Off cycle- work bench

hi, experts,
please help me how to use off cycle workbench.
i read the document but unable to understand. if possible please explain the same with an example.
points assured.
thanks and regards,
madhu

Hi,
This may help:
http://help.sap.com/printdocu/core/Print46c/en/data/pdf/PYUS/PYUS.pdf
Reward points if helpful,
Thank You,

Similar Messages

Void multiple PY checks not through off cycle work bench

Hello,
We had a scenario where we had to void nearly 60 regular PY checks in our previous period. The postings to FI did not happen yet. We went to off cycle work bench and voided 60 checks one after the other.
Is there any quicker way to void multiple PY checks (If we know the check number to void). What if we run into a scenario where we need to void few hundreds.
Any advice is greatly appreciated.

Hi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen

ON Deman Payroll Run through off-cycle work bench

Dear Gurus,
I am using Off-cycle payroll On DEMAND REGULAR payroll run through off-cycle work bench with the help of T-Code PU0C_99. Now i have given payments in IT0267 (OFF CYCLE INFOTYPE) but i am observing that P0267 function is removing all the components in the output table. If i see the INPUT table of the function then I can able to see my components but in the OUTPUT table function is removing the components.
My doubts are
1. Is it because it is ONDEMAND Regular payroll run function is reading the payroll type (A)and removing it from OUTPUT table?
2. If I processed the is ONDEMAND Regular LIVE payroll run then for posting to accounting program do I need to enter anything in the selection screen?
3. Presently I am not entering anything system is picking the latest payroll results and posting the corresponding entries?
Thanks & Regards
Priya Latha

Hi Priya,
I feel you have got answer of this query.... as it was processed through another thread. I will request you to close this thread as for a question 2 threads are there. And if moderator will see it then they may block the thread.
- Praveen

Runtime error in off-cycle work bench

We are trying to see the rem statement in off-cycle workbench and getting an runtime error dump as (The current ABAP program "SAPLHRFORMS_CALL" had to be terminated because it has come across a statement that unfortunately cannot be executed).
Any suggestions on this would be much appreciated!!!
Thanks
Sreeni

Thanks Ramana,
Actually we have an issue with Tcode PUOC_13 for australia people in off cycle workbench.
Can you please let me know if any specific note for australia?
Thanks
Sreeni

Off Cycle Work Bench Error

Hello,
My client was processing a replacement check, and she recieved the error: " No Payment Selected from Preliminary Data Medium Exchange Program"
I manually tried running the DME program, but she is still unable to process the replacement check.
Any help on this would be great!
Thanks.
Shaz M

The replacement goes as below.
1. You replace in off cycle workbench by selecting the payment which generates ID usually starting from CXXXX.
2. Next step you run it from PUOCBA (process model).
SAP already provided the standard process model for replacement. Copy and modify as per your requirement.
Arti

Out of sequance reversal on the off cycle work bench

HI All.
We have a scenario where we have a cash payments to the employees which creates the WT/557 instead of /559. The GL posting is done and everything was fine. Then we realized that we paid an incorrect payment so we reversed out the payroll results then it created /569 instead of /571. I ran the next payroll because of the reversal system has gone to retro and re evalute the reversal period. When I am trying to do the GL positng I am getting an erro saying __"customizing for Wage type /569"_* has been changed*._ I am totally stuck at point since we did not chang any thing related to /569
Any help is appreciated
Thanks in advance for the help...
Regards,
AR

Whenever there is Reversal in payroll post /571 will come up, which is a reversal of /569.
Pls check the processing class of /569 which is having only 6,25,30,31 and 32 with 0 specification also check for /571 where PRCL 23 is having 2 specification and 6,25,30,31 and 32 with 0 specification.
Hope it helps you
- Ashish
Edited by: Ashish Bhati on Dec 23, 2009 12:19 AM

Run javascript in adobe live cycle work bench

Hi All,
Is there anyway we can execute the javascript in workbench?
or is there any method to convert javascript to adobe script(execute script activity)?
Actually i have written javascript in live cycle designer while pdf designing. now i want the same javascript at server end.
Kindly someone help me to get this functionality.
Regards
Abhishek

Hi Jasmin,
Thanks for your quick reply.
I have a javascript which generate sha1hash output for input string.
I am getting an error while executing it in workbench.
If i want to use same algorithm in execute script how can i able to use it.
How should i convert this code in java?
Please find the javascript below for sha1hash algorithm
function sha1Hash(msg)
    // constants [§4.2.1]
    var K = [0x5a827999, 0x6ed9eba1, 0x8f1bbcdc, 0xca62c1d6];
    // PREPROCESSING
    msg += String.fromCharCode(0x80); // add trailing '1' bit (+ 0's padding) to string [§5.1.1]
    // convert string msg into 512-bit/16-integer blocks arrays of ints [§5.2.1]
    var l = msg.length/4 + 2; // length (in 32-bit integers) of msg + ‘1’ + appended length
    var N = Math.ceil(l/16);   // number of 16-integer-blocks required to hold 'l' ints
    var M = new Array(N);
    for (var i=0; i<N; i++) {
        M[i] = new Array(16);
        for (var j=0; j<16; j++) { // encode 4 chars per integer, big-endian encoding
            M[i][j] = (msg.charCodeAt(i*64+j*4)<<24) | (msg.charCodeAt(i*64+j*4+1)<<16) |
                      (msg.charCodeAt(i*64+j*4+2)<<8) | (msg.charCodeAt(i*64+j*4+3));
    // add length (in bits) into final pair of 32-bit integers (big-endian) [5.1.1]
    // note: most significant word would be (len-1)*8 >>> 32, but since JS converts
    // bitwise-op args to 32 bits, we need to simulate this by arithmetic operators
    M[N-1][14] = ((msg.length-1)*8) / Math.pow(2, 32); M[N-1][14] = Math.floor(M[N-1][14])
    M[N-1][15] = ((msg.length-1)*8) & 0xffffffff;
    // set initial hash value [§5.3.1]
    var H0 = 0x67452301;
    var H1 = 0xefcdab89;
    var H2 = 0x98badcfe;
    var H3 = 0x10325476;
    var H4 = 0xc3d2e1f0;
    // HASH COMPUTATION [§6.1.2]
    var W = new Array(80); var a, b, c, d, e;
    for (var i=0; i<N; i++) {
        // 1 - prepare message schedule 'W'
        for (var t=0; t<16; t++) W[t] = M[i][t];
        for (var t=16; t<80; t++) W[t] = ROTL(W[t-3] ^ W[t-8] ^ W[t-14] ^ W[t-16], 1);
        // 2 - initialise five working variables a, b, c, d, e with previous hash value
        a = H0; b = H1; c = H2; d = H3; e = H4;
        // 3 - main loop
        for (var t=0; t<80; t++) {
            var s = Math.floor(t/20); // seq for blocks of 'f' functions and 'K' constants
            var T = (ROTL(a,5) + f(s,b,c,d) + e + K[s] + W[t]) & 0xffffffff;
            e = d;
            d = c;
            c = ROTL(b, 30);
            b = a;
            a = T;
        // 4 - compute the new intermediate hash value
        H0 = (H0+a) & 0xffffffff; // note 'addition modulo 2^32'
        H1 = (H1+b) & 0xffffffff;
        H2 = (H2+c) & 0xffffffff;
        H3 = (H3+d) & 0xffffffff;
        H4 = (H4+e) & 0xffffffff;
    return H0.toHexStr() + H1.toHexStr() + H2.toHexStr() + H3.toHexStr() + H4.toHexStr();
// function 'f' [§4.1.1]
function f(s, x, y, z)
    switch (s) {
    case 0: return (x & y) ^ (~x & z);           // Ch()
    case 1: return x ^ y ^ z;                    // Parity()
    case 2: return (x & y) ^ (x & z) ^ (y & z); // Maj()
    case 3: return x ^ y ^ z;                    // Parity()
// rotate left (circular left shift) value x by n positions [§3.2.5]
function ROTL(x, n)
    return (x<<n) | (x>>>(32-n));
// extend Number class with a tailored hex-string method
//   (note toString(16) is implementation-dependant, and
//   in IE returns signed numbers when used on full words)
Number.prototype.toHexStr = function()
    var s="", v;
    for (var i=7; i>=0; i--) { v = (this>>>(i*4)) & 0xf; s += v.toString(16); }
    return s;
Please reply for this
Thanks in advance.

Off cycle payroll Schema

Dear Consultants,
Where we will select customer specific Schema in off cycle work bench (PUOC_40), for regular payroll run we are using custom schema (COSM), but in Off cycle work bench am not able to select the Schema, can any one help on this please.
Thanks, Regards,
Naresh

Dear Praneeth,
I have created a new tax code
ZTDR: TDS on Irregular Payments
and I have assigned it to off cycle payment wage type in the table T7int9, in the schema I have taken BON1 is this correct ?

IPod Touch - continuously cycles Apple logo on and off - otherwise works

iPod Touch first model, 32 GB. this unit works fine, has latest OS updates and re-sets.
Still, when I turn it off it doesn't sit quietly - it cycles the Apple logo on and off continuously whether on charge or not. No way I've found to have it break the logo on-off cycle - repeats endlessly.
If I hold the "on" button the cycle will stop and the unit will turn on and run fine. When I turn it off the Apple logo (boot up) image begins to cycle (on for several seconds, off for several seconds) - continuously.
This unit has all latest updates, has been re-set, etc. Nothing seems to work to stop this blinking cycle. If not on charge the unit will run down completely. Pls. Help

thanks for your suggestion about using the power and "home" buttons at the same time to reset the unit. I've tried that route also many times with no change in the cycling activity. If I release the home button and hold the power button the Touch will turn on and function as normal. But no reset - restore with my Mac and iTunes, or solo, will stop this up and down cycling. It's right beside me now doing "it's thing."
STILL need help to cease this cycling until the battery either runs down or I place it on charge - at which time the cycling resumes.
Strange thing is that the unit works totally normally with mail, apps, internet, etc. when it's on, and it seems to turn off when asked - but then it starts this "reboot" activity endlessly.
Really will appreciate help with this - local Genius bar guy had no answer - "trade it in" he said.

My phone is stuck on the on off cycle. I've tried the "recovery mode" steps I found on several websites but it did not work. What do I do??

my phone all of a sudden shut off. When I tried restarting it, it showed the apple logo then drifted off again. It has continued this process for over 3 hours now, I have searched several websites for what to do and all have said it is in "recovery mode." I followed the steps listed on those websites and the phone is still doing it. At one point it showed the "low battery" screen so I plugged it in, it started the on off cycle again. please help!

Hi,
You could see if this helps...
DFU Mode / Unable to Update or Restore
http://support.apple.com/kb/HT1808
DFU Mode
Open iTunes and Connect the iPod to your Mac
Press and Hold the Sleep/Wake Button and the Home Button at the Same Time
After 10 Seconds release the Sleep/Wake Button until iTunes tells you it has Detected an iPod in Recovery Mode...
The Phone Screen will remain Black... Now Restore.
Backing up, Updating and Restoring
http://support.apple.com/kb/HT1414

Oracle Work Bench - MS SQL to Oracle

Hi,
I am using oracle work bench for migrating MS SQL database to Oracle 8i. When i am trying to migrate the Stored procedures with cursors, i am get expections. I am able to migrate tables and SPs (which don't have any cursors in it). I will cite an example for better understanding. Assuming the following is SP in MS SQL
create or replace procedure test1
@id varchar(20)
as
declare @cur1 cursor
if @id = '1' then
begin
set @cur1 = cursor scroll KeySet for
select test1 from table_test
end
else
begin
set @cur1 = cursor scroll keyset for
select test3 from table_test2
end
open @cur1
close @cur1
deallocate @cur1
/* END OF PROCEDURE */
When i try to parse it using Oracle Workbench, i am getting the following exception in log.
"Error occured at line 4: OracleWorkBench.sa.test1; oracle.mtg.sqlserver7.parser.ParseException: Parse error at line 4. Encountered: Declare"
Any help is greatly appreciated.

Sadigue,
The Workbench uses an underlying repository, so all the choices you make are saved. However the primary usage of the tool, is one off migration, not continous migration. If you want to rerun multiple times, you should probably generate the offline schema and data migration scripts.
Donal

FM HR_GET_PAYROLL_RESULTS off-cycle

Hello.
I'm reading the payroll results with the FM HR_GET_PAYROLL_RESULTS.
It's working fine, but I does'nt have the Off-Cycle runs in my result table.
How do I get the Off-Cycle runs with this function?
CALL FUNCTION 'HR_GET_PAYROLL_RESULTS'
    EXPORTING
      pernr                     = pernr-pernr
      pabrj                      = '2010'
      pabrp                     = '01'
      pabrj_end              = '2010'
      pabrp_end             = '26'
      permo                     = 46
      actual                     = 'A'
Thanks.
Regards.

Dear Freinds,
           Could you please let me know why iam not able to get payroll results of Previous (P)through function module when i reading for februay month , only iam getting A results .
I require to the pass the parameters otherwise i will not get the records of the February only , i will get all the records if i dont pass the parameters i will get all the records which will not full fill my requiremtn ,
my requirement is that i have to pass the parameters only for the month of February only since i am checking against current record(march2009) to that February 2009 record as i have to check and difference between the two records, however i can see in the month of February i have two records
one with P and one with A . I am not able to get the details of P iam getting only the records of A only.
Please help how i will get the the two records of February when iam passing the dates of February only.
Regards
madhuri.

Off Cycle Payroll

Dear Experts;
If an employee worked for example from 01.01.2009 till 05.01.2009 then he took a paid leave for about 10 days then he joined on 15.01.2009, and before he left he asked to get his salary for those 5 days that he worked and for the leave days.
So we ran 2 Off-Cycles payroll one with the absence reason and another with a regular reason. So the regular off-cycle will make exit for the payroll for this month for that employee.
How can I run him his payroll for his working days from 15.01.2009 till the end of the month?
Can any one help.
Thanks for your cooperation.
Best Regards;
Lobna

Thanks experts I reached the solution.
In the Off-Cycle I'll make correction payroll
This function enables you to make an immediate correction payment if an employeeu2019s master
data or time data is changed. The employee does not then have to wait until the system
automatically carries out retroactive accounting with the next regular payroll run

OFF-Cycle payroll error Resigned employee

Hi Experts,
I have a very typical problem here faced by the employee ;-
The scenario is this
Employee resigned during the last year , his payroll area changed to inactive
The last results available in the cluster for the employee belongs to period somewhere in june 2008 month of resignation
In the current financial year , company wants to pay bonus to the employee.
So the employee was again put in to active payroll area with effective date 01..09.2009 for processing the payroll usiing 0267
In Infotype 0003 , the run up to date has been updated has 30.09.2009
in pa03 , the payroll control record has the status has the exit in the Aug-2009 , not yet released in Sep-09
so ideally , when wwe are processing the off-cycle after the above mentioned steps, it should process the payroll in off-cycle.
In the simulation it is processing, but coming with a message that
" Payment date of payroll 04.09.2009 later than period end of next payroll 31.08.2009"
But when we try to finalise the cases it is throwing up the error mentioning the same.
We are not able to finalise the Off-Cycle payroll for such cases.
Anyone please can help me in this ?
Thanks & Regards
Srijit R Menon

Hi Sadhu / Sikandar,
Thanks for the reply,
I checked with CYFRM , it is given as 1 only,
again , for the terminated employees the final run was made in the month they were terminated., in june-08
And while doing offcycle run does the payroll driver checks the past period resuts, i m not sure
even if it checks , the offcycle is allowing me in quality system with the same data , data in quality & Production is equal, as we have updated our quality system recently by copying the production.
In Quality its working , and not giving any errors and issues, the pa03 is also in the exit mode of aug-09 , the payment date is given as 04.09.2009 in 0267 . its allowiing me to simullate and final it
Kindly help

What is "prompt for local work bench request"?

Hi..I am new to SAP BI.Just now I started Practicals on BI.I am creating Info Area,after giving the technical name and long description for the info area,it is showing another window as "prompt for local work bench request"and asking "workbench request".what does it mean?why it is not creating the info area??
Can anyone suggest me?
Thanks & Regards.

Hi,
Seems like your working on ideas version.
that prompt was pop up due to the standard transport procedure.
When we work on real systems, all newly created or changed objects need to capture into transport and need to move across the landscape(Dev-->quality-->prod).
You can turn off standard transport procedure.
log into BW, RSA1-->transport connection,
From Menu Edit--->transport--> switch off standard.
Thanks

Off cycle- work bench

Similar Messages

Maybe you are looking for