Off camera shoe cord recommendations sought

Any good recommendations for a cable to connect a canon 1d (iii) to a 580ex flash?
Some of the reviews below complain about breakage:
http://www.amazon.com/review/product/B000OEP3F4/ref=cm_cr_pr_link_2?%5Fencoding=UTF8&showV iewpoints=0&pageNumber=2&sortBy=bySubmissionDateDescending

I used a similar Canon speedlight cable with my EOS 620 and 420EZ flash. Never had an ounce of problem.
Sounds like Canons CC has slipped over the years. I bought the adapter in 82, and used it regularly through multiple weddings, etc (bracket mounted) up until a couple years ago when I switched to digital.
For curiosity sake, I just pulled it out of my retired camera bag for a quick look-over and the cord and adapter ends are still in excellent condition, save for a few scoff marks here and there...

Similar Messages

  • Canon Speedlight 270 EX as a macro off camera flash?

    Hi,
    I´m considering to buy tomorrow, a second hand unit for a nice price (+-50,00 USD) of the older Canon Speedlight 270 EX (not the version II) as a macro off camera flash?
    The bounce head feature seems a nice way to use for my macro subjects (for bounce light) or direct light with the flash upside down/belly up firing to my subjects directly.
    My question is this:
    1.
    can I use this older unit with a flash cord?
    (This flash isn´t capable of wireless/infrared communication. So only with a ETTL cord I guess).
    2.
    which Canon cord should I use?
    As an example you can check macro DYI rigs using both 270EX and 270EX II unit.
    Mine will be the older 270EX (version I)
    http://orionmystery.blogspot.pt/2010/12/more-macro-rigs.html
    My macro rig is Canon 5D Mark III+Canon MP-E 65mm macro and 100mm L macro.
    Thank you very much for your help.

    Any "Off Camera" OC-E? cord will do the job. They allow exactly the same function as mounting the flash directly in the camera's hot shoe. I use OC-E2 and OC-E3 interchangeably.
    The only significant difference between OC-E2 and OC-E3 is the way the end locks onto the shoe... the E2 uses a "dial" type fixing mechanism you tighten, while the E3 uses a lever mechanism. The E3 was redesigned to be more water/dust resistant, at the same time as the 580EX, 430EX and some other flashes were intro'd with a similar mounting foot.
    Alan Myers
    San Jose, Calif., USA
    "Walk softly and carry a big lens."
    GEAR: 5DII, 7D(x2), 50D(x3), some other cameras, various lenses & accessories
    FLICKR & PRINTROOM 

  • Phottix Ares won't trigger my off camera 430 ex II when using iPhone EOS remote app!

    I have a Canon 6D, a canon 430ex II and a set of Phottix Ares transmitter and receiver. I have set up my flash off camera and was planning to use the camera’s wifi capability to take a self portrait with my iPhone EOS remote app, but the flash wouldn't fire at all. When I turned off the app and phisically pressed the shutter it worked but never through the app. Then I thought of mounting the 430 directly onto the camera, used the remote app to shoot wirelessly and I was surprised that it worked!!! I coudn't find the logic behind this and I tried to find an answer everywhere with no hope!
    Has anyone gone through tha same experience or have any explanation or solution to this problem? or any alternative solution to get the flash to trigger while shooting wirelessly? thanks.
    [Mod note: Moved to "EOS" because issue seems to be with the EOS App. You'll get more exposure here!]
    Solved!
    Go to Solution.

    If you are shooting using Live View (through the app) it won't fire the flashes like that.  But if you just use the app to release the shutter and review the pics it will.  It's been awhile since I've used the app, but there's a button or something to go between live view and standard shooting.
    That said, I've read that some cameras can work around this by going into the menu and disabling silent shooting, and then Live View will work with simple triggers.  I've never done it as I don't shoot in live view, but I've seen this discussed a lot.  Not sure if the same can be said for the app, but it's worth a shot (no pun intended).
    http://www.p4pictures.com/2011/02/live-view-mode-and-flash-on-your-eos-dslr/

  • Is there a way to use an off camera flash or remote flashes on a Rebel T5? (This is not a T5I)

    I have a Rebel T5 I just bought a few months ago. I like it as it is a great entry into DSLR. I will be looking at upgrading in a few months. But in the meantime, I just bought a speedlight kit (not Canon) and it came with 2 speedlights and the remote trigger and 2 remote receivers. Is there a way to enable the camera to use off camera flash? i was able to put one of the flashes on as an extrenal flash but I have not been able to figure out how to enable off camera flash.
    Solved!
    Go to Solution.

    Thank you Skirball. It did come with a trigger. I must not have had the correct settings. When I first got the set, I put the trigger on the camera and hooked the lights to the receivers and it did not work for me. I thought I needed a special setting. But I must have had the receivers set to camera instead of flash. Once I put it on today, it worked and triggered both flash units. Incase anyone else has this issue, the kit I bought from Amazon is the Altura 2 flash kit that came with 2 speedlghts, the trigger and 2 receivers. I paid $169 for it. But when I hooked them up today and had the receivers set to Flash, they both were triggered when I pressed the shutter button.
    Thank you again.

  • Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigge

    Running an old MacBook Pro 2.5ghz core 2 Duo. Battery went chemical meltdown and expanded out of its housing. Removed it and was running off the power cord. This worked for a while. Now it won't start up. Have a Replacement on order. Is there a bigger issue or does a battery need to be in the compartment to boot up? Appreciate any help. Thanks.

    Working battery needs to be in for the computer to function.

  • How to turn off Camera Raw in Photoshop CC?

    How do I turn off Camera Raw in Photoshop CC?  When I am trying to open an image from Bridge CC it automatically opens in Camera Raw.  I've tried everything I know to turn that feature off ... and I know it is just a matter of know what button(s) to push :}

    Thank you, Jim ... I knew that ... just had a brain cramp I guess

  • The first time I ran the App store it came up with recommended apps to download.  Is there a way to get that back?

    The first time that I ran the App Store it came up with recommended apps?  Is there a way that I can get those recommendations to come back up?

    if you're not connected to wifi
    or have a data plan enabled on your phone this is what it's suppose to do

  • How to turn off camera sound on Nokia E5

    I cannot turn off camera sound on Nokia E5-00. Who can help me?

    @navbond007
    Hi navbond007,
    Digital camera's do have a sounds when a picture is being taken but this noise isn't artificial like in mobile phones it is the shutter mechanism. Some digital camera's shutter makes a low or no noise but they do have a beep to give an indication that a picture is being taken. In countries where this is compulsory by law it should give some indication that a picture is being taken.
    Also please take into account one device is a phone and the other a dedicated camera.
    Regards
    Raoul_Duke
    If you find this post helpful, a click upon the white star at bottom would always be appreciated.
    If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

  • How to turn off camera shutter sound

    how to turn off camera shutter sound on iphone5?

    You're getting different answers because different countries have different rules. In some places Apple is allowed to turn off the camera sound when the device is put on mute. In others, because of privacy concerns, Apple is not allowed to do so. Whenther you can or not depends on where you are. If mute doesn;t do it for you, you probably cannot turn it off.

  • How to turn off camera sound lenovo s6000

    how to turn off camera sound lenovo s6000?
    thank you

    well , you're right, but the law argues that a digital camera looks like a digital camera so it's easier to spot by the person being photographed. also, a digital camera has no other function but to take pictures, so one can't assume it's being used for any othe purpose. on the othe hand, a phone can't be identified as a camera right away. so it's easier to take pictures of unwilling subjects.
    Fear not those who argue but those who dodge

  • I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    I have just bought a Panasonic Lumix compact camera. Aperture and Preview can't open the RAW files from this camera. Panasonic recommend downloading 'SYLKPIX Developer Studio SE' to save RAW file formats.How can Aperture and Preview read the files?

    Either use 'SYLKPIX Developer Studio SE' to develope the RAW files and to save them in another lossless format like TIFF, or try if Adobe's free DNG Coverter can convert your Lumix RAW files to dng. Then import the dngs. This way, your files will still be RAW files.  This works (most times) for my Lumix FZ28.
    Adobe DNG Converter 8.3  http://www.adobe.com/support/downloads/detail.jsp?ftpID=5695

  • Why photoshop elements 13 no longer can get photos off camera

    Photoshop elements 13 worked fine for awhile but now I have issues. I cannot get pictures off camera or hard drive to put into organizer. I run windows 7. like i said it worked fine up until about 2 weeks ago. I'm 59 years old and not familiar with some things
    Am new to forums also. Not real familiar how this works.
    Sorry and Thanks for any help

    What changed in the last two weeks?
    You could try System Restore.

  • Not recording when switch off "camera sounds" option

    Hi,
    When i switch off the option in french "Désactiver le
    bruit de l'appareil photo" (switch off camera sounds ?) so the
    "clictch" camera sound each time a new picture is take, .. then
    Captivate don't captivate anything.. i just have the first image
    and that's all... !
    Using this "clitch" sounds is absolutly not professional for
    the purpose we should do !!
    with the export problem, we are not really happy of this new
    version of Captivate for now !!

    Hi cyborgjeff
    Unless you are recording your narration at the same time as
    your main movie (which is not best practice, but to each his/her
    own) you won't hear the shutter sound in your resulting movie. Did
    you double-check to ensure you have the "Enable auto-recording"
    check box selected?
    Cheers... Rick

  • Pavilion dv6- turns off when power cord removed

    There's a certain way I can unplug it where it doesn't shut off- but 99% of the time when the adapter is pulled out it shuts off. Has a new battery that shows 100% charged, and lasts a good hour if I can get it to stay on when unplugged. ONce it shuts off, it only comes back when the adapter is plugged in. Do I replace the adapter, battery (again), or something else?

    Hi @SavannahsDad 
    Welcome to the HP Support Forums!
    I understand that your notebook turns off when the cord is unplugged. I am happy to assist. If the battery is showing as fully charged whenever you do this it almost sounds as if there is a bad connection between the battery and the notebook.
    Here are some things you can look at for now.Computer Does not Start (Windows 7, Vista, XP)
    AC Adapter Battery Charging Indicator LED Does Not Display Immediately When Plugged In
    Battery Charging Is Not Indicated in Vista or Charging LED Does Not Turn On
    Improving Battery Performance (Windows 8, 7, Vista)
    Let me know if any of that is useful to you, or if you see any other symptoms.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • (Solved!) turn off Camera Sounds in Nokia Asha 305...

    http://www.techmesto.com/turn-off-camera-sounds-nokia-asha-311/
    click the link, you can see the how to, and link for download.

    Ignore the above post or download at your own expense.
    If  i have helped at all a click on the white star below would be nice thanks.
    Now using the Lumia 1520

Maybe you are looking for

  • In App Purchase -

    Hi I am working on a building an IOS app that will allow user to book and pay for In home beauty services. I would like to know of "physical services" are also part of In App Purchase  and we would have to payout 30% of gross revenues to apple . Than

  • Remote...How can you set the your amplifier to be the default volume?

    Does anyone know how to set your amp to be the default volume control without have to switch between devices to change the volume? Can you have 2 devices on the screen at the same time. Like cable box and the amp? i've had other sony remotes that wou

  • Nokia N8 Alarm Clock Volume Problem

    What is wrong with Nokia N8's alarm clock volume? I can not find anywhere to define the way it alarms (ascending, ringing, ...) and to set the volume. The default clock has the ringing alarm, but I want to set ascending alarm. Also I need cont down a

  • How to make an application scalable?

    Hello, Few years ago I have written a java application (J2SE) used to translate some requets from one protocol to another one (propriétary protocols). At that time, this applicaiton has been designed to process about 1000 requests per day. Now we wou

  • Hierarchy in separate columns

    Dear Friends: Is it possible to display the hierarchy in separate columns ? i.e. lets say there are 4 levels in my hierarchy, how can i display them in 4 separate columns thanks for your help