OEMS/10.1.3.2 MDB/AQ via Resource Adapter - message gone but no "onMessage"
Hi I have a very simple ear file containing an EJB/MDB and a JMS Resource Adapter configured to listen to an AQ, JMS Provider. What I see happening is that messages are gone from the AQ (after some time), I also see some ejb activitiy - enabled via logging - but my onMessage is never called. Was could be causing this?
Things are getting stranger by the minute (for me)
I've just changed my PL/SQL procedure to include at least one of the JMS properties which seem necessary for MDB's to pick things up: JMS_OracleDeliveryMode. With that change, and making sure the rest of the header properties (like username) were in order, I saw my MDB picking up messages that were enqueue via PL/SQL... but.... only if a MDB instance was readily available.
Whenever ejbRemove() was called by the container, entering another JMS message in the queue using PL/SQL didn't result in the onMessage() being called. Message where still available in 'READY' state. Now what is really disturbing is that whenever I called my standalone Java client to enter a new JMS message, obviously this was picked up - but as a side effect every subsequent enqueue using PL/SQL also resulted in onMessage() being called.
Similar Messages
-
When I send a photo via a text message...
When I send a picuture via a text message using my iPhone 5, the text message contains all the photos that I have sent/received from a particular person. Is there a way to stop this so that I only send one picture at a time? I do not think I should have to send a text message that contains multiple pictures every time I send a picture to that same person.
Hello and thank you for using the Palm Help Forums!
Well, there are several things that can cause the device to reset.
One, corrupted data. If you have corrupted data on the device, when trying to access it, it can and most likely will, cause the device to reset.
Two, Low memory. If the device has low memory, the device will operate slow and most likely reset because it doesn't have a lot of free space. The free space remaining on the device is it's thinking room you could say. The smaller the thinking margin, the more likely it will not perfrom correctly. Best way to fix memory issues is to get an SD card and save all media files to the SD card.
Three, incompatible software. If there is incompatible 3rd party programs installed on the device this can cause several problems. Resets, missing data, and other functions not performing correctly.
The best thing I can recommend you do is a hard reset. A hard reset will erase all data on the device but restore all settings to default. Be sure to backup your data on a PC before performing a hard reset. For further information and instructions on how to do a hard reset go to kb.palm.com and look up article number 42094 in the solution ID search field.
I hope this helps and let me know if you have any further questions or issues.
-Pat
Post relates to: Treo 800w (Sprint) -
I rented a movie via Itunes on my PC but half-way through the download recieved a "An unknown error has occured (-50)" notification. This is not my first rental, and I have verified my network and all connections to be good. I have rebooted Itunes and resumed the download of the movie only to receive the same error code. Has the movie file been corrupted? Can I recover the rental even though the time has elapsed? Will I be charged?
Did you figure this out? I haven't rented a movie in this new iTunes yet and saw one tonight I wanted to rent. Same fricken thing is happening to me. I hate this new iTunes, and I really hate that there are problems like this....why the heck do they have to fix something that isn't broken and break it? This just really stinks.
-
I have an iPad 2, and I am sending PDF files to my iPad, via a Hotmail account. But, the PDF arrives to the iPad Mail account already opened at the bottom of the email. Is there a way to prevent this auto-opening of the PDF. I've seen screen shots with the box, and PDF listed inside the box, but mine open automatically. I want to get them into iBooks...?
I am having the same problem and it is even bigger.
When opening a 1-page PDF in iBooks and sending it via mail it is sent inline as preview, but the recipient cannot open the file anymore. Also on iPad and iPhone there is no "open in" possible.
Somehow the mail app does destroy the file. What is going wrong? -
Error while invoking the ABAP Proxy via SOAP Adapter
Hi,
My scenario involves SOAP Client invoking a webservice hosted in PI which in turn invokes the ABAP Proxy asyncronously.
SOAP Client -> PI -> ECC (ABAP Proxy) . This works fine.
Next , I have exposed the ECC Service Interface as webservice using SOA Manager transaction. Now, once the service is created using SOAManager, i replaced the XI Adapter with SOAP Adapter and provided the target URL as the URL provided by the SOAManager.
SOAP Client -> PI -> ECC (ABAP Proxy via SOAP Adapter)
With this approach, i am encountering the below error message
2009-05-29 12:17:55 Error Adapter Framework caught exception: null
2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
Any ideas on the above errror message? Any pointers or inputs will be appreciated.
Thanks,
Vinayak Kamath> 2009-05-29 12:17:55 Error Adapter Framework caught exception: null
> 2009-05-29 12:17:55 Error Delivering the message to the application using connection SOAP_http://sap.com/xi/XI/System failed, due to: com.sap.engine.interfaces.messaging.api.exception.MessagingException.
This is a generic error message which does not have any information about the error which has occurred.
Do you see any error messages in the SOAP client?
Regards
Stefan -
Can't connect via WiFi on one Mac, but another works
One of two iBooks connects to the internet perfectly via an iMac using WiFi, but the other fails. The Network Diagnostics says it fails on "ISP". The promblematic iBook's toolbar Airport dropdown shows the correct network for the iMac with a checkmark.
The iMac's preferences Status panel Says "Self-Assigned IP" under "WiFi" in the list of Networks on the left and says "Wi-Fi has the self-assigned IP address 169.254.99.198 and will not be able to connect to the Internet" under Status (On)..... even though the other iBook connects to the internet via the iMac at the same time!
What is wrong here?
Mant thanks in advance!HACKINTOSH:
Thanks for the reply. I'm sorry for the confusion. Yes, I'm talking about sharing internet service on an iMac with two iBooks. One works, the other doesn't.
After searching on "...self assigned IP address..." I discovered the WiFi password on the iBook that wouldn't connect had an ancient password... for an earlier iMac, I suspect. Updating that seemes to have fixed the problem.... problem solved!
Cheers!!
Dick -
How to Send Appointment via mail adapter
Hi Guys,
I need to send the appointment and vTodo via mail adapter, any way i need to develop a mail adapter module. Till now i have finished this part,and i can send normal mail even normal mail with attachment. But i don't know how to send appointment via mail adapter.
This is payload content of appointment which got from Exchange server to gmail:
_=_NextPart_001_01C71EC0.97A011C6
Content-Type: text/plain;
charset="GB2312"
Content-Transfer-Encoding: quoted-printable
When: 2007=C4=EA6=D4=C227=C8=D5=D0=C7=C6=DA=C8=FD 3:30 =CF=C2=CE=E7-4:00 = =CF=C2=CE=E7 (GMT+05:30) Chennai, Kolkata, Mumbai, New Delhi.
Where: China
~*~*~**
This is calendar content
_=_NextPart_001_01C71EC0.97A011C6
Content-class: urn:content-classes:calendarmessage
Content-Type: text/calendar;
method=REQUEST;
name="meeting.ics"
Content-Transfer-Encoding: 8bit
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+01.00) Sarajevo/Warsaw/Zagreb
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0100
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:20070112T140000
TZOFFSETFROM:+0100
TZOFFSETTO:+0200
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20061213T141132Z
DTSTART;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T140000
SUMMARY:This is calendar test
UID:040000008200E00074C5B7101A82E0080000000030D51864C81EC701000000000000000
010000000CA9F127EA8947844BC4DD47F269BDEA9
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky":MAILTO:rocky@***.com
ORGANIZER;CN="Xu":MAILTO:rocky@**.com;roc*@gmail.com
LOCATION:Shanghai
DTEND;TZID="(GMT+01.00) Sarajevo/Warsaw/Zagreb":20070112T160000
DESCRIPTION:This is calendar content\N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20061213T141132Z
LAST-MODIFIED:20061213T141133Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
X-MICROSOFT-CDO-OWNERAPPTID:367904726
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20061213T141132Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20061213T141132Z
END:VEVENT
END:VCALENDAR
_=_NextPart_001_01C71EC0.97A011C6--
My question is
1. How to generate this kind of payload in mail adapter module?
2. It is possible to send appointment via mail adapter?
Following i can get from other system, even using mail package check or not using mail package check.
BEGIN:VCALENDAR
METHOD:REQUEST
PRODID:Microsoft CDO for Microsoft Exchange
VERSION:2.0
BEGIN:VTIMEZONE
TZID:(GMT+08.00) Kuala Lumpur/Singapore
X-MICROSOFT-CDO-TZID:21
BEGIN:STANDARD
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:STANDARD
BEGIN:DAYLIGHT
DTSTART:16010101T000000
TZOFFSETFROM:+0800
TZOFFSETTO:+0800
END:DAYLIGHT
END:VTIMEZONE
BEGIN:VEVENT
DTSTAMP:20070608T025852Z
DTSTART;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T110000
SUMMARY:This is meeting request with attachment
UID:040000008200E00074C5B7101A82E0080000000000A9BD0BA7A9C701000000000000000
010000000C5E16D144D1612498C0EF7E2115EFEC4
ATTENDEE;ROLE=REQ-PARTICIPANT;PARTSTAT=NEEDS-ACTION;RSVP=TRUE;CN="Xu, Rocky
":MAILTO:roc*@**
ORGANIZER;CN="Xu,y":MAILTO:roc*@**
LOCATION:India labs
DTEND;TZID="(GMT+08.00) Kuala Lumpur/Singapore":20070608T113000
DESCRIPTION:This is content! <<shanghai.txt>> \N
SEQUENCE:0
PRIORITY:5
CLASS:
CREATED:20070608T025925Z
LAST-MODIFIED:20070618T033505Z
STATUS:CONFIRMED
TRANSP:OPAQUE
X-MICROSOFT-CDO-BUSYSTATUS:BUSY
X-MICROSOFT-CDO-INSTTYPE:0
X-MICROSOFT-CDO-INTENDEDSTATUS:BUSY
X-MICROSOFT-CDO-ALLDAYEVENT:FALSE
X-MICROSOFT-CDO-IMPORTANCE:1
ATTACH:CID:008501c7b159$a9d41d3b$_CDOEX
X-MICROSOFT-CDO-OWNERAPPTID:1468557271
X-MICROSOFT-CDO-APPT-SEQUENCE:0
X-MICROSOFT-CDO-ATTENDEE-CRITICAL-CHANGE:20070608T025852Z
X-MICROSOFT-CDO-OWNER-CRITICAL-CHANGE:20070608T025852Z
END:VEVENT
END:VCALENDAR
Thanks & regards
RockyHi
have a look at this
You can use Java/ABAP proxies to do this job for you..
Java Proxy >> will read the mail(with the attachments) with the help of Java APIs and send the message into XI ABAP Proxy >> for this you will have to first convert the attachment into a message and then you can proceed in the regular fashion.
Not all adapters can process attachments, I'm not sure why you are having trouble with using module processor in the mail adapter. Just check if the service pack that you are using supports this feature.
If you are on WAS 6.10 and above you can achieve this and there is an excellent weblog by Thomas Jung on this topic at
/people/thomas.jung3/blog/2004/09/09/receiving-e-mail-and-processing-it-with-abap--version-610-and-higher
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/6d967fbc-0a01-0010-4fb4-91c6d38c5816
reading Pdf Through mail easly done with Java Proxy, which will read the mail(with the attachments) with Java APIs and send the message into XI and then map with the Target ABAP proxy structure .
Thanks -
Is it possible to connect a USB pen drive to ipad 3 via and adapter?
Is it possible, via an adapter, to connect and access documents on a USB pen drive on an iPad3?
Technically, you can use the camera connection kit to attach certain USB drives to the iPad. That said, the ONLY thing your iPad will see are photos or movies that are named with 8 characters and located in a DCIM folder.
So technically you can attach a USB, however it does not work for documents, only photos or videos.
There are some wireless drives out there, the Seagate GoFlex and the iDrive and some others, but definitely with the Seagate it's often just that you can read from or pull from the drive, you can't put your document back onto the drive to get it off the iPad. -
I have my Kurzweil connected to my MacBook Pro via an adapter (old style MIDI from Kurzweil to USB adapter connecting to Mac). The Kurzweil has a baffling array of buttons and possible MIDI channels. Can anyone please tell me which of the channels I should use? Also, should I leave the MIDI In cable out of the Kurzweil? Thanks for as detailed an answer as possible. If you like you can respond directly to me at [email protected]
First of all I do not own this keyboard. But a quick look at the manual (found on the internet) says that when first powered up the SP88 is in Internal Sounds mode. Meaning you hear the sounds selected when playing the keyboard. It also stated that the default Midi Transmit Channel is Midi Channel #1.
Looks like you would need to go to the SP88 Keyboard's MIDI SETUP and simply select LOCAL OFF. Now the keyboard should be ready to transmit Midi Out only and no internal sounds should be heard.
Next you may or may not need to do this but you might need to go into the Utilities Folder found in your Applications Folder on your Mac and double click AUDIO MIDI SETUP the keyboard Icon. Figure #1 below.
Next you need to make a physical connection from the Midi Out of the SP88 to the Midi In on your Midi Interface. Figure #3 below. You may need to Click on Add Device first. Figure #2 below.
In the examples shown below I have a Yamaha Electronic Drum Kit that is Midi Out only... not USB out. I had to plug a Midi cable from the Midi Out Port on the back of my Drum Module to the Midi In Port on the back of my Motu 828 Audio Inferface which is connected to my Mac. Next I created the Audio Interface and Drum Module "Devices" as mentioned above.
I then double clicked on the Drum Module and made my Midi Out Selections. Figure #4 Below. And once it was setup and the icons closed I used my mouse to draw a virtual cable connection from the Drum Module Out to the Audio Interface In. Figure #3 below. This is how I got my Midi Devices to talk to one another.
Once you have made your setup as I have outlined create a MIDI Instrument Track in Garageband, select an instrument for example a Piano then Record Enable that track in Garageband and see if you now hear what you are playing. In this example the SP88 is a Midi Controller only and you will only hear sounds selected in Garageband which is what you want.
Keep in midi your setup may be different than mine. You can keep your SP88 Keyboard on the default Midi Channel #1. That would be a good place to start. Garageband receives Midi on all channels. -
I have a MacBook with OS X 10.5.8 and I purchased a Mtn Lion OS up grade and it keeps telling me to install via the Mac App Store, but I can't get the Mac App Store installed on the MacBook it wants at least 10.6.6 so I seem to be stuck . Help
ChuckPhilyaw wrote:
I have a MacBook with OS X 10.5.8 ...
The first step in Upgrading... is to Snow Leopard = OS X 10.6.x
It is Not available as a download... It is a Paid Upgrade.
Do this first...
Check that your Mac meets the System Requirements for Snow Leopard...
Snow Leopard Tech Specs > http://support.apple.com/kb/SP575
If so... Purchase a Snow Leopard Install Disc...
http://store.apple.com/us/product/MC573Z/A/mac-os-x-106-snow-leopard
After the Successful Install, run Software Update to get the latest updates for Snow Leopard and iTunes.
Be sure to make a Backup of your Current System Before Upgrading... -
Hi - I created a form in Adobe Livecycle and have a button on it to send the form via email. It worked, but only for those with PC. However, I could not get it to work with Apple loaded with Yosemite even with reader installed . Is there a way i can make it work for apple / Mac? It worked fine on a mac using Mountain Lion and reader
ThanksLiveCycle = XFA forms.
afaik - These cannot be used in Apple OSs.
Be well... -
How to stop and start MDBs to listen for JMS messages
Hello! This might be more of an architecture question rather than a technical questing, but I post it here, in the lack of a better place...
For several years I have been using Webster and Webster MQ to send messages back and forth to clients. The architecture for the middleware platform has been designed around the functionality of ListenerPorts. Listenerports is a Webster functionality that let you "stop" and start to listen to JMS messages for a given MDB either by admin console, or by JMX.
The arhitecture we used was something like this :
1.Client sends a persistent message to a queue. (order)
2. An MDB pics up the order message, calls a SessionBean that "fronts" the IIOP back end system.
This is quite "out of the box" architecture, but we used the Listenerports to solve a stability problem for our back end system.
The backEnd system was quite unstable, so the EJB threw an exception (typically because of timeout or connection refused) back to the MDB.
The Listenerport was "defined" to handle 3 errors before stopping, so the MDB resent the message twice before the listenerport automatically stopped. The nice thing about this feature was that the client could continue to send orders, and was not bothered when the back end system was down.
When the backEnd system was up and running, we could start the listenerport and it was all back to normal state. We even had a start script that checked the state of the listenerport every 30 minute, and started it automatically if it was stopped, making the admin task of starting the MDB unnecessary..
Now.. Why am I telling this story..
I would like to know how this could be done using "clean" J2EE technologies..That is..Not using any technology that is not portable..
I`m playing with glassfish at home, and it struck me that there is nothing in the J2EE spec that defines the functionality described above ? Am i missing something ?
I Do not want to stop My application because the back end system is down? That is the only way (i know of) that i can "stop" to listen for messages..
I can put all the messages on an error queue when the backbend system is down, but that would lead to more code just to handle the error messages. Maybe the easiest way to solve this is to "move" (programmatically) all messages from the error queue over to the "standard" queue every XX minute, but somehow that sounds "wrong"
Can anyone give me some advice to how this problem situation should be solved ? I`m interested in the solution both from an architectural perspective and from a more technical perspective..
Best regards
Hans-Jacob MelbyBreakpoints, whether normal or conditional, are just meant for debugging of your code. I had the sense from your question that the pausing you want to do is a part of normal operation of your code. I would NOT recommend using a breakpoint for that situation. It would bring up the block diagram showing the breakpoint when it occurs. A user besides the programmer would not know what to do in that case.
Yes, both the inner and outer loops would have shift registers.
Putting a case structure with a small while loop inside the "Pausing Case" is doable. It just depends on what you are doing or waiting for while the program operation is "paused". -
Hi - I recently purchased a new iMac. I have a registered cs5 design premium package which is an upgrade - I have no disc for cs4 but have the qualifying serial number for it. I have installed cs5 via download onto my iMac but it is not accepting the serial number. Can anybody help. Does anybody else think that Adobe will loose a lot of customers by not providing any chat or call support for cs5 users??
You can support serial number and activation support.
Mylenium -
I have Windows XP / bootcamp and can connect to the internet via Wi Fi (Apple Express) but when I try to open Int. Explorer I get a message "cannot connect" yet my computer is connected with a strong signal. I checked to make sure IE is not off line. Any suggestions please?
Try using a different browser as a test.
-
Late Macbook Pro 2011 won't charge via MagSafe adapter.
My friends Macbook Pro 2011 same as mine wont charge the battery via MagSafe adapter. The battery is good and the adapter also, ive checked them on my Mac. The problem is that on her Mac it won't charge. I've change the MagSafe adapter on her computer and it didn't work still no charge, no green light on the L shaped adapter. Can it be the Logic Board?
Resetting SMC could solve the problem.
Intel-based Macs: Resetting the System Management Controller (SMC) - Apple Support
Maybe you are looking for
-
Getting Runtime error while adding Second page in Smartform.
I added 2 pages in smartform. When I worked with single page. smartform working properly. Now I added one more page(i.e Second page) I am getting runtime error. ("The current ABAP/4 program encountered an unexpected situation". A RAISE statement i
-
I just downloaded lion how do I install it on my other iMac and Mac books.
And how many computers can I install them on? Thanks.
-
Copy and paste issues - numbers for Ipad
Since my Numbers for Ipad last updated I cannot copy and paste an interval of cells to my Gmail App, so I can email. It used to work in the orevious version. What should I do?
-
Recently i bought Apply Ipad Air but after making apple i.d i can't be able to sign in anywhere its showing the password is incorrect then i changed my password again its showing password is incorrect and i know m typing correct password so plz help
-
ORA-00119, ORA-00132, ORA-01078 problems in dbca -datafileDestination /u02
Hello, I have gone through the entire 9i RAC procedure for Redhat AS 2.1 - i am now running dbca -datafileDestination /u02 as the last step - but i get these errors below, and if i ignore i get lots of ORACLE not available errors ORA-00119: invalid s