Off Line / Missing

When photo has "The file named Lightroom 4-230jpg" is offline or missing showing how do I make it available for editting? Phil

Study this: http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
It's much better than a short answer.

Similar Messages

  • Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for usi

    Found 0 results for My browser is missing important items, the whole tool bar...., drop down menu to print, copy, work off line, file, save, book mark, history. I just installed latest foxfire on windows xp. Found some instructions but they called for using keys my computer doesn't have ( key in OSX There is no file, edit , history, help, tools, navigation, all the things your directions say to use. Also I always get hung up and the message a scrip is running. I don't know what thises scrips are but I sure don't need them.
    == This happened ==
    Every time Firefox opened
    == I just noticed it. It probably happened when I upgraded foxfire.

    <u>'''Can't see the Menu Bar'''</u> (File, Edit, View, History, Bookmarks, Tools, Help)?
    Turning the Menu Bar on and off is a new feature in version 3.6.
    ''(Linux & OSX see: [[Menu bar is missing]] )''
    <u>''Windows'' Method 1.</u> '''''Hold down''''' the key and press the following letters in this exact order: V T M
    <u>''Windows'' Method 2.</u> Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
    The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
    See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
    <u>'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars'''</u> under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
    <u>'''To display the Status Bar'''</u>, View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
    <u>'''Full Screen mode'''</u>
    http://kb.mozillazine.org/Netbooks#Full_screen
    Also see:
    ''' [[Back and forward or other toolbar buttons are missing]]'''
    '''[[Navigation Toolbar items]]'''

  • Files missing or off line

    I reciently downloaded dng files to a removable harddrive.
    I can see them in Lightroom (library)but get a message that they are off line or missing when I open the develope module.
    I can see them on the hard drive and when I attempt to import them LR says they are already there? I also noticed that about 300 of the dng files went to the harddrive without the jpg thumbnail.

    The photos have either been moved, renamed or deleted outside of Lightroom. If they have been moved outside of Lightroom (or if the drive letter has changed, which can happen on Windows computers), then you reconnect them via http://www.computer-darkroom.com/lr2_find_folder/find-folder.htm
    By the way, re-importing photos is almost never a good thing to do. It is almost always a bad thing to do. I would advise you to get this idea out of your mind.

  • Images missing or off-line

    when i want to go to edit in cs3 or to develop module, i get the  error message that images are missing or off-line, despite the fact that the images are still on my desktop as well as backed up on the external hard drive(which is turned on). help. also, is there any way to reconvert dng images back to raw or tiffs?

    If the image in grid view has a ? icon in the upper right then LR does not know where the source file is. Click on that icon and tell it where to fine the file. If all your images where moved outside LR then LR would lose track. You could also try to synchronize the folder if they are all in the same relative structure.
    Unless you stored the original RAW file in the DNG there is no way to get back to the original RAW. However, with very few exceptions all of the original RAW information is in the DNG file so there's no need to convert back.

  • Icon for on-line/off-line is missing

    T-Bird sometimes falls to off-line mode and I never know it until I try to send a message, tells me I'm in off-line mode and would I like to go back online. When this happen THE ICON SHOWING ITS OFF-LINE IS MISSING. At one time it was in the L/R corner. How do I get it back?

    From the menu bar select View-Toolbars and make sure the Status Bar is turned on.
    No menu bar? Press the alt key.

  • Reconnect with changed off-line media path

    Hi.  I've had my catalogued images on a network drive for several years.  Recently had a major failure and re-built the drive, re-loaded from backup etc. 
    Unfortunately, since the overall requirements for the drive had changed over the years, when re-building I didn't re-create exactly the same folder tree as before.  While all my images are there (30,000+) and in the same relative tree as when they were catalogued, they are one level higher in the overall tree.  As a result, the catalog (PSE7) doesn't marry up with the path to the folders and Organizer displays a red 'off-line' media icon for every single image.  (None of the images is marked as needing to be re-connected since Organizer thinks the problem is the media being off-line rather than it being on-line but with a different path.)
    With this many images, re-cataloguing the images isn't a realistic option.  What can I do to get Organizer to recognise the drive is not off-line media and that the images are all there but on a different path ?
    Thanks for any help.

    To cut a long story short ... the original network drive was a Maxtor in RAID1.  When one of its HDD died, it instantly became unbootable.  Support told me there were no user replaceable drives inside and that as it was out of warranty to throw it away !   What's the point of RAID1 if you have to do that ? 
    Instead I downloaded hacked firmware and rebuilt with two new HDDs, then re-loaded from a USB back-up drive.  Had been running fine again since.  But its NAS functionality is limited compared to modern devices and I wasn't prepared to repeat the exercise when a HDD died again.  So I bought a new NAS, moved the HDDs into it, re-formatted, and re-loaded my Catalog from the USB drive again (ie. not from the re-built drive but from a backup taken before it failed).  Downtime for the whole thing was about a fortnight which I could cope with.  But the new NAS has different reserved share-names (as well as a different volume #) so I couldn't use the original names that are in the Catalog and anyway I wanted to split the data between more than one share to exploit the additional functionality.  So when re-loading I put the images into a folder tree starting at the share-name root rather than one level lower.  I expected to have to do a lot of "re-connect missing file" operations. 
    Instead I found that Organizer doesn't think they are disconnected, but off-line, so doesn't allow you to try re-connecting them.  Starting over with the missing tree level re-inserted isn't an option because I can't create the same root share-names on the new NAS anyway, and its volume # will still be different.  What looks to be needed is a way to get Organizer to accept the folders are online and allow me to re-connect the images, as if everything had happened on a local drive, not a network drive.
    Any ideas gratefully received.

  • Reader Download for Off-Line Computer

    I would like to download the newest reader for use on an off-line computer.  Choosing "save" from the download window copied to my flash drive, but when I went to install it on my remote computer it terminated and my installation file was erased.  Is there something I'm missing?

    You can download the full installer for several versions of Reader from here:
    ftp://ftp.adobe.com/pub/adobe/reader/
    Message was edited by: Claudio González. Reason: correcting faulty link.

  • Off-line clips in Bin in use in Sequence?

    I open a complex project and I'm told that two clips are missing. They appear as off-line in the Bin (red stripe over them).
    I try to find the clips in the sequence, but it'll take me either 2 hours to listen through the movie, or perhaps even longer to enlarge the sequence and try to find any "white clips" in the Sequence.
    So, is there any easy way to tell if a clip could simply be deleted from the bin, thus get rid of the "Missing files" message?
    I might be able to find the original CDDA Tracks, but if they already are on disc and in use, I won't have to...

    Put the offline clips from the Browser in the Viewer, then perform a match frame a few times in them... that should make the the playhead in the Timeline jump to the same frame... the match frame must be done with the Viewer active. You can keep the offline clips too, just tell FCP to ignore them when you open the project file then save... they won't be asked for anymore.
    Jerry

  • Hard disc off line

    I did not need Aperture, but it looked interesting. Bought it, used it, it was nice.
    Having system issues, erased by HD and did a clean install, and back up from Time Machine.
    Renames my HD same as it came out of the box, no change there.
    Everything worked great - except Aperture
    I have blank screens with nothing but dotted outlines where pictures should be.
    I can do a select all, the under the file menu, select to reconnect
    The next screen that shows up, lists my HD, but says it is Off-line with 1347 pictures.
    And no way to verify or mount it.
    I assure you my HD is On-line but no way to get Aperture to acknowlege that.
    About ready to go back to iPhoto, that is still working great.

    Hi,
    Two things:
    1) in File>Locate referenced files… make sure you click the Show Reconnect Options button. This will give you a normal file browser with all drives listed.
    2) Click Show Only Files Not Found .
    Select the HD, locate one of the "missing" files and click Reconnect All. This should have you back up and running.

  • Removal of the Media is Off Line slide

    How do I remove the red slide that says "Media is off line." It is showing up at the beginning of my project and I have tried everything I know of to remove it. I have tried cutting it, removing the slides in front of it, etc. Please help as I do not want that to be at the beginning of my video. Thank you.
    Glenn Bailey

    Glenn Bailey
    What version of Premiere Elements are you using and on what computer operating system is it running?
    The Media Offline display typically indicates that the original file has been disconnected from the project. When you import media into a project, all you get are copies of the originals. And, those copies need to trace back to the originals at the hard drive save location where they were when they were first imported into the project.
    When you open the project, do you get a "Where is the file.....?" message related to this file that is supposed to be at the beginning of the project's Timeline?
    What is the name of the file for which it is asking - the missing file name should be at the top of the message?
    Let us say that you click Skip All to the "Where is the file....?" messages and find yourself in the opened project with your colorful Media Offline slide.
    Are you saying that
    a. you cannot right click it on the Timeline and select delete to delete it?
    b. if you go to the project media area, can you right click its thumbnail there and select delete...that should delete it from the project media area
    as well as from the Timeline?
    Let us stop here so that we can get in sync on the basic details of your situation and then we can better decide what next.
    Thank you.
    ATR

  • I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.

    I can't print wirelessly using Airport Express.  I have my HP printer connected to a USB hub, and the hub to the Airport Express, but when I select the HP from the printer list, my MacBook says the printer is "off-line" - even when it is not.  I've tried several USB connectors, and several different ports on my USB hub; same result.  I need to have the HP connected to the hub 'cause from there it's connected to our desktop Mac.

    Hi,
    I am currently replying to this as it shows in the iChat Community.
    I have asked the Hosts to move it to Snow Leopard  (you should not lose contact with it through any email links you get)
    I also don't do Wirelss printing so I can't actaully help either.
    10:01 PM      Friday; July 29, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • HP Officejet Pro 850 showing off line when it is turned on and plugged in.

    Ungh, it has been weeks now and this printer has just stopped working and is showing OFFLINE.  It was plugged into the back of the computer all year and worked fine and it just stopped printing so we plugged it into the USB port at the front of the computer and it worked for a while and now no matter where we plug it in, we can see it there in the devices and printers but it is greyed out.  You can make it default no problem but it just will not print.  We have downloaded the driver off the site over and over, uinstalled it over and over, when you select a document to print you can send the print to the printer, you can see it listed there but it just does not print.  I just went to the HP site and downloaded some kind of printing wizard assisstant or something and it sent a test page to the printer and it worked but this computer for whatever reason it gives me the message every time we try and print "Printer off line" Anyone have any suggestions?  Very frustrating. Thanks! Mike

    Hi Mike-lake,You may find this document helpful.  It covers a number of situations with the printer showing "offline" and walks through fixing this.  http://support.hp.com/us-en/product/HP-Officejet-2620-All-in-One-Printer-series/5357283/model/5385219/document/c04249080Please let me know if this corrects the issue for you!Jean

  • I seem to have multiple problems related or unrelated.  I cannot use Apple Mail for blueyonder and mostly for gmail as both show that the server is off line.  My pop up blocker doesn't work and I am blitzed with pop up windows on nearly every command

    Firstly I am unable to use Apple mail except for hotmail, for blueyonder, gmail or Sky as the server shows as (off line) and I have no idea how to get them on line even though I tell them to go there. 
    My pop up blocker doesn't work and I am blitzed with advertising windows virtually on ever command I make, one seems to be impossible to unsubscribe from. 
    When I am in an email with a web link the web link doesn't work and I get a window saying that I must have a pop up blocker, but if I switch it off it is no different, what does work is switching the "enable Java script off", then when I get to the web site I can't use it until I switch the java script back on.
    I can't do a screen shot either full or partial, when I try it changes the web site that is on screen to another.
    So what have I done that might have caused problems, downloading Yosemite seemed to be the start of the problems.  Since then I have started to install Mackeeper, after checking with a family members who should know, that MacPaw is safe.  I decided that I didn't want to pay the subscription, so went through the uninstall instructions but it comes up as a pop up with considerable regularity.
    My stress levels have gone through the roof with pop ups happening so regularly and not being able to use Apple mail.o can anyone help please?
    S

    Mail troubleshooting - Yosemite
    Troubleshooting sending and receiving email messages
    Troubleshooting sending email messages
    SMTP servers keep going offline

  • How to download and install Flash Player off line?

    I prefer to install SW off line.
    Can I, and if so how do that with Flash Player.
    I use both browsers, IE & Firefox (on Win 2000). Do I
    need to do separate installations?
    The above goes for Shockwave too.
    Thanks,
    David

    Try to download and run the appropriate offline installer from http://helpx.adobe.com/flash-player/kb/installation-problems-flash-player-windows.html#ins tall_in_a_firewall_proxy_server_environment
    [topic moved to Flash Player forum]

  • How do I copy home sharing content to my iPad so it is available off-line

    My iPad is not synchronised with my Mac, I use iCloud. How do I transfer an album from iTunes on my Mac that is shared using home sharing to my iPad so that it is also available when I am off line? (similar to synching when plugging the iPad into iTunes on the Mac and selecting the album for synching)

    It's just not possible. A project can only be worked on in the library that contains it.

Maybe you are looking for