OEM windows 7 professional 64bit - HP ProBook 4530s

I have try to download the windows from www.microsoft.com/en-us/software-recovery
After entering my product key from my laptop with preinstaled windows, the site gives me this message:
"Unsupported Product
The product key you entered appears to be for software that was pre-installed on a device. Please contact the device manufacturer for software recovery options."
I have try to surch the hp support site to find any leagal OEM Windows, but nothing unfortunately.
Please can somebody help me with this issue?
Kind regrads

Padalov wrote:
How to order this recovery disc from HP
Try the first link..
Obtaining HP Recovery Discs or an HP USB Recovery Drive
Read this before ordering your Recovery Discs! (US and Canada Only)
Creating Recovery Discs or Saving a Recovery Image to a CD/DVD/USB Flash Drive (Windows 7)
I am a Volunteer to help others on here-not a HP employee.
Replies aren't online 24/7 because of Time Zone differences.
Remember in this Day and Age of Computing the Internet is Knowledge at your fingertips if you choose understand it. -2015-

Similar Messages

Can I use an OEM Windows 7 64bit with Boot Camp?

I would like to put Windows 7 Home Premium 64 bit on my Mountain Lion 10.8.3 system using Boot Camp 5. Can I use an OEM version of Windows or not?

You can, but it's illegal. A OEM version is designed to be installed on a new computer, not on a computer with an existing operating system, so you can install Windows from there but you should know that's illegal, so Apple doesn't support it. To do this legally, you have to get a full Windows 7 disc version and use it to install Windows.
If you need the steps to install Windows on the MacBook, read > http://manuals.info.apple.com/en_US/boot_camp_install-setup_10.8.pdf

Screen does not turn on after sleep - ProBook 4530s - Windows 8.1 (64bit)

Hi everyone,
Not sure if this had to be posted in notebook display and video section, or laptop lockups, freezes and hangs. Anyway, I have a problem, where everything is fine with the computer, it's running smoothly, but whenever I make it go to sleep, after it does it instantly, the signals are of a regular laptop sleep - power buton flashing, no other signs of computer being on.
However, the problem appears when turning the computer back on after sleep. After pressing the power button, the computer straight away starts working - you can hear the fan turned on, etc, just that pretty much nothing changes with the screen. Sometimes, with some particular light directed towards the screen, you can even see, that the computer is on (seeing the clock on the display), just like the brightness was set down to 2% or something. And there is nothing that helps from what I have tried to do (tried reinstalling both AMD drivers and Intel HD drivers). I researched this problem extensively but could not find a solution, however, as I have noticed that this is quite an old problem (assuming from the date of the posts this problem first showed up), there might be a solution for it, to which I just have not noticed the answer?
If anyone can help me, please do, the sleep function is essential and extra important function when living on campus at university, I just cannot operate like this.
Hopefully someone will know, thank you in advance.
Dinas

Hi @dindanas,
Your ProBook 4530s is a commercial product and to get your issue more exposure I would suggest posting in the commercial forums. Here is a link to the Commercial Notebook forum.
Please click “Accept as Solution ” if you feel my post solved your issue.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Thank you,
BHK6
I work on behalf of HP

Hp probook 4530s drivers for windows 7 ultimate 32bit

I am running Windows 7 Professional 64bit on my hp probook 4530s notebook, and I am going to upgrade to Windows 7 Ultimate 32bit. but I will need the drivers for the new windows, because i will have to format the laptop to change from 64 bit to 32 bit.
So where can i download all the drivers.
kind regards
Jean Meintjes

Hi, Jean:
Below is the link to the support and driver page for your notebook:
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=5060882&lang=en&cc=us...
Just use the W7 Pro 32 bit drivers for your W7 Ultimate installation.
They will work just fine.
Best regards,
Paul

RE: X1 Carbon windows 7 Professional 64bit error message

Hi, Good Morning Everybody, I wish somebody here would advise me of my problem, Thanks.
Problem of Laptop
=================
[Message 01]
Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.
[Message 03]
hi, head of customer service,
below is a chat log i had online for your review. My concern is that
everybody work for a living - if u r the specialist in this field, i
respect that u can foresee what is going to happen if u tell somebody who
is not a specialist to do a specialist's job. U should be able to provide
advice n the possible outcome if things do not work out right, because it
is the end user who needs to face it n live with it. Take for example, if
the office building was on fire n the human instinct is to fight fire
first. But the workers do not have the proper knowledge of fire n also
not equipped with good PPE. This worker probably called the fire
department to report a fire, n at the same time the fire department
specialist at the other end of the line told that worker to
"troubleshoot" the fire without giving him the possible outcome if the
fire blown out of scale, what price this worker will have to pay.
My questions are:
a) what is the goal of having on-line chat service? Is it to resolve
simple technical issues, that's why an average IT worker can do the job?
b) if the end user already knew the problem he is facing and he is
expecting the best advice/solution from an expert rather than from an
average IT worker, would it be better for the end user to go straight to
email? Or straight to the service center?
c) Is there a team work spirit between your chat section and service
center? Is it going to take a long time to communicate among themselves
when they face the same problem real time - meaning they can't talk to
each other over the phone to resolve the same problem which the end user
is facing? If they can discuss over the phone, and possibly the service
center also share the same steps to resolve the problem but could not be
sure if something goes wrong, the os of the laptop need to be
re-installed. Then, the end user would not have to do a double job - to
chat online and go down to the service center only find out that it is
the same answer. Would it be better for the chat person to do the double
job internally for the end user?
[Hi, I bought X1 Carbon and found an error message when right click on the
1st page after startup. The error message reads
Microsoft Visual C++ Debug Library
Debug Assertion Failed!
Program: C:\Windows\System32\igfxsrvc.exe
File: D:\Program Files\Microsoft Visual Studio 9.0\VC\ATLMFC\INCLUDE\
atlcom.h
Line:2475
Expression: 0&& "Release called on a pointer that has already been
released"
For information on how your program can cause an assertion failure, see
the Visual C++ documentation on asserts.
(Press Retry to debug the application)
By right, right click should show the menu of View, Sort by, Refresh,
......Screen resolution, Gadgets, Personalize, but just cannot access
into the right click menu immediately. I have to wait more than 3 minutes and
get out of the error message, then the right click menu appear. Why is
this so?
Please advise how to eliminate the message and have the right click menu
immediately. Should I bring the laptop to your service center for repair
or you can email me the steps to solve this problem.
Regards, Simon.]
[Message 02]
[GoToAssist (10:11:53):
Connecting...
GoToAssist:
Dear Customer,
Thank you for contacting Lenovo and showing your interest in Lenovo
instant support program. I see you have a question on your product. I am
going to take few moments to review the information of your product and
message you back, right here, very soon. Please add this page to your
favorites, in case you get disconnected or close your browser, so you may
come back to this conversation.
Saraswati (10:12:25):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (10:12:30):
Hello Simon.
Saraswati (10:12:35):
Good Morning.
Saraswati (10:14:47):
Simon , Have you checked with the steps I have provided in the earlier
session ?
SIMON (10:14:55):
hi, i just lost the session chatting with u. Can u show me all that again
here?
Saraswati (10:16:14):
Sure , Let me paste the conversation in this session.
Saraswati (10:17:26):
Saraswati (06:54:46):
Thank you for contacting Lenovo Technical Support. My name is Saraswati.
I will be happy to assist you with this issue.
Saraswati (06:54:59):
Hello Simon.
Saraswati (06:55:05):
Good morning.
Saraswati (06:55:35):
Please be connected to the session while I check with the query.
Saraswati (06:59:38):
It appears we may have been disconnected. Please respond so that I can
confirm our connection.
SIMON (07:00:27):
Hi, yes I can see u r writing....
Saraswati (07:00:58):
May I know the operating system installed? Windows Xp, Windows Vista,
Windows 7 or Windows 8? Is it 32-bit or 64-bit?
SIMON (07:02:20):
it's windows 7 64bit, the laptop is i5-3rd gen with 4gb ram
Saraswati (07:03:36):
http://www.intel.com/support/graphics/sb/cs-003927.htm please click on
the link to fix the issue.
Saraswati (07:05:49):
Let me help you with the latest graphics driver
Saraswati (07:08:14):
http://download.lenovo.com/ibmdl/pub/pc/pccbbs/mobiles/g1d625ww.exe
Intel HD Graphics Driver for Windows 7 (64-bit)
Saraswati (07:08:25):
Please install this link.
Saraswati (07:09:01):
Before installing uninstall the same form the device manager under the
display adapter option.
SIMON (07:10:21):
hi, the link u recommended mentioned something like reinstall graphics
drivers. I don't have the drivers n think it's pre-installed inside X1
Carbon. My concern is what is the worst case it could be if I execute the
link file n something goes wrong?
Saraswati (07:12:28):
Simaon , I would like to inform you that it is only the driver
reinstallation. It will hamper the system performance. It is the driver
provided with the preloaded OS. Hence it should not cause any issue.
SIMON (07:12:48):
btw, the os is windows 7 professional, hope i get it right.
Saraswati (07:13:09):
However please check by uninstalling and reinstalling the Microsoft
Visual C++ .
Saraswati (07:13:31):
Yes , I have provided the link for the Windows 7 OS 64 bit.
Saraswati (07:13:58):
Please check with the above steps. This should fix the issue.
Saraswati (07:16:32):
Please feel free to get back to us at any moment , we will resolve all
the issues related to the Lenovo Machine.
Saraswati (07:17:32):
It is been my pleasure assisting you with the issue.
SIMON (07:18:06):
ok, i take some time to do this, how to get back to u? do i need to
re-boot the laptop during the process? Please don't tell me i need to
re-install the os again if everything fail, because there r some
3rd-party software which i do not have the original serial
Saraswati (07:19:18):
Please reinstall the drivers from the driver link. Then restart the
machine and check if the issue persists.
Saraswati (07:19:57):
If still the issue persists then reinstall the Microsoft Visual C++.
Saraswati (07:20:12):
Hope this information is helpful
Saraswati (07:20:27):
Thank you for choosing Lenovo's chat Support. Kindly note, that there
will be a customer satisfaction survey once you close this chat session.
Please provide your valuable feedback for the chat session with me on a
rating scale between 0 to 10, where 9 to 10 being satisfied with the
service provided.
Saraswati (07:20:33):
Please note that the survey is only for current interaction. If you have
any comments or feedback, please mention same under customer comments.
Our team will take actions based on these comments to help us to serve
you better. Thanks for your understanding & Support.
Saraswati (07:20:44):
Thank you again for contacting Lenovo and have a great day Simon.
Saraswati (07:22:00):
You may close this chat session now.
SIMON (07:22:06):
hi, have any of your specialist face with this problem before?
Saraswati (07:23:22):
We donot remember , but we would have assisted in the similar manner.
Please check with the steps.
Saraswati (07:23:45):
Thank you for choosing Lenovo and have a great day ahead.
SIMON (07:24:48):
my worry is as i mentioned that i dont have the serials n it will be a
great price to pay for me if i miss some steps or something just not
right, then i would rather leave it as it is.
Saraswati (10:17:51):
Saraswati (07:25:43):
You can visit the nearest service center , so that the service technician
will help you further.
Saraswati (07:26:29):
Please contact on "800 6011 343 (Local number only) +603 8315 6856
(DID)"-- singapore
Saraswati (07:27:03):
Contact on the above numbers the concerned team will provide you the
address of the service center.
SIMON (07:27:55):
do u think the technician is more capable than any on-line chat engineers
because they can see the real problem of the laptop?
Saraswati (07:28:54):
The steps I have provided should fix the issue. If you need any further
assistance please visit the service center.
SIMON (07:30:37):
if they r just feedback to me with the possibilities i already perceived,
then it's not worth the trip for me to take time off work n travel
2 hours to n 2 hours fro your repair center.
SIMON (07:33:51):
My question is that "is it very difficult to comm between u and the
service technician side, then feedback to me online? so i dont have take
time off work n i also have to face my boss n it will look bad on me.
Please be more considerate?
Saraswati (07:36:02):
Simon , I understand your concern. Please check with the steps I have
provided and get back to us if the issue is not fixed. if you are
doubtful that the above steps might delete any of your files then you can
visit the service center , so that the service technician will check with
the issue personally.
Saraswati (07:36:47):
Thank you for choosing Lenovo and have a great day ahead Simon.
Saraswati (10:23:17):
Is there anything else that I can assist you with, at this moment ?
SIMON (10:23:26):
ok, I will take your advice n talk to some IT guys b4 i act on it, to be
sure that i made an informed decision. if i really have doubts, then i
would have to suffer in silence n just live with that error message for
the time being.
Saraswati (10:23:53):
Alright.
Saraswati (10:24:23):
Thank you for contacting Lenovo and have a great day Simon.
Saraswati (10:25:09):
You may close this chat session now.]
Regards, Simon.

Dev environment - i mean Visual Studio
But fist try to check in Event viewer if there's any error message that could help to find what the actual problem is.
Regards
Bartek

Windows 7 Professional 64bit: Installation of Indesign CS3 debug

Hi
I try to install Indesign CS3 Debug on a Windows 7 Professional 64bit pc. I extract the setup files and start setup.exe. A dialog is shown (with a progrss bar), but after a short time (2, 3 seconds), the application stops (crashs) without any message.
What can I do?
Can I install CS3 Debug on Windows 7?
Thanks for the help.
Hans

Dev environment - i mean Visual Studio
But fist try to check in Event viewer if there's any error message that could help to find what the actual problem is.
Regards
Bartek

In my hp probook 4530s comes with windows 7 home premium,internal bluetooth is disabled by the windo

I am using hp probook 4530s comes with windows 7 home premium.In my laptop internal bluetooth is disabled by the windows from device manager, how can I enable it ?Please help......The error is:Windows has stopped this device because it has reported problems. (Code 43)

It sounds like your laptop is possibly overheating ,which will cause a shutdown. Have you checked your cooling fan to be sure it is working? Cleaned the vents/ports with compressed air to increase airflow?
How to prevent and deal with overheating
******Clicking the Thumbs-Up button is a way to say -Thanks!.******
**Click Accept as Solution on a Reply that solves your issue to help others**

MOVED: MSI Live Update not working Windows XP Professional 64bit Edition!!!

This topic has been moved to Operating Systems.
MSI Live Update not working Windows XP Professional 64bit Edition!!!

Thank you so much. I just want to say I really appreciate when people do take the time to post me in return. So I really mean it, Thank You.
A quick question. You see, I have been upgrading my computer. I installed a Belkin USB USB Card (high speed 2.0) cause I needed more USB ports. Then I checked for compatable RAM and upgraded my RAM from 512MB to 2Gigs. Everything alright.
Now, I have checked for processors that are compatable with my board K9VGM-V (MS-7253). And MSI's chart says mine is compatable with the AMD Athlon 2x 6000 (3.0Ghz) *IF* I use the 89 watt and not the 125 watt. Here is a good URL for the processor details I found:
http://www.cpu-world.com/CPUs/K8/AMD-Athlon%2064%20X2%206000+%20-%20ADA6000IAA6CZ%20(ADA6000CZBOX).html
Now do you have any tips and I will probably have to flash to BIOS for sure after this upgrade won't I?

Igdpmd64.sys BSOD on HP ProBook 4530s Windows 7 64-bit

I used my HP ProBook 4530s with Windows 7 64-bit and Internet Explorer 8 (IE8) installed since 2011 with no issues.
Recently I updated Windows to SP1 and IE10. All works well except one thing.
When I run IE10, open few tabs and hoover my mouse over IE10 icon so that it shows the half-transparent small windows my PC crashes.
It shows blue screen with PAGE_FAULT_IN_NONPAGED_AREA message caused by igdpmd64.sys driver.
1) I found at HP forum the post "igdpmd64.sys BSOD on HP Envy14t".
I followed the recommendation to uninstall KB2670838.
However after rebooting PC the IE10 disappeared and IE8 came back to life.
I updated then Windows trying to block the KB2670838 installation but it was impossible since KB2670838 was not shown at the list but somehow "installed in the background".
So I was back to the point "all works well except one thing".
2) I found another forum post which recommended to upgrade the igdpmd64.sys driver.
I went to: http://h20564.www2.hp.com/hpsc/swd/public/readIndex?sp4ts.oid=5060881&swLangOid=8&swEnvOid=4058
Chose: Drivers - Graphics (3)
Downloaded the newest Intel Graphics Kernel Mode Driver 8.15.10.2559 from 2012-02-22
However during the installation process I received a message (2a):
"This computer does not meet the minimum requirements for installing the software".
I called HP support who advised to install the previous version of the driver.
I did it but received the same message (2a)
I called HP support again who advised to install the driver from the Intel page.
3) I went to: https://downloadcenter.intel.com/search?keyword=Intel%c2%ae+Q45+Express+Chipset
Downloaded: Intel® Graphics Media Accelerator Driver, Windows 7* 64, Windows Vista* 64 (exe)
graphics driver version 15.17.19.64.2869 (8.15.10.2869) for Intel® integrated graphics.
However during the installation process I received a message (2a).
I have no more ideas. Could anybody help me please ?
Best Regards,
Sylwek
This question was solved.
View Solution.

I know it's weird that I reply to myself.
HP support advised me to install the ATI Video Driver and Control Panel
at:
http://h20564.www2.hp.com/hpsc/swd/public/detail?sp4ts.oid=5060881&swItemId=ob_101995_1&swEnvOid=405...
It helped :-)
Thank you HP support Poland

Network Controller Driver not found, hp proBook 4530s, Windows 7

I am using a notebook (proBook 4530s), with Windows 7, 64-bit, and in the device manager I get a yellow exclamation mark in Network controller even after downloading and installing the respective driver Atheros / Realtek Wireless LAN Driver(s). The driver packacge extracts itself and there is no confirmation of finishing the setup. The problem started after a BIOS update by the hp support assistant on my pc

You're very welcome. Below is the link to the driver you need for the Ralink wireless card in your notebook. http://h20566.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&spf_p.tpst=swdMain&spf_p.prp_swdMain=wsrp-navigationalState%3Didx%253D%257CswItem%253Dob_111782_1%257CswEnvOID%253D4059%257CitemLocale%253D%257CswLang%253D%257Cmode%253D%257Caction%253DdriverDocument&javax.portlet.begCacheTok=com.vignette.cachetoken&javax.portlet.endCacheTok=com.vignette.cachetoken

MOVED: Driver problems with Windows Professional XP 64bit Edition

This topic has been moved to Operating Systems.
Driver problems with Windows Professional XP 64bit Edition

Well, after looking around the forum here I found an answer that works! I wish I could remember who to give credit too though. I installed the latest Vista drivers and I got static all the time. I tried another members suggestion of disabling the X-Fi device in the Device manager every time I log off and then enable the X-Fi the next time I log in. I have great sound as long as I do that. Also, for connecting to a home system I am using the DTS-60, $00 on this website, but it works well if you havea DTS decoder. I am using the X-Fi extreme Music edition. Good Luck, hopefully another driver is on the way.

Need HELP :: Oracle 10g for Windows 7 Professional 64bit

I am trying to install Oracle 10g for my Laptop (Windows 7 64bit)and i am getting error message: ERROR Starting Database Control.
Here are last few lines from emconfig.log file ---
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface executeCommand
CONFIG: Enter Enterprise Manager Root Password :
******** **** Certificate was added to keystore
Certificate reply was installed in keystore
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.FileUtil printFileToLog
CONFIG: Printing file(After Secure DBConsole): C:\oracle\product\10.2.0\db_1\oc4j\j2ee\OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G\config\http-web-site.xml
<?xml version = '1.0' standalone = 'yes'?>
<!DOCTYPE web-site PUBLIC "OracleAS XML Web-site" "http://xmlns.oracle.com/ias/dtds/web-site-9_04.dtd">
<web-site port="1158" display-name="OC4J Java HTTP Web Site" secure="TRUE">

<default-web-app application="default" name="defaultWebApp"/>
<web-app application="default" name="dms0" root="/dms0"/>
<web-app application="default" name="dms" root="/dmsoc4j"/>
<web-app application="em" name="em" load-on-startup="true" root="/em" shared="true" />

<access-log path="../log/http-web-access.log"/>

<ssl-config needs-client-auth="false" keystore="C:\oracle\product\10.2.0\db_1/oc4j/j2ee/OC4J_DBConsole_NCI-01874908-L.nci.nih.gov_ORA10G/config/server/keystore.test" keystore-password="FE7337F1A5D238357C9C6819AFC4F812" />
</web-site>
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil secureDBConsole
INFO: Database Control secured successfully.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.EMDBPostConfig performConfiguration
CONFIG: Securing Database Control completed successfully .
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.ParamsManager getParam
CONFIG: No value was set for the parameter ORACLE_HOSTNAME.
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.DBControlUtil startOMS
INFO: Starting Database Control (this may take a while) ...
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: cmdType: 0
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Starting Windows service...OracleDBConsoleORA10G
Jan 4, 2012 2:47:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:48:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:49:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:50:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:51:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:52:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:53:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:54:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:29 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:39 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:49 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:55:59 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:09 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Waiting for service 'OracleDBConsoleORA10G' to fully start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.util.PlatformInterface serviceCommand
CONFIG: Initialization failure for service during start
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
SEVERE: Error starting Database Control
Refer to the log file at C:\oracle\product\10.2.0\db_1\cfgtoollogs\dbca\ORA10G\emConfig.log for more details.
Jan 4, 2012 2:56:19 PM oracle.sysman.emcp.EMConfig perform
CONFIG: Stack Trace:
oracle.sysman.emcp.exception.EMConfigException: Error starting Database Control
at oracle.sysman.emcp.EMDBPostConfig.performConfiguration(EMDBPostConfig.java:646)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:224)
at oracle.sysman.emcp.EMDBPostConfig.invoke(EMDBPostConfig.java:193)
at oracle.sysman.emcp.EMConfig.perform(EMConfig.java:184)
at oracle.sysman.assistants.util.em.EMConfiguration.run(EMConfiguration.java:436)
at java.lang.Thread.run(Thread.java:595)

Pl identify which exact version of 10g is being installed.
Only 10.2.0.5 is supported/certified. The install steps are here - http://docs.oracle.com/cd/B19306_01/relnotes.102/b15680/toc.htm#BABEBBJF
MOS Doc 1222603.1 (Enterprise Manager Database Control Configuration - Recovering From Errors Due to CA Expiry on Oracle Database 10.2.0.4 or 10.2.0.5 [Video]) may be relevant
HTH
Srini

Installing iTunes 7.5 on Windows XP Professional 64bit

I recently received an iPod Nano for Christmas. When I plugged it in, the version of iTunes I was using informed me that I had to upgrade to a new version of iTunes to support this iPod. I installed version the package of iTunes 7.5 and whatever version of Quicktime comes with it. When I launch iTunes. I get the error about not being able to rip or burn CDs and I must reinstall iTunes. When I go into About iTunes, the screen informs me that the CD driver is not available. I have already tried getting the GEAR driver for Windows XP 64bit and that didn't help anything. I've also tried several different versions of iTunes with no improvement. When I do have my iPod connected, iTunes freaks out about being unable to read the data, then 5 seconds later, the music shows up perfectly. On the actualy iPod, the screen says connected,connecting, and disconnected. I'm sure that it's a problem with the 64 bit version of Windows XP because I've read several problems regarding this. However, they all applied to Vista. Any help or links? I'd even settle for sympathy at the moment.

VBScript isn't registered properly. Fairly simple fix:
http://docs.info.apple.com/article.html?artnum=304405

Probook 4530s Display Enclosure / Hinge Set / Optical Drive Replacement (Windows 7 Home Premium)

Hello, thank you in advance for taking the time.
I have 2 Probook 4530s, one is fully functional, with cosmetic damage (and an nonworking optical drive).
The other is missing HD and ram, with a dysfunctional MB, but pristine as far as aesthetics.
My goal is to replace my hingeset, display enclosure and optical drive on my working 4530s with the parts from the non-working one.
I do have a pdf titled "c02844462" which I believe is the full manual for the 4530s.
This brings up a few questions.
1. Would it be easier to transfer the HD, ram, and MB from working laptop to the other, or rather transfer the hinge set, display enclosure and optical drive from nonworking to other.
2. What tools would i need aside from a small phillips/flat?
3. As I am fairly inexperienced with computer/laptop hardware, (I've only installed ram and replaced a keyboard) am I getting myself in too deep with either or both of these options? (my warranty is no longer applicable).
Again, thanks for taking time to read and ponder this
broken hinge
nonworking (left), working(right)

*although inexperienced, I am meticulous and pretty tech savvy*

Updated AMD 7470M drivers, Probook 4530s, Win 7

Hi,
I need to update my graphics driver for use of Adobe Photoshop on my laptop.
Specifications
Laptop
Product Name: HP ProBook 4530s
OS: Windows 7 Professional 64-bit Service Pack 1
Processor: Intel(R) Core(TM) i7-2670QM CPU @ 2.20GHz
Graphics
Adapter: AMD Radeon HD 7470M
Current resolution: 2560 x 1080
Refresh rate: 60
Version: 8.910.0.0 (13/10/2011)
Adapter: Intel(R) HD Graphics Family
Version : 8.910.0.0 (13/10/2011)
Graphics memory 4,876 MB
Aero status: Enabled
Downloaded a driver directly from AMD website amd-catalyst-14-9-win7-win8.1-64bit-dd-ccc-whql.exe but it did not work.
Does HP have an updated driver available ?
Thanks.

Hi:
Below are the links to the drivers you need:
USB\VID_03F0&PID_311D&REV_0001:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_197B&DEV_2392, 2393:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_168C&DEV_002B&SUBSYS_1461103C&REV_01:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
PCI\VEN_8086&DEV_1C3A&SUBSYS_167C103C&REV_04:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
ACPI\HPQ0004:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...
USB\VID_138A&PID_003C&REV_0086:
http://h20565.www2.hp.com/portal/site/hpsc/template.PAGE/public/psi/swdDetails/?sp4ts.oid=5060882&sp...

OEM windows 7 professional 64bit - HP ProBook 4530s

Similar Messages

Maybe you are looking for