OES2 SP3: Master sends poison pill upon creation of new volumes

I'm experiencing problems when creating a clustered pool and volume on
OES2 SP3. After assigning a new FC LUN which is available on all nodes
I'm using iManager to create a new pool and volume on the master node as
described in the documentation. However, at some point in the procedure
the master starts killing other nodes. Inspection with nssmu shows that
the new pool is just available on some nodes. After a reboot everything
is working nicely.
Should I send the cluster to maintenance mode prior to adding a new
volume? How can I force OES2 to scan for new pools other than rebooting
the system? Is there a known problem or a TID for this behavior?
Gnther

Am 05.09.2012 09:38, schrieb Hans van den Heuvel:
> On Tue, 04 Sep 2012 18:00:53 +0000, Andy Konecny wrote:
>
> Hi Andy
>
>> From this TID, it does look like the fix isn't generally available yet,
>> especially given that the TID was last edited today.
>
> I have modified the wording in the TID, as the 'naming scheme' part
> seemed to be confusing here.
>
> The should have read as in this particular tree, specific services are
> installed and named in a specific way for easy identification purposes,
> and these newly created cluster resources just did not comply to that.
> They were just not named properly, nothing else.
Sorry, but right now I'm completely confused. What are you talking about?
From cluster administration manual:
"10.1.1 Naming Conventions for Cluster Resources
Cluster resource names can be up to 63 characters. Novell
Cluster Services supports only
alphanumeric characters and the underscore character in
cluster resource names:
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwx yz0123456789_
Special characters, such as the following, are not supported
in cluster resource names:
!@#$%&()
Because the NSS pool name and Linux volume names are
automatically used in the cluster resource
name, do not use special characters !@#$%&() in names of NSS
pools or Linux POSIX volumes that
you plan to cluster enable."
I did not use special characters in names of cluster resources, pools or
volumes. So will my problem be still related to this TID?
I will gave to go and check with CRM debugging.
Günther

Similar Messages

Send email to upon creation of service request

Hello Experts,
I have a requirement wherein upon creation of a service request in Interaction Center, an email must
be sent automatically to the responsible employee. In the functional specs it says that I need to create
a mail form and this will be called using action profile. When I tested it the action definition goes into an error.
From what I understand, we cannot call mail forms using processing type 'SMARTFORMS MAIL'. So my questions are listed below:
1. If I stick with mail forms creation, how can I get the needed data example from the business object, etc.
2. Are there any other way to do my requirement? Maybe mail forms is not needed and some configs just needs to be maintained.
Thank you guys and have a nice day!

Hi Viraylab,
If you stick with send email with smartform then the config of action profile should be :
object type name = BUS2000223
context class = CL_CRM_SRQM_CONTEXT_PPF
Create your own Action Definition, in the Processing Types of Action choose Smart Forms Mail
Form Name = your form name
Processing Class = CL_DOC_PROCESSING_CRM_ORDER
Processing Method = CRM_ORDER_EXEC_SMART_FORM
Hope it's help,
Lina

Sending an email after creation of new role

Whenever new role is created in Transaction PFCG I need to email to all the users.
There is no User-Exit in PFCG and we can't create any new Program for this.
So how it will be done?
If anyone worked on it please reply to this as soon as possible.

hi Zahid Khan,
as said i tried the same.
i have created a button "send" action :submit.
and also have created a process"send mail" with the folloing code
DECLARE
l_body CLOB;
BEGIN
l_body := 'Thank you for your interest in the APEX_MAIL package.'||utl_tcp.crlf||utl_tcp.crlf;
l_body := l_body ||' Sincerely,'||utl_tcp.crlf;
l_body := l_body ||' The APEX Dev Team'||utl_tcp.crlf;
apex_mail.send(
p_to => '[email protected]',
p_from => '[email protected]',
p_body => l_body,
p_subj => 'APEX_MAIL Package - Plain Text message');
APEX_MAIL.push_queue;
END;
and , Process Success Message as "done" and When Button Pressed (Process After Submit When this Button is Pressed): "SEND" WITH Process Point : "ON SUBMIT AFTER COMPUTATIONS AND VALIDATION"
The process is running.., getting the """success message""" but unable to""" get the mail""".(tried different combinations of mail ids)
any help !!!

Replicate in the Master controller and creation of new user with cisco prime infrastructure 2.1.

Hello!!
We have multiple controllers Cisco WLC 5508 (all running software version 7.6.120.0) distributed in various buildings and a controller in other control building (also Cisco WLC 7.6.120.0 5508) operating as Master and backup of the buildings's controllers .
Each building is radiated such an SSID that is used as a validation of the user connected to that SSID web portal each controller (in the WLAN, Security -> Layer 3 -> Web Policy), using the local database to validate the user.
The problem is that the local database of users is not being replicated between controllers buildings and the Master controller, so if you drop the controller of a building, the Master controller begins to provide service to the buildings access points, but the equivalent radiated SSID cannot able to validate users.
I need know if it's possible through Cisco Prime Infrastruture 2.1, first replicate in the Master controller on the basis of existing controllers buildings each local data and, second, that the creation of new users are automatically perform both the controllers like to the Master .
Thanks.

As noted earlier, it is not advisable to use the root user to log in for normal use. New users and groups can be created by navigating to Administration > Users, Roles & AAA as shown in the preceding figures. It would help to chalk out what are the various levels at which you want to distribute the users, and to create those roles first. It doesn’t really matter whether you create users or groups first. New users can be easily added by going to Administration > Users, Roles & AAA > Users > Add Users > Select “Add Users” from the drop-down on the right side. Once you get into the add user workflow, fill in the username, password, and local authorization for this user as shown in the figure below.
A virtual domain can also be assigned to the users when you define their roles by selecting the virtual domain on the left side and moving it to the right side as shown in the image below (left).

Bank Master Data ( Creation of new Account )....

Dear SAP Gurus,
Good morning to all,i have one doubt regarding creating a new Bank Master Data in Production, please help me.My user has a requirement which is like one Cash Credit Account has been opened with SBI bank where with the same bank and branch there is already an existing Current Account,now my client wants from me to create a bank master data for the new bank Cash Credit Account( as he is saying that he has to maintain BRS).
Now i have to know that what is the best practice in sap whether i should create one more master data for the new Account or i should attach the new account with the existing Bank Master?
Please help it is urgent.I'll be waiting for your valuable suggestion.
Regards
Rajiv Kapur

Hi Rajiv,
Creation of new house bank will not serve purpose in better way, it is only required when there is a complext scenatio in check printing but that does not appear in your case.
So, create a new Bank Account in the existing House Bank, this will be included in Bank Reconciliation. Moreover, creation of Bank account instead of House Bank will also ease some maintainance in Bank Reconciliation statement configuration.
Regards,
Chintan Joshi

Mac os 10.6.8 cannot login to OES2 sp3

i'm having issues logging into a clean install of OES2 SP3 Linux SLES10 sp4 server here's my log file:
Feb 20 03:23:31 Server-1 afptcpd[4407]: Created session: 10 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:31 Server-1 afptcpd[4407]: Closing session: 10 <0x82afc38>, Socket: 60, Pending requests: 0
Feb 20 03:23:31 Server-1 afptcpd[4407]: Created session: 11 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:31 Server-1 afptcpd[4407]: Closing session: 11 <0x82afc38>, Socket: 60, Pending requests: 0
Feb 20 03:23:41 Server-1 afptcpd[4407]: Created session: 12 <0x82afc38>, Socket: 60, Total sessions: 2
Feb 20 03:23:41 Server-1 afptcpd[4407]: [debug] LDAP user name: cn=horchemg,ou=springfield,o=missouri
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - INFO:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - WEBBACKUP:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - HORCHEMG:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - INFO:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - WEBBACKUP:\
Feb 20 03:23:41 Server-1 afptcpd[4407]: [error] Failed to get volume key for - HORCHEMG:\
Feb 20 03:23:42 Server-1 afptcpd[4407]: Closing session: 12 <0x82afc38>, Socket: 60, Pending requests: 0

On 21/02/2012 23:16, ataubman wrote:
> Also, has OES been patched up? You need at least the November 2011
> patches to get AFP to work with 10.6.8 , IIRC.
I think you're getting your Mac OS X versions mixed up as Snow Leopard
(10.6.x) was supported from the beginning with AFP in OES2 SP2 and
later. See
http://www.novell.com/products/opene...owleopard.html
It's OS X Lion (10.7.x) that requires the November 2011 (and earlier)
patches for AFP in OES2 SP3 but it is supported from beginning with OES11.
HTH.
Simon
Novell/SUSE/NetIQ Knowledge Partner
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

Migrate NSS volume data from OES2-SP1 to OES2-SP3 server fails

Hello forums
I have a senario where we want to use miggui to migrate all files/folder
and trustees, to e new server using miggui.
When we try to migrate from the existing "VOL" from the old OES2-SP1
server, we get an error on the miggui log running on the new OES2-SP3
server like this:
ERROR - FILESYSTEM:migfiles:Error: nbackup: (libtsafs.so 6.50.0 269) No
data sets can be found or the resource is not available.
In the miggui the Volumes can be dragged and dropped fine.
I do not by not know the old OES2-SP1's patch level, nor the OES2-SP3's
at this time.
Any ideas of what causes this error?
- Michael

Have you looked at this?
Troubleshooting data migration issues with miggui
I'd check and maybe see if the sms/tsa code is working properly on the OES2 SP1 server.

Prevent automatic opening (display) upon creation of a PDF.

How do I create a pdf in Acrobat X Pro without the PDF opening (displaying) upon creation?

I'm using a Fujitsu Scansnap Scanner to create the PDF. I want it to put the PDF on my desktop but not open it for viewing.

Defualt Output Types on Billing Document Upon Creation

Need to know if it is possible through configuration to default specific output types on a Billing Document upon creation. We have created a few SAP Smart Forms for print for SD Billing Documents that typically we would have users set up via transaction VA02 Goto>Header>Output. We have run into issue though becuase these users cannot have access to VA02, so we are looking for an alternative to default the output types so that from initial screen on VA03 the can go to Billing>Issue to Output and select the type. If nt standard configuration does anyone know if this has been done via custom dev.
Thanks!

Dear Brendan,
If you use VV11 and make the output type default for the given sales order type (key combination)then there is no need to maintain it every time in va02, you can get the output directly in the VF03 >sales document >issue output to.
Regards
Sandeep Degave

OES2 SP3 DNS/DHCP Console

Just a quick note that currently, the latest DNS/DHCP Console isn't
available for download on Novell's site. You have to get it off of your
OES2 SP3 server instead.
http://servername/welcome/client-software.html
Then you can follow TID 7006450 to configure it so you can view leases.
-Mike

On 25/02/2011 21:35, TitanXV wrote:
> It will only be available if the novell-dnsdhcp-javaconsole rpm is
> installed, and you can also grab it from the directory at
> /srv/www/novell/clients/dnsdhcp
If you do not have the novell-dnsdhcp-javaconsole RPM installed but do
have access to the OES2 SP3 media (and don't want to install DNS/DHCP on
a server just to get the latest JavaConsole) then on a Linux box you can
extract the latest code via:
rpm2cpio /path/to/novell-dnsdhcp-javaconsole-2.0.1-0.33.<arch>.rpm |
cpio -idmv
(where <arch> is i586 or x86_64 depending on 32- or 64-bit - note same
files included in both)
You can then take the relevant DNSDHCP_SA.zip file and use it to install
the JavaConsole on your admin workstation(s).
HTH.
Simon
Novell Knowledge Partner (NKP)
Do you work with Novell technologies at a university, college or school?
If so, your campus could benefit from joining the Novell Technology
Transfer Partner (TTP) program. See novell.com/ttp for more details.

ZDM 7 on OES2 sp3

Has anyone gotten ZDM 7 to work on OES2, sp3? I tried installing on 2 machines and got 2 different "non-fatal" errors which must have been fatal because I can't start the services. I only want workstation importing, thats it. Errors have to do with jclient/dclient, and some other things. I can post the real text from the install log if anyone has an idea. novell-zmd-awsi status says unknown file, and same for ZFDstart and ZFDstop in /opt/novell/zenworks/bin/whatever...
Thanks.

Originally Posted by jzamiska
Has anyone gotten ZDM 7 to work on OES2, sp3? I tried installing on 2 machines and got 2 different "non-fatal" errors which must have been fatal because I can't start the services. I only want workstation importing, thats it. Errors have to do with jclient/dclient, and some other things. I can post the real text from the install log if anyone has an idea. novell-zmd-awsi status says unknown file, and same for ZFDstart and ZFDstop in /opt/novell/zenworks/bin/whatever...
Thanks.
Along with Shaun's suggestion as it's related... also curious which ZDM install media you used (i.e. 7 SP1 IR4b)?
Cheers,
Willem

Windows 8.1 and OES2 SP3

I've noticed that Windows 8.1 iprint is currently support for iPrint Appliance and OES 11 server only. Will Novell release update for iprint server code for OES2 SP3 to support Windows 8.1? I do not want to upgrade to OES11 at this point.
Thanks,

poweruser wrote:
>
> I've noticed that Windows 8.1 iprint is currently support for iPrint
> Appliance and OES 11 server only. Will Novell release update for
> iprint server code for OES2 SP3 to support Windows 8.1? I do not want
> to upgrade to OES11 at this point.
To add to Mysterious' post, OES 2 went out of general support 31 July
2013. As a result there are no further enhancements coming to OES 2.
If you don't want to upgrade to OES 11 you could always implement the
iPrint appliance and migrate printing over to it while leaving the rest
of your services on OES 2 until you'r eable to upgrade.
Your world is on the move. http://www.novell.com/mobility/
We know what your world looks like. http://www.novell.com/yourworld/

Netware 6.5 SP8 to OES2 SP3 Migration Error with migfiles

Hi,
at first. We would like to abuse the migfiles tool to mirror data from Netware to OES2 SP3 with trustees !! Do you know a better tool than migfiles, please let me know. Its very important for me to use a CLI Command tool like migfiles, because it should run automatically.
We want to mirror data from a Netware 6.5 SP8 NSS Volume to a OES2 SP3 NSS Volume with trustess. The first migration with following line works without any error:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i
From this point we need the -sync parameter to keep the data current.
I use this:
migfiles -s IPAddress -V Daten -x /media/nss/D4/Test3/ -i --sync "22-07-2011 16:26"
But then i became this errors:
Error: nbackup: Failed to restore: DATEN:VOLDATA.TDF
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
Error: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
Error: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
Fatal: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
Fatal: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
When the Sync job is finished, no file which was changed on the Source was migrated to the destination.
For your information. With the Novell Migration Tools (GUI) i have the same error. But with the Windows version "Novell Server Consolidation and Migration Toolkit" it works without any errors. But its a GUI tool without the possibility to run it automatically.
Any ideas
Thanks Andreas

Hi,
thank you for your reply. This is the log:
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command started at 01-08-11 14:33:07
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: migfiles command executed as: /opt/novell/migration/sbin/migfiles -s xxx.xxx.xxx.103 -V Daten -x /media/nss/D4/Test3/ -i --sync 22-07-2011 16:26 --debug
D, [01-08-2011 14:33:07#4872] DEBUG -- migfiles: Calling function getCredentialDetails
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Successfully taken credential Details of source and destination server from user
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: nbackup command executed as LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -U "admin.havas" -R xxx.xxx.xxx.103 --list-tsa-version
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Major version of source tsafs is 3
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: Minor version of source tsafs is 1
D, [01-08-2011 14:33:21#4872] DEBUG -- migfiles: ncpshell command executed as /opt/novell/ncpserv/sbin/ncpshell --ip=xxx.xxx.xxx.103 --u="admin.havas" --vinfo --parm1="Daten"
I, [01-08-2011 14:33:22#4872] INFO -- migfiles: Given destination path is NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Source path is Daten:
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination path is /media/nss/D4/Test3/
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Successfully returned from function verifyAndFixSrcPath
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Destination volume type: NSS
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function get_nss_vol_and_mnt_point_from_path
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Calling function is_compression_enabled
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: Started on: "1-8-2011 14:33:22"
D, [01-08-2011 14:33:22#4872] DEBUG -- migfiles: smstool cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/smstool --srcuser ".admin.havas" --destuser "root" -R xxx.xxx.xxx.103 --sync-time "22-07-2011 16:26" --output-file /tmp/smstoolOutFile.4872 --finddiff "Daten: /media/nss/D4/Test3/" 2>&1
I, [01-08-2011 14:33:23#4872] INFO -- migfiles: Generating list of files and folders to be synced
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Executing nbackup command from syncfiles: LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: nbackup cmd = LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -cF --disable-caching -U ".admin.havas" --expand-compressed-data -R xxx.xxx.xxx.103 -T /tmp/smstoolOutFile.4872 | LC_ALL=en_US.UTF-8 /opt/novell/sms/bin/nbackup -xvF -U "root" -r "Daten: /media/nss/D4/Test3/"
D, [01-08-2011 14:33:23#4872] DEBUG -- migfiles: Calling function doCmd
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined at
D, [01-08-2011 14:33:25#4872] DEBUG -- migfiles: Checkpoined pair 0
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:VOLDATA.TDF
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Received error: 0xfffdffdc ((libtsafs.so 6.50.0 291) An invalid path was used.) from NWSMTSWriteDataSet
E, [01-08-2011 14:33:25#4872] ERROR -- migfiles: nbackup: Failed to restore: DATEN:tsa5up24/NWTAPE/NWTAPE.CDM
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: Failed to restore data. Could not find destination path. If the destination path is a cluster resource, then check whether the resource is moved.
F, [01-08-2011 14:33:25#4872] FATAL -- migfiles: nbackup: Received error: 0xfffdffe5 ((libtsafs.so 6.50.0 282) The data set handle is invalid.) from NWSMTSOpenDataSetForRestore
Thank you
Andreas

HT4901 Why does OS X have this poison pill? What if iCloud isn't working one day; isn't it a security feature to keep a copy on the local machine?

Why does OS X have this poison pill? What if iCloud isn't working one day; isn't it a security feature to keep a copy on the local machine?

Thank you Julian and Csound1. Please help me understand these two messages that I get when I try to sign out from iCloud:

IFolder keeps prompting upgrade after OES2 SP3

Hi everyone,
After applying OES2 SP3 our iFolder server keeps prompting upgrade on
Windows XP clients. It suggests upgrading to 3.8.0.4 but when you let it
run, it shows windows installer options install and uninstall, there is
a space where the upgrade button should be. Neither option works.
I've also downloaded from the web server page the ifolder client, but
doesn't seem to be that version number.
Is there any way to disable the annoying prompt?
Thanks,
Miguel.

Originally Posted by mcando
Is there any way to disable the annoying prompt?
Thanks,
Miguel.
Section 6.12 of the iFolder 3.8.4 Admin Guide lists a way to disable the upgrade prompt.
Edit the unix-version.config, mac-version.config, and/or version.config (aka windows-version.config) files located in either /opt/novell/ifolder3/lib/simias/web/update or /opt/novell/ifolder3/lib64/simias/web/update.
Replace the <version> </version> section of the .config files with the level of client your users already have. Then they should not be prompted to upgrade.
Andrew

OES2 SP3: Master sends poison pill upon creation of new volumes

Similar Messages

Maybe you are looking for