Off-line clips in Bin in use in Sequence?

I open a complex project and I'm told that two clips are missing. They appear as off-line in the Bin (red stripe over them).
I try to find the clips in the sequence, but it'll take me either 2 hours to listen through the movie, or perhaps even longer to enlarge the sequence and try to find any "white clips" in the Sequence.
So, is there any easy way to tell if a clip could simply be deleted from the bin, thus get rid of the "Missing files" message?
I might be able to find the original CDDA Tracks, but if they already are on disc and in use, I won't have to...

Put the offline clips from the Browser in the Viewer, then perform a match frame a few times in them... that should make the the playhead in the Timeline jump to the same frame... the match frame must be done with the Viewer active. You can keep the offline clips too, just tell FCP to ignore them when you open the project file then save... they won't be asked for anymore.
Jerry

Similar Messages

Off line clips; disappearing audio; and disappearing previews

My main computer has been in the shop for 2 weeks, so I have been using a laptop (dual core, 1.5 gig ram and with XP). It has a single partition with 30% free space (with most video clips stored on a removable hard drive). I have not yet downloaded the upgrade for CS3.
I have encountered 3 major problems with Cs3 on this computer that hasnt existed on my other computer. Every time I reload the project, the previews disappear from the timeline -but they are still in the preview folder; and I need to re render. The two clips that are overlaid on other clips immediately go off line; but they reappear when moving the clips away from their position and back again. Now in new problem today, some of the audio has mysteriously disappeared when previewing in real time. The audio woks, but not when real time previewing. (The audio worked fine yesterday.)
Any suggestions?

Updating should fix both problems.

How do I connect to computers that are being used in the lab, but have no address listed on the "all computers" screen and say "off line" while they are being used?

Thanks for any help I can get. I'm the new guy here at school, and did not set up the system, so I'm not familiar with any of the individual steps for correcting problems. My question is listed in the window up top.
Jim

Thanks for the response. I tried to find out what you asked. For example:
1. Computer #35 is listed on the "all computers" screen but says "access denied", "not authorized", right click for " get info" has no administrators listed, and I don't know how to add my computer as one.
2. "Scanner" screen # 35 is not listed either in "Bonjour", or "Local Network" (ethernet interface)
3. "Scanner 2" screen - same.
4. "Scanner 3" screen - same.
5. "Computer Lab" screen #35 is listed, but says "off line", "access denied"
I hope this gives us somewhere to start and go from there. Thanks.
Jim

Random photos dropping off line

While working on a sequence, some of the photos dropped off line. Some times I can see the thumbnail on the time line, if I just touch the red "off line" clip. However, if I scroll down the time line (lets just say at 3:00 minutes), then go back to the original thumbnail photo (lets say at 1:30), it goes red again.
None of my photos were moved, and are intact at their same location. Even in "reveal in finder," shows them in the same location.
Why is this happening, and will this effect my final project when I export to a Quicktime movie?

I "right clicked" on the clip, then chose "reveal in finder." Obviously that doesn't reconnect the path.
That's right, this option only tells you where the file is located.
At the bottom of that list is Reconnect Media. You use the options to navigate to the original media then reconnect.
In the cascading menu: File>Reconnect Media is another way to do the same job.
Al

"media off-line" screen

When I opened my file (project) all of the audio and video clips were replaced with "Media Off-Line" clip. What's up?

L3101
Details, especially version of Premiere Elements, computer operating system, and etc are important.
Pending more information, you probably moved or deleted the source media that went into your project after you saved closed the project.
Another explanation is that you stored the project media on an external hard drive and, after you saved closed the project, something happened to the external hard drive (one example, drive letter changed).
Please check out the merits of the Project Archiver found under File Menu/Project Archiver with its Archiver and Copy options.
http://help.adobe.com/en_US/premiereelements/using/WS09e4b3c48f3a79fc19b622510385d4355c-7d cb.html
Thanks.
ATR

Off line files

When I went to work on my project this morning two things happened: I got a version of my project that's at least two weeks old and a message saying that 23 files went off line. The files were identified as "Sequence 1 Fin 0000004c, 52, 4d," etc. When I clicked on the tab to reconnect the files, a window appeared with all the files for my project and with the names I've given them, not the sequence numbers. None of them are highlighted (or dark or whatever the word is), so I can't click on them to get them rerendered or reconnected.
What do I do?!
Two things that may or may not be relevant:
1) After I finished and saved all my work yesterday, and closed FCP, I pulled out an FCP file from the trash and opened to see what it was. Satisfied, I closed and put it back in the trash. This is what is opening as my current project (actually, this does sound pretty relevant).
2) After the above, I downloaded the latest version of Quick Time.
Mac Pro Mac OS X (10.4.10) Final Cut Studio 5.1

Presumably you have your preferences set to open the last project file when you launch FCP? This would explain the older project opening.
When FCP opens, just close the (old, unwanted) project and navigate to the current one - if you have difficulty in finding it, use Spotlight.
Once all's working OK again, it would be wise to empty the trash (fcp will sometimes find and use files that are in the trash).
Quad 8GB. 250+500 HDs. G-Raid 1TB. NORTON. FCP 5.1.2. QT 7.1.3. Panasonic HVX200 Mac OS X (10.4.9)
"I've taught you all I know, and still you know nothing".

Merged Clips Appear Off Line Yet Are Successfully Linked In CS 5.5

Hi there. I just migrated a feature documentary from an edit suite in a local production company to my home. We're using Adobe Production Premium CS 5.5, I tried to migrate the project using the Project Manager function of premiere. But no matter what combination of options I tried it failed everytime. Huge pain!
Anyway, the whole thing is nearly up and running again - but there is a problem with some of the merged clips. We were shooting on DSLRs, with a Zoom H4N dual audio system. Dual Eyes was then used to synch the clips. Which were then merged with the relevant video files in the various relevant bins.
Here lies the problem, obviously I had to go and relink all the media files. Grand job. Thought I was all done but then I noticed, that when I was linking "merged clips" they weren't coming up properly in the sequences. Like, they were there in the bins. They would appear if double clicked in the source monitor. You could even do an old "in and out" and drag your selection into the sequence, and all the extra Dual Eyes audio synchs would be there and ready for use. But, the ones that were already in the time line were not picking up anything, they were just off line.
I find this stuff hard to explain so attached is a screen grab and some explanation below.
A - Shows the panels with the media successfully linked.
B - Shows it double clicked and opened in the source monitor.
C - Shows where it should be in the time line. But its not linking.

Just tried moving the source files and relinking - no luck what so ever.
Any other ideas?

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

I can't print wirelessly using Airport Express. I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not. I've tried several USB connectors, and several different ports on my USB hub; same result. I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

Hi,
I am currently replying to this as it shows in the iChat Community.
I have asked the Hosts to move it to Snow Leopard (you should not lose contact with it through any email links you get)
I also don't do Wirelss printing so I can't actaully help either.
10:01 PM Friday; July 29, 2011
Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
 G4/1GhzDual MDD (Leopard 10.5.8)
 MacBookPro 2Gb( 10.6.8)
 Mac OS X (10.6.8),
"Limit the Logs to the Bits above Binary Images."  No, Seriously

I seem to have multiple problems related or unrelated. I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line. My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there.
My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from.
When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems. Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe. I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
S

Mail troubleshooting - Yosemite
Troubleshooting sending and receiving email messages
Troubleshooting sending email messages
SMTP servers keep going offline

How can I use an WebDynpro application off line?

: Hello,
I am developing a normal WebDynpro application to publish on my portal. I would also like to use this app on my mobile engine (so I can use it off line) . What do I need to change of my WebDynpro application for it to work in the mobile client? The MC comes with tom cat light is there a way to deploy de webDynpro libraries for tom cat ?
Any help is great help
I am using :
WebAS 640 sp 9
MI 2.5 sp 9
Windows 2000 + mobile client
Thank you in advance,
Guy

Hello Guy,
I am afraid that Gregor is right: WebDynPro is a complete online solution and has neither the aim nor the ability to become available offline. Ms Karin Schattka (SAP Product Manager WebDynPro) stated this very clearly in her TechEd04 presentation, which is available in SDN as well.
To employ offline applications you can choose from the Mobile Business Solutions portfolio that SAP offers for it's "Mobile Infrastructure" which is part of Netweaver 04 and later. Several applications are available, such as Sales, CRM, AssetMgmt and Mobile Time and Travel.
If nothing fits your needs you can develop your own applications using the MI framework. These are the options you have but unfortunately they have nothing to do with WebDynPro and No, there is no way to generically take Netweaver Portal content offline, as the portal (like WebDynPro technology) follows an online-only strategy.
Best regards,
Tim

Archive Web Page for Off Line Use

Hi all,
I'm currently enrolled in an online music program where I have to review/study web pages for my course instruction. These pages contain standard HTML text, graphics, mp3s, multiple flash applications and quite often embedded quick time movies. To date to back these pages up I have physically printed each page and then discretely downloaded and saved all mp3s, flashes, and quick time movies. However, as I'm sure you can guess, this leads to a very disjointed "archive" of paper product, separate quick time movies, and flash applications. So here's the question:
Is anyone aware of an archive utility that will save a web page like above in it's entirety onto my mac for off line use? I have seen a few web archive tools like I'm looking for, but all appear to be for Windows or older versions of mac OS. So any direction would be much appreciated.
Thanks,
Rick.

Hi
Welcome to Apple Discussions
Give this utility a try. The way this works. After you install the app. in your Applications folder, open it. A panel appears.
Then go back to Safari. Open the web page you want to archive. File>Save As. When the panel opens make sure the drop down menu is set to "Web Archive". Then go to the location where you saved that page. Move the web archive file onto the Utility's panel. This will create a folder with the various web components for that web site.
Also, either update your tag to your current version of OS X Leopard, or if 10.5.2 is correct, consider upgrading to 10.5.5 via Software Update.
Message was edited by: Hawaiian_Starman

I lost my iPad 3days ago. I tried to use "find my iPad" but always"off line"Idon't understand why always"off line" and how Ican get back my iPad!

I lost my iPad 3days ago. I tried to use ”find my iPad” but always”off line”Idon't understand why always”off line” and how Ican get back my iPad!

Two possibilities:
1. Maybe it's not turned on.
2. Maybe the iPad is wiped (setup as new)

I have my Precious iPhone stolen, i can track it, it is off line, can i use the serial number to track it?, I have my Precious iPhone stolen, i can track it, it is off line, can i use the serial number to track it?

I have my iphone stolen, the iPhone 4s was stolen in July 2012 and activated the icloud, and still today the phone is off line and i cant track it. is it possible that a thief is using my phone and can i track it using the serial number?

mosaluc wrote:
... can i track it using the serial number?
No.
See Additional Information Here > http://support.apple.com/kb/HT2526

I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

I frequently use Lightroom 3.6 for tethered capture on location. If I sign up for Adobe cloud and upgrade to Lightroom 5, do I have to be online all the time to use it? In other words, can I still use the program off-line?

Yes.
The only difference is the installation method and the ownership verification. The program still is installed on and runs from your local machine. You only have to hook up to the internet every 60-90 days to verify ownership.
From the FAQ
Do I need to be online to access my desktop apps?
No, the desktop applications in Creative Cloud, such as Photoshop and Illustrator, are installed directly on your computer, so you don’t need an ongoing Internet connection to use them.
An Internet connection is required the first time you install and license your apps, but you can use the apps in offline mode with a valid software license. The desktop apps will attempt to validate your software licenses every 30 days.
Annual members can use the apps for up to 99 days in offline mode. Month-to-month members can use the software for up to 30 days in offline mode."

Use N95 speaker for headset sounds in Off Line mod...

I want to use my bluetooth headset as a microphone and my Nokia N95 as bluetooth receiver to hear my voice in the N95 speaker (not when I am calling).
If possible I like to use a function like this in Off Line mode.
Is it possible to hear headset sound in the phone speaker?
Is there any software for this function?

No, this cannot be done.
By attaching a bluetooth audio device, you're deactivating the phone's speaker anyway. This is hard-coded into the firmware.
Was this post helpful? If so, please click on the white "Kudos!" star below. Thank you!

Off-line clips in Bin in use in Sequence?

Similar Messages

Maybe you are looking for