OES11 SP1 and Groupwise 2012 upgrade
Hi I'm am testing Groupwise 2012 with OES11 SP1 but can't seem to get the domain and Post office to start.
OES11 worked pre SP1 but.once I updated the server Groupwise doesn't want to start. Any ideas.
Cheers
Hi thanks for your quick response. That is exactly my problem. When I delete the file GroupWise works. Looks like Novell are looking at fixing the issue.
I will wait for the fix to be released.
Originally Posted by ckazzi
Hi I'm am testing Groupwise 2012 with OES11 SP1 but can't seem to get the domain and Post office to start.
OES11 worked pre SP1 but.once I updated the server Groupwise doesn't want to start. Any ideas.
Cheers
Similar Messages
-
Difference between scom 2012 sp1 and SCOM 2012 R2
what is the difference between scom 2012 sp1 and SCOM 2012 R2 ?
What's New in System Center 2012 R2 Operations Manager:
https://technet.microsoft.com/en-us/library/dn249700.aspx -
Exchange 2013 SP1 and SCOM 2012 R2
Hi there,
Hopefully someone can assist me with this issue, if it is one...
I am halfway through an Exchange migration, from Exchange 2010 SP3 on Server 2008 R2 to Exchange 2013 SP1 on Server 2012 R2.
76 users in total, roughly 80GB of Public Folders.
I have configured the 2013 environment with a cross datacenter DAG, also increased all of the timeouts of the cluster to take this into consideration, and everything appears to function as expected.
Added both 2013 machines to SCOM 2012 R2 for at least a week with no active users on it, and all monitoring reported ok, no issues.
Exchange 2010 is configured to use webmail.company.com for RPC over HTTP, which is what I have configured 2013 to use as well.
Implemented Microsoft ARR for client access to Exchange 2013, as opposed to ISA we've used for Exchange 2010.
A week ago, changed the DNS records for webmail.company.com from ISA to ARR, and all clients connected perfect.
Thought, ok, now we can start the migration. So far everything "seems" to be going perfect with the mailbox moves, however, SCOM is really noisy.
Attempted to reran the probe for EWS and got the error below:
Is there perhaps anyone that can assist me with these errors?
CheersFYI... IIS ARR is not supported for Exchange Server.
Check in event log if you are getting anything related to the issue.
About Outlook POP UP to end users. Check the event log on 2010/2013 for MRS events.
Are those mailboxes still moving or in move request?
Cheers,
Gulab Prasad
Technology Consultant
Blog:
http://www.exchangeranger.com Twitter:
LinkedIn:
Check out CodeTwo’s tools for Exchange admins
Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose. -
SQL 2012 SP1 and SCCM 2012 SP1
Hi,
I am installing SCCM 2012 SP1 with SQL 2012 SP1 in Stand-Alone mode. But I am receiving error:"the service broker endpoint cannot listen on port 4022 because it is in use by another process"
I saw in SQL (SQL Server Configuration Manager) that I am using port 4022 without dinamic port.
Thaks.
Lessandro Zampieri - http://lezampieri.comThanks for the reply.
C:\>netstat -ano
Active Connections
Proto Local Address Foreign Address State PID
TCP 0.0.0.0:80 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:135 0.0.0.0:0 LISTENING 780
TCP 0.0.0.0:443 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:445 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:4022 0.0.0.0:0 LISTENING 4664
TCP 0.0.0.0:5985 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:47001 0.0.0.0:0 LISTENING 4
TCP 0.0.0.0:49152 0.0.0.0:0 LISTENING 528
TCP 0.0.0.0:49153 0.0.0.0:0 LISTENING 836
TCP 0.0.0.0:49154 0.0.0.0:0 LISTENING 900
TCP 0.0.0.0:49155 0.0.0.0:0 LISTENING 624
TCP 0.0.0.0:49156 0.0.0.0:0 LISTENING 624
TCP 0.0.0.0:49217 0.0.0.0:0 LISTENING 616
TCP 0.0.0.0:49219 0.0.0.0:0 LISTENING 4184
TCP 0.0.0.0:49389 0.0.0.0:0 LISTENING 2056
TCP 0.0.0.0:49627 0.0.0.0:0 LISTENING 5060
TCP 127.0.0.1:49390 0.0.0.0:0 LISTENING 2056
TCP 127.0.0.1:49628 0.0.0.0:0 LISTENING 5060
TCP 127.0.0.1:57593 0.0.0.0:0 LISTENING 4664
TCP 192.168.100.30:139 0.0.0.0:0 LISTENING 4
TCP 192.168.100.30:445 192.168.100.20:49420 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49421 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49422 ESTABLISHED 4
TCP 192.168.100.30:445 192.168.100.20:49423 ESTABLISHED 4
TCP 192.168.100.30:4022 192.168.100.30:61430 ESTABLISHED 4664
TCP 192.168.100.30:4022 192.168.100.30:61496 ESTABLISHED 4664
TCP 192.168.100.30:49627 192.168.100.40:55914 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55915 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55921 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55922 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55926 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55927 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55928 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55929 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55930 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55967 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55992 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:55998 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56001 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56002 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56009 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56077 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56211 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56656 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56687 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56817 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56891 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56946 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:56959 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57027 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57072 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57223 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57240 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57248 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57268 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57292 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57293 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57294 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57311 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57312 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57314 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57320 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57340 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57342 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57343 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57369 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57372 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57379 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57385 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57386 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57387 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57388 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57389 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57390 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57391 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57392 ESTABLISHED 5060
TCP 192.168.100.30:49627 192.168.100.40:57393 ESTABLISHED 5060
TCP 192.168.100.30:61430 192.168.100.30:4022 ESTABLISHED 4112
TCP 192.168.100.30:61496 192.168.100.30:4022 ESTABLISHED 4112
TCP 192.168.100.30:61537 192.168.100.10:49158 TIME_WAIT 0
TCP [::]:80 [::]:0 LISTENING 4
TCP [::]:135 [::]:0 LISTENING 780
TCP [::]:443 [::]:0 LISTENING 4
TCP [::]:445 [::]:0 LISTENING 4
TCP [::]:4022 [::]:0 LISTENING 4664
TCP [::]:5985 [::]:0 LISTENING 4
TCP [::]:47001 [::]:0 LISTENING 4
TCP [::]:49152 [::]:0 LISTENING 528
TCP [::]:49153 [::]:0 LISTENING 836
TCP [::]:49154 [::]:0 LISTENING 900
TCP [::]:49155 [::]:0 LISTENING 624
TCP [::]:49156 [::]:0 LISTENING 624
TCP [::]:49217 [::]:0 LISTENING 616
TCP [::]:49219 [::]:0 LISTENING 4184
TCP [::]:49389 [::]:0 LISTENING 2056
TCP [::]:49627 [::]:0 LISTENING 5060
TCP [::1]:49390 [::]:0 LISTENING 2056
TCP [::1]:49628 [::]:0 LISTENING 5060
TCP [::1]:57593 [::]:0 LISTENING 4664
UDP 0.0.0.0:123 *:* 948
UDP 0.0.0.0:500 *:* 900
UDP 0.0.0.0:1434 *:* 3000
UDP 0.0.0.0:4500 *:* 900
UDP 0.0.0.0:5355 *:* 124
UDP 127.0.0.1:51181 *:* 4132
UDP 127.0.0.1:51338 *:* 124
UDP 127.0.0.1:55475 *:* 900
UDP 127.0.0.1:59835 *:* 1628
UDP 127.0.0.1:60840 *:* 3596
UDP 127.0.0.1:62010 *:* 1816
UDP 127.0.0.1:62390 *:* 4112
UDP 127.0.0.1:64129 *:* 624
UDP 192.168.100.30:137 *:* 4
UDP 192.168.100.30:138 *:* 4
UDP [::]:123 *:* 948
UDP [::]:500 *:* 900
UDP [::]:1434 *:* 3000
UDP [::]:4500 *:* 900
All things are correct?
Att.,
Lessandro Zampieri - http://lezampieri.com -
Hello folks!
Im setting up a lab environment. I have installed SCSM DW and console, did pritty much what Carol did in this blogpost:
http://www.wapshere.com/missmiis/installing-reporting-for-fim-r2
At the stage where Im gonna add FIM Reporting I get a error saying I have to install the KB2561430. This i apparently a hotfix for SCSM 2010 SP1. So, Im not able to install this hotfix in my environment since im running SCSM 2012.. Any ideas ? Im stuck.
Regards, RemiWhen you install FIM Reporting on a new server that has Service Manager 2012 SP1
installed, follow these steps:
Install the FIM 2010 R2 SP1 FIMService component. To do this,
clear the Reporting check box.
Upgrade the FIMService installation to build 4.1.3451.0.
Run the change-mode installation for the FIMService, and then
add Reporting.
http://blogs.technet.com/b/steady/archive/2013/06/12/fim-2010-r2-sp1-reporting-failure-scsm-2012-sp1-you-must-apply-patch.aspx
Cordialement, Best Regards, مع أجمل تحياتي ESSALIFI Mohamed Faiçal [MCT-MCSE]. If your question is answered please mark the response as the answer so that others can benefit. -
SCCM 2012 SP1 and MDT 2012 Task Sequence Templates, MDT File/Settings Packages
We're setting up SCCM 2012 integrated with MDT 2012 for our OSD. My main issue is finding actual reference material for the MDT task sequence templates when integrated with SCCM. The MDT documentation has a lot of information on variables and task sequences
outside of SCCM integration.
One thing I'd love to find information on is what's actually going on during an MDT Client Task Sequence template. I found this http://social.technet.microsoft.com/Forums/en-US/645a77b2-5be6-431d-818c-57d24b1435cc/understanding-mdt-task-sequence?forum=configmgrosd but
it doesn't delve into the kind of detail I'm looking for. I can dig up information through the MDT reference material on some things, but I just can't find anything out there that actually walks you through an SCCM/MDT task sequence template. For instance,
under State Restore what is being referenced in Install Software with base variable name PACKAGES, vs Install Applications and base variable name COALESCED APPS. And, where are you supposed to put these applications? That's just a specific example, I'm hoping
to find some kind of walkthrough.
Two things I'm hazy on are the MDT packages. What exactly are the MDT Settings Package, and the MDT Files Package? What are they used for? What benefits do you get out of using them? And, how exactly do you use them? I know one of them has something to do
with customsettings.ini, but what's the point of using SCCM with MDT if you still have to muck around in the customsettings.ini file?
Either way, it seems like there are a lot of references to SCCM task sequences, and a lot of references to MDT task sequences. But, not together. Which is a bit annoying since the MDT-integrated task sequence templates are very obviously different than either
SCCM or MDT by itself. Any help would be appreciated, even just information on where to look. Maybe I'm just really bad at finding reference material for SCCM/MDT. Thanks.When MDT integrated with SCCM, We need the following MDT components to be created:
MDT Boot image
MDT Toolkit Files
MDT Settings
The MDT boot image (for example) gives you extra abilities over the standard ConfigMgr boot image such as the ability to display a HTA Refer here:
http://www.windows-noob.com/forums/index.php?/forum/98-frontends-and-web-services/
MDT Files once created, you will find UDIWizard_Config.Xml file in which you can start User driven Installation OSD using UDI designer.
Refer these links for better understanding:
http://www.windows-noob.com/forums/index.php?/topic/5131-using-sccm-2012-rc-in-a-lab-part-16-integrating-mdt-2012-rc1-with-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5221-using-sccm-2012-rc-in-a-lab-part-17-using-mdt-2012-rc1-within-configuration-manager-2012/
http://www.windows-noob.com/forums/index.php?/topic/5250-using-sccm-2012-rc-in-a-lab-part-18-deploying-a-udi-client-task-sequence-with-mdt-2012-rc1-integrated-in-configuration-manager-2012/
Thanks, Prabha G
Thanks for the quick reply. But, what about the MDT Settings Package? Also, both have a pretty big folder structure for each package. Surely it does more than just provide a couple xml and ini files? I'm not looking for anyone to spoon-feed me the information,
but at least a pointer in the right direction for finding the reference material. It seems for SCCM/MDT integration you have to go all over the place finding scraps of information to put together.
Also, any info on the SCCM/MDT task sequence templates? Thanks. -
GW2012 sp1 and OES 11 requirements ?
I going to be migrating the last of our post offices to OES11 in the next couple weeks. When I am done, everything will be on oes11 (not sp1) and gw8.3 I then plan to upgrade to 2012sp1 once everything is ok with the PO's on Linux.
My question is, do I need to upgrade to OES11 sp1 before doing the upgrade to 2012sp1 ?deborahshields,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/ -
Hyper-V host server upgrade from Server 2008 R2 Enterprise SP1 to Server 2012 R2 Datacentre
We are about to upgrade our Hyper-V host servers from Server 2008R2 Enterprise SP1 to Server 2012 R2 Datacentre to take advantage of the latest Hyper-V features.
This only concerns the host servers and not the guest VMs running on the hosts (they will be upgraded next year).
This is what is running on our host servers:
Host 1
File,print & issuing CA server
Exchange 2010
SharePoint 2010
Quickbooks server
Domain controller 1
Offline CRL CA
Host 2
SQL 2008
Forefront TMG 2010
Domain Controller 2
Windows 7 client
With this is mind, I have drafted a rough action plan as follows:
Create a list of all file locations for VM memory, snapshots, virtual memory and Hyper-V config files
Document all existing system settings
Gather server information, download drivers, RAID controller and other boot drivers & firmware updates (in case the in-place upgrade fails)
Test all software media
Copy all VMs onto external data storage (NAS drive)
As part of the upgrade process we will redistribute some hard drive space i.e.
expand them to their new sizes and verify the data integrity of copied VMs by powering up each VM in a test environment
Wipe and adjust the sizes of the host partitions to accommodate the expanded VMs
Perform an in-place upgrade to Server 2012 R2 Datacenter
Check EV, services etc
Change the default locations for VM memory, snapshots, virtual memory and Hyper-V config files
Upgrade Anti-virus and other system software
Test the system
Are there any glaring omissions? Does anyone have any tips they can give me?Hi Marco,
always do a fresh Installation of your hyper-V Hosts, you could end up doing a lot of Troubleshooting with Drivers,Addons etc.. new Installation ist way faster.
Depending if you have a Cluster or Standalone Servers there are different ways to do it.
When you have installed your 2012 R2 Hyper-V Server you just can Import the VMs from the new Location.
As far as i know VMs with snapshots are not supported, so you have to remove them before doing that move and commit the changes to the vhd files, the VM need to be offline on 2008R2 to do that.
You do not Need to Export the VMs on 2008R2, just copy it, normaly you should have all Files of a VM in one Folder.
A working Backup is always your friend on such Tasks.
When the VMs are running on Hyper-V 2012R2 do not forget to Update the Integration Services.
Make Sure your Servers Hardware are still supported with 2012R2, see Server Catalog and Support Matrix of the Vendor.
And last one, where possible and supported convert the VHDs to VHDx Disks, after testing the first boot of the VM.
Udo -
Hello All,
Executed the following command in the SP 2013 management shell as administrator:
"Test-SPContentDatabase -Name WSS_CONTENT -WebApplication http://tfs2010"
Errors:
1. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\ReportServer\ReportViewer.dwp] is referenced
[2] times in the database [WSS_CONTENT], but is not
installed on the current farm. Please install any
feature/solution which contains this file.
2. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\TfsDashboardAgileReports\Reports\Report
Template.xltx] is referenced [2] times in the database
[WSS_CONTENT], but is not installed on the current farm.
Please install any feature/solution which contains this file.
3. Category : MissingSetupFile
Error : True
UpgradeBlocking : False
Message : File [Features\TfsDashboardCmmiReports\Reports\Report
Template.xltx] is referenced [2] times in the database
[WSS_CONTENT], but is not installed on the current farm.
Please install any feature/solution which contains this file.
4. Category : Configuration
Error : False
UpgradeBlocking : False
Message : The [SharePoint - 80] web application is configured with
claims authentication mode however the content database you
are trying to attach is intended to be used against a
windows classic authentication mode.
Tried for the error 4: New-SPWebApplication -Name "TFSWEBAPP" -ApplicationPool "SharePoint Web Services System" -AuthenticationMethod "NTLM" -ApplicationPoolAccount
(Get-SPManagedAccount "XXX\spservice") -Port 80 -URL "http://tfs2010
After executing the above command I was getting ">>",
didn't got any other reply for long time. Is there any power shell command to convert "claims mode" to "classic mode"
Can someone help on the above mentioned errors.
Thanks ,
RajukumarHi Charles,
Thanks for the reply.
Environment details:
OS: Windows server 2008 R2
Database: SQL Server 2008 R2
TFS: TFS 2010 with SP1
SharePoint: SharePoint 2010 with SP2
Upgrade Environment details:
OS: Windows server 2012
Database: SQL Server 2012 with SP1
TFS: TFS 2012
SharePoint: SharePoint 2013
Steps followed by me for upgradation:
1. Stopped all the services of TFS and IIS
2. Took backup of TFS and SP databases from SQL server
3. Installed the new environment and restored databsases to new Database server
4. Upgraded to TFS 2012
5. Installed and configured SP 2013
6. Upgraded to SP 2013
Go the errors mentioned in earlier message during up-gradation. I queried the files from ALLDOCS table of WSS_Content and deleted those.
7. Upgraded successfully with minor issues ( reports are not available for the old Team project in the report manager URL)
8. I updated the reports manually.
Question: Please let me know is there any script to update reports in all the team projects.
Thanks,
Rajukumar -
Where is System Center 2012 for download? I see Sp1 and R2
I have a DPM 2010 install that I am going to upgrade to 2012.
After doing a bunch of reading on here and other documentation,
a DPM 2010 -> 2012 in place upgrade is supported
but 2010 -> 2012 Sp1 or R2 is not supported.
Ok fine...Where the hell can i download the plain 2012?!?! i can't find for download on microsoft's site at all.
Can someone help me out with this?!?
Sp1 and R2 i can find all day long, i even find the 2010 eval version but the 2012 without sp1 is nowhere to be seen.If you are planning to upgrade to 2012 R2, when doing the planning make sure your DPM Install is running on a atleast Server 2008 R2 with SP1, and that your SQL Server that is hosting the DPM Database is running atleast SQL Server 2008 R2
with SP2.
Also make note that if you bring DPM up to 2012 R2 you can for the time being not backup Server 2003 and Server 2008 operating systems.
Kind Regards,
Tobias -
Windows 2012 upgrade plan to R2 hosted with SCOM 2012 SP1
Dear Experts,
Currently we are hosting SCOM 2012 SP1 on Windows 2012 Operating System and the Server team plan to upgrade Windows server OS 2012 to Windows OS 2012 R2.
So, Is there any Potential road blocks and things to take care for SCOM 2012 SP1 if we want to upgrade the Windows 2012 R2 OS.
Thanks,
Saravana
Saravana RajaHi,
I have seen this a couple of times without any issues.
Just make sure you backup all SCOM related (databases if local, management packs etc).
www.coretech.dk - blog.coretech.dk -
Issue while Upgrading vmm 2012 sp1 to vmm 2012 R2
Hi,
We are trying to upgrade the vmm setup to 2012 r2 ,we retained the existing vmm database
While upgrading to vmm 2012 r2 , got the below warning message:
"The VMM database contains one or more services in a failed state. Upgrading to VMM in System Center 2012 R2 is not recommended. Retry the upgrade after you have reinstalled VMM for System Center 2012 SP1 and repaired or removed these services. Click
Cancel to exit the upgrade."
Tried to find the bug using the vmm logs file like
errlevel
setupwizard
vmmserver
In erlevel log, the entry was "0".
Any idea what the issue is????1. You just need CU3 - these are cumulative
2. Sure, you can take a temporary snapshot. You need to take a SQL backup also.
3. Don't forget to test the upgrade process on a copy of your site database (use /testdbupgrade)
This guide may help you
http://www.gerryhampsoncm.blogspot.ie/2013/10/in-place-upgrade-sccm-2012-sp1-to-r2.html
Gerry Hampson | Blog:
www.gerryhampsoncm.blogspot.ie | LinkedIn:
Gerry Hampson | Twitter:
@gerryhampson -
Upgrading from SCOM 2012 SP1 to SCOM 2012 R2 what CU do i install? CU5?
Hi,
I just upgraded from SCOM 2012 SP1 to SCOM 2012 R2. What CU version should I install? CU5?
Thanks
KThe most current CU version os SCOM 2012R2 is CU4
You can download it from
https://support.microsoft.com/kb/2906925?wa=wsignin1.0
For detail description of SCOM 2012 R2 CU4, you may refer to
http://support.microsoft.com/kb/2992020
and
http://syscentercldman.blogspot.hk/2014/12/update-of-scom-2012-r2-ur4.html
Roger -
ZAV GroupWise 2012 SP1 PDF Attachment error
Hi,
I used the novell template for GroupWise 2012 SP1.
Attachements for Office 2010 are working fine.
But when opening PDF's its giving an error for protected mode.
I am using spoonreg virtual.exe on the client.
Can somebody help me with this?
JoeriJoeri,
Can you verify if the virtual file system for this build contains the following folder:
@SYSTEM@\macromed\flash
If so, create a text file called mms.cfg, with the following data:
ProtectedMode=0
Add it under that folder in the virtual file system and rebuild, then try using the virtual app and see if the PDFs still give you problems. You can also try building this in ZAV 10, to see if you get any better results. -
Groupwise 2012 SP2 and Office 2010 integration
I have recently virtualized Groupwise 2012 and all seems to work well, Messenger launches on startup and it integrates with other applications etc but the only problem I have is when I open an Office 2010 document I get the following message popping up:
Please wait while Windows configures Microsoft Office Standard 2010
Gathering Required Information
This is in a MSI/Windows Installer box, I can only imagine that its installing some kind of user settings but I have scoured the internet and imported all the reg keys etc that I can find. This also happens everytime a document is launched, if it happened once a session I could maybe understand.
Has anyone else experienced this issue with Groupwise and Office?
Environment is ZAV 10 & Windows 7 x64
Thanks
Robrobertleishman,
It appears that in the past few days you have not received a response to your
posting. That concerns us, and has triggered this automated reply.
Has your problem been resolved? If not, you might try one of the following options:
- Visit http://support.novell.com and search the knowledgebase and/or check all
the other self support options and support programs available.
- You could also try posting your message again. Make sure it is posted in the
correct newsgroup. (http://forums.novell.com)
Be sure to read the forum FAQ about what to expect in the way of responses:
http://forums.novell.com/faq.php
If this is a reply to a duplicate posting, please ignore and accept our apologies
and rest assured we will issue a stern reprimand to our posting bot.
Good luck!
Your Novell Product Support Forums Team
http://forums.novell.com/
Maybe you are looking for
-
In what part of this workflow will Mac Pro actully save us a lot of time?
Although the nMP is really tempting, I'm starting to get second thoughts in terms of how much time it will actually save us...... In our studio, we do a daily, 30 min. 3 camera technews show in 1080p for YouTube. Until now, we've been using a 2010 Ma
-
Parsing and rewriting an SQL query
Hi all, I need to rewrite bits of a valid PL/SQL query. In order to do so, I need semantic information about the query, such as "what are the table names columns are being selected from" or "do aggregate functions in a select provide column alias in
-
Create ipub 3 children's book in Khmer
Hello, looking for recommendations on best program to use to create epub 3 format books. The books are in Khmer as primary langauge - hence the requirement. I have already created finished content in iBooks format, but need to now back track and make
-
Placing multicam shots from viewer to canvas?
I've edited a multicam sequence and now need to use that exact sequence in another sequence BUT the error I'm getting is "Operation not allowed. You cannot nest sequences with different editing timebases."????? Please help. I've tried making a subcli
-
Firefox 11 ignoring DPI setting in Windows 7!
I loaded Firefox 11 on my new Windows 7 laptop. The display resolution on the laptop is 1900 x 1200 on a 15" display. So I changed the Windows 7 DPI to 120 dpi. Internet explorer 9 changes accordingly, but Firefox 11 does not. I found online that I s