OEPE Release 11gR1 (11.1.1.4.0) doesn't work with WLS 10.3.4

Hello All,
The OSB Release 11gR1 (11.1.1.4.0) doesn't install with WLS 10.0, and it seems to be installed sucessfully with WLS 10.3.4.
Now, when trying to create a server in OEPE Release 11gR1, it complains as it requires WLS 10.0 binary!!
Big confusion when you try to use these new versions.
Any hint, direction?
Regards,
Ragae

The OSB Release 11gR1 (11.1.1.4.0) doesn't install with WLS 10.0, and it seems to be installed sucessfully with WLS 10.3.4.Yes, it is because WLS 10.0 is 10g release and Weblogic 10.3.4 is 11g R1 release. Morever, OSB 11.1.1.4 (OSB 11g R1 PS3) is compatible with Weblogic 11g R1 PS3 (10.3.4) only.
Now, when trying to create a server in OEPE Release 11gR1, it complains as it requires WLS 10.0 binary!!OEPE supports the following versions of Oracle WebLogic Server:
11g Release 1 Patch Set 3
11g Release 1 Patch Set 2
11g Release 1 Patch Set 1
11g Release 1
10g Release 3
10.0
9.2
Note that there is limited support for versions 9.1, 9.0, and 8.1.
While creating a server in OEPE choose appropriate server version in "Server Type" option.
Regards,
Anuj

Similar Messages

Firefox 3.6 doesn't work with VMWare Virtual Machine Console Plug-in but IE does. Previous versions of FF worked fine. Will this be fixed in a new FF release?

When I try to open the Virtual Machine console I get the error:
Cannot access virtual machine console. The request timed out.
I had no problem with this until Firefox did an upgrade to 3.6 and now it doesn't work and I have to use IE to open the console.
I can see lots of other people have this same problem so am wondering when it will be fixed.

Look at this blog post for some work arounds for the windows version.
http://planetvm.net/blog/?p=1316

Does apple have a suggested procedure to release a Verizon iphone 4s so the modem will work with Tmobile?

I really don't like having to "jailbreak" my wife's phone. I was wondering if there was a more legitimate way to get this to work.

Apple has nothing to do with it. You can not use a Verizon iPhone 4S on any U.S. carrier other than Verizon.
The SIM slot can be unlocked for Verizon customers in good standing, but it will ONLY work with non-U.S. carriers.
If you want to use T-Mobile in the U.S., you will need to purchase an unlocked GSM iPhone.

When you will release a new java update ? With the last it doesn't work correctly ( java 3d )

I use java 3d, but with the last update it doesn't works with any browser

"When you will release a new java update ?"
"We" don't release anything; we're not Apple, we're just users like you.
Use the feedback form to send queries to Apple.
http://www.apple.com/feedback/macosx.html

When will a Lightning update that works with Thunderbird v31.0 beta be released?

I was using Thunderbird v 30 beta with Lightning 3.2b1 and it worked great. Thunderbird v31 was issued, and automatically updated. Add-ons are set for "automatic update". Everything in calendar is now grayed-out, and nothing works. I searched the Lightning downloads and found that Lightning 3.2b1 is the latest version offered, and that Lightning 3.2b1 states it is for "Thunderbird 30.0 and later". Obviously, Lightning 3.2b1 doesn't work with Thunderbird v31.
Two things:
1. I recommend that Lightning updates be released prior to the release of Thunderbird beta updates so that your testers who utilize the Lightning add-on have the full capability they had prior to the Thunderbird update(s), and
2. There should a) be a notice sent with updated beta versions of Thunderbird that states whether or not they will properly interface with the currently-installed version of Lightning, and/or b) the update should not be allowed to automatically update if it detects an installed Lightning add-on with which it is incompatible and require the user to decide whether or not the user wants to proceed with the update and lose functionality.

Steven is right: while it is appreciated that there is a workaround, the current procedure - upgrade TBird, restart TBird, see that Calendar is broken, think of the right search keywords, find a solution online, download, install, restart TBird - leaves a lot to be desired, to say the least. And this reocurrs every few/several months.

FF 3.6 no longer works with ebay,vodafone etc when is new release likely?

No longer works with these and other sites . Would like to know when new version will be released, will have to use IE until then..

* "Clear the Cache": Tools > Options > Advanced > Network > Offline Storage (Cache): "Clear Now"
* "Remove the Cookies" from sites that cause problems: Tools > Options > Privacy > Cookies: "Show Cookies"
Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
* Don't make any changes on the Safe mode start window.
See:
* [[Troubleshooting extensions and themes]]
See also http://kb.mozillazine.org/Error_loading_websites

Why CUA (Release 7.00) is Not Working with Old Clients(Release 4.6C, 4.5B)?

Hi all,
We have CUA (release 7.00) that is not working with older release clients. I implemented 2 release 7.00 clients to CUA; they both work fine. However, when I implement some older release clients (like, 4.5B, 4.6C, 6.20 and 6.40) to CUA, I can only create ID and pull out to client, but roles do not go through.
It is kind of argent.
Do anyone know how to fix it????
Thank you for reading this.

> It is kind of argent.
I think you meant "ardent"...
THe word u r g e n t is blocked by our content filters, because a while back everything was like that and these forums are actually discussion forums...
Anyway, sounds like faulty config or perhaps a problem with logical system assignment.
Have you checked that? Also check in SCUL?
That you can create users but not assign roles might also be that in the lower release systems they are checking activity 22 (assighn) AND 02 (change) to assign the role. Doesn't make sense, really....
Check the drop down menu in table PRGN_CUST for the option to change this, and compare whether the settings are different.
Cheers,
Julius
Edited by: Julius Bussche on Jul 30, 2009 11:34 PM

[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

When selecting a menu item I used to click the left mouse button and hold it down, move the pointer to the desired menu item and release the mouse button. Everything works fine in the mine menu, but there's a problem when adding new adjustment layer from the layer panel: when I release the button nothing happens, I have to press the button again. In previous PS version it worked fine. How can I fix this?

I don't think that is user fixable, meaning you'll have to wait till adobe fixes it with an update.
Photoshop cc 2014
windows does not work
mac does work
Did you already post over here:
[Photoshop CC 2014] Click&hold-move-release doesn't work when adding adjustment layer from the layer panel

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long. I purchased a 3 banded AV extension but it doesn't work. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

I recently purchased a shutter release remote for my IPAD camera but the cord is only three feet long and I need an extension cord. I purchased a 3 banded AV extension but it doesn't work. I have been told that I need an extension cord that has AV and Mic to enable the remote shutter release to work with the extension cord. Can anyone tell me what the correct extension cable is and where I can find one? Thanks.

Greetings,
I've never seen this issue, and I handle many iPads, of all versions. WiFi issues are generally local to the WiFi router - they are not all of the same quality, range, immunity to interference, etc. You have distance, building construction, and the biggie - interference.
At home, I use Apple routers, and have no issues with any of my WiFi enabled devices, computers, mobile devices, etc - even the lowly PeeCees. I have locations where I have Juniper Networks, as well as Aruba, and a few Netgears - all of them work as they should.
The cheaper routers, Linksys, D-Link, Seimens home units, and many other no name devices have caused issues of various kinds, and even connectivity.
I have no idea what Starbucks uses, but I always have a good connection, and I go there nearly every morning and get some work done, as well as play.
You could try changing channels, 2.4 to 5 Gigs, changing locations of the router. I have had to do all of these at one time or another over the many years that I have been a Network Engineer.
Good Luck - Cheers,
M.

PO Release Strategy not changed after deletion of few line items with less

Subject : PO Release Strategy not changed after deletion of few line items with less Total PO
Dear Friends
We have issue with PO Release strategy. We have created the PO. with release strategy with multiple approvers. After approval of first approval manager , one of the PO line item got deleted and Total PO value is reduced . The new PO value should have changed the PO release strategy. But it is not changed. Old release strategy only showing in the PO which is wrong.
Details of the PO
PO no 4500000123 with 5 line items Total PO value : 100,000 USD Release strategy : AB
PO line item 5 deleted. Now total PO value changed to 50,000 USD and the PO release strategy should have been changed to AA but not changed. Still showing PO release strategy AB only.
Are there any OSS notes available to correct his bug.
Please let me know if you need more details
Thanks in Advance
Thanks
MVS

Hi,
release indicators change it to 4.It may works. Please explore to all 6 indicators..........
i.e,
1-cannot be changed
2-changable,no new determination of strategy
3-changable,new release in case of strategy
4-changable,new release in case of strategy or value change
5-changable,new release if new strategy/outputted
6-changable,new release if new strategy or value changed/ outputted......
And check Characteristic description and value in Classification of Release strategies ........
I hope this will help you. Thanking you.
Regards,
Venkat.

A little uncanny situation since release of FIREFOX RC is that 'Reload option which used to come under view option is no longer visible,but appears as an icon in toolbar...which sometimes doesn't work'. Please try to fix it if its only my problem

I have been using FIREFOX since a long time back and am quite happy with FIREFOX 4.
But a little uncanny situation since release of FIREFOX RC is that 'Reload which used to come under view option is no longer visible,but appears as an icon(button) in toolbar...which sometimes doesn't work(becomes blur and sometimes firefox hangs)'.
Please try to fix it if its only my problem or include it in next release.Thanks!

I have been using FIREFOX since a long time back and am quite happy with FIREFOX 4.
But a little uncanny situation since release of FIREFOX RC is that 'Reload which used to come under view option is no longer visible,but appears as an icon(button) in toolbar...which sometimes doesn't work(becomes blur and sometimes firefox hangs)'.
Please try to fix it if its only my problem or include it in next release.Thanks!

Neither JMX nor JNDI seems working with OEP 12.1.3 (regression ?)

Hi,
I'm currently writing an OEP application, on the 12.1.3 version.
My first problem is related to JMX: when OEP is started, I cannot connect in JMX:
I lanch "OEP_HOME/oep/bin/wlevsjconsole.cmd"
I use the following URL "service:jmx:msarmi://localhost:9002/jndi/jmxconnector" with user "wlevs" and my pwd
Impossible to connect...
My second problem is related to JNDI resource access:
I add an "data-source" with its "data-source-params/jndi-names/element" in the OEP domain's config.xml file
I start my OEP (with or without security disbaled, it doesn't change nothing)
I try to access programmatically the JNDI resource (using the InitialContext lookup method with no prefix, with "java:comp/env/jdbc/", with "java:jdbc/, with "jdbc/") but I always get a NameNotFoundException.
I try to list programmatically the JNDI resources using the list("") but I get a NoPermissionException.
I'm not 100% sure, but it seems to me that these things were working with the 11 version of OEP. Could these be regressions ?
Thx for any help or advice on this.
RP

After a reboot of node 2 everything returned to work fine.

Android Release APK does not work with Mobile Service in Android Studio

I am using Android Studio and i have not been able to get a working release apk. What should my build file look like? Is there anything special that i need to do? The debug works fine but the release never works. Are there any code changes that need to be
made? Do i need to log into azure on the mobile device? Do I need to copy the signed certificate to the device also? Any assistance or suggestion is welcome. Below is a copy of the build file:
apply plugin: 'com.android.application'
android {
compileSdkVersion 19
buildToolsVersion "21.1.2"
defaultConfig {
applicationId "com.example.ttferryschedule"
minSdkVersion 9
targetSdkVersion 19
buildTypes {
release {
minifyEnabled true
proguardFiles getDefaultProguardFile('proguard-android.txt'), 'proguard-project.txt'
dependencies {
compile 'com.android.support:support-v4:19.1.0'
compile 'com.google.code.gson:gson:2.2.2'
compile 'com.android.support:appcompat-v7:19.1.0'
compile files('libs/mobileservices-1.1.5.jar')
compile files('libs/mobileservices-1.1.5-javadoc.jar')
compile files('libs/mobileservices-1.1.5-sources.jar')
compile 'com.google.android.gms:play-services:6.5.87'

Hi,
I would recommend going with the 2.0 Beta SDK since you are working with Android Studio. The changes from 1.1.5 to 2.0 are documented at http://azure.microsoft.com/blog/2014/08/04/futures-support-and-breaking-changes-in-azure-mobile-services-android-sdk/ and http://azure.microsoft.com/blog/2014/08/07/offline-support-in-azure-mobile-services-android-sdk/ (offline
specific). And we are in the process of publishing the beta SDK to an android repo so it's easily dependable.
Please let me know if you have any further questions.
Best,
Mimi

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imp

I would like to create the a swatch, add it to the library and import to the swatch panel. The help pages available relate to earlier versions of Muse, which does not work with the 2014.2 release version that I have. I have created a library folder, imported the colour swatch as just 4 colours as a mulib file. I drag the four colours on to the muse page in design view but that is as far as I get. Can anyone help? Thanks

I don't know since I don't share anything. You'll have to peruse the help files and check the permissions and ACLs on the Shared folder. According to the permissions on the Shared folder everyone can R&W. If you want those to be inherited by everything dropped into the folder, add an ACL for
everyone allow read, write
Details in the manpage for chmod. The actual steps are left as an exercise.

Problem installing Oracle9iDS Release 2 v9.0.2 on Debian 2.2r0 Linux with GLIBC 2.1

After starting Installer of Oracle9iDS Release 2 v9.0.2 with ./runInstaller installation broke with message
Oracle9iDS needs GLIBC 2.2
Is there any way to install Oracle9iDS 9.0.2 on Linux without moving on glibc 2.2.
Oracle 8.1.7 works very well on my Debian 22r0 - glibc2.1 kernel 2.4.7 (AMD K6 II 400+ 384MB RAM) and as I know 8.1.7 is precompiled on GLIBC 2.1 and do not work with GLIBC 2.2 so there is a problem:
Database work with glibc 2.1 and DS with GLibc 2.2
Is there any way to install DS on existing glibc 2.1
Thanks

Anthony,
You can always check for compatibility and certification matrices on the Support site: http://metalink.oracle.com.
Oracle9iDS Release 2 v9.0.2 on WinXP has no issues and is certified on the Professional edition of XP.
Regards
Sue

OEPE Release 11gR1 (11.1.1.4.0) doesn't work with WLS 10.3.4

Similar Messages

Maybe you are looking for