Off-Road Mapping Software with offline maps - eg U...

Apologies if already posted -couldn't find it.
I need mapping software for the Nokia 710 Windows 7 that will show pre-downloaded maps (avoiding problems with no signal and data connection costs), preferably UK Ordnance Survey 1:50000 or similar. It would be neat if it could save waypoints for uploading and sharing. I see many such apps for Android and iPhone, but not for Windows. Nokia Maps currently fails on most counts. Can anyone point me in the right direction, please? Thanks.

Rudeword wrote:
I've found "Outdoor Navigation" by GPS Tuner. Looks OK but don't know about OS yet. Any comments?
Good find, this application is £3.99 in windows Marketplace and you can try before you buy!
Happy to have helped forum with a Support Ratio = 42.5

Similar Messages

Europe Road Maps

I don't suppose there are any eBooks that are good quality road maps of European countries like those provided by Michelin. Because most of my iPad use will be off line (in the car) I cannot rely on maps requiring an Internet connection. I have a 3G iPad pre-ordered so can't browse the Apple bookstore myself. Would be a cool use, if available.

Hi Bill,
Yes, that's my intended approach. This year will be the first time I try it.
Sim's are easy to cut, at least with a decent pair of scissors. The risk is making sure you don't cut into the etched area. That's an issue of cutting in a straight line. If I mess up, I'll go back to the TIM shop and ask for another one. They may charge €5 for another one or may give me one on the house, depending on how much interest they have in the iPad. There's a margin of error around the etched area. I trimmed a sim years ago as it was a bit too big for my phone. It was a snap. Not the major trim a microsim requires but follow a line and it should be ok. For a template, I'll use the adaptor card, print out a few copies of the template and maybe pack a bit of 2-sided tape. Again, this will be a first time for me.
As with any wireless option, there are tons of prepaid plans. What we normally do for the phone is a €3/week plan that gives us unlimited calls in Italy and free incoming calls and sms (don't recall the cost per sms, minor). We sms out of the country and ask people to call us back. We're always with friends so being able to call within Italy is important for us. We usually do 3 or 4 countries so we get a country card for each one as the multi-country cards can get expensive.
We've never done data but every plan I've looked in a few European countries is €25 to €40 for a month. The TIM offer I know of charges €9 for a month, 100 hours data and €2/hour if I go over the 100 hour limit. To add a voice option to it is probably not much cost but I don't know. There are frequently no activation fees. If there are, they're not much, <€10. For me this is fine for email and a few needed web searches.
I also hope the MotionX gps is out by the time I leave in July. Its supposed to be out with the introduction of the 3G model.
I hope this will do it as it's about all I know at the moment. We are both in unchartered territory.

Solman Road Map Issue

Good Day,
I have created the new Roadmap using the RMDEF/RMAUTH and i want to use that Roadmap in one of my Projects in Solution Manager.I have selected the Same Roadmap in Scope of the Project in (Project Administration),But the Structure or Hierarchy which i Created in Roadmap is not showing in the Project.
Can someone help me with that or if you guys can tell me how to Upload the New Road map in Solman Correctly.
Thanks and waiting for a Positive Response.

Hi
If you are talking about creation of structure in solar01 then it has to be done in solar01 only via the Structure tab
If you press F4 and choose the Business Process Repository and you can select all the Business Scenario like Procure to Pay etc which are to be used in you project here
for non sap scenario directly edit or write it ant then save.
you can check below link
https://websmp103.sap-ag.de/~sapdownload/011000358700000478762009E/HowToCreateConfGuide.pdf
Hope it clarifies your doubt
Regards
Prakhar

What is the road map to start XI

HI Frnds,
Me previously worked on Datawarehousing.Datastage(ETL tool).Now I shifted to XI 4months back.In my company they given a warm up training on XI and some basic scenarios.Now they directly kept me at one interface(project).Ok Iam doing good there.
But what my question is ,what is the actual road map to start the XI like from SLD or Adapter or from Mapping what is the step-by-step learning and what are the essential things I have to know as a SAP XI consultant. And am I want to learn SAP functional to stay at SAP for long run.
So what are the things I have to learn and what are the essentials to be need to stay in SAP XI space for long run?

hi,
<i>But what my question is ,what is the actual road map to start the XI like from SLD or Adapter or from Mapping what is the step-by-step learning and what are the essential things I have to know as a SAP XI consultant</i>
You need to know all of these to become an XI consultatnt in a true sense.
If you ask me , the best way would be to begin by understanding XI architecutre, and then moving on to simple FILE to File scenarios, and then a few complicated ones. After getting a grasp of how XI works, maybe you can visit SLD concepts and understand internally what is happening in XI.
Meanwhile,Following are the links to weblogs which will help to develop the basic scenarios.
/people/prateek.shah/blog/2005/06/08/introduction-to-idoc-xi-file-scenario-and-complete-walk-through-for-starters - IDoc to File
/people/ravikumar.allampallam/blog/2005/03/14/abap-proxies-in-xiclient-proxy - ABAP Proxy to File
/people/sap.user72/blog/2005/06/01/file-to-jdbc-adapter-using-sap-xi-30 - File to JDBC
/people/prateek.shah/blog/2005/06/14/file-to-r3-via-abap-proxy - File to ABAP Proxy
/people/venkat.donela/blog/2005/03/02/introduction-to-simplefile-xi-filescenario-and-complete-walk-through-for-starterspart1 - File to File Part 1
/people/venkat.donela/blog/2005/03/03/introduction-to-simple-file-xi-filescenario-and-complete-walk-through-for-starterspart2 - File to File Part 2
/people/ravikumar.allampallam/blog/2005/06/24/convert-any-flat-file-to-any-idoc-java-mapping - Any flat file to any Idoc
/people/arpit.seth/blog/2005/06/27/rfc-scenario-using-bpm--starter-kit - File to RFC
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1685 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - File to Mail
/people/jayakrishnan.nair/blog/2005/06/20/dynamic-file-name-using-xi-30-sp12-part--i - Dynamic File Name Part 1
/people/jayakrishnan.nair/blog/2005/06/28/dynamic-file-namexslt-mapping-with-java-enhancement-using-xi-30-sp12-part-ii - Dynamic File Name Part 2
/people/michal.krawczyk2/blog/2005/03/07/mail-adapter-xi--how-to-implement-dynamic-mail-address - Dynamic Mail Address
/people/siva.maranani/blog/2005/05/25/understanding-message-flow-in-xi - Message Flow in XI
/people/krishna.moorthyp/blog/2005/06/09/walkthrough-with-bpm - Walk through BPM
/people/siva.maranani/blog/2005/05/22/schedule-your-bpm - Schedule BPM
/people/sriram.vasudevan3/blog/2005/01/11/demonstrating-use-of-synchronous-asynchronous-bridge-to-integrate-synchronous-and-asynchronous-systems-using-ccbpm-in-sap-xi - Use of Synch - Asynch bridge in ccBPM
https://www.sdn.sap.com/irj/sdn/weblogs?blog=/pub/wlg/1403 [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] [original link is broken] - Use of Synch - Asynch bridge in ccBPM
/people/michal.krawczyk2/blog/2005/08/22/xi-maintain-rfc-destinations-centrally - Maintain RFC destination centrally
/people/sravya.talanki2/blog/2005/08/18/triggering-e-mails-to-shared-folders-of-sap-is-u - Triggering Email from folder
/people/sravya.talanki2/blog/2005/08/17/outbound-idocs--work-around-using-party - Handling different partners for IDoc
/people/siva.maranani/blog/2005/08/27/modeling-integration-scenario146s-in-xi - Modeling Integration Scenario in XI
/people/michal.krawczyk2/blog/2005/08/25/xi-sending-a-message-without-the-use-of-an-adapter-not-possible - Testing of integration process
/people/michal.krawczyk2/blog/2005/05/25/xi-how-to-add-authorizations-to-repository-objects - Authorization in XI
http://help.sap.com/saphelp_nw04/helpdata/en/58/d22940cbf2195de10000000a1550b0/content.htm - Authorization in XI
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step - Alert Configuration
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide - Trouble shoot alert config
/people/sameer.shadab/blog/2005/09/21/executing-unix-shell-script-using-operating-system-command-in-xi - Call UNIX Shell Script
/people/sravya.talanki2/blog/2005/11/02/overview-of-transition-from-dev-to-qa-in-xi - Transport in XI
/people/r.eijpe/blog/2005/11/04/using-abap-xslt-extensions-for-xi-mapping - Using ABAP XSLT Extensions for XI Mapping
/people/prasad.ulagappan2/blog/2005/06/07/mail-adapter-scenarios-150-sap-exchange-infrastructure - Mail Adaptor options
/people/pooja.pandey/blog/2005/07/27/idocs-multiple-types-collection-in-bpm - Collection of IDoc to Single File
/people/sap.user72/blog/2005/11/17/xi-controlling-access-to-sensitive-interfaces - Controlling access to Sensitive Interfaces
/people/michal.krawczyk2/blog/2005/11/10/xi-the-same-filename-from-a-sender-to-a-receiver-file-adapter--sp14 - The same filename from a sender to a receiver file adapter - SP14
/people/prasad.illapani/blog/2005/11/14/payload-based-message-search-in-xi30-using-trex-engine - Payload Based Message Search in XI30 using Trex Engine
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i - XI : Configuring CCMS Monitoring for XI- Part I
/people/michal.krawczyk2/blog/2005/11/23/xi-html-e-mails-from-the-receiver-mail-adapter - XI: HTML e-mails from the receiver mail adapter
/people/sap.user72/blog/2005/11/22/xi-faqs-provided-by-sap-updated - XI : FAQ's Provided by SAP
Regards,
Bhavesh

ESOA Road map

our's is a chemical/oil company. it's business process IT landscape runs on SAP 60 Percent and other 40 percent on .net, j2ee and other web applications. we have made siginificant amount of investments in their non-sap IT infrastructure like
their present day-to day HR day to day activities ,ESS and MSS runs on .net applications.
As part of their streamlining current IT investment our company is preparing a roadmap to adapt ESOA.
First we have set a road map to upgrade to ECC 6.0 so that we can enjoy the fruits of ESOA and NetWeaver
next we are thinking to go for Enterprise portal EP 7.0 so that we can integrate our HR process into that
rather having them on .net applications and maintain single application.
As a part of our next part in the road map we are trying to implement PI 7.0/PI 7.1 to remove our
dependency on many Interfaces.
As a Part of our road map we are trying to go for MDM implementation where in we have duplicate data
in many legacy systems and sap, so that we can have central master data repository.
I am unable to understand from the above road map where we discuss ESOA road map, but all the solutions are netWeaver
Technologies and why does ESOA come into picture(ESOA stategy Road map ) . next thing in times of this global recession how our company can synergise with new technolgies and cope
up with ripping plugging and removing the current investment and infuse new investment with other user licenses which is big burden.
We are going to acquire some over seas acquistions How ESOA can help us in integrating the acquired company IT landscape into our existing IT landscape?.
How SAP ESOA can address the problems of Economic Recession and downtrun in companies
through efficient IT management and setting effective roadmap for IT infrastructure and through ESOA strategy roadmap ?
Don't give any links please i have read a lot.

Hi
pls refer the link
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/403ada50-6213-2b10-a4b1-96635f43dee9
it wud b useful

Animating a road map of our trip using CS5

I would really appreciate help on this subject. I have a road map and want to show an animated line of the roads we travelled. I have tried using PS, where I opened the map, created a new layer, drew in the first part of our trip in red, saved that as a jpg file. Created a second new layer, then using a wider brush, in black, and using the FADE option, carefully traced over the red line, at the end of which the wider black line had faded to white. I then deleted the map and the red line layers,and saved the faded line only as a bmp file.
Next I placed the map, then the red lined map side by side onto the timeline of my video in Premiere Pro. I then used the gradient wipe effect to place between these two maps, opened the bmp file, as instructed, then stretched the left and right end of the transition to cover the 2 jpg maps on the timeline. So far I have tried a combination of all of this about 500 times and am about to give up. I can get an animation of sorts, but nothing like the moving snake like line that I want. Also, I have read Mr Hunt's advice, and may resort to placing a PSD Layer over a map, however, I have seen how the moving route line works and it is most effective but almost impossible for me to achieve. I am looking foreward to your views. Thank you.

I promise you that this is best done in After Effects using the pen tool to draw a path along the road. Everything you need comes standard in AE... no plugins.
http://www.monologue.gr/tutorials/an-animated-arrow-tutorial-to-rule-them-all/
^^^ This tutorial is so easy to follow, anyone can do it in just minutes. You can skip the arrowhead bit and just make the line follow the road, and it's even easier. I take this technique a step further and color the line/arrowhead with keystrokes so that I can animate arrows showing airflow through equipment that change color from red to blue and back to red, indicating the temperature of the air as it moves through the system.
After Effects can be an intimidating program, but give it a shot. You'll love the result.

Road map for HRMS consultant for new oracle guy, please help

road map for Oracle HRMS consultant for new oracle guy, please help

Hi,
If you go through the Oracle sites you will come to know that HRMS Suite has various modules like Core HR, SSHR, Performance Management, Learning Management, iRecruitment, Compensation workbench, Absence Management, Payroll, Advanced Benefits etc.
You will have to start with understanding the Core HR concepts which is the base of the entire HRMS suite where you define the core structures like Organizations, Job, Position, Grade, Costing, Hierarchies, Employee data etc and which forms the base of the other modules.
Post you are done with Core HR you can start understanding the Self Service functionality and Approval Management Engine.
If you are clear with these two modules, then you can pick any other module as per your Job requirement demands.
You can do this all if you have an instance to access where you can do hands-on. In absence of which learning will be not be easy. On apps2fusion site which I have already mentioned you can view the training calendar and check for any relevant courses if you want to under go training as the quality of training is very good.
Training is not a mandate and you can learn it without training also if you have the dedication and time by understand each and every action which you are performing in application and the impact of it.
Hope it helps.
Thanks,
Sanjay

[Zen Micro] Road map for firmware 1.x / end of life

Hi all,
does anyone (hint, hint, moderators) know what's the supposed road map for the Micro firmwares. Ok, I know that Creative doesn't comment on the functionalities and releases .
But my essential question is this:
<FONT color=#cc0000>Is the firmware .x (driver-based, with MediaSource support) end of life, or will it continue to be developed? Will all new, generic features of the 2.x (PlayForSure...) line also be integrated in a continuing .x line of firmware? Or not?
I found out in <A target=_blank href="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=9892">this thread about firmware 2.x[/url] that the new 2.x beta firmware has new features, not being promoted on the download site (or forum). For the moment, I prefer MediaSource over WMP to manage my collection, and for that reason I want to stick with .x firmware.
<A target=_blank href="http://forums.creative.com/creativelabs/board/message?board.id=dap&message.id=9892">[/url]I really expect a customer-oriented company (and I recently filled in a Creative survey on quality of support services after getting an invitation email, so they do suggest they care) to share a roadmap - even for just some months - with their users.
Thanks.

Creative very rarely share this kind of information, so I think it unlikely they will.

Difference between ROAD MAP and FPM Technic

Hi,
I need to develop a web dynpro java application using floor plan manager technique. It should be integrated in the ESS.
Please let me know if i develop the same application in webdynpro abap using ROAD MAP control whether it will integrate in ESS or not.
In case If it sinks let me know what are the functionalities that differ.
Thanks,
Hasini.

Road map technique and Floor Plan Manager Technique, both are different.
The FloorPlan Manager is a tool for constructing WD applications with a similar layout and user interface.
The OIF and the Guided Activity Floorplan (GAF) are the types of FPM.
Editing of a single business object is done by OIF and allows the nesting of header and item details. The GAF, uses a road map technique for the step by step activity to be performed.
The FloorPlan Manager is very powerful because it can be configured using component and application configuration - allowing you to plug in different UI Building Blocks (UIBB) as Web Dynpro Components or Views. The robust nature of the FPM is becasue of the Consistency between applications provided by it.
The Road Map is a UI element in WD used to create your own custom applications.
Pls refer to this link to have more idea -
https://wiki.sdn.sap.com/wiki/display/Community/BringitallTogetherwithFPM%28FloorplanManager%29forWebDynpro+ABAP
Reward if helpful.
Best Wishes,
Chandralekha

How to enable Previous Step Button in First Substep of FPM Road Map

Hello All,
I have created three MainSteps M1 M2 M3.
In Main Step M2 having Substeps Say S1 S2 S3 S4.
In M2 of S1 Previous Button by default it is disabled. Means user can't go back from First Substep(S1) to Main Step2 (M2).
Please let me know how to enable "Previous Step" Button in First Substep (S1) of FPM Road Map in M2.
Thanks in Advance.
Br
-CW

Hello BS,
Thanks for your suggestions.
Yes we can do with custom button.
Is there anyway to enable standard Previous Step Button in First Substep instead of creating cutom button.
Please guide me if any other options.
BR
-CW

Road Map Step Label Changes Issue

Hi Gurus,
I am working for ESS business package. I have changes FPM application to read Edit as "Display" for Road map step. I have tested it and transported it to test system.
The changes were working fine till yesterday; today when i tries to test the application the road map step is reverted back to read as Edit not Display. I do not find any one changed the FPM application.
what would be the reason.
my observations are like; I had some changes in some component and deployed it and have transported NWDI transports to Test system. i suspect this transports have changed the FPM application.
Please suggest me on this issue,.
Points will be awarded..
Thanks
Srikanth

Hi Srikanth,
the short answer
You modified the FPM application from within the portal, using the Self-Service Administrator portal role, right? The point is that this content is also contained in the SAP_ESS SC in NWDI. It's contained in all those cfg DCs you see. They basically contain a (zip)archive that contains other (zip)archives that contain different XML files that eventually describe the FPM application. So what happened is that you modified the FPM application at runtime, but your changes were overwritten when the cfg DC was deployed afterwards.
the details... and the questions...
Concerning those cfg DCs. They're a very specific type of DC. The type is "Enterprise Portal" and the subtype is "Portal Content". In NWDS, this is described in the following XML file: C:\Program Files\SAP\IDE\IDE70\eclipse\plugins\com.sap.ide.eclipse.component.provider_2.0.0\componentTypes.xml When I was using NWDS 7.0 SP12, this particular type of DC was not visible (if I remember it correctly), i.e. I could not create a new DC of this type. NWDS SP12 also didn't contain the necessary plugin, com.sap.portal.pcd.ide.eclipse.nwdi.ui.NewPortalContentWizard, as described in the same XML file (or at least I couldn't find it). Since I installed NWDS SP14, the plugin is present and I can create this type of DC myself. But that doesn't help me that much, since the wizard just creates some empty DC and I don't have a clue how to populate it with the content of the FPM application. Unfortunately I also don't have a clue about how to modify the existing cfg DCs in SAP_ESS.
BTW, the change you made, a small textual change, is relatively easy to do: unzip the archive(s) in the cfg DC, modify the text in one of the XML files (for some reason the translation of the roadmap steps are present 4 times, if my memory doesn't fail on me) and zip everything again. This works fine for me.
the $1 million question...
Obviously, what I really like to know: how to modify the FPM applications on the portal using the Self-Service Administrator role (that's easy) and export it to a suitable archive that can be imported in the (SAP_ESS) cfg DCs? As long as this is not possible, meaning I don't have a clue how to do it, I'm forced to deploy the modified FPM applications, which I exported as an epa file, after each NWDI transport. And this is not very practical...
I hope my (probably a bit too complex) explanation makes any sense.
If someone else knows more about this subject or how to deal with it, please let us know. tnx!
Kind regards,
/Sigiswald
Edited by: Sigiswald MADOU on May 23, 2008 2:30 AM
I posted the same question in the NWDI forum: (ESS) FPM applications, cfg DCs & Enterprise Portal / Portal Content DC

FPM road map step name translation

Hi everyone,
I have an FPM application with some steps, and I'd like to translate the name of the step.
I opened the FPM Application in the Portal's Self-Service Administration, I can see the Road Map Definition, but I don't know how can 'I translate the Description field.
Please help.
The solution is here:
/people/soledad.alvaradoganzhorn/blog/2004/09/13/8-short-steps-2-tools-translated-traducido-traduit-uumlbersetzt
Thanks
N.
Edited by: ngastanek on Mar 21, 2011 4:28 PM

THe solution is here:
/people/soledad.alvaradoganzhorn/blog/2004/09/13/8-short-steps-2-tools-translated-traducido-traduit-uumlbersetzt

Dialog boxes: Road Map navigation buttons into the standard button area

Hi All,
I have a Road Map form which is opened in a dialog box being displayed in a portal. Is there a way to get the "next/previous" buttons to display in the wave line area of the dialog box?
I know that i can put standard Yes, No and Cancel buttons in there, but how about custom user defined buttons?
Cheers,
Vic

Hi,
When you use these popups you can have only the standard buttons not the custom ones.
To have the custom ones, then you need to create a view and have the layout with your own buttons then
embed this view in other window inaddition to the existing window.
I mean have to views one in each window.
Call the 2nd window in 1st window as a popup. So that you can have you own buttons in that view that is embeded in 2nd window.
This way you can do.
Regards,
Lekha.

Disabling the Sub Road map steps in web dynpro abap

Hello Experts,
I am using Floor Plan Manager for Road map(FPM_GAF_COMPONENT).
I have 5 main road map steps of which the second one has 3 ( 2.1, 2.2 , 2.3 ) sub road map steps.
I have a requirement of enabling only the sub road map step in which we are presently in.
The other sub road map steps should be disabled.
Like if i am in 2.2 then 2.1 and 2.3 should be disabled.
I have solved this issue for main road map steps but unable to find a way for doing the same with Sub Road map steps.
Please help me out in this.
Thanks in Advance,
Shravan Varma

Substeps are not shown automatically, they are to be enabled at runtime .
See in page 35/36 adding/activating substep
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/e0d500f5-5205-2e10-43a6-dd023a5d0818?QuickLink=index&overridelayout=true

Discoverer Road Map

I am currently evaluating oracle BI products for my company.
Having looked at BI Beans and Discoverer it seems that they use different metadata definitions (MDD). BIB use Oracle OLAP who's MDD is defined using OEM (v1) or the CWM2_ packages (v2) whereas Discoverer uses its Administrator client tool to define its MDD the End User Layer.
So, as things stand, it looks as though two MDDs are required. Is this correct? If so, what is the road map going forward? In particular, will the technologies converge? at least as far as MDDs are concerned.
Thanks in advance for your intput.

The upcoming release of Discoverer, which will be available with Oracle Application Server 10.1.2 will support query and analysis on relational data and OLAP data.
When you create the multidimensional structures in Oracle OLAP, you use the OLAP Catalog. All tools and applications use this, including Discoverer. Discoverer does not require any extra work to utilize the Oracle OLAP option.
As always, Discoverer allows you to create a business meta-layer to protect end users from the complexity of the database. This is the End User Layer, and is used for Relational data.
Discoverer Plus (to create queries, analyze, drill down, format, etc) and Discoverer Viewer (analyze, drill down, format) can both drill down, and will support drill to detail, including drill from OLAP to Relational.
The 10.1.2 version will also have powerful customization functionality through Portal, which means one worksheet can satisfy many many users. For example... three people authenticate to Portal and all see the same Discoverer portlet. One of them changes the graph to a pie, the second drills on something to another level and the third person changes the layout and add some conditional formating. Each saves their changes back to the Portal. The next time each logs in, they see their own changed version of the portlet, not the original.

Off-Road Mapping Software with offline maps - eg U...

Similar Messages

Maybe you are looking for