OEM12c agent after successfull installation with agent_port firewalled!

It is possible to install OEM 12c agent on a host where the agent_port has been firewalled. The agent installs successfully,
but agent details aren't known to OMS.
After unblocking the port agent and oms can communicate. The agent has no targets listed, and oms doesn't list the agent.
OMS doesn't list the agent in the setup=>Add target=>configure auto discovery=>multiple target-type discovery on single host=>configure
So where do I go from here ? Can I add the agent to OMS ? or do I delete the agent and start again ?

From: Re: Agent does not upload to OMS in OEM 12c
There could have been some problem adding the agent and host targets during the agent deployment. Try doing the following steps:
- Execute the following commands
/u01/app/oracle/agent12c/agent_inst/bin/emctl config agent addinternaltargets
/u01/app/oracle/agent12c/agent_inst/bin/emctl upload agent
- Check the console for the targets
Regards,
- Loc

Similar Messages

Cant print document after lion installation with my fuji xerox printer

i cant print after lion installation with my fuji xerox c1110b printer, even after i remove and reinstall the driver.
in the print window under status indicate error,
for other program even the print button is not working, need help
thanks

As a temporary fix until the new driver, you can still use Generic PCL Laser printer selection to print black and white on Fuji Xerox C1110B. When adding the new driver, select Options & Supplies. When the new window rolss down, click on the middle Driver button. Then select Generic PCL Printer, and OK.
Maybe there is another substitute driver we can use to print in color as well until Fuji Xerox gets its act together?

Serious problems after Mavericks installation with External Drive Lacie P9220.

Experiencing serious problems after Mavericks installation with External Drive Lacie P9220 1TB. Mac Finder totally locked!
I had to format the External hard drive with a Windows PC (fat32), then format again with my IMac (mac Journal.) and hopefully restored data from time machine backup.
So far so good but system looks unstable. Some software were not able to write on the hard drive.Some strange things happens. With Mountain Lion never had an even minor issue.
I read many discussion regarding problems with WD, just wondering if anyone had the same problems with Lacie and if there is any tip to solve the
problem.
Many thanks.
Marco

Thanks very much for your reply.
Unfortunately I couldn't find a solution because the article refers to whom have configured the drive with included software and drivers that came with the drive.
This is not my case, I never used any third party soft ...only OS X disk utility ...
best
marco

Can not log on after successfull installation - SAP Netweaver Trial JAVA

Hello,
I have successfully downloaded and installed the NW Java trial. (NW_JAVA_700SP14_SR3.rar)
I can see in SAP MMC that all the services was started. At http://vjm:50000 I can see the default page.
Unfortunately I can not log on to any page that need SAP authentication (eg. User management, NW administrator),
but can log to pages which needs just basic browser authentication (eg: Web Service Navigator, UDDI client, System Information).
The portal also does not let me log on (http://vjm:50000/irj ).
When I get the standard SAP NW log on screen, after entering Administrator with the correct master password, simply the log on screen appears again (the password field is cleared). I also tried some incorrect user name / password just to check the difference. In that case I got the correct error message.
I installed the software with WMware, Windows 2003 server, allocated enough disk space and 1.6Gbyte RAM. The installation finished without errors. Prior, I installed the MS loopback too (tried without it too). In SAP MMC everything is green, only have an open alert in J2E 00 -> Services -> Security -> Aggregated Data -> Invalid session count "262 > 200 last reported value above treshold".
I am using the standard internet explorer coming with Win2003 server.
Tried the users: Administrator, SDM, Guest, ADSUSER. I know that the password is correct, because I don't get any error if I use it, just getting the log on screen back ...
Could anyone pls help me how can I log on to the system? Or is there any security trace file or log which could help me solve this problem?
I am desperately trying to install this trial, I completely reinstalled the software 5 times but still can not use it
Laszlo

Hi,
is your problem persisting?
CAVE: If you use a wrong user/pw combination > 3 times the account of the user may be locked!
try j2ee_admin instead of administrator or try adm together with your Masterpassword
Do you have to specify the users pw inside the installation procedure? In "normal" installations this has to be done.
If not the pw´s in the documentation of the previous answer`may fix your problem.
The sap mmc is irrelevant for user authentication.
Green means your system is running, nothing else.
kind regards
Tom

Problems running avctl after successfull installation of audit vault

Hi all,
after successful installation of audit vault, I am able to connect to the instance AV with sqlplus and with the dabase console.
But starting the avctl or questioning the status of the avctl with "avctl show_av_status", I always receive the following error:
C:\oracle\product\10.2.2\av_1\jdk\bin>avctl start_av
Exception in thread "main" java.lang.Exception: Invalid Oracle JDBC url
at oracle.av.avca.CommandArguments.setOracleProperties(CommandArguments.java:281)
at oracle.av.avca.CommandArguments.processArguments(CommandArguments.java:667)
at oracle.av.avca.Avctl.startCTL(Avctl.java:70)
at oracle.av.avca.Avctl.main(Avctl.java:318)
OS: Windows XP Prof 5.1 SP2
Audit Vault DB-Version: 10.2.0.3
Had anybody faced this problem before?
Thanks a lot in advance for your answers
Stefan

I had the same error, On the OUI log there was an error on the instalation of the Database Vault (although the installation finished OK), check if you have the same error output:
<LOG>
MANAGE_INSTANCE start RDBMS result=C:\oracle\product\10.2.2\av_1\bin\dvca_start_rdbms.bat,1,
Executing task SQLPLUS_CATMAC
connect SYS:java.sql.SQLException: ORA-01031: insufficient privileges
Executing task UNLOCK_DVSYS
Error executing task UNLOCK_DVSYS:java.lang.NullPointerException
Executing task LOAD_NLS_FILES
Error executing task LOAD_NLS_FILES:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_OWNER
Error executing task ACCOUNT_CREATE_OWNER:java.lang.NullPointerException
Executing task GRANT_CONNECT_OWNER
Error executing task GRANT_CONNECT_OWNER:java.lang.NullPointerException
Executing task GRANT_ADMIN_DB_TRIG
Error executing task GRANT_ADMIN_DB_TRIG:java.lang.NullPointerException
Executing task GRANT_ALTER_ANY_TRIG
Error executing task GRANT_ALTER_ANY_TRIG:java.lang.NullPointerException
Executing task ACCOUNT_CREATE_MANAGER
Error executing task ACCOUNT_CREATE_MANAGER:java.lang.NullPointerException
Executing task GRANT_CONNECT_MANAGER
Error executing task GRANT_CONNECT_MANAGER:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVSYS
Error executing task PASSWORD_CHANGE_DVSYS:java.lang.NullPointerException
Executing task PASSWORD_CHANGE_DVF
Error executing task PASSWORD_CHANGE_DVF:java.lang.NullPointerException
Unable to login to SYS account.. java.sql.SQLException: ORA-01031: insufficient privileges
. Error during post-installation processing. java.lang.NullPointerException. Error during post-installation processing. java.lang.NullPointerException.
</LOG>
Looks like the problem was that I changed sys and system password on the dbca final windows, that maybe wronged the instalation scripts.
When re-installed the AV Server I just press ok on that window without changing any password and it worked.
Hope that Helps.
Alfonso Leon

After Successfull Installation of Photoshop Element 3.0 On Mac OS 10.6.8, Photoshop Elements does not start saying that personalization information is invalid or missing

I have installed Photoshop Elements 3.0 from original disk on my MacBook Pro with Mac OS 10.6.8. The installation was successful. However, when I try to run Photoshop Elements, it does not start, with the message "Could not complete your request because of missing or invalid personalization information". I uninstalled Adobe Elements and deleted all Adobe files from both the System Library Preferences and from the User Library Preference. Then tried the installation again. The installation was successful, but the application fails to start with the same missing/invalid-personalization-information message.
Please advise

I am sorry Invalid Personalization but Photoshop Elements 3.0 requires a PowerPC processor or Rosetta installed in order to function. You can find the system requirements at System requirements | Adobe Photoshop Elements.
You may want to try following the steps listed at Mac OS X 10.6: If you need to install Rosetta to attempt to install Rosetta. That may still not resolve your licensing issue however as the application was also designed for Mac OS 10.2.8 and 10.3.

My flash player is not exsisting after successfull installation, what is wrong?

I got windows 7 -64bit
When my computer asked me to update my adobe flash player to the lastest version 11.1.102.63 with the McAfee extra, something went wrong in the installation. The installation froze and the update never happened.
I went to download the version myself through adobes pages and choose and here also it froze when I had the McAfee too. I tried doing it without the McAfee and it went through, but when the installation is complete I get this message
I tried uninstalling all of flashplayer I could find on the computer, i restarted the computer and tried again, but it still doesn't do anything different.
I can see youtube videos on youtube, but not through facebook, not see flash player based maps or use advanced picture uploaders.
What can I do?
To avoid me having to ask up alot of words, try avoid using short versions of names in your reply Since I am quite bad with this computer language thing
Thanks in advance!

Download the following files:
Windows 64-bit: http://download.macromedia.com/pub/flashplayer/current/uninstall_flash _player_64bit.exe
Windows 32-bit Flash Player for other browsers
Exit browser and disconnect from the Internet.
Run uninstaller and reboot.
Delete the Flash folders in C:\Windows\System32\Macromed and C:\Windows\SysWOW64\Macromed.
Run installer.

After successfull installation problem in startup!

Dear All,
I have installed oracle 11gR1 on centOS. Have also set Oracle Paths.
After this I logged on to sqlplus...
and when I try to startup database I got the following error:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1.0/db_1/dbs/initbssglbrpl.ora'
However file spfilebssglbrp.ora exists in dbs folder.
I tried to create spfile from pfile and error was the same.
How to rectify this error, please guide.
regards, Imran Baig

misterimran wrote:
Dear All,
I have installed oracle 11gR1 on centOS. Have also set Oracle Paths.
After this I logged on to sqlplus...
and when I try to startup database I got the following error:
ORA-01078: failure in processing system parameters
LRM-00109: could not open parameter file '/u01/app/oracle/product/11.1.0/db_1/dbs/initbssglbrpl.ora'
However file spfilebssglbrp.ora exists in dbs folder.
I tried to create spfile from pfile and error was the same.
How to rectify this error, please guide.
regards, Imran BaigHi Imran
Could you post all output from SQL*PLus? If that file is at /dbs folder, then Oracle should find it. Please post the output of the following commands:
ls -lh /u01/app/oracle/product/11.1.0/db_1/dbs/initbssglbrpl.ora
echo $ORACLE_SID
sqlplus "/ as sysdba"
startup
OR
startup pfile='/u01/app/oracle/product/11.1.0/db_1/dbs/initbssglbrpl.ora';

Not able to access KM Content in EP after successfull installation

Hi all,
I had installed CO & CM (EP 6.0 SP2). I was able to access KM Content under Content Management immediately after that. But when i restarted my dispacther and logged into the portal, i was getting this exception in KM content area:
Exception class: class com.sapportals.wdf.WdfException
Exception Message : The URI "null" you tried to navigate to does not exist. It has either been deleted or you have no access rights.
Any idea why this is happening? I had already done the insatllation twice because of this error (after restoring the Backup, ofcourse). Any pointers would eb of great help.
Thanks,
Ramya.

Hi,
Which Patch r u in. We got this error while installing EP6SP2Patch5. did u install correct database patch. Look at SAP Note 523026 -->Exceptions if DB Patch does not correspond to CM coding. Let me know if u need anything else. some more useful CM notes are 742763
Thanks,
Praveen
PS.Dont forget to reward points if useful/solved

Issue after Java Addin Successfull Installation-- com.sap.engine.services.d

com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
Hi All,
Please help me to fix the following issue:
After Successfull installation of Java Addin to ECC 6.0 (SR3,Oracle 10.2,Solaris 5.10) i am facing the following issue when i try to access http://<hostname>:50000/nwa and http://<hostname>:50000/useradmin
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error.
And if i try to access http://<hostname>:50000 it works fine.
I have restarted Java stack and also ABAP+Java Stack but still no luck.
Thanks,
Siva Kumar

Hai,
Check the below links.....
access SLD failed
com.sap.engine.services.deploy.container.ExceptionInfo: Naming error
Regards,
Yoganand.V

Unable to view Logon page for Infoview after successsful installation

Hi,
After successfull installation of BO Edge series on windows 2008 server, i am unable to see logon details in infoview.
When i open with infoview URL, i can see only heading 'WELCOME TO BUSINES OBJECTS' in the page. I am unable to see
user id, password and authentication options. I also installed integration kit without any errors.
What else should i need to do , to get logon details.

see if [disabling IE enhanced security helps|http://blah.winsmarts.com/2008-4-Disable_IE_Enhanced_Security_Mode_in_Windows_2008.aspx]
Regards,
Tim

UFT 11.50 Issue - Unable to Launch the application in VDIs after successful installation

Hi - Trying to Launch UFT 11.50 after successfull installation in VDIs. application is getting crashed, Getting the attached error message. infact tried the options sugessted in the support site, however unble to find the "HP_Unified_Functional_Testing_11.50_RegistrationFailure" file to follow the steps suggested in that document. seems that this file is not getting generated in the temp folder, also searched in all the drives in the VDIs, however could not find this file.
However we are able to lauch the appliation in Local desktops, however this issue is happening only in VDIs.
In VDIs, prompt to enter the license key is not happening.
Please let me know the rootcause and fix for this issue.
Thanks and Regards,
A.Arokiaraj

Hi - Trying to Launch UFT 11.50 after successfull installation in VDIs. application is getting crashed, Getting the attached error message. infact tried the options sugessted in the support site, however unble to find the "HP_Unified_Functional_Testing_11.50_RegistrationFailure" file to follow the steps suggested in that document. seems that this file is not getting generated in the temp folder, also searched in all the drives in the VDIs, however could not find this file.
However we are able to lauch the appliation in Local desktops, however this issue is happening only in VDIs.
In VDIs, prompt to enter the license key is not happening.
Please let me know the rootcause and fix for this issue.
Thanks and Regards,
A.Arokiaraj

After itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

after itunes installation an error message is shown, (itunes could not connect to the iphone, because it is locked with a passcode, you must enter your passcode on your iphone before it can be used with itunes)

Hi ..
Follow the instructions here > iOS: Forgotten passcode or device disabled after entering wrong passcode

After the installation of Lion I don't see the partition with Windows 7. The solution?

After the installation of Lion I don't see the partition with Windows 7. The solution?

Let's be real clear here -- are you saying you are using Internet Explorer and when you try and download Mozilla Firefox it gets around 75% through and shuts down?
If so there is something wrong with your computer -- or at least IE. I rarely, if ever, recommend this, but it might be time to reformat your hard drive and reinstall your OS (if you are even thinking about doing this the first thing you must do is back up all your data files, preferably to writable media like DVDR or CDR).
If you have a friend with a computer perhaps you can get them to download both the latest iTunes as well as (more importantly) the latest firmware updater, and then install them on your machine (they can write them to their own CD).
The other thing that occurs to me is you might not be logged in as admin on that computer -- make sure you are doing this and are the only user.
Otherwise my brain is fuzzy right now -- perhaps someone else can jump in after you reply (I'm right in the middle of packing for a cross country move and only able to spend about five minutes a day on this board).

HT1926 My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

My installation of Itunes to syne my iphone with PC was missing AppleApplicationSupport.msi after 2 installs how can I install such a file do you have a path for this

Hi kensb!
I would recommend that you attempt to reinstall all of the programs and components of iTunes on your machine and reinstall everything again. It can be tricky to get everything uninstalled, so we have an article that can help you make sure you uninstall everything:
Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
http://support.apple.com/kb/ht1925
or
Removing and reinstalling iTunes, QuickTime, and other software components for Windows Vista or Windows 7
http://support.apple.com/kb/ht1923
Specifically, when it comes to uninstalling, you will want to uninstall applications in this order:
Use the Control Panel to uninstall iTunes and related software components in the following order. Then, restart your computer.
iTunes
QuickTime
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)
Important: Uninstalling these components in a different order, or only uninstalling some of these components may have unintended effects.
You will then want to follow the links in those articles to download the latest package of iTunes software for your computer and install again from there. Thanks for being a part of the Apple Support Communities!
Regards,
Braden

OEM12c agent after successfull installation with agent_port firewalled!

Similar Messages

Maybe you are looking for