OEM10 agent on Solaris 10?

I can't install OEM10 R2 agent on Solaris 10.
Any way to get around it?
When the authentic agent be released for Solaris10?
Thanks

I was able to get the agent installed with some minor difficultly. However, the agent was not uploading any meaningful information. The only target that showed up in the Grid Control was the agent itself. So it was able to upload some information. The agent was just not discovering anything else about Oracle databases or the system itself.

Similar Messages

Install Nagios agents on Solaris 10 to monitor from RHEL 5

Hi,
Could anyone let me know the steps to be followed to install Nagios agents on Solaris 10 for monitoring from RHEL5. It is very urgent please help me.
Thanks
Rao

Hi Sugunakar,
There are a few small things I can think of checking:
I am trying to install SMC on solaris 10What version of Solaris 10 are you using? You need 11/06 (aka "Update 3") or later. Also, it looks like this is on a V210: how much memory and swap do you have ([requirements here|http://docs.sun.com/app/docs/doc/820-2215/deployment-72?l=en&a=view])? And have you [edited your /etc/project file|http://docs.sun.com/app/docs/doc/820-2216/chapter2-1000?l=en&a=view] to adjust the shared memory settings?
Have you applied any of the [patch sets|http://forums.halcyoninc.com/showthread.php?t=104]?
smcdatabase service is always in maintenance mode.It would be interesting to see what that service log says. Look in /var/svc/log/application-management-sunmcdatabase:default.log for clues.
/var/opt/SUNWsymon/install/guibased-setup.1285765588453.sh: /var/opt/SUNWsymon/db/data/SunMC/pg_hba.conf: cannot createIs there any reason why SunMC may not be able to write to /var (or /var/opt/SUNWsymon)? Maybe portions of /var are read-only (shared from a global zone, or over NFS)?
I've done a lot of SunMC pilot projects over the years: if you could use some help speeding up your eval just send me an email.
Regards,
[email protected]

Problems installing 10.2.0.5.0 grid control agent on Solaris 9

I'm getting the following error when attempting to install the 10.2.0.5.0 grid control on Solaris 9:-
java.util.zip.ZipException: invalid entry size (expected 1590760 but got 1589445 bytes)
at java.util.zip.ZipInputStream.readEnd(Unknown Source)
at java.util.zip.ZipInputStream.read(Unknown Source)
at java.io.FilterInputStream.read(Unknown Source)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1460)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1426)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1315)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1274)
at oracle.sysman.oii.oiix.OiixFileOps.copyStream(OiixFileOps.java:1229)
at oracle.sysman.oii.oiix.OiixFileOps.copyStreamFromJar(OiixFileOps.java:1160)
at copyActionHelper.copyFile(copyActionHelper.java:1688)
at copyActionHelper.copyFileFromStream(copyActionHelper.java:722)
at copyActionHelper.copyFileFromJar(copyActionHelper.java:632)
at copyActionHelper.copyDefaultFiles(copyActionHelper.java:545)
at copyActionHelper.copyGroupFromJar(copyActionHelper.java:173)
at copyActionHelperux.installCopyGroupAction(copyActionHelperux.java:158)
at sscopyGroupFromJarux.installAction(sscopyGroupFromJarux.java:89)
at oracle.sysman.oii.oiis.OiisCompActions.doActionWithException(OiisCompActions.java:2074)
at oracle.sysman.oii.oiis.OiisCompActions.doActionImpl(OiisCompActions.java:1731)
at oracle.sysman.oii.oiis.OiisCompActions.copyGroupActionInner(OiisCompActions.java:1400)
at oracle.sysman.oii.oiis.OiisCompActions.copyGroupAction(OiisCompActions.java:1128)
at oracle.sysman.oii.oiis.OiisCompActions.doAction(OiisCompActions.java:863)
at Components.oracle.jdk.v1_5_0_17_0.CompActions.doAction(Unknown Source)
at Components.oracle.jdk.v1_5_0_17_0.CompInstallPhase1.doActionP1copyGroup4(Unknown Source)
at Components.oracle.jdk.v1_5_0_17_0.CompInstallPhase1.stateChangeActions(Unknown Source)
at Components.oracle.jdk.v1_5_0_17_0.CompActions.stateChangeActions(Unknown Source)
at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentIP1WCCE.performStateChangeActions(OiifwInstallPhaseWCCE.java:1686)
at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentInstallPhaseWCCE.doOperation(OiifwInstallPhaseWCCE.java:1083)
at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE$OiifwComponentIP1WCCE.doOperation(OiifwInstallPhaseWCCE.java:1655)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiif.oiifw.OiifwInstallPhaseWCCE.doOperation(OiifwInstallPhaseWCCE.java:612)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiif.oiifw.OiifwActionsPhaseWCDE.doOperation(OiifwActionsPhaseWCDE.java:607)
at oracle.sysman.oii.oiif.oiifb.OiifbLinearIterator.iterate(OiifbLinearIterator.java:147)
at oracle.sysman.oii.oiic.OiicInstallSession$OiicSelCompsInstall.doOperation(OiicInstallSession.java:3878)
at oracle.sysman.oii.oiif.oiifb.OiifbCondIterator.iterate(OiifbCondIterator.java:171)
at oracle.sysman.oii.oiic.OiicPullSession.doOperation(OiicPullSession.java:1286)
at oracle.sysman.oii.oiic.OiicSessionWrapper.doOperation(OiicSessionWrapper.java:289)
at oracle.sysman.oii.oiic.OiicInstaller.run(OiicInstaller.java:572)
at oracle.sysman.oii.oiic.OiicInstaller.runInstaller(OiicInstaller.java:962)
at oracle.sysman.emgc.oneclick.OneClickWizard.runOuiInstaller(OneClickWizard.java:458)
at oracle.sysman.emgc.oneclick.OneClickDirectory.runInstaller(OneClickDirectory.java:165)
at oracle.sysman.emgc.oneclick.OneClickInstaller.runInstaller(OneClickInstaller.java:209)
at oracle.sysman.emgc.oneclick.OneClickInstaller.doCompletion(OneClickInstaller.java:243)
at oracle.sysman.emgc.oneclick.OneClickInstaller.process(OneClickInstaller.java:269)
at oracle.sysman.emgc.oneclick.OneStartup.startup(OneStartup.java:383)
at oracle.sysman.emgc.oneclick.OneArgs.main(OneArgs.java:700)
at oracle.sysman.emgc.oneclick.OneStartup.main(OneStartup.java:391)
Before the installer gets to this stage there are o/s prerequisite checks that fail. Has anyone encountered this before ?

Thanks, I was going to say that there should not be any problems with my zip file having used it to successfully install the agent on Solaris 10, however havign run teh cksum again, it would appear that the file has somehow got corrupted. Thanks for pointing me in the right direction.

How to register SAP CCM4x Agent on Solaries platform?

Hi,
Could any one tell me that how to register SAP CCM4x Agent on Solaries Platform?
Thanking you
Regards
Pranav

Check the documentation
http://service.sap.com/monitoring
There you will find guides how to set up your scenario.
Markus

12c Agent on Solaris 10 version earler than u9?

Was wondering if anyone has had a positive experience running the 12c agent on Solaris 10 version older than the one that is certified (u9). I have fully patched up Solaris 10 u4 and u8 servers servers here and cannot justify upgrading to u9 just to accomodate an agent.

Hello,
I've found a workaround to solve the problem.
On the target server a temporary installation directory was created containing the agentDeploy.sh script.
Inside this script there are several java calls and some are missing the information to run as 64-bit.
I've changend the rows where the flag "-d64" was missing:
..../java -d64 -classpath....
and then I've made a retry from EM 12c.
And it works successfully.
Have a nice day!
Joerg

Installing the just released 10.2.0.2 agent on Solaris Sparc

Anyone tried installing the new 10.2.0.2 agent on Solaris Sparc? (Solaris 9). After the agent installs the config fails and I found a bunch of binaries (like emagent) are zero length.
Didn't have any issues installing the previous 10.2.0.1. It took so long for the 10.2.0.2 agent to be released for Solaris, I'm wondering if there's an issue with the package.

Hi all,
Since you all have already gone through upgrade process from 10.2.0.1 to 10.2.0.2,
I need help doing the same.
We have 10.2.0.1 Grid Control installed in test env (solaris 5.9 Sparc), and I am planning to upgrade it to 10.2.0.2.
My question is, when we shut down OMS to apply 10.2.0.2 patch, what happens to the agents? they will not be able to upload the stats, and may get inactive after reaching the disk usage limit.
Also, when we complete the upgrade patch, when OMS comes up, can the 10.2.0.1 agent still talk to the 10.2.0.2 OMS? I am asking this from the logistical point of view. We have 15 servers, and it may be couple of days, before all agents can be upgraded. In that scenario, I wish to keep the Grid Control available for testing barring the agents under upgrade.
We havenot turned on the automatic patch management, and tempted to use the Method 2 of 4.1.2.1 item of the Readme document of the patch.
What were you experiences? and any advices?

Error when installing 10.2.0.3 agent on solaris 8

I've installed the agent successfully on other solaris 8 servers but on this one machine, i get the "Heap at VM Abort" error.
I've seen this in the past when doing oracle installations and the trick was to use a different size for jre_memory_options.
However, i've modified the oraparam.ini file but it hasn't failed.
I've seen many hits on google but don't see a fix that works.
Any ideas?
Thanks.

here are more details on the error:
Heap at VM Abort:
Heap
def new generation total 2112K, used 1270K [0xea800000, 0xeaa20000, 0xeb8e0000)
eden space 2048K, 58% used [0xea800000, 0xea92db00, 0xeaa00000)
from space 64K, 100% used [0xeaa00000, 0xeaa10000, 0xeaa10000)
to space 64K, 0% used [0xeaa10000, 0xeaa10000, 0xeaa20000)
tenured generation total 1408K, used 1179K [0xeb8e0000, 0xeba40000, 0xf4000000)
the space 1408K, 83% used [0xeb8e0000, 0xeba06cc8, 0xeba06e00, 0xeba40000)
compacting perm gen total 5632K, used 5389K [0xf4000000, 0xf4580000, 0xf8000000)
the space 5632K, 95% used [0xf4000000, 0xf4543738, 0xf4543800, 0xf4580000)
Local Time = Wed Jan 30 10:58:42 2008
Elapsed Time = 3
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.2_04-b05 mixed mode)
# An error report file has been saved as hs_err_pid28700.log.
# Please refer to the file for further information.
I can't seem to find that log file above anywhere. Where would that be?

Grid Control Agent for Solaris 10 x86 32bit (not 64 bit)

Hi,
I am trying to locate the 32 bit version of Solaris 10 x86 agent for Grid Control OEM 11g (11.1.0.1.0).
There is only a X86 64 bit version listed at the download site.
My isainfo shows that solaris install is 32 bit.
Does anybody know if a 32 bit version of the agent for Grid Control 11g is available.

No ..Its not available yet.
Please contact Oracle Support.
Regards
Rajesh

Grid control agent for Solaris 10 x86-64

Are there any estimated release dates for a Solaris 10 x86-64 version of the grid control agent?

This is what I get from the SR...
"Date of availability for the Oracle Management Agent on Sun x64 Solaris 10 is Planned, but not yet available. Estimated date of release has not yet been disclosed. Sorry, there is no further information."
So it's possible to run a database on Solaris 10 x86-64 but there's no grid control agent. Lovely.

Reconfiguing Grid Control Agent on Solaris 8.

I would like to know if I change my IP and Hostname on my Solaris 8 server if I can reconfigure my grid control agent or do I have to reinstall the agent all together?

Hi, i have a machine with 2 IPs and each IP has it's own name registered on DNS. One is the same as hostname and the other one is used as service name for occasion when the production must be moved to another machine with different IP. In that case service name and service IP remains the same.
Is there a way to configure agent on the service IP instead the one registerd with hostname? Or perhaps change hostname in GC configuration to service name?
Because now, i have a situation that listener is listening on interface with service IP, and GC agent can't discover it.
Any help is welcome. thanx.

OEM Grid Control Release (not just agent) for Solaris x86?

I see management agents that can be downloaded off of OTN, but is there an official release of Grid Control for Solaris on x86?
"Oracle Enterprise Manager 10g Grid Control *Release 5* (10.2.0.5) for Solaris Operating System *(SPARC)*"
"Oracle Enterprise Manager 10g Grid Control *Management Agent Release 1* (10.1.0.3) for Solaris *x86*"

Please throw me some more meat on that bone. I'm still waiting for my Metalink access. (i.e., can you cut and paste the note text onto this forum message.)Sharing(Cut&Paste) Metalink Notes is not legal.
Oracle has no plans for 10.2.0.4 and for 10.2.0.5 it's expected by Q3 on x86(32&64)

Install agent on solaris 10 using agent deploy application?

Hi all,
I have installed 10g grid control on solaris 10 with new repository database on same machine.
The OMS, and agent is running on grid host.
Now I want to add other hosts (targets) into grid. For this, I have to install agent on target hosts. I am using agent deploy application method for installation of agent.
It is giving error
Istall --> Failed
"Pre-Install Script is Not Executed, Install is Failed, Run root.sh is Not Executed, Post-Install Script is Not Executed, Collection of Logs is Success"
version for agent and OMS is 10.2.0.1 and for repository database is 10.1.04
any idea, how to troubleshoot this?

Did you get answer? I had same problem on agent 10.2.0.4 deployment on linux 2.6.9-55.ELsmp.

Performance Monitor Agent Configuration Solaris

Hi there,
Was wondering if anyone here has managed to set up the Performance Monitor on
Solaris?
I've followed the instructions in the manual to the letter but can't seem to get
the agent hooked up on the console. I know that the agent is running but when
I click on the Performance Monitor -> Configuration -> Agent, the console does
not display the any Agent.
Can any one here please help me?
Cheers
Zeus.

Per,
Could you please list the config steps performed including all the DB operation you performed for setting up the new DB?
Regards,
Deepak

Agent for Solaris x86

Does anyone have any info about the availability of an agent(preferably 10.2.0.5) for solaris x86 platforms? I was able to find a document referencing a 10.2.0.2 version but nothing else.

Hi,
check note 793512.1 - Release Schedule of Current Grid Control Patch Sets
regards,

SMD agents for Solaris X86_64

According to PAM Solaris X86_64 is released generally for WebAS 7.00 ABAP + Java (NW2004s SR1 to be exact).
However, there are no SMD agents available for that platform. Any idea why those will be published?
Regards,
Markus

Hi Dolores,
thanx - did that - and they told, that they "do not exist" (that's what I know already).
I'll update the thread as soon as I get some information.
Markus

OEM10 agent on Solaris 10?

Similar Messages

Maybe you are looking for