Offcycle run and stopping the bank transfer for one employee

Hi,
Please help with a soultion....
Jan 25th 2011- OFFCYCLE RUN 
Jan 26th 2011 u2013 OFFCYCLE RUN .Bank Transfer
Jan 26th 2011 u2013 Realised that no need to pay one additional bonus for one employee.
                          Stop payment for one employee .Amount (1000 $) in IT0267 dated on  25th Jan 2010.
How to correct the payroll / How to adjust this amount? (Client donu2019t want to DELETE PY CULSTER)
Pls note the following:-
1) If I am running a correction done with -1000 $ amount in IT0267 with a different date then system generate a /561 for the next run. (Feb payroll run).Then it will deduct from the actual salary.
2) If I am deleting IT267 and rerun the offcycle then correction is not happening.

Hi,
For correcting this problem, 2 ways are-
1. Delete 267 entry and during next regular run system will take care accordingly means system will adjust /411, /418, /460 and obviously the net payment.
2. Another way is to run off-cycle type 'B'. See note : 431473
Regds.
Suman

Similar Messages

  • I accidentally paid for 2 photoshop products and now i have two same products i need one of them to be canceled and get the payment back for one of them

    I accidentally ordered two same products and need one of them to be canceled and i need to get the payment back. Thanks

    This is an open forum, not Adobe support... You need Adobe support to cancel a subscription
    -cancel http://helpx.adobe.com/x-productkb/policy-pricing/return-cancel-or-change-order.html
    -or http://helpx.adobe.com/x-productkb/policy-pricing/cancel-membership-subscription.html
    -or by telephone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

  • How to check RBS maintainer is running or not and how to stop the RBS maintainer for a specific content db.

    HI
    how to check RBS maintainer is running after deleting orphan blobs and  while deleting the blobs from rbs storage,
    and also how to stop the RBS maintainer for a specific content db.
    when I run below query  I found the orphancleanup value true
    SELECT [config_key],[config_value] FROM [mssqlrbs_resources].[rbs_internal_config]
    where config_key='orphan_cleanup_in_progress'
    adil

    HI
    the  RBS maintainer was run from one of web front end server  And for one content database , that fine
    but I  now know this information only this did by other administrators.
    Now I did not found this Maintainer running in windows task scheduler, but blobs are decreasing from content database RBS storage folder, and　 also I found this maintainer running I checked from  when　 run sql queriy in 　sql
    server
    SELECT
    [config_key],[config_value]
    FROM
    [mssqlrbs_resources].[rbs_internal_config]
    where
    config_key='orphan_cleanup_in_progress’
    it 　given me true
    here now  I want to stop this orphan cleane up , what settings and script I will run?
    adil

  • Is it possible to create run and stop button on the control pannel instead fo using the ones on the tool bar?

    I have created a program which runs to all my specifications. The final thing I'd like to do is to be able to run it from the contrl panel.
    Can i create a run and stop button on the control panel or am i limited to using the little white arrow button on the toolbar?

    When you say Control Panel are you referring to the Front Panel of your VI?  If so then yes you can have the program start automatically upon being opened and close with a button push on the Front Panel.  Let me know if this is what you were looking for.
    CLA, CLED, CTD,CPI, LabVIEW Champion
    Platinum Alliance Partner
    Senior Engineer
    Using LV 2013, 2012
    Don't forget Kudos for Good Answers, and Mark a solution if your problem is solved.

  • I recently purchased the new nano (7th generation) and I love it except for one issue.  On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the e

    I recently purchased the new nano (7th generation) and I love it except for one issue.  On my old 2nd generation nano, when I played podcasts, it would play podcasts one at a time. So if I had 20 episodes of a podcast on the device, it would stop at the end of each one.
    With the new nano, I can select and play a podcast, but when it’s over, it goes straight to the next one without prompting.  It keeps on playing all of the episodes of any podcast until you stop it manually.  Setting the repeat function differently does not prevent episodes from being played automatically.
    This can be very irritating when I only want to listen to one podcast.  I’ve often fallen asleep listening to one episode of a podcast, only to be woken up hours later by the iPod working its way through all subsequent episodes.  It is also annoying that any podcast which has started automatically in this way is marked as ‘played’ – even if you stop it within a few seconds.  This makes it hard to keep track of what you have actually listened to.
    Is there any way to set the iPod to play all the podcasts individually? I have read the User Guide from cover to cover, and can’t find a way of doing this.
    MD

    Dude or hot-spur,
    Not fishy at all!!!! You really think I would have taken any more of my time to post a bogus rant? We'll no, it is unfortunately all true. I want to hear from anyone who is experiencing such problems not anyone else that wants to put there two cents in. I really don't need anymore hate or negativity. Just people's experiences because I feel like I am the only one having so many problems. Thank you
    Yes, I have had some unfortunate bad luck to have so many problems at the same time, but some of them are just things you cannot do on the new OS.
    Thank you again

  • Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook and wiping the hard drive for a complete reset.

    Can I install Mac OS X 10.5 on a Powerbook G4 already running Mac OS X 10.6? I lost my disc of 10.6 and can only find my 10.5 disc as I'm selling my MacBook, and wiping the hard drive for a complete reset.

    A PowerBook G4 can't run Snow Leopard OS 10.6, however, it can run Leopard OS 10.5. But you must use a retail (black) Leopard install DVD.
    What does the selling of your MacBook have to do with installing Leopard on your PowerBook?
     Cheers, Tom

  • Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

    Every time I sign into my Macbook, I get an error message from Automator; "The data couldn't be read because it has been corrupted.". I have never created an Automator workflow. How do I find out what Automator is trying to run and stop it?

    Maybe it's set as a login item:
    - System Preferences: Users and Groups:
    - Highlight your user account in the left pane/list
    - Click "Login" tab at the top.
    See if you have an Automater action on the list
    - Note, you can select it, then right-click, and can then select "Reveal in Finder". That way you might have an idea what installed it.

  • I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions.  Can you tell me how please?

    I want to maintain Safari 10.6.8 on my computer and then install Maverick on a separate internal drive so I can run new FCPX software and maintain the older OS for my older software versions.  Can you tell me how please?
    I see an upgrade path from Safari but don't want to change that and would like to be able boot from Maverick when needed.
    Is this possible and how?
    Thank you!

    On the Apple site I see an upgrade path but not from scratch.  I will use my current systems and then it place a complete install of Maverick on the other drive to boot from?
    Thank you!

  • I have working Netgear network. Want to add new Time Capsule and run 2nd network for new apple TV and Imac, and keep the netgear network for my PC and Canon printer.

    I have working Netgear N600 dual band router network. The existing network has an XP netbook PC, canon printer, 2 Iphones, Epson Air printer, an Ipad, 3 roku boxes, backup drive. Just bought a new Apple TV box, and time capsule 2T.  I have an IMac on order but don't have it here yet.
    My goal is to add new Time Capsule and create 2nd "apple" network for new apple TV, Iphones, Ipad, Epson Air printer and new Imac, and keep the netgear network for my PC, Roku TV boxes, and Canon printer and backup drive.
    The Netgear router, the time capsule and new IMac will be on the same desktop, I dont need to backup my netbook PC to time capsule.
    Where do I start?
    Which device connects to my modem first, the TC2 or the Netgear?
    Is it best wait for the Imac before starting or can the TC2 be set up from my Ipad or PC?
    Thanks.

    It is pretty simple..
    Setup the TC in bridge and plug it into the Netgear.. I would leave the netgear as the main router for now, although in the future you can swap things around. The netgear firmware may have issues with bonjour and airplay/airprint?? Does your ipad print ok now?
    You can setup the TC using Mac, PC (at least up to win7) or iOS.. they all have airport utility available.
    Bridge mode is set differently depending on the version of the utility. This is v5 and how the windows one will look (at least similar to).
    v6 will be as
    With the TC in bridge you will still create a wireless network.. and give it a different name from the netgear.. then all the apple devices can connect to it. Use ethernet rather than wireless if the imac is on the desktop with it. Much faster and better for using Time Machine backups.
    If you run into any issues.. just post the particular issue. It will take a bit of getting used to, but isn't hard.

  • HT3576 When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    When I pull the notification screen down after about 5 seconds the screen goes black and then the apple appears for about 30 seconds and then returns to the home screen, this is an iPhone 4 running ios7 , any ideas??

    One problem though, the top button on my phone is jammed so i cant power off the phone, anyway of resetting the phone without using the top button ?

  • I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

    I charged my ipad with a defective charger, it heated up and stopped working. i charged for a good 4 hours without knowing the charger was defected (distortion of internal wires and a broken protective external layer)

    You're not asking any question so I'll just ramble.
    You may have permanently damaged your iPad.  The iPad controls the current coming from the charger but the charger electronics must be capable of responding to the iPad.  Charge with a known good charger and then test your iPad.  If it's OK, you lucked out.  Otherwise...  If the charger was not an Apple charger, you're completely out of luck.  If it was an Apple charger, call Apple and discuss the issue with them.

  • NI VISA TekTronix RSA3408A "Free Run" and "Stop" Commands?

    Hello
    Is anybody clued up on the "FREE RUN" and "STOP" commands for TekTronix devices? Particularly the RSA3408A, if not, I'll try anything.
    Thank you in advance!

    well, Have you read the manual for that device?
    Tektronics (for some reason) requires you to register to download the manual I'll leave that to you I get enough spam from Tek
    http://www.tek.com/spectrum-analyzers/rsa3000/rsa3​303b-manual/rsa3000b-series
    Jeff

  • (Cisco Historical Reporting / HRC ) All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054

    Hi All,
    I am getting an error message "All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054"  when trying to log into HRC (This user has the reporting capabilities) . I checked the log files this is what i found out 
    The log file stated that there were ongoing connections of HRC with the CCX  (I am sure there isn't any active login to HRC)
    || When you tried to login the following error was being displayed because the maximum number of connections were reached for the server .  We can see that a total number of 5 connections have been configured . ||
    1: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Current number of connections (5) from historical Clients/Scheduler to 'CRA_DATABASE' database exceeded the maximum number of possible connections (5).Check with your administrator about changing this limit on server (wfengine.properties), however this might impact server performance.
    || Below we can see all 5 connections being used up . ||
    2: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:[DB Connections From Clients (count=5)]|[(#1) 'username'='uccxhrc','hostname'='3SK5FS1.ucsfmedicalcenter.org']|[(#2) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#3) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#4) 'username'='uccxhrc','hostname'='PFS-HHXDGX1.ucsfmedicalcenter.org']|[(#5) 'username'='uccxhrc','hostname'='47BMMM1.ucsfmedicalcenter.org']
    || Once the maximum number of connection was reached it threw an error . ||
    3: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Number of max connection to 'CRA_DATABASE' database was reached! Connection could not be established.
    4: 6/20/2014 9:13:49 AM %CHC-LOG_SUBFAC-3-UNK:Database connection to 'CRA_DATABASE' failed due to (All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054.)
    Current exact UCCX Version 9.0.2.11001-24
    Current CUCM Version 8.6.2.23900-10
    Business impact  Not Critical
    Exact error message  All available connections to database server are in use by other client machines. Please try again later and check the log file for error 5054
    What is the OS version of the PC you are running  and is it physical machine or virtual machine that is running the HRC client ..
    OS Version Windows 7 Home Premium  64 bit and it’s a physical machine.
    . The Max DB Connections for Report Client Sessions is set to 5 for each servers (There are two servers). The no of HR Sessions is set to 10.
    I wanted to know if there is a way to find the HRC sessions active now and terminate the one or more or all of that sessions from the server end ? 

    We have had this "PRX5" problem with Exchange 2013 since the RTM version.  We recently applied CU3, and it did not correct the problem.  We have seen this problem on every Exchange 2013 we manage.  They are all installations where all roles
    are installed on the same Windows server, and in our case, they are all Windows virtual machines using Windows 2012 Hyper-V.
    We have tried all the "this fixed it for me" solutions regarding DNS, network cards, host file entries and so forth.  None of those "solutions" made any difference whatsoever.  The occurrence of the temporary error PRX5 seems totally random. 
    About 2 out of 20 incoming mail test by Microsoft Connectivity Analyzer fail with this PRX5 error.
    Most people don't ever notice the issue because remote mail servers retry the connection later.  However, telephone voice mail systems that forward voice message files to email, or other such applications such as your scanner, often don't retry and
    simply fail.  Our phone system actually disables all further attempts to send voice mail to a particular user if the PRX5 error is returned when the email is sent by the phone system.
    Is Microsoft totally oblivious to this problem?
    PRX5 is a serious issue that needs an Exchange team resolution, or at least an acknowledgement that the problem actually does exist and has negative consequences for proper mail flow.
    JSB

  • How do I set a default to never allow access to my contacts and stop the popup requests on every website?

    Since last few Nightly updates, I am getting one or more (one site had 5 domains) popup requests similar to "Allow ad.doubleclick.net to access your contacts? [] Don't ask for this site again. Allow access Don't allow access .... This is getting really annoying. If you are going to add this capability to Firefox, please add a default config setting to always deny access and stop the popups.

    It is in the process of being disabled. It will likely be some time next week before the code will be reverted.

  • Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error, so you can load Firefox again.

    Whenever you try to save a PDF file to a location other than the default location ('My Documents'), Firefox freezes & you have to go to the 'Task Manager' to exit Firefox and stop the error. I have Windows XP (Media Center Edition) and all updates (Firefox, Adobe PDF, Microsoft, virus protection, etc) are installed. This has only been a problem since Firefox 4, and isn't a problem in Internet Explorer.

    Hi David,
    Thank you for your detailed question. It sounds like the real issue is pdf files. Are there any antivirus/firewalls that might be blocking this specific file type? or are there any preferences in your control panel that might be blocking this?
    Do you have any stored preferences for PDF files in Firefox?
    *[[Applications panel - Set how Firefox handles different types of files]]

Maybe you are looking for