Off topic:  Tools for to Merge Source Code

Hi
somebody some tool that did merge between 2 source code, to compare and to update a of side source code when show they is not equal, (of course, It did it when We want)
thank

Most version control system offer such a thing. Check out subversion as one example.
Also TOAD has a "compare files" function. You might even go for MS Word to check differences between two files.
Your source code must be saved as a file fist of cause.

Similar Messages

  • Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?

    Are there any good tool for checking security risks, Code review, memory leakages for SharePoint projects?
    I found one such tool "Fortify" in the below link. Are there any such kind of tools available which supports SharePoint?
    Reference: http://www.securityresearch.at/en/development/fortify/
    Amalaraja Fernando,
    SharePoint Architect
    Please Mark As Answer if my post solves your problem or Vote As Helpful if a post has been helpful for you. This post is provided "AS IS" with no warrenties and confers no rights.

    Hi Amalaraja Fernando,
    I'm not sure that there is one more tool that combines all these features. But you may take a look at these solutions:
    SharePoint diagnostic manager
    SharePoint enterprise manager
    What is SPCop SharePoint Code Analysis?
    Dmitry
    Lightning Tools Check
    out our SharePoint tools and web parts |
    Lightning Tools Blog | Мой Блог

  • Access Java Proposals for a java source code programmatically

    Hi,
    Problem
    Programmatically get java proposals for a java source code (not byte code) via eclipse bundle
    Description
    I am developing one eclipse osgi bundle to correct java source code automatically. I am running osgi bundle inside eclipse itself [Version: Mars Release (4.5.0)]. I am able to get java project object and a class object inside it which I want to correct. Every time I try to collect java code proposals as I put one test file which can be corrected (like duplicate imports), I receive below error:
    Java code line
    JavaCorrectionProcessor.collectCorrections(context, new IProblemLocation[] { problem }, proposals);
    Error description
    !ENTRY org.eclipse.jdt.ui 4 2 2015-07-27 18:57:09.196
    !MESSAGE Problems occurred when invoking code from plug-in: "org.eclipse.jdt.ui".
    !STACK 0
    java.lang.IllegalStateException: Workbench has not been created yet.
    at org.eclipse.ui.PlatformUI.getWorkbench(PlatformUI.java:93)
    at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.install(ASTProvider.java:236)
    at org.eclipse.jdt.internal.ui.javaeditor.ASTProvider.<init>(ASTProvider.java:227)
    at org.eclipse.jdt.internal.ui.JavaPlugin.getASTProvider(JavaPlugin.java:741)
    at org.eclipse.jdt.ui.SharedASTProvider.getAST(SharedASTProvider.java:128)
    at org.eclipse.jdt.internal.ui.text.correction.AssistContext.getASTRoot(AssistContext.java:119)
    at org.eclipse.jdt.internal.ui.text.correction.LocalCorrectionsSubProcessor.addUnusedMemberProposal(LocalCorrectionsSubProcessor.java:669)
    at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.process(QuickFixProcessor.java:530)
    at org.eclipse.jdt.internal.ui.text.correction.QuickFixProcessor.getCorrections(QuickFixProcessor.java:316)
    at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionCollector.safeRun(JavaCorrectionProcessor.java:378)
    at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.run(JavaCorrectionProcessor.java:339)
    at org.eclipse.core.runtime.SafeRunner.run(SafeRunner.java:42)
    at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor$SafeCorrectionProcessorAccess.process(JavaCorrectionProcessor.java:335)
    at org.eclipse.jdt.internal.ui.text.correction.JavaCorrectionProcessor.collectCorrections(JavaCorrectionProcessor.java:468)

    Any code from org.eclipse.jdt.ui (or the non-API code in org.eclipse.jdt.internal.ui) is likely to require a running workbench. Only the code from org.eclipse.jdt.core is guaranteed to work headlessly.

  • Report  for downloading the source code of a Program

    Hi.
    Need a code to download the source code of a Program in a text file and all the includes of that program in a separate coressponding files. <b>This should be with scan and read report statements.It should be with classe CL_GUI_FRONTEND_SERVICES  but not with function modules.</b>
    Thanks in advance.
    Regards,
    Asha

    Hi Asha
    Use the below program for your purpose.
    Report: ZKBPROGS             *
    Function   : Up/Download ABAP reports complete with texts            *
    Change Log :                 *
    July 5, 1999         *
       - Combined existing programs that did the upload and download into*
       - one program.            *
       - Changed format that the reports are saved in to be compatible   *
         with Wolfgang Morgenthaler's upload/download program(YSTRASN00  *
         at www.antarcon.de).  Major differences between this program and*
         Wolfgang's are:
            - this program does not update TRDIR with the                *
              TRDIR entries that are in the program uploaded.  Instead,  *
              current users stats are used.          *
            - this program allows selection of reports from a list or    *
              a single report can be tuped in and uploaded               *
            - this program also updates TADIR so that a development class*
              is assigned to the program             *
            - this program checks to see if the program already has a    *
              TRDIR entry, and if it does, warns the user                *
            - this program will save/restore the program documenation too*
    REPORT ZKBPROGS
           NO STANDARD PAGE HEADING
           LINE-SIZE  255.
    Declare Database Objects     *
    tables:
      DOKIL,
      TRDIR.
    Constants*
    CONSTANTS:
      MC_TRDIR_IDENTIFIER(72)  TYPE C VALUE '%&%& RDIR',
      MC_REPORT_IDENTIFIER(72) TYPE C VALUE '%&%& REPO',
      MC_TEXT_IDENTIFIER(72)   TYPE C VALUE '%&%& TEXP',
      MC_THEAD_IDENTIFIER(72)  TYPE C VALUE '%&%& HEAD',
      MC_DOC_IDENTIFIER(72)    TYPE C VALUE '%&%& DOKL',
      MC_TRDIR_SHORT(4)        TYPE C VALUE 'RDIR',
      MC_REPORT_SHORT(4)       TYPE C VALUE 'REPO',
      MC_TEXT_SHORT(4)         TYPE C VALUE 'TEXP',
      MC_THEAD_SHORT(4)        TYPE C VALUE 'HEAD',
      MC_DOC_SHORT(4)          TYPE C VALUE 'DOKP'.
    Declare Module level data structures             *
    DATA: BEGIN OF MTAB_PROGRAM_SOURCE OCCURS 0,
            LINE(72) TYPE C,
          END OF MTAB_PROGRAM_SOURCE.
    DATA: MTAB_PROGRAM_TRDIR LIKE TRDIR OCCURS 0 WITH HEADER LINE.
    DATA: MTAB_PROGRAM_TEXTS LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
    DATA: MSTR_THEAD LIKE THEAD.
    DATA: BEGIN OF MTAB_PROGRAM_FILE OCCURS 0,
            LINE(275) TYPE C,
          END OF MTAB_PROGRAM_FILE.
    DATA: BEGIN OF MTAB_DIRECTORY OCCURS 0,
            NAME LIKE TRDIR-NAME,
            DESC(72) TYPE C,
            SAVENAME LIKE RLGRAP-FILENAME,
          END OF MTAB_DIRECTORY.
    DATA: BEGIN OF MTAB_PROGRAM_DOCUMENTATION OCCURS 0,
            LINE(255) TYPE C,
          END OF MTAB_PROGRAM_DOCUMENTATION.
    Selection Screen             *
    *-- Options for upload/download of programs
    SELECTION-SCREEN BEGIN OF BLOCK FRM_OPTIONS WITH FRAME TITLE TEXT-UDL.
    PARAMETERS:
      RB_DOWN RADIOBUTTON GROUP UDL DEFAULT 'X'.       " Download reports
    SELECTION-SCREEN BEGIN OF BLOCK FRM_TRDIR WITH FRAME TITLE TEXT-DIR.
    SELECT-OPTIONS:
      S_NAME  FOR TRDIR-NAME,              " Program Name
      S_SUBC  FOR TRDIR-SUBC               " Program Type
              DEFAULT 'F' OPTION EQ SIGN E," Exclude Functions by default
      S_CNAM  FOR TRDIR-CNAM               " Created by
              DEFAULT SY-UNAME,
      S_UNAM  FOR TRDIR-UNAM,              " Last Changed by
      S_CDAT  FOR TRDIR-CDAT,              " Creation date
      S_UDAT  FOR TRDIR-UDAT.              " Last update date
    SELECTION-SCREEN END OF BLOCK FRM_TRDIR.
    *-- Options for uploading programs
    PARAMETERS:
      RB_UP   RADIOBUTTON GROUP UDL.       " Upload reports
    SELECTION-SCREEN BEGIN OF BLOCK FRM_UPLOAD WITH FRAME TITLE TEXT-UPL.
    SELECTION-SCREEN BEGIN OF LINE.
    SELECTION-SCREEN COMMENT 1(29) TEXT-SNG.
    PARAMETERS:
      RB_FILE RADIOBUTTON GROUP HOW DEFAULT 'X'.
    SELECTION-SCREEN COMMENT 33(42) TEXT-FNA.
    SELECTION-SCREEN END OF LINE.
    PARAMETERS:
      RB_LIST RADIOBUTTON GROUP HOW.
    SELECTION-SCREEN END OF BLOCK FRM_UPLOAD.
    SELECTION-SCREEN END OF BLOCK FRM_OPTIONS.
    *-- Options for up/downloading programs
    SELECTION-SCREEN BEGIN OF BLOCK FRM_FILEN WITH FRAME TITLE TEXT-FIL.
    PARAMETERS:
      RB_DOS  RADIOBUTTON GROUP FIL DEFAULT 'X', " Save to local
      RB_UNIX RADIOBUTTON GROUP FIL,       " Save to UNIX
      P_PATH  LIKE RLGRAP-FILENAME         " Path to save files to
            DEFAULT 'c:\temp\'.
    SELECTION-SCREEN END OF BLOCK FRM_FILEN.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-LOW.
      CALL FUNCTION 'F4_PROGRAM'
           EXPORTING
                OBJECT             = S_NAME-LOW
                SUPPRESS_SELECTION = 'X'
           IMPORTING
                RESULT             = S_NAME-LOW
           EXCEPTIONS
                OTHERS             = 1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_NAME-HIGH.
      CALL FUNCTION 'F4_PROGRAM'
           EXPORTING
                OBJECT             = S_NAME-HIGH
                SUPPRESS_SELECTION = 'X'
           IMPORTING
                RESULT             = S_NAME-HIGH
           EXCEPTIONS
                OTHERS             = 1.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-LOW.
      PERFORM GET_NAME USING 'S_UNAM-LOW'
                    CHANGING S_UNAM-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_UNAM-HIGH.
      PERFORM GET_NAME USING 'S_UNAM-HIGH'
                    CHANGING S_UNAM-HIGH.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-LOW.
      PERFORM GET_NAME USING 'S_CNAM-LOW'
                    CHANGING S_CNAM-LOW.
    AT SELECTION-SCREEN ON VALUE-REQUEST FOR S_CNAM-HIGH.
      PERFORM GET_NAME USING 'S_CNAM-HIGH'
                    CHANGING S_CNAM-HIGH.
    TOP-OF-PAGE.
      IF RB_LIST = 'X'.
        FORMAT COLOR COL_HEADING.
        NEW-LINE.
        WRITE: AT 3 TEXT-H01,
               AT 15 TEXT-H03.
        FORMAT COLOR OFF.
      ENDIF.
    AT LINE-SELECTION.
      CHECK RB_LIST = 'X'.                 " only do in list mode
      READ LINE SY-CUROW FIELD VALUE MTAB_DIRECTORY-SAVENAME.
    *-- Read file into an internal table
      PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
                USING  MTAB_DIRECTORY-SAVENAME.
    *-- Split table into TADIR entry, report lines, and report text
      PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
                     MTAB_PROGRAM_SOURCE
                     MTAB_PROGRAM_TEXTS
                     MTAB_PROGRAM_DOCUMENTATION
            CHANGING TRDIR
                     MSTR_THEAD.
    *-- Save all of the data
      PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
                   MTAB_PROGRAM_TEXTS
                   MTAB_PROGRAM_DOCUMENTATION
            USING  TRDIR
                   MSTR_THEAD.
    Start of processing          *
    START-OF-SELECTION.
      FORMAT COLOR COL_NORMAL.
      IF RB_DOWN = 'X'.
        PERFORM DOWNLOAD_REPORTS.
      ELSEIF RB_UP = 'X'.
        PERFORM UPLOAD_REPORTS.
      ENDIF.
    END-OF-SELECTION.
      IF RB_DOWN = 'X'.
        CONCATENATE P_PATH
                    'directory.txt'
          INTO P_PATH.
        PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_DIRECTORY
               USING  P_PATH.
      ENDIF.
          FORM UPLOAD_REPORTS   *
    FORM UPLOAD_REPORTS.
    *-- Can upload a reports entered in selection criteria or
    *-- select from a list.  List can be from index.txt in same directory
    *-- (created by the download) or by reading the first line of each file
    *-- in the directory.
      IF RB_FILE = 'X'. " Upload single program from a file
    *-- Read file into an internal table
        PERFORM READ_REPORT_FROM_DISK TABLES MTAB_PROGRAM_FILE
                  USING  P_PATH.
    *-- Split table into TADIR entry, report lines, and report text
        PERFORM SPLIT_INCOMING_FILE TABLES MTAB_PROGRAM_FILE
                       MTAB_PROGRAM_SOURCE
                       MTAB_PROGRAM_TEXTS
                       MTAB_PROGRAM_DOCUMENTATION
              CHANGING TRDIR
                       MSTR_THEAD.
    *-- Save all of the data
        PERFORM INSERT_NEW_REPORT TABLES MTAB_PROGRAM_SOURCE
                     MTAB_PROGRAM_TEXTS
                     MTAB_PROGRAM_DOCUMENTATION
              USING  TRDIR
                     MSTR_THEAD.
      ELSEIF RB_LIST = 'X'. " Show list for user to choose from
    *-- get list of report names/descriptions from directory text
        CONCATENATE P_PATH
                    'directory.txt'
        INTO P_PATH.
        PERFORM READ_REPORT_FROM_DISK TABLES MTAB_DIRECTORY
                  USING  P_PATH.
        SORT MTAB_DIRECTORY.
    *-- Write out list of report names/descriptions
        LOOP AT MTAB_DIRECTORY.
          WRITE:
            / MTAB_DIRECTORY-NAME UNDER TEXT-H01,
              MTAB_DIRECTORY-DESC UNDER TEXT-H03,
              MTAB_DIRECTORY-SAVENAME.
        ENDLOOP.
    *-- Process user selections for reports to upload.
      ENDIF.
    ENDFORM.           " upload_reports
          FORM DOWNLOAD_REPORTS *
          From the user selections, get all programs that meet the      *
          criteria, and save them in ftab_program_directory.            *
          Also save the report to disk.             *
    FORM DOWNLOAD_REPORTS.
      DATA:
        LC_FULL_FILENAME LIKE RLGRAP-FILENAME.
    *-- The table is put into an internal table because the program will
    *-- abend if multiple transfers to a dataset occur within a SELECT/
    *-- ENDSELCT (tested on 3.1H)
      SELECT * FROM  TRDIR
             INTO TABLE MTAB_PROGRAM_TRDIR
             WHERE  NAME  IN S_NAME
             AND    SUBC  IN S_SUBC
             AND    CNAM  IN S_CNAM
             AND    UNAM  IN S_UNAM
             AND    CDAT  IN S_CDAT
             AND    UDAT  IN S_UDAT.
      LOOP AT MTAB_PROGRAM_TRDIR.
    *-- Clear out text and source code tables
        CLEAR:
          MTAB_PROGRAM_FILE,
          MTAB_PROGRAM_SOURCE,
          MTAB_PROGRAM_TEXTS,
          MTAB_PROGRAM_DOCUMENTATION.
        REFRESH:
          MTAB_PROGRAM_FILE,
          MTAB_PROGRAM_SOURCE,
          MTAB_PROGRAM_TEXTS,
          MTAB_PROGRAM_DOCUMENTATION.
    *-- Get the report
        READ REPORT MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_SOURCE.
    *-- Get the text for the report
        READ TEXTPOOL MTAB_PROGRAM_TRDIR-NAME INTO MTAB_PROGRAM_TEXTS.
    *-- Get the documentation for the report
        CLEAR DOKIL.
        SELECT * UP TO 1 ROWS FROM DOKIL
               WHERE  ID          = 'RE'
               AND    OBJECT      = MTAB_PROGRAM_TRDIR-NAME
               AND    LANGU       = SY-LANGU
               AND    TYP         = 'E'
               ORDER BY VERSION DESCENDING.
        ENDSELECT.
    *-- Documentation exists for this object
        IF SY-SUBRC = 0.
          CALL FUNCTION 'DOCU_READ'
               EXPORTING
                    ID      = DOKIL-ID
                    LANGU   = DOKIL-LANGU
                    OBJECT  = DOKIL-OBJECT
                    TYP     = DOKIL-TYP
                    VERSION = DOKIL-VERSION
               IMPORTING
                    HEAD    = MSTR_THEAD
               TABLES
                    LINE    = MTAB_PROGRAM_DOCUMENTATION
               EXCEPTIONS
                    OTHERS  = 1.
        ENDIF.
    *-- Put the report code and texts into a single file
    *-- Put the identifier line in so that the start of the TRDIR line
    *-- is marked
        CONCATENATE MC_TRDIR_IDENTIFIER
        MTAB_PROGRAM_TRDIR-NAME
        INTO MTAB_PROGRAM_FILE-LINE.
        APPEND MTAB_PROGRAM_FILE.
    *-- Add the TRDIR line
        MTAB_PROGRAM_FILE-LINE = MTAB_PROGRAM_TRDIR.
        APPEND MTAB_PROGRAM_FILE.
    *-- Put the identifier line in so that the start of the report code
    *-- is marked
        CONCATENATE MC_REPORT_IDENTIFIER
                    MTAB_PROGRAM_TRDIR-NAME
          INTO MTAB_PROGRAM_FILE-LINE.
        APPEND MTAB_PROGRAM_FILE.
    *-- Add the report code
        LOOP AT MTAB_PROGRAM_SOURCE.
          MTAB_PROGRAM_FILE = MTAB_PROGRAM_SOURCE.
          APPEND MTAB_PROGRAM_FILE.
        ENDLOOP.
    *-- Put the identifier line in so that the start of the report text
    *-- is marked
        CONCATENATE MC_TEXT_IDENTIFIER
                    MTAB_PROGRAM_TRDIR-NAME
          INTO MTAB_PROGRAM_FILE-LINE.
        APPEND MTAB_PROGRAM_FILE.
    *-- Add the report texts
        LOOP AT MTAB_PROGRAM_TEXTS.
          MTAB_PROGRAM_FILE = MTAB_PROGRAM_TEXTS.
          APPEND MTAB_PROGRAM_FILE.
        ENDLOOP.
    *-- Put the identifier line in so that the start of the THEAD record
    *-- is marked
        CONCATENATE MC_THEAD_IDENTIFIER
                    MTAB_PROGRAM_TRDIR-NAME
          INTO MTAB_PROGRAM_FILE-LINE.
        APPEND MTAB_PROGRAM_FILE.
        MTAB_PROGRAM_FILE = MSTR_THEAD.
        APPEND MTAB_PROGRAM_FILE.
    *-- Put the identifier line in so that the start of the report
    *-- documentation is marked
        CONCATENATE MC_DOC_IDENTIFIER
                    MTAB_PROGRAM_TRDIR-NAME
          INTO MTAB_PROGRAM_FILE-LINE.
        APPEND MTAB_PROGRAM_FILE.
    *-- Add the report documentation
        LOOP AT MTAB_PROGRAM_DOCUMENTATION.
          MTAB_PROGRAM_FILE = MTAB_PROGRAM_DOCUMENTATION.
          APPEND MTAB_PROGRAM_FILE.
        ENDLOOP.
    *-- Make the fully pathed filename that report will be saved to
        CONCATENATE P_PATH
                    MTAB_PROGRAM_TRDIR-NAME
                    '.txt'
          INTO LC_FULL_FILENAME.
        PERFORM SAVE_TABLE_TO_FILE TABLES MTAB_PROGRAM_FILE
               USING  LC_FULL_FILENAME.
    *-- Write out message with Program Name/Description
        READ TABLE MTAB_PROGRAM_TEXTS WITH KEY ID = 'R'.
        IF SY-SUBRC = 0.
          MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
          MTAB_DIRECTORY-DESC = MTAB_PROGRAM_TEXTS-ENTRY.
          MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
          APPEND MTAB_DIRECTORY.
          WRITE: / MTAB_PROGRAM_TRDIR-NAME,
                   MTAB_PROGRAM_TEXTS-ENTRY(65) COLOR COL_HEADING.
        ELSE.
          MTAB_DIRECTORY-NAME = MTAB_PROGRAM_TRDIR-NAME.
          MTAB_DIRECTORY-DESC = 'No description available'.
          MTAB_DIRECTORY-SAVENAME = LC_FULL_FILENAME.
          APPEND MTAB_DIRECTORY.
          WRITE: / MTAB_PROGRAM_TRDIR-NAME.
        ENDIF.
      ENDLOOP.
    ENDFORM.           " BUILD_PROGRAM_DIRECTORY
          FORM SAVE_TABLE_TO_FILE                   *
    -->  FTAB_TABLE            *
    -->  F_FILENAME            *
    FORM SAVE_TABLE_TO_FILE TABLES FTAB_TABLE
        USING  F_FILENAME.
      IF RB_DOS = 'X'.                  " Save file to presentation server
        CALL FUNCTION 'WS_DOWNLOAD'
             EXPORTING
                  FILENAME = F_FILENAME
                  FILETYPE = 'ASC'
             TABLES
                  DATA_TAB = FTAB_TABLE
             EXCEPTIONS
                  OTHERS   = 4.
        IF SY-SUBRC NE 0.
          WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
                   F_FILENAME COLOR COL_NEGATIVE.
        ENDIF.
      ELSE.            " Save file to application server
        OPEN DATASET F_FILENAME FOR OUTPUT IN TEXT MODE.
        IF SY-SUBRC = 0.
          LOOP AT FTAB_TABLE.
            TRANSFER FTAB_TABLE TO F_FILENAME.
            IF SY-SUBRC NE 0.
              WRITE: / 'Error writing record to file;' COLOR COL_NEGATIVE,
                       F_FILENAME COLOR COL_NEGATIVE.
            ENDIF.
          ENDLOOP.
        ELSE.
          WRITE: / 'Error opening dataset' COLOR COL_NEGATIVE,
                   F_FILENAME COLOR COL_NEGATIVE.
        ENDIF.
      ENDIF.           " End RB_DOS
    ENDFORM.           " SAVE_PROGRAM
          FORM READ_REPORT_FROM_DISK                *
          Read report into internal table.  Can read from local or      *
          remote computer       *
    FORM READ_REPORT_FROM_DISK TABLES FTAB_TABLE
           USING  F_FILENAME.
      DATA:
         LC_MESSAGE(128) TYPE C.
      CLEAR   FTAB_TABLE.
      REFRESH FTAB_TABLE.
      IF RB_DOS = 'X'.
        TRANSLATE F_FILENAME USING '/\'.   " correct slash for Dos PC file
        CALL FUNCTION 'WS_UPLOAD'
             EXPORTING
                  FILENAME            = F_FILENAME
                  FILETYPE            = 'ASC'
             TABLES
                  DATA_TAB            = FTAB_TABLE
             EXCEPTIONS
                  CONVERSION_ERROR    = 1
                  FILE_OPEN_ERROR     = 2
                  FILE_READ_ERROR     = 3
                  INVALID_TABLE_WIDTH = 4
                  INVALID_TYPE        = 5
                  NO_BATCH            = 6
                  UNKNOWN_ERROR       = 7
                  OTHERS              = 8.
        IF SY-SUBRC >< 0.
          WRITE: / 'Error reading file from local PC' COLOR COL_NEGATIVE.
        ENDIF.
      ELSEIF RB_UNIX = 'X'.
        TRANSLATE F_FILENAME USING '\/'.   " correct slash for unix
        OPEN DATASET F_FILENAME FOR INPUT MESSAGE LC_MESSAGE IN TEXT MODE.
        IF SY-SUBRC = 0.
          DO.
            READ DATASET F_FILENAME INTO FTAB_TABLE.
            IF SY-SUBRC = 0.
              APPEND FTAB_TABLE.
            ELSE.
              EXIT.
            ENDIF.
          ENDDO.
          CLOSE DATASET F_FILENAME.
        ELSE.
          WRITE: / 'Error reading file from remote computer'
      COLOR COL_NEGATIVE,
                 / LC_MESSAGE,
                 / F_FILENAME.
          SY-SUBRC = 4.
        ENDIF.
      ENDIF.
    ENDFORM.           " READ_REPORT_FROM_DISK
          FORM SPLIT_INCOMING_FILE                  *
    -->  FTAB_PROGRAM_FILE     *
    -->  FTAB_PROGRAM_SOURCE   *
    -->  ` *
    -->  FTAB_PROGRAM_TEXTS    *
    FORM SPLIT_INCOMING_FILE TABLES FTAB_PROGRAM_FILE
                     STRUCTURE MTAB_PROGRAM_FILE
                FTAB_PROGRAM_SOURCE
                     STRUCTURE MTAB_PROGRAM_SOURCE
                FTAB_PROGRAM_TEXTS
                     STRUCTURE MTAB_PROGRAM_TEXTS
                FTAB_PROGRAM_DOCUMENTATION
                    STRUCTURE MTAB_PROGRAM_DOCUMENTATION
       CHANGING FSTR_TRDIR
                FSTR_THEAD.
      DATA:
        LC_DATATYPE(4) TYPE C,             " Type of data, REPO, TEXP, RDIR
        LC_PROGRAM_FILE LIKE MTAB_PROGRAM_FILE.
      LOOP AT FTAB_PROGRAM_FILE.
        LC_PROGRAM_FILE = FTAB_PROGRAM_FILE.
        CASE LC_PROGRAM_FILE(9).
          WHEN MC_TRDIR_IDENTIFIER.
            LC_DATATYPE = MC_TRDIR_SHORT.
          WHEN MC_REPORT_IDENTIFIER.
            LC_DATATYPE = MC_REPORT_SHORT.
          WHEN MC_TEXT_IDENTIFIER.
            LC_DATATYPE = MC_TEXT_SHORT.
          WHEN MC_DOC_IDENTIFIER.
            LC_DATATYPE = MC_DOC_SHORT.
          WHEN MC_THEAD_IDENTIFIER.
            LC_DATATYPE = MC_THEAD_SHORT.
          WHEN OTHERS. " Actual contents of report, trdir, or text
            CASE LC_DATATYPE.
              WHEN MC_TRDIR_SHORT.
                FSTR_TRDIR = FTAB_PROGRAM_FILE.
              WHEN MC_REPORT_SHORT.
                FTAB_PROGRAM_SOURCE = FTAB_PROGRAM_FILE.
                APPEND FTAB_PROGRAM_SOURCE.
              WHEN MC_TEXT_SHORT.
                FTAB_PROGRAM_TEXTS = FTAB_PROGRAM_FILE.
                APPEND FTAB_PROGRAM_TEXTS.
              WHEN MC_THEAD_SHORT.
                FSTR_THEAD = FTAB_PROGRAM_FILE.
              WHEN MC_DOC_SHORT.
                FTAB_PROGRAM_DOCUMENTATION = FTAB_PROGRAM_FILE.
                APPEND FTAB_PROGRAM_DOCUMENTATION.
            ENDCASE.
        ENDCASE.
      ENDLOOP.
    ENDFORM.           " SPLIT_INCOMING_FILE
          FORM INSERT_NEW_REPORT*
    -->  FTAB_PROGRAM_SOURCE   *
    -->  FTAB_PROGRAM_TEXTS    *
    -->  F_TRDIR               *
    FORM INSERT_NEW_REPORT TABLES FTAB_PROGRAM_SOURCE
                  STRUCTURE MTAB_PROGRAM_SOURCE
              FTAB_PROGRAM_TEXTS
                   STRUCTURE MTAB_PROGRAM_TEXTS
              FTAB_PROGRAM_DOCUMENTATION
                   STRUCTURE MTAB_PROGRAM_DOCUMENTATION
       USING  FSTR_TRDIR LIKE TRDIR
              FSTR_THEAD LIKE MSTR_THEAD.
      DATA:
        LC_OBJ_NAME LIKE E071-OBJ_NAME,
        LC_LINE2(40)     TYPE C,
        LC_ANSWER(1)     TYPE C.
    *-- read trdir to see if the report already exists, if it does, prompt
    *-- user to overwrite or abort.
      SELECT SINGLE * FROM TRDIR WHERE NAME = FSTR_TRDIR-NAME.
      IF SY-SUBRC = 0. " Already exists
        CONCATENATE 'want to overwrite report'
                    FSTR_TRDIR-NAME
          INTO LC_LINE2 SEPARATED BY SPACE.
        CONCATENATE LC_LINE2
          INTO LC_LINE2.
        CALL FUNCTION 'POPUP_TO_CONFIRM_STEP'
             EXPORTING
                  DEFAULTOPTION  = 'N'
                  TEXTLINE1   = 'The selected report already exists, do you'
                  TEXTLINE2      = LC_LINE2
                  TITEL          = 'Report already exists'
                  CANCEL_DISPLAY = SPACE
             IMPORTING
                  ANSWER         = LC_ANSWER
             EXCEPTIONS
                  OTHERS         = 1.
      ELSE.
        LC_ANSWER = 'J'.
      ENDIF.
      IF LC_ANSWER = 'J'.
    *-- Create the TADIR entry.  (TRDIR entry created by INSERT REPORT)
        LC_OBJ_NAME = TRDIR-NAME.
        CALL FUNCTION 'TR_TADIR_POPUP_ENTRY_E071'
             EXPORTING
                  WI_E071_PGMID     = 'R3TR'
                  WI_E071_OBJECT    = 'PROG'
                  WI_E071_OBJ_NAME  = LC_OBJ_NAME
                  WI_TADIR_DEVCLASS = '$TMP'
             EXCEPTIONS
                  EXIT              = 3
                  OTHERS            = 4.
        IF SY-SUBRC = 0.
    *-- Create Report
          INSERT REPORT FSTR_TRDIR-NAME FROM FTAB_PROGRAM_SOURCE.
    *-- Create Texts
          INSERT TEXTPOOL FSTR_TRDIR-NAME FROM FTAB_PROGRAM_TEXTS
                 LANGUAGE SY-LANGU.
    *-- Save Documentation
          CALL FUNCTION 'DOCU_UPDATE'
               EXPORTING
                    HEAD    = FSTR_THEAD
                    STATE   = 'A'
                    TYP     = 'E'
                    VERSION = '1'
               TABLES
                    LINE    = FTAB_PROGRAM_DOCUMENTATION
               EXCEPTIONS
                    OTHERS  = 1.
        ELSE.
          WRITE: / 'Error updating the TADIR entry' COLOR COL_NEGATIVE,
                   'Program' COLOR COL_NEGATIVE INTENSIFIED OFF,
                   FSTR_TRDIR-NAME, 'was not loaded into SAP.'
                      COLOR COL_NEGATIVE INTENSIFIED OFF.
        ENDIF.
      ELSE.
        WRITE: / FSTR_TRDIR-NAME COLOR COL_NEGATIVE,
                 'was not uploaded into SAP.  Action cancelled by user'
                     COLOR COL_NEGATIVE INTENSIFIED OFF.
      ENDIF.
    ENDFORM.           " INSERT_NEW_REPORT
          FORM GET_NAME         *
    -->  VALUE(F_FIELD)        *
    -->  F_NAME                *
    FORM GET_NAME USING VALUE(F_FIELD)
               CHANGING F_NAME.
      DATA: LTAB_FIELDS LIKE DYNPREAD OCCURS 0 WITH HEADER LINE,
            LC_PROG LIKE D020S-PROG,
            LC_DNUM LIKE D020S-DNUM.
      TRANSLATE F_FIELD TO UPPER CASE.
      refresh ltab_fields.
      LTAB_FIELDS-FIELDNAME = F_FIELD.
      append ltab_fields.
      LC_PROG =  SY-REPID .
      LC_DNUM =  SY-DYNNR .
      CALL FUNCTION 'DYNP_VALUES_READ'
           EXPORTING
                DYNAME     = LC_PROG
                DYNUMB     = LC_DNUM
           TABLES
                dynpfields = ltab_fields
           EXCEPTIONS
                OTHERS     = 01.
      read table ltab_fields index 1.
      IF SY-SUBRC EQ 0.
        F_NAME = LTAB_FIELDS-FIELDVALUE.
        refresh ltab_fields.
      ENDIF.
      CALL FUNCTION 'F4_USER'
           EXPORTING
                OBJECT = F_NAME
           IMPORTING
                RESULT = F_NAME.
    ENDFORM.           " GET_NAME
    Regards,
    Sree

  • Waiting for aging report source code

    Hi,
    Please give the source code snippet for the following case.
    aging analysis program for open items:-
    payments not receivecd for 15 days,30 ,60 ,90days
    imput:
    custno range
    sales area
    days 30,60,90 selection sort by cust no,sales organization
    output :report program ALV grid format
    Many Thanks in Advance.

    Look at transaction S_ALR_87012178.
    Send the cash to Eric.
    Regards

  • Off topic  :  Tools Toad

    Hi
    Sorry for Off topic, But I would like to know how can I to configure Toad for to show
    Tablespaces when show Script Table and where can I to configure for to show each column in line, because It show as
    CREATE TABLE myscheme.MYTABLE ( VL_TOTAL_PEDIDO_DOLAR NUMBER(15,2), NM_CICLO_ESTATISTICA NUMBER(6), NM_SEMANA_CICLO NUMBER(2), NM_SEMANA_MES NUMBER(2), DT_ESTATISTICA DATE, NM_PEDIDO NUMBER(10) NOT NULL, ID_TIPO_OPERACAO NUMBER(2) NOT NULL, DT_GERACAO_MOVIMENTO DATE NOT NULL, CD_CONSULTORA NUMBER(10) NOT NULL, CD_REGIAO_ESTRATEGICA NUMBER(6) NOT NULL, CD_GERENCIA_VENDA NUMBER(6) NOT NULL, CD_SETOR NUMBER(6) NOT NULL, CD_GERENCIA_VENDA_SEGMENTO_CN NUMBER(6), CD_SETOR_SEGMENTO_CN NUMBER(6), ID_TIPO_CN NUMBER(2) NOT NULL, CD_SEGMENTO_CANAL NUMBER(2) NOT NULL, CD_SEGMENTO_PEDIDO NUMBER(2) NOT NULL, SG_UF CHAR(2 BYTE), CD_CIDADE CHAR(9 BYTE), DT_PEDIDO DATE NOT NULL, NM_CICLO_PEDIDO NUMBER(6) NOT NULL, DT_LIBERACAO_PEDIDO DATE, NM_CICLO_LIBERADO NUMBER(6), QT_PONTOS_PEDIDO NUMBER(10) NOT NULL, QT_ITENS_PEDIDO NUMBER(10) NOT NULL, VL_TOTAL_PEDIDO NUMBER(15,2) NOT NULL, ID_PEDIDO_INICIO NUMBER(2), DT_DIGITACAO DATE, ID_MEIO_CAPTACAO_PEDIDO NUMBER(2), CD_CONSULTORA_RELACIONADA NUMBER(10), ID_CENTRAL_PRESENTE NUMBER(2), CD_REGIAO_ESTRATEGICA_PRECO NUMBER(6), CD_GERENCIA_VENDA_PRECO NUMBER(6), CD_SETOR_PRECO NUMBER(6), CD_TIPO_ESTRUTURA_COMERCIAL NUMBER(4), CD_ESTRUTURA_COMERCIAL NUMBER(6), DT_FATURAMENTO DATE, ID_SITUACAO_PEDIDO NUMBER(3), CD_CENTRO NUMBER(5) ) LOGGING NOCOMPRESS NOCACHE NOPARALLEL MONITORING;

    I think he wants to generate the 'create table' script in TOAD and to have it all on one line as well as include the tablespace name.
    TOAD has too many options and it's probably hidden somewhere in there.
    Message was edited by:
    stellios.k

  • Auto suggest  AJAX component for ADF 10g: source code needed

    Dear all,
    Duncan Mills has posted a very useful article in http://www.oracle.com/technology/products/jdev/tips/mills/ajaxautosuggest/ajaxautosuggest.html about how to incoroporate an AJAX iput text field that can operate like Google search. This components derives from Sun Java blueprints.
    The URL to download the jar of this component is [http://otn.oracle.com/products/jdev/tips/mills/AjaxAutoSuggest/textfield.jar|http://otn.oracle.com/products/jdev/tips/mills/AjaxAutoSuggest/textfield.jar]
    I have managed to incorporate it in my ADF pages, but to my disappointment, this component does not work well with non-english character set.
    I have verified this from a Sun forum thread at [http://forums.sun.com/thread.jspa?threadID=787270&tstart=0|http://forums.sun.com/thread.jspa?threadID=787270&tstart=0]
    The jar file contains only the class files. Does anybody have the source code so I can amend it to work with UTF-8 charactes?
    My email is [email protected]
    Thanks
    Dimitris

    I have tried it, but when I create a tag library out of the Sun bluprint components, all my ADF pages display an error message that the JSF core tag laibraries are not installed

  • Gesture swipe left or right for Coverflow layout source code

    Hi Don Kerr Can You please post gesture swipe left or right for Coverflow layout source code

    I strongly agree and missed the three-finger swipe.  I managed to figure it out, with some searching online and in preferences.  Here's how I got it back.
    1. In the Trackpad Preference, go to the third tab, "More Gestures".
    2. Mouse over "Swipe between full-screen apps".  It will show a short demo video.
    3. Just below, where it says "Swipe left or right with three fingers" you can click to change the shortcut.  Change it to "Swipe left or right with four fingers".
    4. Mouse up to "Swipe between pages".  Change its shortcut to "Swipe left or right with three fingers".
    5. Rock and roll.
    FYI, the default seems to be "Scroll left or right with two fingers".  That invokes an animation, and uses Apple's new "natural" scrolling direction.  To me, it's not natural, because then I move my fingers backwards (to the left) to go forwards in my history.

  • Please, tool for automatic java source conversion?

    Hi,
    Apart from Sun's jilkit, do you know a software a software that could take the
    first java source below as input and automatically produce:
         1) a converted java source file similar to the second file below;
         2) resource files (e.g. mess.properties, mess_es_MX.properties, mess_fr_CA.properties) .
    We know that Sun's jilkit does this but we tried it and it is buggy and
    Sun no more supports it.
    // INPUT FILE
    import java.util.*;
    public class Test
    public static void main(String args[])
    System.out.println("Hello world!");
    System.out.println("You must Walk from " + args[0] + " to " + args[1] + "Km");
    // OUTPUT FILE, we want this done automatically
    import java.util.*;
    public class Test
    public static ResourceBundle resourceBundle = ResourceBundle.getBundle("messages");
    public static void main(String args[])
    System.out.println(resourceBundle.getString("Hello world!"));
    System.out.println(
    java.text.MessageFormat.format(
    resourceBundle.getString("Walk from {0} to {1}Km"),
    new String[]{"" + args[0], "" + args[1]}
    }

    The javadoc tool has no such capability. I believe some IDEs have
    this, but don't know which ones. You could also look at these places:
    http://java.sun.com/j2se/javadoc/faq/#docletsfromthirdparties
    http://doclet.com
    If you find a good tool, you might mention it here for others.
    cheers,
    -Doug

  • Off topic: Substitutes for "Enterprise Architect" on Linux?

    I really like Enterprise Architect, but don't really relish installing Crossover Office and the 1001 Abominations that are required to support EA under Linux - yet I'm mostly developing in a Linux environment these days.
    Can anyone recommend a Linux-compatible product - free or commercial - that's in the same league as EA, particularly for building ER diagrams?
    I know this isn't technically a Java question, but perhaps there's a Java based product that fits the bill.

    dcminter wrote:
    I can always get by with a notepad and a fountain pen; I tended to use EA for its reverse engineering capabilities; I worked on one project where the project managers insisted we document the whole system by using Together to reverse engineer class diagrams and sequence diagrams from the Java code using Together. The class diagrams were not bad bu the sequence diagrams had so much irrelevant detail that they were unusable.
    the ER diagrams made good aides memoires, made it easy to spot silly mistakes in the DB design, and are great for communicating about the DB design, but I rarely use them up front.I don't do much complex BD design - I rely on people who know what they are doing.
    >
    I think Canonical's the best thing that's happened to Linux (even if it does keep reverting my Java config to GCJ (spit) for its own mysterious reasons). I've used various flavours of Linux for years, but gave it up on the desktop because it was too painful to maintain. Finally it's become easier to manage a Linux desktop than a Microsoft one!
    It'll be really interesting to see if people start porting these significant developer applications to Linux, or if decent dedicated replacements will spring up to replace them - or if this is just a blip before Linux gets trampled by its commercial rivals.I would like to change my Wife's computer from Windows XP to Ubuntu but I don't think it's quite there yet. Very close but still a little way to go.
    Edited by: sabre150 on Jan 5, 2008 4:00 PM

  • Java development tool for optimalization of the code

    I'm searching for a program, that would detect not used variables, methods, etc. in Java code. Can you help me to find such?

    Why do you want a program to cover up poor program design?
    The best solution to your problem is: don't declare variables you don't use, and don't write methods you don't use.
    Additionally, you shouldn't copy and paste other code. If you must, read other people's code to get a good idea of how it works, then do it for yourself, if not just for the sake of keeping organized and not having any unused stuff.
    As far as speed optimization goes (I know that's not what your question was about, but, for your information), you can compile with the -O option to take care of that. If you are worried about class file size, you can compile with the -g:none option to remove debugging information.
    Jason

  • Slightly off-topic: app for ripping dvd of film in public domain

    Hi
    I want to use a few snippets of a film in the public domain, The Green Promise, in a music video for this flick I'm working on.
    Archive.org, where I can download it, only has what they call a 512kb.mpeg4 version (I take it an mpeg4 export of a 512kb version). Youtube's version must be from that too cause full screen it looks just as cruddy.
    I see where I can get the dvd from Amazon. You'd think that would be superior quality, no? If so, any app you would recommend to use to 'rip' it? One where I can rip segments instead of the whole would be best.
    best
    elmer

    If it's non-protected, MPEG Streamclip will do the job and will allow saving to your choice of codecs. Streamclip is free, but you will need to purchase the QuickTime  MPEG2 Playback component from Apple ($20). Follow the instructions on the Squared 5 site for this.
    Handbrake is an alternative, which I have not used in several years. As I recall, it outputs either an H.264 or X.264 file.
    Russ    

  • Off topic:  Resultset  for to Java

    Hi
    How can I return resultset to Java ?
    How many ways is there ?
    Where can I to find examples (Oracle/Java )
    thank you in advance

    How can I return resultset to Java ?by ref cursor
    Where can I to find examples (Oracle/Java )http://download.oracle.com/docs/cd/B19306_01/java.102/b14355/oraint.htm#i1058743

  • Is there an tool for automatic re-indent source code ?

    Hi
    Where could i found an Tool for automatically indenting source code ?
    Regards
    Philippe

    Jdev can do this as well. Select the class you want to re-indent in application navigator, and select Reformat (or use shortcut Ctrl-Alt-L). Your code is re-indented and formated according to code-style defined in preferences.

  • Wanted: Sample source code for voice recorder

    I've been google searching for some sample source code to implement a voice recorder on my AudioVox 5600. I would like to learn how to read from the microphone and write to my SD card in a standard file format like wav, wma or mp3.
    Can anyone help me understand how to do this?
    Thanks,
    Siegfried

    Basic would be ;
    RESULT_FIELDS -xxx = <SOURCE_FIELDS> -xxx
    you have the source fields as source, and result fields for as the target. In between you can check some conditions as in other routines of transformation.
    BEGIN OF tys_SC_1, shows your source fields ( in your case DSO chars and key figures)
    BEGIN OF tys_TG_1, , shows your result fields ( in your case Cube characteristics)
    Hope this helps
    Derya

Maybe you are looking for