULT
    *** No UPDATE BIOS.
    *** VERY STABLE, but no working SLI...
    I have two card, is same model 8600 GT.. but different core and memory.
    First PCI-ex  is XFX Geforce 8600GT XXX
    Second PCI-ex is Evga Geforce 8600GT
    Question:
    Which is the best drivers for capable SLI?
    Help, for Enable SLI...
    Thank you

    Quote from: Abraham55 on 11-October-07, 01:11:46
    I did, i put SLI Switch Card : SLI MODE, 8x + 8x
    I can see two video cards, (each video cards have 8x)
    So when i want enable SLI MODE, and apply, suddenly SHUT DOWN MY COMPUTER..
    Make sure power cables are connected to the each one.(if they have).
    "XFX Geforce 8600GT XXX (Special Overclocker) Core 620/1600
    Evga Geforce 8600GT (normal) Core 540/1400"
    If no change try with 2x matched VGAs...

  • P6N Platinum: audio problem! [SOOOOLVED! YES!]

    Hello.
    I've recently got a P6N Platinum, Q6600, 4GB Corsair 800MHz DDR2 and a GT8800. I started out with XP64, but for various reasons I'm switching to good ol' XP32 now. Formatted and installed it today. Everything worked smoothly in XP64, but now that I've installed XP32 the audio won't work. I've tried all sorts of different versions of the Realtek HD Audio drivers, but nothing seems to work. I read somewhere that some guy had success installing (in this exact order, with reboots inbetween) the Chipset driver, S-ATA raider driver then the Audio driver straight from the original MSI CD that came with the MB, so I even formatted again, reinstalled XP32 and tried installing the drivers in this order with reboots between each one; nothing. What worries me is that nothing even shows up in Device Manager, the only thing I got there with a "question mark" is a PCI Device. I have no idea what device this is though since the only "PCI Device" I got connected is my PCI-E graphic card which already has drivers. I've tried the CNet drivers from the "Popular Issues and Solutions" thread too, didn't work at all. I've tried pretty much everything I can think of, nothing. Even tried forcefeeding a new device through Add Hardware.. then using the Realtek drivers, but I got "Device can't start". BIOS is reset, tried both Default Settings and Optimized Defaults. Tried disabling and re-enabling the HD Audio Controller in BIOS Intergrated Peripherals. Any suggestions would be LOVED, because this is getting frustrating.
    Edit: Could also be worth nothing I am using XP SP3, and I got no Microsoft HD Audio-driver under my Sound devices in Device Manager.
    Thanks in advance.

    OH MY GOD, I finally found out what the hell was up. The PCI Device that was showing up yellow was the actual Windows HD Audio thing. Or, the "UUA Fix". I think what happens is that this won't install properly on XP SP3, so I somehow, somewhere, found a UAA fix for SP3, did a "Reinstall drivers" on the PCI Device and picked the path for it and suddenly the Realtek drivers just popped right into track without any problems. Instantly.
    http://www.9covers.com/files/HDA%20AddOn%20For%20XP%20SP3.zip
    Try this if you are having problems installing any HD Audio drivers in XP SP3. Woho.

Maybe you are looking for

  • Poor Quality After Render

    Hello. I have been having some problems with Premiere Pro CC after the 7.2 update. A new one has arisen when i render a video. Normally the quality would improve and i can see it in the preview window. But now after i render a video the quality is so

  • How to set the margin of a jtextfield when using standard lineborder

    Hi, I want to give my jtextfield a custom inset. The problem is that I also use a lineborder which controls the inset, thus when I try to the setMargin method, it doesn't work. Can anyone tell me how to do this? Much thanks Hugo Hendriks

  • Syncing Music between iMac (Mountain Lion) and IPad (ios6) with iTunes.

      Why are comments and ratings of music titles not synched? Or asked differently: Why does Music on iPad does not have rating or coment functionality?

  • Why can't I update LR through CC

    Everytime I get a notice that there is an update for LR I look at the app in my CC destop window and it says up tp date. If I hit the update link it takes me to a web page were I have to do the update. If LR 5 is part of CC I want CC to tell me there

  • Archiving FI Park Document

    Hi All, Can please advice how to archive FI park document? Does it need to be cleared first so that it can be archived? Thanks, CW