Offering the SAVE AS dialog box- No ability to just SAVE.

I've posted about this before and have not gotten an answer. Why - when I try to save my cs6 file - is it only . it happens whether I just press the command/s or if i use the File > Save menu.
Something is wrong here and it's creepy. Can anyone help me figure out what this bug is about?
Many thanks.

Have you checked privileges for the file/the folder/the disk?

Similar Messages

  • Change GMT time and 12 hours format in the Callback Properties dialog box

    Hello! There are CAD 7.6.3 for UCCE. In the Callback Properties dialog box for personal CallBack displays the Customer's Current Time in GMT 0 and the data format of 12 hours.
    How to display in this window, the time is GMT +3 and change time in 24-hours format?

    Hi,
    Please check your local time format settings by the following steps:
    1. Click the Time in the right bottom corner taskbar.
    2. Click Change date and time settings.
    3. In Date and Time window, click Change data and time.
    4. In Date and Time Settings window, click Change calendar settings.
    5. In Customize Format window, switch to Time tab.
    6. Change the Short time format as H:mm instead of h:mm tt, set the Long time as H:mm:ss.
    7. Click OK to save the setting to have a try.
    Regards,
    Winnie Liang
    TechNet Community Support

  • When I hit the escape key to close out the open file dialog box, firefox hangs or crashes.

    When I open the "open file" dialog box using the ctrl+O and then hit the escape key to exit the box, I get an error message which I'm not able to paste here.
    it says something about a runtime problem and if I try the same thing again to reproduce the problem, it will sometimes just hang and windows vista will tell me the program is not responding.
    I've checked to see if there are any crash IDs but none were found for this time frame.
    I have even disabled all add ons.
    I'm currently using vista 64 bit edition and Firefox 6, beta edition.

    Hi,
    Please also try right-clicking on the link corresponding to the language version and '''Save Target As''' to save the Firefox installer. If the problem persists, posting [http://answers.microsoft.com/ here] would also be helpful.
    [https://www.mozilla.org/en-US/firefox/all.html Firefox Latest]

  • Urgent!!how to open the file download dialog box????

    Hi all,
    i'm using the browse button for the user to select the file
    and a submit button, which when cliked should open the file
    download dialog box asking for open or save.
    i searched for so many forums and websites and didn't get the
    solution yet.
    i'm using jsp.
    anyone have the jsp code for the same????
    will b more helpful if u send it to me.
    thanx in advance.

    Hi
    Use the Filedialog class.
    Let your button call a method wich contains the following Java code:
    FileDialog filedialog =
    new FileDialog( Frame1.this, "Open a File", FileDialog.LOAD );
    //witch calls this constructor: public FileDialog(Frame parent, String title, int mode)
    //use Filedialog.SAVE to save a file.
    filedialog.show();
    String filename = filedialog.getFile();//to display the name of the file
    String directoryname = filedialog.getDirectory();// to display the directory name

  • How to disabled the input parameter dialog box in crystal reports 9

    Post Author: Murtaza
    CA Forum: General
    Hi friends,I have got stuck with a weird problem.  In my
    crystal report, I have set up some input parameters.  I am setting
    values for these parameters somewhere inside code.  But I don't
    want to show the default input parameter dialog box. Under any case,
    user should not see the ugly parameter dialog box that crystal
    presents.   Please suggest me how I can achieve
    this.  I cannot do this through code, because our environment does
    not allow that.  I have to do this in crystal reports viewer and
    by setting some property of the crystal report object. But everything
    must be done on UI, not through code. So, the solution should not be the following. 
    // step before step 1
    // **** the line needs to refer to the report and be set before setting
    ReportSource in the viewer to myReport
    myReport.EnableParameterPrompting = False
    Any help would be greatly appreciated.  Murtaza

    Post Author: sleahcim
    CA Forum: General
    Hi Murtaza,
    Unfortunately, I am not aware of any method to suppress the prompt for the input parameters, but still use them.  It is truly a design-related issue for the report.  The reason that the prompt appears is because the parameter it is prompting for is used in the report; in particular either the Group or Record Selection, or referenced in another formula.
    The only way I can think of to not show the prompt, is to not use the parameter in the report.  You did mention that you are setting the value of the parameter inside of the report -- are you doing this through using a formula?  Perhaps you can just remove the parameter and only use the formula that you are setting the default values with.
    -Michael

  • Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'

    Excel is throwing error when it click print : 'No printers are installed. To install a printer click the File tab, and then click Print. Click No Printers Installed, and then click Add Printer. Follow the instructions in the Add Printer dialog box'
    Word, and powerpoint application are working fine.  
    Environment :  Windows 7 64-bit, MS Office 2013 64-bit
    Steps to recreate
    (i)  Create new user account and add to any group ( do not log on using this
     account)
      (ii)  runas /user:<new user account>  <fullpath>\excel.exe
       it will ask password so enter on command prompt
    (iii)  open any excel document  and click File->Print
      (iv)  verify result  (it is failing) it pop ups below error
     Error:`Microsoft Excel
     No printers are installed. To install a printer click the File tab, and then click
     Print. Click No Printers Installed, and then click Add Printer. Follow the
     instructions in the Add Printer dialog box.                                                                                                               

    Sorry for late reply i was not at work
    I have a default set excel is still throwing error. Interestingly winword , powerpoint and publisher are working fine. I am able to print from all office applications except Excel.
     Probably excel behaves differently from other office applications.
     Probably it is a bug in excel
    Workaround : Log on to a system once using newly created account then runas excel using this account then print works fine.
    It means something in user profile should be configure to run excel print operation. Could you please somebody help what I need to configure in user profile that makes print operation success?

  • Change File Name In The "File Download" Dialog Box For Web Reports

    Hi All ,
    I followed the below note to change the "File Download" name.
    How To Change The File Name In The "File Download" Dialog Box For Web Reports? Doc ID: Note:418366.1
    However its not working. Has anyone tried this and works fine ?
    Basically I wanted to change the name "rwservlet" when a report is run in an
    excel format.
    Rajesh Alex
    Rajesh Alex

    Hello,
    Have you checked if a HTTP header "Content-disposition" is returned ?
    You can use ieHTTPHEaders for IE
    http://www.blunck.se/iehttpheaders/iehttpheaders.html
    and
    Live HTTP Headers for FireFox
    https://addons.mozilla.org/en-US/firefox/addon/3829
    Regards

  • How to avoid the Commit/Rollback dialog box

    I've a JClient app with two frames wich relate to the same appllication module with the same connection (I need it because I want a single commit).
    I start the first frame,then I click a button to start the second frame, I insert data in the second one and I see the commit/rollback buttons in both navebars enabled.
    When I close the secod frame, without committing (because I want to commit at the end of the whole process) I receive the Commit/Rollback dialog box.
    How can I solve that problem ?
    TIA
    Tullio

    Remove or conditionalize the code in generated Form/Frame.java class that binds a WindowListener to the Frame like:
        addWindowListener(new WindowAdapter()
            public void windowClosing(WindowEvent e)
              _popupTransactionDialog();
              JUApplication juApp = panelBinding.getApplication();
              if (juApp != null)
                juApp.release();
              System.exit(0);
      }You may either conditionlize the above windowClosing method or the code in generated method
    private void _popupTransactionDialog()

  • FF 7.0.1 on Mac OSX 10.6.8: I sometimes get the "unresponsive script" dialog box in the top left corner of the screen, so far out that I can see only the bottom right corner of the dialog box. Is there any way of re-centring it?

    FF 7.0.1 on MacOSX 10.6.8 (not this machine!): I sometimes get the "unresponsive script" dialog box jammed into the top left corner of the screen so that only a quarter of it is visible.
    Is there a way of re-centring the dialog box (in particular, when its top edge is off the screen)?
    Thanks!

    There is no way to preserve view preferences.Just remember or annotate the zoom % used in the package.
    You may want to open an MS Connect item asking to add such a feature.
    I can tell you it may not be implemented because a package may be opened on different size monitors.
    Arthur My Blog

  • Should the web page address be included in the file name in the meta data dialog box?

    In the page properties > meta data > below is a field with the label file name: (the the area to type in the field), after the field, it is labeled .html.
    I have 2 questions here.
    1. If I type in http//:www (my page url), do I include .html at the end? I didn't know if this is automatically added because it is off to the side of the field?
    2. If I type in the entire URL address: http//:www (etc, etc).html,    after closing the page properties dialog box, I make it a habit to double check my work. What happens is the http//:www.xxx changes to (htttpwww.xxx). It drops the //: on the URL.
    So would it be better to just type in www.xxx (without the http//:www.xxx)
    and do you type in the .html at the end?
    I am assuming this will help with SEO page ranking or at least makes it easier for the search engines to crawl your site??
    I hope this makes sense.
    Advise would be very helpful.
    Ben

    You are absolutely correct with the URL Ben. Taking your above example, you just need to type in "Services" in the file name and the webpage will be exported as services.html and the URl will be  www.xyz.com/services.html.
    All the webpages (be it parent page or child page) gets physically saved at the root directory of your website on the server (where your website resides).
    This name is just the name of the file using which it is physically stored and called from the server. It does not help search Engines to crawl deeper inside the website.
    As I explained, "name which you wants the .html file to be stored with" here means the name of the physical file which is getting saved on the server.
    Most users leave the file name same as Page name. If you have it different from page name then this will be the workflow :
    Page Name : About
    File Name : test
    domain : www.mysite.com
    Now if you are  using a Menu Widget, it will list "About" in the Menu. And when end user will click on "About" then it will call the file named "test.html" from the server location (where all the files of your website are stored).
    And it will open a page with address "www.mysite.com/test.html"
    Hope I am able to explain the concept of File Name here. Please let us know if you have further queries on this.
    Regards,
    Sachin

  • How do I get back to the newest file dialog box style in LabVIEW?

    I have LabVIEW 7.1 and LabVIEW 6.0.2 installed on the same machine.  When I doubleclick a .vi file it tries to open in LV602.  Of course, if it is a LV71 VI I get an error and it doesn't open.  Then I run LV71 and load the desired VI--in this case by using the Open arrow to find it in the "recently opened" list.  Now, I've made this mistake before, especially when I don't remember whether I used LV602 or LV71 to create the VI, and nothing bad has happened.
    But this time something undesirable did happen:  all Open File dialog boxes are of the old funky style.  How do I get the file dialog boxes back that I've grown used to seeing when I use LV71?
    CLUES:
    1.  I get the old style dialog box even when I try to open a VI--not just when a running VI invokes it.
    2.  The built version of the VI brings up the correct, new style, file dialog box--unlike the development environment.
    I haven't found any settings in the options area that would appear to affect the file dialog box style.  Has anyone ever seen anything like this?

    RudyRed wrote:
    Thanks for the response,
    Warren.  I think all my problems with LV versions coexisting
    peacefully have been related to NIDAQ--and I think the workaround (for
    supporting the different levels of LV DAQ VIs--see my response to
    Benoit, above) shows that it is not NECESSARY for NI to orphan old LV
    versions' DAQ functionality on the development computer, though it is
    still painful to be able to have only one version of NIDAQ available on
    a given target computer.  It's probably a marketting decision
    meant to encourage users to stay on the straight-and-narrow upgrade
    path.
    NI-DAQ has usually been working fine in
    several different installed LabVIEW versions on my computer. What is
    important is the order of installation. Start first with the lowest
    LabVIEW version and install the latest NI-DAQ that supports that
    LabVIEW version. Then go to the next LabVIEW version and install again
    the latest NI-DAQ version that supported this LabVIEW version and so
    on. I'm regularly working with 6.1 up to 7.1 and starting with 8.0
    slowly and haven't had real show stoppers yet.
    Rolf Kalbermatter
    Rolf Kalbermatter
    CIT Engineering Netherlands
    a division of Test & Measurement Solutions

  • When I use the command "Place in photoshop" CC from Bridge CC, it skips the Camera Raw Dialog box

    I am having an issue when I use the "Place in Photoshop" command from within Bridge CC, it is skipping the Camera Raw Dialog box and not behaving like a normal smart object. This has been my workflow for years and suddenly it's not working in CC. Anyone have any advice? Thanks!

    As far as i can tell, if you use Place>In Photoshop from Bridge with a camera raw file and don't have any other documents open, it skips the camera raw dialog, but does place (open as a smart object)
    and then you can double click on the smart object icon on the thumbnail in the l;ayers panel to open camera raw.
    If you already have a document open then Place>In Photoshop using a camera raw file opens the camera raw dialog before placing the photo.
    Also check the photoshop>Preferences>General and verify you have Place or Drag Raster Images as Smart Objects checked.
    The above behaviour seems to be the same in photoshop cc as past versions of photoshop, at least on the windows versions.

  • Enable "scrolling preview" behind the Crop Pages dialog box in Acrobat 9 ?

    Hi everyone,
    I want to be able to preview the crop marks (when you click on "Document" and choose "Crop Pages" or Shift+Ctrl+T) before actually cropping all the pages of my documents. When the crop tool dialog box is showing, you can see behind it the crop marks that look like guides. In Acrobat 5, you could scroll the pages even with the crop tool box showing in front of your pages. This way, you could see the crop marks or "guides" on all the pages. But, in version 9, when the crop box is showing, you can only see the crop marks on the page(s) you're working on. You can't scroll behind the box to see what the others pages look like with the crop marks. I've uploaded print screens to make myself a bit more clear (Acrobat 5 vs Acrobat 9) :
    http://localhostr.com/files/0484a8/acro5vs9_crop.png
    If someone knows a way to get the crop preview scrolling back, maybe with a plugin or Javascript, please let me know ! 
    Thank you all for your help. 
    Paul B.

    Can somebody please help me? Nothing I do seems to open up the "crop dialog box".
    I start with Edit > Edit Text & Images. Then, I click the crop symbol, and set the ranges of my desired crop. Then I want to apply this crop, but nothing works.
    I've tried:
         - Double Clicking Inside the selected crop-box
         - Double Clicking Outside the selected crop-box
         - Triple Clicking
         - Quadruple Clicking
         - CTRL-SHIFT-T
         - Hitting Enter
         - Right clicking
         - Searching endlessly for some sort of button pertaining to "apply crop", to no avail.
         - Changing to different PDF type (scanned, instead of text-to-pdf) and trying again
         - Yelling
         - Punching
         - Crying
    None of the afforementioned seems to work.
    Help please?

  • I'm using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer  In the Print Settings dialog box, I can't select Color, Advanced BW or Grayscale unless I select "Printer Manages Color". The pull down menu is grayed out. Even with "pr

    I’m using an iMac running Os X Yosemite, Photoshop CS5 Extended, R2880 Epson printer  In the Print Settings dialog box, I can’t select Color, Advanced BW or Grayscale unless I select “Printer Manages Color”. The pull down menu is grayed out. Even with “printer manages color” the tif or jpg image comes out in color overlaid with black. (See example - printer1. image on left is close to what it should be). Photoshop has no updates pending. I’ve downloaded the latest Epson driver which was working fine just before the problem occurred

    Is your Photoshop CS5 updated to 12.1?
    Are you on Yosemite 10.10.1 or Yosemite 10.10.2?
    Did you apply the recent Epson software 2.1.9 update?
    What type of file is it (file format)?  What bit depth and what color space?
    BOILERPLATE TEXT:
    Note that this is boilerplate text.
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CS6", but something like CS6v.13.0.6) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    a screen shot of your settings or of the image could be very helpful too.
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • How do I change the dimensions of an image? The Image Size dialog box will not allow me to change it

    How do I change the dimensions of an image? The Image Size dialog box will not allow me to change dimensions.  I am taking an online class and the Image Size dialog box looks different than the one I am seeing in Photoshop CC.  It has the option to change the dimensions.

    When you say chage the dimentions, do you mean crop the image and adjust the size of the image at the same time, or do you mean you want to just resize the image?  Can you post a screen shot of what you're trying to do?

Maybe you are looking for