OEPE Install for Solaris Sparc 64 bit

Hello Experts,
OEPE (Oracle Enterprise Plug-in for Eclipse) issue....
We have installed the below @ Sun Solaris 10, Sparc 64 Bit.
Web Logic 10.3.6
SOA 11.1.1.6.0
AIA 11.1.1.6.0
trying to install OSB (Oracle Service Bus) and it asks about the OEPE Install location and gave an error.
INST-07246 -- Enter a Valid value for OEPE Home location..
We have NOT installed OEPE, because it is NOT available for the version and the platform we have.
The OTN doc says as below:
Oracle WebLogic Server 11gR1 (10.3.6) + Coherence - Package Installer Size: .99 GB, Check Sum: 3179053739
This download provides a WebLogic Server generic installer. This installer does not include a JVM/JDK or Oracle Enterprise Plug-in for Eclipse, these must be installed separately.
Question(s):
1) Where can I get the OEPE for Solaris 64 bit and SOA 11.1.1.6.0?
2) Any other workaround for the OSB install issue??
Thanks a lot
Rgds
Natrajan

Hi Natrajan,
I don't think there is a Oracle packaged OEPE for Solaris 64... There is a Linux 64 though, but I don't think that is what you looking for...
Here you can see the available packages
http://www.oracle.com/technetwork/developer-tools/eclipse/downloads/index.html
What you can do is to install Eclipse for Solaris... and then go to the link above and download a package "OEPE Plugins Only" and apply the plugins to your Eclipse
http://archive.eclipse.org/eclipse/downloads/drops/R-3.6-201006080911/solPlatform.php
Cheers,
Vlad
It is considered good etiquette to reward answerers with points (as "helpful" - 5 pts - or "correct" - 10pts)
https://forums.oracle.com/forums/ann.jspa?annID=893

Similar Messages

Will Instant Client 10.2.0.1 be available for Solaris 32-bit (SPARC)?

The latest Instant Client release is currently not available for Solaris Sparc 32-bit.
Does anyone know when it will be available?
Thank you.

It is available now.

How can I install Oracle Database 10g for Solaries (SPARC) from the console

Dear Forum Members,
In my office, I have to installed Oracle Database 10g for Solaries (SPARC). But I have to do it without DISPLAY Monitor.Is it possible install it by remote login to this server using response file (silent mode) or something like that?
If yes. Then How?
If anyone have the exact solution, then I need your feedback. I shall wait for your reply.
Thanks
Aungshuman Paul

There are 2 possible ways to accomplish this.
First,
Silent installation
http://www.informit.com/articles/article.asp?p=174771&rl=1
Second, (cut/paste from other site)
How to install Oracle software remotely?
Remote Software Installation Steps: (For Solaris only)
If you want to install Oracle Software remotely, you should perform the following steps. These steps are applicable only if your source and target machine are running Unix.
For example, you can install Oracle Software from your home from Washington, DC to a target source in California.
1. Pick your source server or machine for remote installation.
2. Check that your CD is in your source CD-ROM drive.
3. On the target machine, find your target machine name with the output of the /usr/bin/hostname
4. On the source machine, login as a user.
5. On the source machine, enable client access: % /usr/openwin/bin/xhost + target-machine-name
6. Become root user by typing: su (dont use -)
7. Check that Volume Manger is running. # ps ef |grep vold (if you see an entry that contains /usr/sbin/vold, Volume Manager is running. Then skip to Step 10.
8. If not then do the following: # mkdir p /cdrom/your-cd-file-name
9. # mount F hsfs r cdrom-device /cdrom/your-cd-file-name
10. Add the following line to your /etc/dfs/dfstab file: # share F nfs o ro /cdrom/your-cd-file-name
11. Verify whether your source machine is an NFS server: # ps ef | grep nfsd
12. If you see an entry that contains /use/lib/nfs/nfsd a 16, then nfsd is running and skip to Step 16.
13. If nfsd is running, then type: # /usr/sbin/shareall
14. If nfsd is not running, then start nfsd by typing: # /etc/init.d/nfs.server start
15. Verify whether your source machine is an NFS server again by typing: # ps ef | grep nfsd
16. Make sure your source machine is exporting your product directory by typing: # /usr/sbin/dfshares
17. Now, log in to the target machine by type: # rlogin target-machine-name l user (not root)
18. Then log in as the root user by typing: # su
19. Go to the source machine by typing: # cd /net/source-machine/cdrom/your-cd-file-name ,then Skip to 24.
20. If you cannot change to that directory in Step 19 and you do not have an auto-mounter on your network, then create amount point by typing the following commands.
21. # mkdir /remote_products
22. # /usr/sbin/mount F nfs r source-machine:/cdrom/your-cd-file-name /remote_products
23. # cd /remote_products
24. Redirect the target machine display to source machine by typing: # DISPLAY=source-machine:0; export DISPLAY (if you use a Bourne or Korn shell).
25. Start the Web Start Installer by typing: # ./installer (or whatever the installer name program is).

Can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit??

I can't download Oracle 8.1.7 Enterprise Edition for Solaris 32 bit. After filling out the form with the questions...I click on the actual link, but the box never pops up. The status bar on my Internet Explorer slowly increases, but never allows me to download. It just hangs. I have tried multiple times, and I can download other verions from your site...and have many times in the past. Could you please fix this. Thanks.

I've looked at it and it seems fine. It might have been a temporary glitch - let us know if you continue to have trouble.
OTN

OEM 12c for solaris (sparc) disk2 download failed

I am trying to download OEM 12c for solaris (sparc) from below link but disk 2 download failed after 80% with a error saying connection to server closed. I tried it couple of times with different browsers even from different machine but still same error. Disk 1 downloaded successfully but disk2 always failed right at 80% after 2.4 GB downloaded. It makes me belive that it is a problem related to source file or server. Anyone has similar experience and know how to get it solved?
Appriciate for your help.
http://www.oracle.com/technetwork/oem/grid-control/downloads/solsoft-094433.html

I can't download it either, and nor can any of my colleagues, using any browser. I am in UK, I suspect there's an issue with the Oracle mirrors, and that if you are downloading from US it probably works fine. Can someone from Oracle investigate this please?
We consistently get the same result: the downloaded file is: 2,732,571,489 bytes, rather than 3,430,333,041 bytes. It will not unzip as it is not a valid archive, error message:
bash-3.2# unzip em12_solaris_sparc64_disk2of2.zip
Archive: em12_solaris_sparc64_disk2of2.zip
End-of-central-directory signature not found. Either this file is not
a zipfile, or it constitutes one disk of a multi-part archive. In the
latter case the central directory and zipfile comment will be found on
the last disk(s) of this archive.
unzip: cannot find zipfile directory in one of em12_solaris_sparc64_disk2of2.zip or
em12_solaris_sparc64_disk2of2.zip.zip, and cannot find em12_solaris_sparc64_disk2of2.zip.ZIP, period.
However, this error message is caused by an invalid / incomplete zip file.
I have also tried Oracle Edelivery site with same result.
TIA!

Latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems download.

Hi All,
I hope someone can assist as this has given me a headache for the last few days.
I require the latest (November) EIS-Patching ISO for Solaris SPARC & X86 systems.
I require the ISO and not just the Patch set.
Please advise.
Kind regards,
Paul

The current ISO (october) is available at the usual place : EIS for Partner
And for information, the next planned EIS will be available very soon but not this month.

When will 11.1.0.7 will be available for Solaris (SPARC) (32-bit)?

Hi
Does any of you know when 11.1.0.7 for "Solaris Operating System (SPARC) (32-bit)" will be available for download on http://www.oracle.com/technology/software/tech/oci/instantclient/index.html ?
The reason for my question is that 11.1.0.6 contains a bug (at least on Solaris) causing it to reserve approx 180M swap for each client started!
Regards
Mads

Just became available on http://www.oracle.com/technology/software/tech/oci/instantclient/htdocs/solsoft.html

Java 1.8.0_31 for Solaris Sparc missing Firefox plugin

Until now I didn't realize that Oracle planned to deprecate (Oracle) Solaris in favor of Linux.
Since updates to Java 7 will be ending in April 2015, I thought it would be a good idea to migrate to Java 8. I installed Java 1.8.0_31 on our Solaris 10 server and then tried to configure the Java plugin for Firefox. Low and behold! It is no longer supplied with the Java installation. Apparently, when Oracle removed 32-bit support for java in Solaris, they removed Java Web Start (javaws.jar) and the Firefox plugin (libnpjp2.so) with it. As I searched the web in vain for a solution, I recall that additional java functionality has been removed from the Java 8 build for Solaris as well, but I can't recall what they are right now.
Of course, Linux remains fully supported!! Too bad we invested in an all-Oracle solution for our aging Oracle Forms applications. I guess now we need to stay on Java 7 until we can migrate off the high performance (Oracle) Solaris dinosaur to a better supported Linux platform. Thanks Oracle for providing no risk solutions.
I've submitted a ticket to Oracle Support regarding how to get past this issue, but I thought I'd throw it out here too:
How can I run a java app (like Oracle Forms) using Firefox on Solaris without a Java plugin?

Obviously Sun (excuse me, Oracle) does not intend to support the solaris-10/sparc/firefox-3.6 combination. Firefox 3.6 requires the NPAPI and/or NPRuntime interfaces to java, but oracle does not provide the new "libnpjp2.so" java plugin with the jre-6u18-sparc-solaris java download.
A search at www.oracle.com does not turn up any support announcement about this. You have to learn it the hard way. :(
If you want to continue to use sparc-solaris, downgrade to firefox-3.5 so you can use the old libjavaplugin_oji.so module. Otherwise run Linux or Mac OS X to stay in the unix camp.

Bundle Patch1 is now available for Solaris (SPARC), Solaris (x86-64), AIX

[OTN |http://www.oracle.com/technetwork/oem/enterprise-manager/downloads/index.html?origref=http://www.oracle.com/technetwork/oem/grid-control/index.html] Hi All,
EM Binaries updated with bundle patch1 are now available on OTN
OMS and Management Agents for platform ::: Solaris (SPARC), Solaris (x86-64), and IBM AIX (64-bit)
Management Agents for platform::: HP-UX, or HP-UX Itanium
The BP1 workbook is updated with various use-cases specific to these platform. We strongly recommend you to follow the instruction from the workbook to apply BP1 patches. If you have any doubts feel free to drop me an email.
http://docs.oracle.com/cd/E24628_01/doc.121/e35229/toc.htm
Regards
Akanksha

Oracle Instant Client was a "feature" introduced with Oracle 10g. There is no 9i version.
Code that links with Oracle 9i libraries should be able to be linked with Instant Client 10gR2.
The resulting application will be able to connect to databases from Oracle 8.1 onwards.

Where do I download Oracle ESB 10.1.3.4 for solaris sparc?

Hi,
Where can I download Oracle SOA Suite ESB 10.1.3.4(only ESB, BPEL is not required).
I could find the following link:
http://www.oracle.com/technology/software/products/ias/htdocs/101310.html
which has Oracle Enterprise Bus 10g (10.1.3.1.0). What is the patch number for upgrading this to 10.1.3.4?
I believe we get latest Oracle Apps and database adapters out of box with ESB 10.1.3.4. If not please suggest me where I can get these.
Also I need an SAP adapter which is not given by default with ESB 10.1.3.4. Please suggest me where I can download this from and how I install it.
Please give me the links for downloading
Oracle SOA ESB
version - 10.1.3.4
Operating system: Solaris Sparc
Adapters: SAP, Oracle Apps and database.
Thanks.

Thanks Marc.
I was not able to find the patch on metalink. Could you please give me the patch number specific to only ESB 10.1.3.4 if you have.
I have the 10.1.3.4 patch number(7272722) for the complete SOA suite.
Also please comment on adapters part.
Thnaks.

From where can I download oracle9i 9.2.0.x for solaris sparc 5.10 64bit OS?

or even for an earlier OS version such as Solaris 8, 9?
from where Can I find certification matrix?

The regular Oracle9i Database Release 2 Enterprise/Standard Edition
for Sun SPARC Solaris (64-bit) works fine. This can be downloaded Here.
Hans has already posted the URL for the certification matrix.
You'll see there a "Desupported" status. Dessupported means in case a new bug is found for the specified platform/DB Oracle won't develop a patchset. In fact, the latest and last patchset released by Oracle is 9.2.0.8.0, from this point on the only maintenance code will be done through CPU's for this specific patchset level. However if you can check the First year Extended Support fee waived for Oracle9i Database Release 9.2, and the Oracle Lifetime Support Policy.
~ Madrid.

Oracle 11g install for WinXP 64-bit - is 32-bit client needed?

I just saw that the WinXP 64-bit version of 11g is now available.
Does anyone know if it is necessary to install both the 64-bit Database and 32-bit Client on the same machine for a development server. This was the procedure for 10gR2 as the 64-bit ODBC drivers would not work with 32-bit ODBC apps.
Thanks!

I submitted a TAR/SR on MetaLink...
Yes... you need both.

10.2.0.3 Patch for solaris SPARC

Hi All,
We have 10.2.0.1 database running on Solaris Sparc.We are planning to upgrade to 10.2.0.3 directly instead of upgrading to 10.2.0.2
Do we have the patch 10.2.0.3 ready to dowload from the metalink..
If so please give me the patch number..
Thanks In Advance for the reply ASAP

Have not seen any fixed dates regarding the release of the 10.2.0.3 patchset. Searching Metalink showed some forum answers that suggest sometime in December 2006.

Tripwire for Solaris SPARC

Has anyone ported a recent version of tripwire to Solaris SPARC? A quick attempt at the makefiles indicates it's not ready for anything but Intel boxes (Linux and Solaris). We've looked at aide, but it doesn't seem as security since the configuration flies aren't encrypted.
Thanks!

Most commands are identical. Performance analysis, loading all are similar. Tape interaction, creation of tape devices is going to be pretty much the same.
The differences show up a lot at the hardware level. HBAs aren't usually the same, many drivers (and their quirks) are different between the architectures. If you're debugging connectivity to a tape library, those differences may be critical.
So you can't get as close as you may want, but I'll bet it would still be helpful.
Darren

Acrobat 9.1 for Solaris Sparc

Hi,
Have to start with, thanks for the 9.1 on Solaris x86 port, much needed since we where using version 4 which started to become old...
But, we are still very much on Solaris Sparc, when is 9.1 planned to be be released since I would like to have the same version on both platforms.
once again, thanks for 9.1
Michael

Hello Michael/Karl,
In 9.1, there is no SPARC release, only x86.
The latest SPARC compatible Adobe Reader version is 8.l.4
We will keep you posted if any more developments arise.
You may also visit our blog site (http://blogs.adobe.com/acroread/) to read about latest announcements/sneak-peaks etc.
Thanks
Atanu Dhar
adharATadobeDOTcom

OEPE Install for Solaris Sparc 64 bit

Similar Messages

Maybe you are looking for