(off topic) BEWARE OF CNET DOWNLOADS!!!!

I know that this is slighly off-topic for this forum, but I wanted to spread the word about CNET downloads (download.com). Several months ago, CNET was slapped on the wrist for intentionally adding spyware into the programs on their download website.
Well, they stopped for a while and they're at it again. I wrote to them saying that I had trusted CNET for years because of their policy against spyware and mailicious code. A few weeks ago, I needed to download a program to check wifi channels on my wireless network, and ended up having to perform a full virus/spyware scan aftrer downloading TWO different programs from CNET's download site. After installing each program, I ended up having my homepage hijacked and dozens of popups appearing offering to fix my computer!
I thought that maybe it was just the first program (slipped by heir radar), but the SECOND one had the same problem. I then went to the publisher's website and found his blog complaining that his program was free of malicious code and that it was inserted by CNET/Download.com AFTER he had uploaded it to the web.
His recommendation is that, if you can't go directly to the publisher's site for a download, File-Hippo is still a fairly clean site.
Please pass this info on to friends and colleagues.
SD
All people have photographic memories - some are just missing the film!

Sophiesdad, welcome to the forum.
I know that you are correct. I have found this to be very true. The only way that I have found to get around this situation is use the "Custom" option to do the install. This allows me to decline all of the garbage that they want to add to my computer. It has worked so far.
This is not the only website that does this, however. I have found it to be true on Softpedia, also. It was my most trusted until lately.
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

Similar Messages

Request to have off-topic posts moved

There are a number of posts accumulated in the Server and Storage Systems group of forums that are just not on-topic for them.
Generally they've been posted by people that care to not read anything nor drill down to an appropriate forum and just dump a question.
I've done the "report abuse" routine on a number of them but that seems to have been ignored.
Thus this new post.
These are from the last 60 days:
(need to be moved to a Glassfish forum)
How to start Galssfish when computer start
Glassfish 3.0.1 updatetool
http://forums.oracle.com/forums/thread.jspa?threadID=2128052
war for modify domain.xml in glassfish 3
Glassfish 2.1 + JPA 2: need some Sun/Oracle expert advice
(topics for Sun Java System "whatever" applications, posted to server forums)
AMPostAuthProcessInterface redirect problem
http://forums.oracle.com/forums/thread.jspa?threadID=2127174
Weblogic Spring/Sample Application Help
Cannot add new LDAP Group Members in Sun Java Server 7.0
http://forums.oracle.com/forums/thread.jspa?threadID=2134347
Help with iPlanet
iText vs Jasper Java Application Source Code
OpenMQ Unack'ed messages causing Java Heap overflow in STOMP
(database product questions posted to System Administration and hardware forums)
how can i release lock record?
Oracle for Mac
Problem using TNS_ADMIN in registry (Ora. 11g R2 Instant client in Win. 7)
http://forums.oracle.com/forums/thread.jspa?threadID=2154755
/opt/SUNWwbsvr7/bin/wadm exited with error: 125
Performance Testing tool
ORA-00202 and Fractured block found during control file header read
Performance Monitoring
Reg : Weblogic Server Installation
how can export from 11g to 9i
What's wrong with oracle database11g? Is it a serious problem?
Client download link needed
http://forums.oracle.com/forums/thread.jspa?threadID=2149037
Oracle 10G on VMware Redhat Linux
http://forums.oracle.com/forums/thread.jspa?threadID=2138098
I Can't Connect to Oracle
what is the function of autoextensible field in dba_data_files?
http://forums.oracle.com/forums/thread.jspa?threadID=2139323
databse copy
Advice needed regarding Database design practice
enterprise manager
http://forums.oracle.com/forums/thread.jspa?threadID=2128320
Problem with granting privileges
Inatalling IDM 11g on WondowsXp machine
Any good resources for info on specifications for a new 11g install?
During installation EMCA trows an error: Error uploading configuration data
I received Validation error in the Backup Setting
RMAN RESTORE
Find the user(s) using more CPU in a database
Oracle 10g 64-bit database on Windows 2008 R2 (64-bit) error ?
http://forums.oracle.com/forums/thread.jspa?threadID=1554073
Temporary tablespace not cleared
TNS -12541 TNS: no listener
Installing Oracle 11g on a server without network access
RMAN Shows the following error... Please any one can help me....
http://forums.oracle.com/forums/thread.jspa?threadID=2137784
java.lang.Exception
http://forums.oracle.com/forums/thread.jspa?threadID=2138186
ORA-12543 When creating a new oracle instance, Oracle 11g
Problem with Uninstalling Oracle 11.2 on Windows Server 2008
problem installing mod_plsql oracle 11g linux
Best practice for install oracle 11g r2 on Windows Server 2008 r2
ORA-12535: TNS:operation timed out
http://forums.oracle.com/forums/thread.jspa?threadID=1982259
move datafile/tablespace in a partitioned table
Orace 11g CRS installation ( windows server 2008 64 bit ) Error
Datapump import from a map drive
http://forums.oracle.com/forums/thread.jspa?threadID=1982528
http://forums.oracle.com/forums/thread.jspa?threadID=2126409
http://forums.oracle.com/forums/thread.jspa?threadID=2126802
Oracle Startup/Shutdown with SQLPLUS and ORADIM in Windows...
http://forums.oracle.com/forums/thread.jspa?threadID=1574872
http://forums.oracle.com/forums/thread.jspa?threadID=2123572
http://forums.oracle.com/forums/thread.jspa?threadID=2041227
http://forums.oracle.com/forums/thread.jspa?threadID=2077085
http://forums.oracle.com/forums/thread.jspa?threadID=2069660

If these last few are pruned out of the SysAdmin forums, that should finish the housekeeping task. They're the most recent entries of off-topic questions.
database postings to the SysAdmin forums
Backup database with RMAN
sql*NAT?
How can convert Oracle 10g trial to License
http://forums.oracle.com/forums/thread.jspa?threadID=2160796
Visual Web Developer 2010 Express and Oracle ODAC - Oracle data provider
http://forums.oracle.com/forums/thread.jspa?threadID=2160572
Huge amount of "db file sequential reads" while INSERT APPEND operation
http://forums.oracle.com/forums/thread.jspa?threadID=2160410
Oracle Universal Installer - Toad - Virtual Machine Windows 7 on Mac
What to check or can say from where to start?
Where and how does oracle store tables?
Oracle net configuration assitant failing while installing Oracle 11g.
Resolving Mview Complete Refresh Performance
Problem with silent install of 11gR1 on Windows 2008
http://forums.oracle.com/forums/thread.jspa?threadID=2157067
ORA-01991: invalid password file
Sequences incorrect after exporting and importing a scheme
http://forums.oracle.com/forums/thread.jspa?threadID=2153592
http://forums.oracle.com/forums/thread.jspa?threadID=2149027
http://forums.oracle.com/forums/thread.jspa?threadID=2128320
http://forums.oracle.com/forums/thread.jspa?threadID=2137784
http://forums.oracle.com/forums/thread.jspa?threadID=1982259
http://forums.oracle.com/forums/thread.jspa?threadID=1574872
http://forums.oracle.com/forums/thread.jspa?threadID=2123572
http://forums.oracle.com/forums/thread.jspa?threadID=2041227
http://forums.oracle.com/forums/thread.jspa?threadID=2077085
http://forums.oracle.com/forums/thread.jspa?threadID=2069660
http://forums.oracle.com/forums/thread.jspa?threadID=2113069
http://forums.oracle.com/forums/thread.jspa?threadID=1981627
http://forums.oracle.com/forums/thread.jspa?threadID=1981082
http://forums.oracle.com/forums/thread.jspa?threadID=1981287
http://forums.oracle.com/forums/thread.jspa?threadID=1979404
http://forums.oracle.com/forums/thread.jspa?threadID=1955376
http://forums.oracle.com/forums/thread.jspa?threadID=1844213
http://forums.oracle.com/forums/thread.jspa?threadID=1773975
http://forums.oracle.com/forums/thread.jspa?threadID=1773059
http://forums.oracle.com/forums/thread.jspa?threadID=1555844
http://forums.oracle.com/forums/thread.jspa?threadID=1555363
http://forums.oracle.com/forums/thread.jspa?threadID=1554035
http://forums.oracle.com/forums/thread.jspa?threadID=1518192
http://forums.oracle.com/forums/thread.jspa?threadID=1272113
http://forums.oracle.com/forums/thread.jspa?threadID=1134136
http://forums.oracle.com/forums/thread.jspa?threadID=1938192
Again, the community moderators don't have permissions to do that.
Thanks

Camera Settings and Printing -off topic

Hi Everyone;
My teenage cousin is going on a trip to Europe for a few weeks and she will be taking alot of digital pictures with her Canon point & shoot camera ( 5 MP SD30), but will not be able to unload her images from the SD card. She already has Three Cards totaling 1.5 GBs and does not want to buy more.
So in order to increase the number images the card will hold, do you recommend lowering the resolution OR lowering the image quality by increasing the JPEG compression in the camera settings, for the purposes of printing ? ( obviously not all her images, but she may want to have some for her school yearbook, friends etc ).
This is a question I have asked myself with my own digital cameras, over the years, if i have to shoot JPEG i usually have the settings to MAX resolution and Lowest compression, in case i want to print some.
Also what would you recommend as the lowest resolution setting (in general, with any camera) if you want to print the following sizes?
4 X 6
5 X 7
8 X 10 or US Letter
Thanks in advance, and i realize this is a little off topic.
Robert
Powermac G5 Dual 2.7Ghz, 4GB, X800, WD "Raptor" 74 GB 10K boot, 3.5 TB FW 800 Mac OS X (10.4.5) My first Computer was an Apple IIc !!

You could purchase an iPod along with the iPod Photo Connector to download the images for storage.
http://store.apple.com/1-800-MY-APPLE/WebObjects/AppleStore.woa/70203/wo/oG40TPj AzNzm2xaoa3A25wLSBVg/2.SLID?mco=55EFC253&nplm=M9861G%2FA
Epson also makes two such a devices.
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=49164278
http://www.epson.com/cgi-bin/Store/consumer/consDetail.jsp?BV_UseBVCookie=yes&oi d=61555441
PowerMac G5 Quad 2.5Ghz Mac OS X (10.4.5) 4.5GB RAM, Nvidia 7800 GT, 600GB RAID

Off Topic: Change File Attributes (date)

Hi All,
Sorry this is off topic but I need a quick fix. I need to
change the date stamp on a set of files within a directory. Anyone
know a quick trick? Just need to mark all files with today's date.
We are restricted on freeware and shareware on site, so would
rather do this without downloading third party software.
thanks
Craig

Yeah I could do with a fix too, it's that sort of a day!
You are old enough and ugly enough to remember DOS. I think
you could change it there. In Windows I think you are restricted to
using third party software. I have a good programme. Want to drop
by here lunchtime with all the files on a memory stick?

Audio production education (way off topic)

Hi all, sorry for the off-topic Q but I'm thinking about "formalizing" my audio production learning. Has anyone had any experience, good or bad, with Berklee's online courses? It's pro tools heavy, but what one learns in one DAW can be ported to another I imagine.
Thanks much!

I've taken several online courses with Berklee, and found them to be very good. The only issue you really want to be clear about, is that you have necessary prior knowledge to take the class. The Pre-requisites.
You must already be computer savy. You may need to have a certain background knowledge too. For instance, I was taking an arranging class, and we had to upload homework every 2 days. They recommended using Finale. It might take me 2 hours to do the assignment, but then it took me another 5 to figure out how to use finale, to get the assignment to look right. I ended up using Logic's scoring, which was fine, but the benefit of using Finale would have been, all the other students could have downloaded my assignment, and played in in Finale, and heard it exactly as I did it..
Each subject you take might have a different pre-requisite knowledge.. Some classes really don't much of anything.. Some classes use textbooks, or require CD's, others suggest where you can find free materials to assist with. Most classes you need to do some kind of homework, and upload. Some students had trouble with that and dropped out..
I would say that Berklee online is an excellent experience... It is EXPENSIVE though. The only fault I could point out is the above, prior knowledge that one might need to know to take a course. In my experience, the administration was a little too lax with that, in order to sell you a course.
I'm not sure about taking a pro-tools course, and hoping it will give you a lot of knowledge about using cu-base or Logic.. Yes a lot of concepts will 'port over' to another area.

VirtualBox - somewhat off-topic

I know this is somewhat off-topic, but I'm hoping there's some expertise here that will be a bit more helpful than when I asked this on the VirtualBox forums.
For a coupe of years now I've been running my own private test lab on my laptop, using VMworkstation. It's been working to my satisfaction, but with all the recommendations to use VirtualBox (after all, it's free) I thought I'd give it a try. This was a few months back, and I ran into a real problem with the way VB appears to handle networking vs. VMware.
With VMware, I set all my virtual machines to use NAT. This allows me to give the vm a fixed IP address, not reveal itself outside the host OS, and still reach the internet for things like yum updates. Obviousely, bridged network would allow me to access the inernet, but would make me have to play by the rules of whatever network I'm on -- my company or my home ISP. Host only would address that but not allow me to pull updates from the internet.
Now, with VirtualBox, I couldn't get NAT to work with a fixed IP address that I assigned to the vm. The guys at the VB forum couldn't seem to understand why that was an issue. They just kept saying to allow the vm to use a DHCP assigned address and 'everything just works'.
I don't have VB installed at the moment, so can't re-run tests, but thought I'd throw this out to see if it rings a bell with anyone, and if so if there might be a solution. I still tend to believe VB will do a fixed guest IP with NAT and I just wasn't seeing how to make it work, but perhaps not.
Comments?

Dude wrote:
In NAT mode, the guest network interface is assigned to the IPv4 range 10.0.x.0/24 by default where x corresponds to the instance of the NAT interface +2. So x is 2 when there is only one NAT instance active. In that case the guest is assigned to the address 10.0.2.15, the gateway is set to 10.0.2.2 and the name server can be found at 10.0.2.3.
If, for any reason, the NAT network needs to be changed, this can be achieved with the following command:
VBoxManage modifyvm "VM name" --natnet1 "192.168/16"
This command would reserve the network addresses from 192.168.0.0 to 192.168.254.254 for the first NAT network instance of "VM name". The guest IP would be assigned to 192.168.0.15 and the default gateway could be found at 192.168.0.2.
I suggest to review the documentation for more details
http://www.virtualbox.org/manual/ch06.html
Sorry for the delayed response. I've just now re-installed VBox and created a 64-bit Oracle Linux 5.7 machine.
After reading yet again the networking chapter in the VBox user manual, I'm afraid I'm just as confused as ever. Perhaps if I detail exactly how I'm used to setting things up with VMware and the resulting behavior, we can see the corollary for VBox.
When I install VMware, it creates two network adapters on the host OS, vmnet1 and vmnet8. vmnet8 is used for NAT. I've installed on several machines and vmnet8 is always assigned an address of 192.168.something.1. The 'something' seems to vary from install to install. I'm not sure what controls the assigned value there, but have never really needed to explore that. My current setup is at 192.168.111.1.
Next, I create a virtual machine. There I configure eth0 to use a fixed IP address of 192.168.xxx.yyy, where 'xxx' matches the value of the vmnet8 adapter on the host os, and 'yyy' is assigned sequentially, starting with 101 for the first machine I create, 102 for the next, etc. When creating these machines, I've found I have to set the gateway and DNS address to 192.168.xxx.2.
With that setup,
- my guest vm can ping the host
- the host can ping the guest vm
- I can create an entry in the host os's 'hosts' file pointing to the guest vm (ie: 192.168.111.101 vmlnxsrv01.vmdomain vmlnsxrv01), then use that name to refer to the vm
- I can use an ssh client like putty (on the host os) to connect to the vm, exactly like I would connect to a remote box on my company's network
- The vm can reach the internet to do web browsing, download rpms, etc.
Now, when i installedVbox, it created one additional network adapter on the host os. It is running at 192.168.56.1
I created the virtual machine, giving it a fixed IP address of 192.168.56.111, gateway and dns address of 192.168.56.2
Ping of the vm ip address from the host returns 'host unreachable' doesn't work either direction
C:\Users\ed>ping 192.168.56.111
Pinging 192.168.56.111 with 32 bytes of data:
Reply from 192.168.56.1: Destination host unreachable.
Ping statistics for 192.168.56.111:
Packets: Sent = 1, Received = 1, Lost = 0 (0% loss),
Control-C
^CSame from the other end, pinging 192.168.56.1 and 192.168.56.2 from the vm
Tried the vboxmanage, but not sure if I gave it the correct parameters.
C:\Program Files\Oracle\VirtualBox>vboxmanage modifyvm "lnxsrv11" --natpf1 "gue
tssh,tcp,,2222,192.168.56.111,22"
C:\Program Files\Oracle\VirtualBox>ping 192.168.56.111
Pinging 192.168.56.111 with 32 bytes of data:
Reply from 192.168.56.1: Destination host unreachable.Also at this point, an attempt to establish a putty session to 192.168.56.111 times out.

Slightly off topic but a query on open type fonts

Hi all
I went to buy the frutiger fonts (9fonts) from adobe. The format is open type which is what I want. B ut when going to buy them I am asked whether I want mac or windows format. I thought open type fonts were cross platform? We have both MACs and PCs, if I want the font on both do I have to buy both formats ?
Link to font:
http://store.adobe.com/type/browser/P/P_1186.jhtml
Thanks for any help, sorry for this being off topic but I couldn't see where else to post.
gerryR

Yes, that's it, pretty much. Also, our download manager needs to know whether you're using Mac or Windows. The *contents* of the purchased file are the same.
T

Forum Atom feed and the Off-Topic forum

I'm subscribed via https://bbs.archlinux.org/extern.php?ac … der=posted and I've just noticed I don't get any notification if a new thread gets opened in Off-Topic forum. I haven't yet checked if any other forum is also excluded.
I know that I can subscribe to this forum via 'Subscribe to this forum' but according to http://projects.archlinux.org/vhosts/bb … extern.php the default feed shouldn't miss any subforums, as there are no nfids mentioned.
What am I missing?

ngoonee wrote:
Inxsible wrote:I don't mind opening the off-topic section as read only to not logged-in users/non-members
As I recall off-topic, dustbin, and TGN are log-in so that moderation there can be slightly more lenient, since its guaranteed its only our community in the place (no lurkers)? Not part of the 'main' forums in that sense, then.
EDIT: lurkers and/or bots, which is the main point.
This is correct. We don't want someone to type "Arch Linux" in a search engine and to get, as the first link, an off-topic forum thread about some random absurdities or some TGN rant. The same goes with someone visiting the forum to see what kind of community Arch Linux has before installing it. It's a question of giving a good first impression while still being able to have a good time.

How can I set it to delete messages off my server after they download?

How can I set it to delete messages off my server after they download?

IMAP email is server based. The messages stay on the server and just view them remotely with an email client like Thunderbird. If you want to keep a copy on your computer you need to move a copy of the email message to a folder under Local Folders. If you delete the message off the server, it is going to be gone otherwise.
The delete from the server option is a POP email server. It does not apply with IMAP email.

Somewhat off topic, wedding lighting and wireless lav. question

Hello everyone! This question is slightly off topic, but I'm desperate for an answer. I've been doing wedding videos for some time now and it's time to upgrade my setup. I'm currently in the market for a good, reliable wireless lavaliere mic, and a good quality on camera light. I use a panasonic DVX100b for all of my footage. For the light I'd like to spend about $400.00 ish or less, but I will spend more if the price jump dramatically increases the performance. I also have about $600 to spend on a wireless lav. system, again I will pay more if the jump in price brings a considerable jump in quality. Can anyone make any recommendations?
Thanks

Gotta go with the Sennheiser Evolution series as well. Although I can't say that the actual mics they ships with are the best, they're not bad and I've had very few issues with the range and reception.
And if you're shooting solo, aside from the mics, make sure you pick up a 2 or 3 foot XLR cable so that you have enough hose to allow you to hook the receiver on to your belt. Beats clipping it to the handle strap.
You can also get a little adapter for the DVX that will allow you to mount the mics on the camera hot shoe on the top of the handle. I'm sure you can get these for just about and wireless you buy.
rh

Suggestion: General Discussions\Off Topic Section

hi,
it would be great to have an off topic forum/section here for us to interact and have general discussions. almost every forum i'm a member of has an Off Topic section. we can get to know each other much better and share useful information and opinions about various topics, technology and others also. we can do the same through PM's, but getting everyone involved will feel much better.
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

if they start posting technical questions or spam here, then they should be banned!
EDIT: in other news, my reputation level increased!
Message Edited by DexterM on 01-07-2009 11:44 PM
Make it easier for other people to find solutions, by marking my answer with \'Accept as Solution\' if it solves your problem.
Click on the BLUE KUDOS button on the left to say "Thanks"
I am an ex-HP Employee.

Newbie wireless question (slightly off-topic)

I didn't want to post this here as it's not entirely an Airport-specific question. I posted this to the iBook forums, but nobody there has answered so my apologies if this is not welcome here. (Any moderators can remove it if that's the case.)
I've been using computers extensively for over a decade, but I'm a total newbie to wifi. I just set up a wireless network in my house and would appreciate some advice/feedback.
My main concerns are whether or not my network is reasonably secure. I know there is no such thing as perfect security, but I don't know if what I've done is good enough or not.
I don't have an Airport base station, but I do have a D-Link Airplus G and an Airport card in my iBook. I have WEP set up on the router and I have enabled MAC filtering, listing only my desktop and my iBook, excluding all others from the network.
I'm fairly certain that nobody in my neighborhood is going to get into my machines this way or be able to sniff my network data stream, but am I right in assuming that nobody can "piggyback" on my Internet connection too? Presumably, if everyone but my own machines are MAC-filtered and kept out, then the Internet connection is also protected. Is that how it works?

WEP and MAC filtering are better than nothing, but you can do better. These are my suggestions:
1. Use WPA with a pre-shared key (PSK) and TKIP encryption on your Netgear router, along with an alphanumeric passphrase of at least eight characters not found in any dictionary. The equivalent setting on your Mac is "WPA Personal". Unlike WEP security (which an expert can crack in under half an hour), WPA security is currently unhackable by any practical means as long as you use a non-dictionary passphrase. One last point - WPA security requires all your wireless Macs to be running MacOS 10.3 or newer.
2. MAC filtering is (these days) essentially useless as a wireless security method. Using "packet sniffing" of traffic on your wireless network to find out what MAC addresses are used by computers on your network, and a PC that allows its MAC address to be cloned so that it is identical to the MAC address of one your own wireless computers (which is possible with most PC wireless network adapters) even an amateur hacker can defeat MAC address filtering in minutes.
By the way - I don't think your posted message here is off topic. In my opinion, the Airport discussion forums are the best place to post any questions related to usage of wireless networks. Questions of this nature are virtually never specific to any Mac model.

Slightly off topic - ATI test demos

Hi,
Slightly off topic question but...
Many years ago a friend of mine (albeit a PC user) showed me a graphics card render demo which was a take on the Lobby Scene from The Matrix, designed to show of his (then) high powered graphics card (this was about 8 years ago)
I was wondering if anyone knew of any websites that had these ATI graphics card rendering demos that would show off the power of the ATI X1900 card - I don't mean the .mov and .avi pre-rendered demo videos that are on ATi's site - I've already checked and the only ones they have are the ones for the older x800, what I'm after are things that are more like applications you run that render the video live. (ATI/AMD do have some but they are very old - when SmartShader 2.0 was released)
Anyone know? or alternatively, any other rendering apps that can show of my 512mb's of graphics card-age?
This is purely for entertainment...
Many thanks!
Regards,
Ben
I hope this makes sense!

Usually push connectors for bare wires are designed for less or up to 200 circles ....
Depending on the number of test performed, mounting time, ... I would ask the push button manufacturers for test fixture connectors . Take the linecard of some distributors (digikey, RS ... ) to find them.
Might not be the cheapest solution on the first run, but for daily use good connectors are always worth the money.
Greetings from Germany
Henrik
LV since v3.1
“ground” is a convenient fantasy
'˙˙˙˙uıɐƃɐ lɐıp puɐ °06 ǝuoɥd ɹnoʎ uɹnʇ ǝsɐǝld 'ʎɹɐuıƃɐɯı sı pǝlɐıp ǝʌɐɥ noʎ ɹǝqɯnu ǝɥʇ'

Slightly off topic: JDev + 10g + recommended laptop

Hi gang
This is a slightly off-topic post in the forum. Apologies to the forum moderators up front.
I'm in the process of purchasing a new laptop for development. Among other things I need to run Oracle 10g, + JDev + Solitaire.
My assumption for such a laptop is I'll need a fast hd (7200rpm+) for builds, and lots of memory to run Oracle 10g and memory hogging Java JDev. Also extra screen real-estate would be ideal with the multi-pane JDev.
However without the ability to walk into a laptop supplier, load up the software and do some tests, I'm not sure what would be sufficient. I don't want to go overboard on features in order to save $s, but I don't want something that wont run fast enough without bugging the Hell out of me either.
Does anybody have any recommendations on what laptop they are currently running or what they would buy to run Oracle 10g + JDev? Are my assumptions correct or does anybody run this config with less, happily?
Any help appreciated.
Cheers,
CM.

I have been doing all of my jdev + oracle development exclusively on my PowerBook G4 for over a year now. JDev 9.0.5.2 runs great, and so does the new 10.1.3 preview. I have upgraded the memory on it to 1.5 GB, but even with the stock 512 it ran well. Plus, there are all of the productivity benefits from running Mac OS X. I was skeptical about it at first, as you might be, but once I switched over, I haven't even looked back. The 17 inch screen is beautiful, it works just fine on the Windows network at work, has all of the Unix tools underneath, and for the very few times a windows machine is needed, Virtual PC helps out. Do yourself a favor and check it out.
Mike

I tryed to download a movie off of itunes and it downloaded but wont sync into my ipod

i downloaded a movie off of itunes and it downloaded but wont sync it says the ipod is synced with another itunes library do you want to erase this ipod and sync with this itunes library .an ipod can be synced with only one itunes library at a time erasing and syncing replaces the contense of this ipod with the contense with this itunes library does that mean that if i sync the movie it will erase everything on the ipod and only put the movie and if it does can i put it back on with the movie still on it

You can do it by manually managing music and videos. See:
iOS: Issues syncing content with multiple computers using iTunes
If you have iTunes 11 turn on the Sidebar. Go to iTunes>View and click on Show Sidebar. You can also do a Crtl+S to show the sidebar.
To sync to your iPod go to iTunes>Help>iTunes Help>Sync your iPod....>Sync You Device>Set up Syncing>Sync your device manually and follow the instructions

(off topic) BEWARE OF CNET DOWNLOADS!!!!

Similar Messages

Maybe you are looking for