OFF-Cycle payroll error Resigned employee

Hi Experts,
I have a very typical problem here faced by the employee ;-
The scenario is this
Employee resigned during the last year , his payroll area changed to inactive
The last results available in the cluster for the employee belongs to period somewhere in june 2008 month of resignation
In the current financial year , company  wants to pay bonus to the employee.
So the employee was again put in to active payroll area with effective date 01..09.2009  for processing the payroll usiing 0267
In Infotype 0003 , the run up to date has been updated has 30.09.2009
in pa03 , the payroll control record has the status has the exit in the Aug-2009 , not yet released in Sep-09
so ideally , when wwe are processing the off-cycle after the above mentioned steps, it should process the payroll in off-cycle.
In the simulation it is processing, but coming with a message that                                                                               
" Payment date of payroll 04.09.2009 later than period end of next payroll  31.08.2009"
But when we try to finalise the cases it is throwing up the error mentioning the same.
We are not able to finalise the Off-Cycle payroll for such cases.
Anyone please can help me in this ?
Thanks & Regards
Srijit R Menon

Hi Sadhu / Sikandar,
Thanks  for the reply,
I checked with CYFRM , it is given as 1 only,
again , for the terminated employees the final run was made in the month they were terminated., in june-08
And while doing offcycle run does the payroll driver checks the past period resuts, i m not sure
even if it checks , the offcycle is allowing me in quality system with the same data ,  data in quality & Production is equal, as we have updated our quality system recently by copying the production.
In Quality its working , and not giving any errors and issues, the pa03 is also in the exit mode of aug-09 , the payment date is given as 04.09.2009 in 0267 . its allowiing me to simullate and final it
Kindly help

Similar Messages

  • Off Cycle Payroll error - not encountered during Payroll Simulation

    Hello,
    We've modified the Canadian payroll schema K000 by creating some new subschemas, rules and payroll operations to address calculation of the factor /801.  When running payroll simulation for a test employee, everything looks fine.  However when we run off cycle payroll for the same employee and period, we are encountering an error.  Checking the log of off cycle, it shows that it is also accessing schema K000.
    What could have caused the OC error?  is there a difference in what off cycle and simulation accesses?
    Thanks.
    Malou Navera

    I assume that you copied the K000 and create a new custom schema called ZK00 or YK00 or something else other than K000.
    Go to this table  V_T52OCV and set up an entry with
    CALC       RPCALCK0 PayrollVariantName
    "PayrollVariantName" is your variant with your custom schema for RPCALCK0.
    Or goto IMG
    Payroll: Canada
    Off-Cycle Activities
    Set up report variants for off-cycle activities
    Edited by: Amosha on Oct 4, 2011 9:30 AM

  • Off-Cycle Payroll Error for Bonus

    Hi Experts,
    I am getting one error while i am running the off-cylce payroll live run for the employees.
    Current payroll payment date 31.03.2009 less than last payroll payment date
    31.08.2009
    I maintained the payment date as 31.03.2009 in Employee master data..........and also in off-cylce  field also i maintained same date.
    i don't under stand where i am doing wrong.
    Thanks in Advance,
    KB

    Maintain the payment as off-cycle payable date  in the pc00_m40_bons.Then execute the program.
    For forther clarification open the new thread
    Thanks,
    KB

  • Off Cycle payroll error

    Hello Payroll experts,
    we have run actual payroll for an employee for the month of september(01.09.2008-30.09.2008) and now trying to run an offcycle payroll for a date 08.10.2008, but system is showing a message that payroll have already run for a future date (30.09.2008) for that employee hence that PERNR is not selected. I checked the clustur but in that the last result is on 30.09.2008.And my control record is on exit mode for that september period payroll.
    Can any one have some idea on these, pls help me
    Thanks in advance

    see 08.10.20008 how u have run offcylce
    are u sure

  • Error during off-cycle payroll

    Hello gurues,
       The user got an error while executing an off-cycle payroll, and I cant figure out whats the meaning of it and why is it happening.
       The message is very general, "Function has an incorrect value for parameter" 5P 411.
       If someone else went through something similar, please give me an advise.
    Thanks very much

    I assume that you copied the K000 and create a new custom schema called ZK00 or YK00 or something else other than K000.
    Go to this table  V_T52OCV and set up an entry with
    CALC       RPCALCK0 PayrollVariantName
    "PayrollVariantName" is your variant with your custom schema for RPCALCK0.
    Or goto IMG
    Payroll: Canada
    Off-Cycle Activities
    Set up report variants for off-cycle activities
    Edited by: Amosha on Oct 4, 2011 9:30 AM

  • Issue when running acutal Off-cycle payroll in India!

    Dear experts!
    I have an urgent issue when running ACTUAL off-cycle payroll in India as below: "Payroll already performed once in future".
    In testing mode, everything is fine. I have tried to check payroll result in pc_payresult and pu01, and Infotype 3. All of them show the last payroll in 31.07.2011. But now I run off-cycle payroll on 20.08.2011, this error is displayed. So I cannot run actual payroll for them.
    Please help me! I am really appreciated.
    Regards!
    Woody.

    Hello
    Normally this error message reflects an inconsistency in the payroll
    directory cluster, that you can view via RPUDIR00. What you can do to
    restore the consistency is to run the report RPUDIR00 for this pernr
    with the following parameters on the selection screen:
    Payroll for country                           
    Personnel number             
    Compare directory            
    Payroll results structure   
    detailed log                
    Save new directory             X          <  this will write the new directory.  If you want to test first, do not select this parameter.
    Afterwards it should be possible to run payroll for this employee.
    Thanks and Kind Regards
    Ramana

  • Off cycle payroll status/control record

    Hi,
    Is there anyway we can track for which employees off cycle payroll is in process? like the regular payroll run, will the employee be locked during off cycle payroll run? if not locked, editing their personal information (personal data, bank, address etc.,) will cause trouble?
    This question is on the technical front. Appreciate your inputs.
    Thanks

    Hi Karthik,
    There will be no lock on payroll as Off cycles are performed when control record is in Exit Payroll status.
    If employee data is being edited during live off cycle run, you will receive message as error that employee is locked and will not allow payroll.
    In order to avaoid this situation of editing master data you can use off cycle workench transaction PUOC_10 which sets lock on employee during payroll run for off cycles resulting in no user to edit master data for employee.
    Thanks,
    Ameet

  • OFF Cycle Payroll (0267 Infotype)

    Dear Experts
    How to run off cycle payroll for group of employees
    if  i run off cycle using standard code PC00_M99_CALC for KSA , System not not processing the 0267 which trigger processing error Determine recurring payments/deductions for period from 1432/12/21 to 1432/12/21
    Note : maintained infotype 0267 properlly which is available in p0267
    Kindly advice me how to run offcycle for all employee at a time
    Thanks
    Thiu

    Hi,
    For Off cycle payroll required
    1. Payroll area should be in Exit mode of Last pay period.( If you are running no of payroll areas check with all payroll areas and select all payroll areas in selction mode)
    1. Payroll reason (in IT0267 should be maintained) 
    2. Payroll type, Payroll Identifier (based on business process) Date of off cycle run.
    When your excute the payroll it will take all the employees in particular date only.
    Note: If you are the End user feel free contact the payroll consultant or Refer the End user document.

  • Off Cycle Payroll

    Dear Experts;
    If an employee worked for example from 01.01.2009 till 05.01.2009 then he took a paid leave for about 10 days then he joined on 15.01.2009, and before he left he asked to get his salary for those 5 days that he worked and for the leave days.
    So we ran 2 Off-Cycles payroll one with the absence reason and another with a regular reason. So the regular off-cycle will make exit for the payroll for this month for that employee.
    How can I run him his payroll for his working days from 15.01.2009 till the end of the month?
    Can any one help.
    Thanks for your cooperation.
    Best Regards;
    Lobna

    Thanks experts I reached the solution.
    In the Off-Cycle I'll make correction payroll
    This function enables you to make an immediate correction payment if an employeeu2019s master
    data or time data is changed. The employee does not then have to wait until the system
    automatically carries out retroactive accounting with the next regular payroll run

  • Off-Cycle Payroll Run with reason Absence.

    Hello
    We are trying to execute Off-Cycle Payroll Run with reason Absence, however the /559 and /560 are showing Zero amount.
    We are running it via Offcycle workbench. Would it really make a difference?
    Here are the main configurations I have done:
    1. We have executed the regular payroll run for past one month (Jan 2010).
    2. We have maintained a 10 days absence for next month (Feb 2010)
    3. The Absence valuation is configured to generate WT 3000, in which I am able to pull the number of absence hours.
    My question is how to I get the per hour rate multipled by number of absence hours AUTOMATICALLY. I am looking to do it with configuration instead of PCR. Any thoughts?
    Scenario: Current month (Jan) regular payroll is over, and employee applied for half month leave in next month(Feb). Now, employee wants to take salary for those 15 leave days before going for leaves.
    Thanks
    Yash

    Hi Yash,
    I am not sure, if this functionality can be achieved without a PCR.
    I guess you need to write a PCR for this....
    Still you can try this using constants dependent on wage types path is IMG ->Payroll->Time Wage Type Valuation->Valuation Bases->Constant Valuation Bases->Constants Dependent on wage types.
    I have a question here, if you are paying the employee for the half month of absence before he took the leave, how will the system know when you run the regular payroll for him at the end of the month that employee already got paid for the half month absence?
    You should make sure that system doesnt pay him twice......
    Thanks,
    Janga K.

  • Off-cycle payroll rule

    Hi,
    The user of my project is asking for that when he executes an off-cycle payroll (and leaves the employess' number blanck), the payroll only be processed for the empleyess that have a valid register in infotype 267 (with valid I mean; same off-cycle reason, payroll type and payroll identifier for the date of the payroll).  
    Anyones could give me a clue about how to check in the scheme if an employee has a valir register in IT 267 for that off-cycle payroll? so that I can filter it and no table is updated with the info of that payroll??
    Hope that was clear enough! =)
    Thank you VERY much!!!!

    If you make the wage type applicable for IT 267 only then you can query by WGTYP?XXXX and place it after P0267 to get that processed.

  • Problem regarding off-cycle payroll

    Hi experts,
    I have question about of-cycle payroll. This is the first time I want to run off cycle payroll
    1.I hired one staff after payroll run this month. If 'mI using infotype 0267 , Do I have to maintain infotype 0008.
    For example, this staff should get salary $5k.After prorate, for this month, he will only get $1k.If i'm using infotype 0267, I will 
    key-in $1k manually. But do I stil have to key-in $5k in infotype 8.
    2.I have finished process payroll for this month. So I exit payroll. If I want to run off-cycle payroll, do I have to release back  payroll.If I release back payroll,payroll period in PA03 will show 11/2010. Is it ok to run off-cycle for this month? (payrol first, then off-cycle)
    3. How about if I want to run off-cycle first before payroll. For example next month, I will release payroll.  Payroll period in payroll control will show 11/2010. After finish off-cycle, I have to exit payroll. So how, to run payroll. If I tick release payroll, payroll control will be 12/2010.(off-cycle first, then payroll)
    4. If I want to pay advance, can I configure so that I don't have to maintain infotype 8. For example, one staff get paid $5k. If i pay advance in infotype 267, let say $1k. I have to maintain $4k for this staff this month. Is it any config that I can maintain $5k in basic pay. This is because I want to pay advance for 5 thousands staff. After that, I have to change infotype 8 to make sure the basic pay will deduct this advance. I think to change all 5 thousands staff is too messy.
    5. To run off-cycle, what is the best infotype to maintain, 15 or 267
    6. I want to pay advance for staff. Let say, the staff salary $5.5k. After statutory he will get 5k. I want the advance to deduct statutory. For example, let say advance$1.2k, he will only get$1k after statutory. How about if I want to pay advance without deduct statutory.

    Hi Mj,
    1) Yes, you need to mainatain IT0008 , since it is reuuired to generate WPBP.
    2) No for processing payroll one shoudl not release payroll period.  Pre-request is to have last payroll period in EXIT mode.
    3) As i sad its not requred to release payroll for offcycle procssing
    4) For making advance, some sap standard program are provided. Please try to explosure same.
    5) Its always IT0267
    6)  No Idea Sorry.
    Thanks
    Yogesh

  • Can an off-cycle payroll result deleted without deleting current result?

    Hi all,
    I want to delete an off-cycle result dated 06.10.2008 without deleting current payroll result.
    Is it possible? if yes, what is the tcode or report for this?
    To elaborate the need to delete,
    Bonus has been paid on 29.09.2008 with correct amount. Due to some reason this record has been over written to 06.10.2008. That's why system is deducting bonus amount paid as per 29.09.2008 from gross salary in the form of /552 - Stat. Net Subsequent adjustment. October payroll has been run and exited. we have found that in many cases, bonus amount has been recovered and net amount mismatches with gross-deduction in the payslip.
    We think, if we can delete off-cycle payroll result on 06.10.2008 and correct IT267 as per 29.09.2008, then system will paid back in the November pay run.
    Please suggest what is the best way to tackle this scenario?
    Suitable answers will be rewarded.
    Thanks
    rajesh

    Hi,
    This is impossible to delete.
    What I understand is the IT0267 record is being overwritten after the Bonus run is exited. Right?
    If is it so then have U able to found out How?If U have found out then share this so that a proper solution can be suggested.
    Anyways revert the over writing by putting all the bonus amout back to 29th and delete 06th ones and run the payroll for next month..System will again adjust the things in a retro run.
    ~BiSu

  • Off Cycle Payroll run

    Hi All,
    What do you mean by Off-cycle payroll run.
    Can you briefly explain me about tha?
    Thanks in Advance
    Kiranmayee

    Hi,
      Please refer to <a href="http://help.sap.com/saphelp_erp2005vp/helpdata/en/dd/38a63a04227748e10000000a11402f/frameset.htm">offcycle</a>
    Regards
    Bala

  • Off Cycle Payroll Issue

    Hi Gurus
      I  Ran off Cycle Payroll and got Result.
      then Ran Regular payroll but the OffCycle Payroll Also running and amount is Added in net in Regular Payroll.

    Dear Skindar
      We have done as you mentioned only
    The Scenario is
    We Are going live by running April to Augest2011 live payroll and for Sep2011 We are going to Post in FI.
    I.E April to Aug2011 no FI posting.
    We Ran  20.04.2011 off Cycle by keeping Control Record in Exit Mode in mArch2011
    Then Ran regular payroll April2011, here it is running for two periods. (Off Cycle and Regular)
    Kindly advise me in this

Maybe you are looking for