Offers not to leave BT

I am looking to leave BT when my current broadband contract ends in Mar 2011. Although my special offer broadband package cost of £15.45pm is reasonable - I can still get a simiilar package cheaper elsewhere - and more importantly - the current landline cost is about £6 cheaper elsewhere. I know about the BT advanced payment line saver deal but I resent having to pay 18 months in advance for something I can get for the same price elsewhere. I am interested to know if BT have any special offers on broadband/phone lines that might make me re-consider leaving next March.

Threaten to leave, and you will find out. Best to enquire about three months before your contract expires. The sales people will try to make you an offer you cannot refuse.
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

Similar Messages

  • HT4796 Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

    Hi, I've just bought a new Macbook Pro and started migrating from PC but the remaining time is about 70 hours long, I just wanted to know if that timing is normal and if not, does leaving running my MacBook that time can affect it?

    70 hours...  no, it's not normal but it can't hurt your Mac to be running for that amount of time.
    Try this support article > OS X Mavericks: Transfer your info from a PC

  • A digital copy redeem code says "this code is for an offer not yet available"?

    A digital copy redeem code for a movie says "this code is for an offer not yet available".
    I just purchased the movie and the code is from the insert.

    According to this list:
    http://forum.blu-ray.com/showthread.php?t=122431
    the digital copy offer for Zombieland expired in February of last year, at least in the US. This is a scam being run by the movie studios; they advertise digital copies on the Blu-Ray and DVD disks they sell, but don't tell you up front that they're redeemable only for a limited time after the movie is first released. You'll need to contact customer support for Sony Pictures and hammer on them:
    http://www.sonypictures.com/homevideo/digitalcopy/support_01.html
    Regards.

  • Skype Subscriptions offers not working. Help ASAP

    I'm a new customer whos trying to get the special offer of $4.99 for a skype premiun package but whenever I try to but the product is asking me for $8.99 a month. HELP 

    Hello and welcome to the Skype Community.
    This site appears to be working normally:
    http://www.skype.com/en/rates/
    TIME ZONE - US EASTERN. LOCATION - PHILADELPHIA, PA, USA.
    I recommend that you always run the latest Skype version: Windows & Mac
    If my advice helped to fix your issue please mark it as a solution to help others.
    Please note that I generally don't respond to unsolicited Private Messages. Thank you.

  • Special offers, not showing same price on Buy Now

    I have been interested in trying a Skype phone and noticed the RTX4088 in the Special Offers section as being 15% off, marked down from $117.49 to $99.87. But, when I click on Buy now, it takes me to a cart page and the price jumps to $146.86 marked down to $117.49. What gives? Skype, any help here? I wondered if it was a currency difference, but the item shows a big C next to it on the Special Offers page, that seems to match up with Canadian, as I am from Canada. And on the Buy now page it has a big C as well. So, I can't see that the currency is switching. Something doesn't seem right here with price differences, but I'm not sure what the answer is.

    I don't believe Skype controls the prices merchants post.  I can't verify what you are seeing from my location but I can tell you I've seen price discrepancies before.  Generally I see the lowest prices by the Chat and Vision merchant.  You can also buy from alternate merchants that are usually more expensive.  When you go the normal route in the store you are given that option.  What I believe is happening is that device is not available from the lower price merchant in your region so it defaults to the next lowest priced merchant.  It's probably doing this seamlessly from the Special Offers page, thus creating the price discrepancy.

  • Change "Create a request" button in SMPortal (SSP) to point to custom Request Offering (not Generic Incident Request)

    Hello MSSCSM community,
    is it possible to change the request offering mapping of the "Create a request" button (Image1)? By default it points to "Generic Incident Request" request offering. But this is related to a sealed MP and cannot be edited. So i cannot
    change name, image, user prompts etc. I created a new custom request offering "Incident request" and disabled "Generic Incident Request". But now the "Create a request" button throws an error (Image2) because Generic
    Incident Request is not available anymore. How to map the button to a custom request offering?
    Thanks an regards
    Vesp

    Thanks a lot for your replies. The blog entry is very interesting for having a diffrent "Request offering" mapped to the button instead of standard "Genereic Incident Request (EN)". But i now figured out a very easy solution for me.. i unpublished and disabled "Genereic
    Incident Request (EN)" and then system takes the sealed "Genereic Incident Request" (without (EN)) that cannot be edited. I simply reenabled and published "Genereic Incident Request (EN)" and now i can modify this completely and its mapped to the button
    by default. I think system always uses sealed "Genereic Incident Request" as fallback. Only constraint is that i cannot change the MP and Template in Request Offering "Genereic Incident Request (EN)". But template can be edited also.. so its fine for
    me. Sorry for this kind of questions, i am new to the MSSCSM topic.
    Maybe this will get more flexible in future releases of scsm.
    Thanks
    Vesp

  • Photoshop cc special offer not for everyone?

    Could someone from adobe explain why this offer is not extended to users in south africa?
    Will it be available and when? Adobe actually comes up with a cc plan that interests south africans (yes I have done a search and seen comments in various places on the net where south africans have expressed enthusiasm only to be fobbed off with comments such a '' stay tuned'' or  linked to a faq that says cc is available in SA. ) .We have creative cloud available but no single app options and not this special. I have very little interest in paying 3 times the amount p/mth to get all the apps when I do not use them (and whilst being prey to any currency fluctuations as here we pay in us$).
    Also adobe needs to do something about creatives that travel or change countries. When a person changes their billing address of their card to reflect their new address abroad there is stuff all way to change the country in the billing information on ones account -  what is the solution? create a new account,  get a new card ? and when the offer you are interested in is not available in the current locale one finds oneself in then what? tough luck you should have stayed at home?

    Hi saffa
    I'm pleased to let you know that the offer is now available to customers in South Africa - http://www.adobe.com/africa/
    Thanks
    Bev

  • Hierarchical sql-how to get only branches with at least one not null leaves

    On 10gR2 we want below hierarchical query to return only the branches which at least have one not NULL leaf ;
    -- drop table corporate_slaves purge ;
    create table corporate_slaves (
    slave_id integer primary key,
    supervisor_id references corporate_slaves,
    name varchar(100), some_column number );
    insert into corporate_slaves values (1, NULL, 'Big Boss ', NULL);
    insert into corporate_slaves values (2, 1, 'VP Marketing', NULL);
    insert into corporate_slaves values (9, 2, 'Susan ', NULL);
    insert into corporate_slaves values (10, 2, 'Sam ', NULL);
    insert into corporate_slaves values (3, 1, 'VP Sales', NULL);
    insert into corporate_slaves values (4, 3, 'Joe ', NULL);
    insert into corporate_slaves values (5, 4, 'Bill ', 5);
    insert into corporate_slaves values (6, 1, 'VP Engineering', NULL);
    insert into corporate_slaves values (7, 6, 'Jane ', NULL);
    insert into corporate_slaves values (8, 6, 'Bob' , 3);
    SELECT sys_connect_by_path(NAME, ' / ') path, some_column col,  connect_by_isleaf isLeaf
      FROM corporate_slaves
    CONNECT BY PRIOR slave_id = supervisor_id
    START WITH slave_id IN
                (SELECT slave_id FROM corporate_slaves WHERE supervisor_id IS NULL) ;For this example wanted output is like this one since Marketing has no NOT NULL some_column leaves where as Engineering and Sales has at least one;
    PATH                                                                            
    / Big Boss                                                                  
    / Big Boss  / VP Sales                                                      
    / Big Boss  / VP Sales / Joe                                                
    / Big Boss  / VP Sales / Joe  / Bill                                        
    / Big Boss  / VP Engineering                                                
    / Big Boss  / VP Engineering / Jane                                         
    / Big Boss  / VP Engineering / Bob                                           Regards.

    Here is a slightly modified version, you can try it:
    WITH SRC AS (
    SELECT   SYS_CONNECT_BY_PATH(NAME ,
                                 '/ ') path,
             SOME_COLUMN COL,
             CONNECT_BY_ISLEAF ISLEAF,
             CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
             SLAVE_ID slave_id,
             CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
             SOME_COLUMN
        FROM CORPORATE_SLAVES
      CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
    SELECT path, col, isleaf
    FROM SRC
    WHERE SUPERVISOR_ID IS NULL
    AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
    PATH                                COL                    ISLEAF                
    / Big Boss                                                 0                     
    / Big Boss / VP Sales                                      0                     
    / Big Boss / VP Sales/ Joe                                 0                     
    / Big Boss / VP Sales/ Joe / Bill   5                      1                     
    / Big Boss / VP Engineering                                0                     
    / Big Boss / VP Engineering/ Bob    3                      1                     
    6 rows selectedI tested it for 1000 records in the source table (tested on Oracle 10 XE),
    and .... the performance was a big surprise:
    INSERT INTO corporate_slaves
    SELECT SLAVE_ID + X SLAVE_ID,
           SUPERVISOR_ID + X SUPERVISOR_ID,
           NAME || ' ' || X NAME,
           some_column
    FROM  CORPORATE_SLAVES
    CROSS JOIN (
      SELECT 10*LEVEL x
      FROM DUAL
      CONNECT BY LEVEL <= 100
    COMMIT;
    SELECT count(*) FROM corporate_slaves;
    COUNT(*)              
    1010 Your query (slightly modified - removed leading space from the separator in CONNECT_BY_PATH):
    set timings on;
    CREATE TABLE BUBA1 AS
    SELECT SYS_CONNECT_BY_PATH(NAME,
                                '/ ') path,
            some_column col,
            connect_by_isleaf isleaf
        FROM corporate_slaves
       WHERE slave_id IN (SELECT connect_by_root slave_id "slave_id"
                            FROM corporate_slaves
                           WHERE some_column IS NOT NULL
                          CONNECT BY PRIOR slave_id = supervisor_id)
      CONNECT BY PRIOR slave_id = supervisor_id
       START WITH SLAVE_ID IN
                  (SELECT SLAVE_ID FROM CORPORATE_SLAVES WHERE SUPERVISOR_ID IS NULL)
    CREATE TABLE succeeded.
    6 095ms elapsedrewritten query:
    CREATE TABLE BUBA2 AS
    WITH SRC AS (
    SELECT   SYS_CONNECT_BY_PATH(NAME ,
                                 '/ ') path,
             SOME_COLUMN COL,
             CONNECT_BY_ISLEAF ISLEAF,
             CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
             SLAVE_ID slave_id,
             CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
             SOME_COLUMN
        FROM CORPORATE_SLAVES
      CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
    SELECT path, col, isleaf
    FROM SRC
    WHERE SUPERVISOR_ID IS NULL
    AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
    CREATE TABLE succeeded.
    167ms elapsed
    SELECT COUNT(*) FROM BUBA1;
    COUNT(*)              
    606 
    SELECT COUNT(*) FROM BUBA2;
    COUNT(*)              
    606
    SELECT COUNT(*) FROM(
      SELECT * FROM BUBA1
      INTERSECT
      SELECT * FROM BUBA2
    COUNT(*)              
    606  ANd now the above tests repeated for 10.000 records
    truncate table  corporate_slaves;
    insert into corporate_slaves values (1, NULL, 'Big Boss ', NULL);
    insert into corporate_slaves values (2, 1, 'VP Marketing', NULL);
    insert into corporate_slaves values (9, 2, 'Susan ', NULL);
    insert into corporate_slaves values (10, 2, 'Sam ', NULL);
    insert into corporate_slaves values (3, 1, 'VP Sales', NULL);
    insert into corporate_slaves values (4, 3, 'Joe ', NULL);
    insert into corporate_slaves values (5, 4, 'Bill ', 5);
    insert into corporate_slaves values (6, 1, 'VP Engineering', NULL);
    insert into corporate_slaves values (7, 6, 'Jane ', NULL);
    insert into corporate_slaves values (8, 6, 'Bob' , 3);
    INSERT INTO corporate_slaves
    SELECT SLAVE_ID + X SLAVE_ID,
           SUPERVISOR_ID + X SUPERVISOR_ID,
           NAME || ' ' || X NAME,
           some_column
    FROM  CORPORATE_SLAVES
    CROSS JOIN (
      SELECT 10*LEVEL x
      FROM DUAL
      CONNECT BY LEVEL <= 1000
    COMMIT;
    SELECT count(*) FROM corporate_slaves;
    COUNT(*)              
    10010
    CREATE TABLE BUBA22 AS
    WITH SRC AS (
    SELECT   SYS_CONNECT_BY_PATH(NAME ,
                                 '/ ') path,
             SOME_COLUMN COL,
             CONNECT_BY_ISLEAF ISLEAF,
             CONNECT_BY_ROOT SLAVE_ID ROOT_SLAVE_ID,
             SLAVE_ID slave_id,
             CONNECT_BY_ROOT SUPERVISOR_ID SUPERVISOR_ID,
             SOME_COLUMN
        FROM CORPORATE_SLAVES
      CONNECT BY PRIOR SLAVE_ID = SUPERVISOR_ID
    SELECT path, col, isleaf
    FROM SRC
    WHERE SUPERVISOR_ID IS NULL
    AND SLAVE_ID IN (SELECT ROOT_SLAVE_ID FROM SRC WHERE SOME_COLUMN IS NOT NULL)
    CREATE TABLE succeeded.
    345ms elapsed
    CREATE TABLE BUBA11 AS
    SELECT SYS_CONNECT_BY_PATH(NAME,
                                '/ ') path,
            some_column col,
            connect_by_isleaf isleaf
        FROM corporate_slaves
       WHERE slave_id IN (SELECT connect_by_root slave_id "slave_id"
                            FROM corporate_slaves
                           WHERE some_column IS NOT NULL
                          CONNECT BY PRIOR slave_id = supervisor_id)
      CONNECT BY PRIOR slave_id = supervisor_id
       START WITH SLAVE_ID IN
                  (SELECT SLAVE_ID FROM CORPORATE_SLAVES WHERE SUPERVISOR_ID IS NULL)
    CREATE TABLE succeeded.
    526 437ms elapsed
    SELECT COUNT(*) FROM BUBA11;
    COUNT(*)              
    6006
    SELECT COUNT(*) FROM BUBA22;
    COUNT(*)              
    6006
    SELECT COUNT(*) FROM(
      SELECT * FROM BUBA11
      INTERSECT
      SELECT * FROM BUBA22
    COUNT(*)              
    6006 Wow.... 526 seconds vs. 0,4 seconds !!!
    131500 % performance gain ;)
    I have got similar results on Oracle 11.2

  • Special Offer not available

    I keep being sent emails by Adobe tellign me that there is a special price available for Creative Cloud for existing users.  When I try to sign up, I am told that I don't qualify.  I have registered copies of Lightroom, Photoshiop Elements and Premiere Elements, all latest versions.  I understand that the elements versions do not qualify as they are not part of Creative Suite, but Lightroom should.  Does anyone know what's going on here.  Firstly, I think I should be eligible and secondly, I resent being sent emails telling me that there is a special offer available that I am not eligible for!

    The offer pricing is for existing users of CS3-CS6, suites or point products.  Unfortunately Lightroom is not a CS product so does not qualify.  I'm sorry that you've received emails for offers you're not eligible for.  Please let me know if I can email you to get further details on the offers you received.
    Thanks
    Bev

  • Not updating Leave balances in Portal as per date

    Dear Folks,
    Please go through the requirement
    Brief Background
    In portal under services of Leave, the u201Cmy leave balanceu201D is able to display only the balance as on today, i.e. date of access. Although option of choosing to see on what date balance is required to be displayed is there, even after inputting the chosen date, the balance does not reflect properly.
    As is - Briefly
    In portal service of leave, u201Cmy leave balanceu201D is not functioning properly as stated above
    To Be
    The display in u201Cmy leave balanceu201D should show the proper balance(absence quota) on the chosen date(say 010409) as inputted, even if some quota balances (absence quota)may have changed/end date reached between the chosen date and today
    Suggest me is there any notes to be applied or what are all the possible changes has to be made
    Thanks in Advance
    Sonali Sur
    SAP HR Consultant

    Thanks for the Responce,
    So  i think the Std Func Module can be modified by generating Accessing code
    or
    should I place a Product errror in OSS ??
    Pl advice
    Regards,
    Sonali sur

  • OFFER NOT HONORED-HELP

     On 6/22 i contacted a Mrs. Coleman in Retention Dept. to discuss whether we would stay with uverse.  After about a 30+ minute discussion she talked with her supervisor and made me an offer I accepted.   She offered to KEEP our bill as it had been last year...authorizing an extra 2 free receivers.  This could NOT be added until the discount on account was up so I was to call back July 1 which i did.CONVERSATION RESULTS:
    UVERSE OFFER 6/22/15contacted RETENTION talked with Mrs. COLEMAN  very nicerenewed TV300maxturbo net       for 119 same as last yearshe gave 50$ in discounts and I am to call in July 1 to get the 2 extra free receivers...this ws promised.now it stands at 137 with the 2 receivers until the new discount can be added#1785327790A xfinity with comcast offers99$/mo50mbp net220 channels which includes encore westernplus 100$ visa card2 yrs. agreement OF COURSE ON THIS PHONE CALL I COULD NOT REACH MRS. COLEMAN.  AND THE PERSON ON THE LINE WOULD NOT HONOR THE OFFER.  I HAVE CALLED AT LEAST 3 MORE TIMES 7/9 TO BRAD IN KY, 7/19 TO LAURA IN SC AND ANOTHER CALL TO EVAN.  I HAVE TALKED WITH NUMEROUS REPS IN THE RETENTION DEPT.  I WAS GIVEN A PHONE NUMBER FOR A COMPLAINT DEPT BUT NO ONE CALLED ME BACK.I FINALLY WAS TOLD THEY WOULD CONTACT MRS. COLEMAN  IN THE TEXAS OFFICE VIA EMAIL AND TELL HER TO CONTACT ME.THIS HAS NEVER HAPPENED AND THIS HAS BEEN GOING ON FOR A MONTH.  PLEASE HELP IN GETTING WHAT I WAS PROMISED .  WE ARE GOOD UVERSE CUSTOMERS AND WE SHOULD BE TREATED AS SUCH. 

    You can send a private message to the escalation team at ATT Customer Care and someone will get in touch with you in two to three business days to help you get a resolution to your problems.
    To check for their reply, click the little blue envelope.

  • FCPx will not open, Leaves spinning beach ball of death over the application which is unresponsive after upgrade to 10.8.2.

    I recently decieded to upgrade my computer from Lion to Mountain Lion, right after the upgrade this problem started with my FCPx 10.0 so i decided maybe the software was unsupported so I chose to download the trial of 10.0.6 FCPx. This aswell became unresponsive. I have already tried deleting all of my FCP projects, which did not change the problem at all. It would be nice if I could get a fast response on this because I have a deadline for an edit of one week.

    HI Suisse-Lad, try removing the FCPX state information..
    Simply
    quit or force out FCPX
    use the Finder or the terminal.app to PURGE | REMOVE | DELETE the following state inforataion from FCPX before you start looking at the FCPX prefs which I'm confident others may suggest.
    Step 1: delete this:
    ~/Library/Save Application State/com.apple.FinalCut.savedState
    Step 2: USe Finder or terminal.app rename these two folders that appear on ANY file systems you have where they exist where you may have asked FCPX to put its goodies, rename to something else:
    Final Cut Events and Final Cut Projects to zzz.Final Cut Events and zzz.Final Cut Projects
    This should cause FCPX NOT to try and reinstate the FCPX UI like it was launched last time and secondly NOT to try and LOAD any events or reinstate an PROJECTS and build proxy thumbnails because it wont find any. If you'r enew to FCPX these two directiries will be likely in your ~/Movies directory...
    Step 3: Launch FCPX and see if yourresults differ.
    Step 4 (optional) IF not then as others may suggest to delete the 3-4 com.apple.FinalCutxxxx.plist files in the ~/Library/Preferences (your home domain library)
    Post your results for other to see.
    Warwick

  • External hard drive suddenly became "unreadable" and the disk utility offers not repair options.  The drive is visible in disk utility but may not be mounted... any suggestions?

    I have a WD My Passport 070A Media 2.0 TB external hard drive that has suddenly become unreadable on my laptop (MacBook Pro circa 2006 with 10.4.11) and I have tried on a MacBook Pro 2011 running 10.6.8 with the same results.  I had tried opening disk utility to repair the drive, but on both machines the drive is visible in the left column, with no indentation below the drive.  When I select the drive in the first aid portion the only options highlighted are info and eject...  I was wondering if anyone had any suggestions to repair the drive.  I am currently in Belize and am not home for 3 weeks yet.  I'm hoping for a fix while I am down here, otherwise I may have to wait...  I appreciate any assistance!
    -Christina

    Hi Christina,
    It's quite possible the AC PSU has given out, if It's only Bus powered as it appears, that's the worst idea ever & asking for eventual problems.
    What Format is it?
    Did you install any WD SW?
    Your best bet is DiskWarrio...
    http://www.alsoft.com/DiskWarrior/
    But others that may work…
    Drive Genius…
    http://www.prosofteng.com/products/drive_genius.php
    TechTool Pro…
    http://www.micromat.com/index.php?option=com_content&task=view&id=31&Itemid=83

  • All offering not displaying in Learning Path

    Hi,
    We have created a course which contains 3 offerings (with different delivery modes), each offering have 1 class.
    When we attach this course to a learning path and an employee subscribes to this learning path, only one offering is getting displayed to employee.
    Can we show all offerings under a course in a learning path.
    Regards
    Manuj

    Hi, Manuj.
    Your Learners should be able to see all Offerings that have Classes that are currently active (have no end date or an end date in the future). 
    Here are three things to check:
    The Learner you are testing with has the appropriate Learner Access defined if the Restricted check box is selected for the Classes that belong to the Offerings
    The Classes that you've created under the three Offerings are currently active
    You are within time period set for the Enrollment Dates listed for each of the active Classes
    Anne
    [email protected]
    www.synergycode.com
    877-487-9637 ext. 87

  • Parent node showing icons or symbols like - though it does not have leaves

    Hi,
    I created an adf tree using a view link between region -- countries-- location .. when i see the tree it appears as if all the parent nodes has child nodes as all the nodes indicate an icon or symbol in it... when i expand the nodes i find it does not have any child nodes... how to overcome this... I want symbols or icons only for those nodes that has leaf nodes .So that i need not expand all the nodes . How can it be achieved . Can someone tell me.... I have seen samples but still encounter same problem ...

    Hi,
    for performance reasons, ADF does not query all data from the database and instead uses deferred data fetches when the node is expanded. Because of this optimizations, all tree ends show as nodes. There is a bug I filed to make the performance optimization optional after which you get what you want (by the cost of slower tree rendering if large data sets are involved)
    Frank

Maybe you are looking for