Offical vista drivers/software for xfi extreme mus

Are they out yet?Cause i still cant get my speakers to run 5. any more on vista i have to use 4. so any help would be great thanks.

I gave instructions for how to download the whole CD via torrent here:
http://forums.creative.com/creativelabs/board/message?board.id=Vista&message.id=2996
Don't pay attention to the guy that claims that it's "spyware city" at that site... If you follow the instructions I gave and only download the specified .torrent file, you won't have any problems. It's when you download unpopular torrents that claim to be something unlikely (one on there claims to be an early release of crysis, for instance), that you're going to find spyware. Be careful with that and always know what you can trust. The download for the X-Fi CD is definitely safe, as I use it myself. Good luck.

Similar Messages

  • Problems with Installing Software for XFi Extreme Gamer C

    Hi, I've just bought an XFi Extreme Gamer card. I've got a dual boot system (two difrent hard discs). The board installed ok under XP and works OK. The problem is that under Win2K Pro the installation comes up with an Entry Point Error for CTXFISPI.EXE WTSRegisterSessionNotification could not be located in WTSAPI32.dll. These files exist on the CD and Hard dri've. I do get sound and music etc but the problem is that when I try to launch the volume control or console etc it says "The current selected audio device is not supported by the application. Do you want select another audio device now?". If you say yes you get the choice of "Follow Windows Default". Now checking the device manager etc you find that Creative SB XFi is there and has no problems. There doesn't seem to be any updated drivers for Win2K on the site, I'm at a bit of a loss what to do next, I only upgraded to try and play some newer games, hasn't helped so far. Also can't launch the diagnostics programme either.
    Any suggestions would be great, I don't if it's Windows fault or Creative at the moment.
    Regards. M B
    P4 Asus P4PE
    2GB
    NVIDIA 6600

    are you blind man? that what nearly every post on this forum is about the complete lack of vista support. Yes we all have the driver but you can forget the console and all of the advanced connectivity you paid for. Creative are just a joke in my opinion why can't they get this sorted i also use optical in for my xbox 360 i'm totally pissed off with this situation. Come on creative get your act together and get some proper support sorted!!!!

  • Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?

    Why can't I install software for AirPort Extreme 802.11n while running Mountain Lion OSX?  The installation CD simply says that the software can't be installed while running this OSX.

    Mountain Lion already has the most recent, updated version of AirPort Utility installed on your Mac. The version on your CD is out of date, so you can trash the CD.
    Look in Macintosh HD > Applications > Utilities > AirPort Utility.

  • M/S Vista compatable software for a CIT 300 VOIP phone

    Does anyone know where I can find the vista compatable software for the CIT 300 VIOP phone?

    Try this link and check if it works for you.

  • Can't find software for Creative Wireless Mus

    I have a Creative Wireless Music system but also have children and they have snapped my cd in half. I am having trouble finding the software for it. I have found the drivers and the updates but I cant find the network setup program or the mediasource organiser that will actually install on my system ( get the error no creative hardware detected).
    Could anybody help please.

    Hi jeremysmai -
    'Discribe' is a product that seems to support your burner (under OS 9 & X) -
    http://www.charismac.com/Support/Discribe/usbdiscribe.html

  • Software for Airport Extreme 1st Gen

    A1143:
    What software to download? Should I need to have the software for it to run? Or is it okay for it just to be a router?
    I'm having a problem in setting up my airport extreme and I'm wondering if it needs to be setup to my computer.
    I bought this from a friend, so my only reference is the manuals and software given here in apple. No box.

    have you tried the following ?
    open system preferences
    open network pane
    select airport in the left list
    click the advanced button
    go to the TCP/IP tab
    set the configure IPv6 field to OFF.
    click OK
    click apply
    now try again to connect to your remote speakers.

  • Alchemy for XFI Extreme Audio Ca

    Will htere be a version of Alchemy for those of us that have XFI Extreme Audio cards?

    dcdrac wrote:
    that still does nto detract fromt he fact hte product is been sold as something it is not.
    In what way? Not trying to defend Creative here (and i have slammed Creative and that card elsewhere), but nowhere on the product page for that card does it say anything about being a card for gaming. Like I said a few minutes researching the card would have told you exactly what it was, and what it was intended for. And also like I said you show me anywhere on this page,?http://us.creative.com/products/prod...9&product=5855?that it says anything about supporting EAX and being used for games. The fact that it has X-Fi in its name is irrelavent (despite the fact it shouldn't) to the fact that you didn't research what you were buying, and then complaining after the fact that it doesn't do what you expected (EAX and games).

  • Making copies HP Office jet J6424 software for Windows 7

    Can not find compatible software for Officejet J6424 All in One Printer and Windows 7 to allow copies. 

    Hi grandmere,
    Welcome to the HP Support Forums! I see you are trying to make a copy on your HP Officejet J6424, but you are not able to make copies.
    I see you are using the Windows 7 Operating system, which would have needed to be installed using the in OS driver, to get a better understanding take a look here: Installing the Printer Software in Windows 7 for a USB Cable Connection, with that being said the in-OS driver some of the buttons on the product do not function and some of the advanced product features are not available.
    Make sure to check out the FAQ's at the bottom of the document to see what workarounds are being used.
    You should be able to make a copy from the front panel of you printer: Changing the Copy Settings for the Current Copy Job
    I hope this helps!
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • Optional drivers for xfi extreme music?

    Been using this card for 2+ years with no probs. Just did a fresh install of xp pro student and crysis crashes often. Some of the issues were ati vid drivers and still may be, but I was able to find and try older versions of the vid card dri'ves that have improved the issue.
    I would like to try older versions of sound card drivers but between the black circles that obscure much of this forum and no listing of?older xfi drivers on creatives download page I have not found anything.
    Also would like to find WHQL approved xfi drivers for xp. The only driver at creatives site pops up the "not approved" window during installation.

    + No more black circles. I can now search and read replies but to no avail. I still have not found info on whql xfi drivers or older drivers.
    I have searched here and the net with poor results.
    Am I missing something obvious?

  • Installing Office 2011-Says software for installation not available

    I've seen this same issue posted, but never found a resolution to the problem.   Office 2011 14.3.9 will not install on Mac Air that is running OS X Version 10.8.5.   Message says that the software needed for installation is not available on my computer.

    What version of Office do you now have? You must have 14.3.8 to install 14.3.9. And 14.3.8 requires 14.3.7, etc.

  • Error when installing drivers & software for Photosmart C410a

    Hi - I have a Photosmart C410a that I am trying to use with a 64-bit Windows 7 SP1 laptop, with an Intel i5-2520M CPU.  The printer was working with this laptop a while ago (back in March), but I applied a Windows update sometime in March, and since then the printer has not worked.  I've tried several times over the past few months, but have had the same result everytime.  Today I've been working on this for 11 hours (no, I'm not kidding...)
    I've tried downloading the latest full software suite and basic drivers (separately) from the HP website, and I tried using the CD that came with the printer.  I tried the Windows 7 wizard and diagnostic utilities available on the HP website.  I've tried setting it up with a USB cable and wirelessly.  I've used the ccc uninstaller to get a clean start, and have followed the instructions of the troubleshooting guides.  But no luck.
    I have this printer installed on another Windows 7 64-bit system, using a wireless connection, and it is working fine.  However, on the 2nd system I cannot get the software or drivers to install.
    The error I get varies a little depending on if I try the USB or wireless installation method, but the consistent parts is "Exit Code = 1603".  When trying to install with the USB cable the error is:
    When I try the wireless install I get this:
    I tried reregistering atl.dll and the windows installer (as suggested here http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02455020&lc=en&cc=us&dlc=en&product=4059652#N38...
    Nothing has worked.  Does anyone have any new suggestions?  Thanks.

    It appears if you are unlucky enough to get ths recurrent fatal error(asI I have) and are not a pc tech,   you have purchased a door stop.  I have purchased hp printers for years but this will be the last.   Like the previous consumer,  I have wasted countless hours on this correction.... Will never happen again.   I will not double the cost of the printer paying consultants who swoop in like vultures to correct the problem. 

  • Please help me to find the drivers/software for SB Surround

    Hi all!
    Does anyone know how to find the drivers fo the SB Surround 5. external sound card?
    Since the HW looks quite similiar to the LIVE 24bit external I tried to install the drivers for it but they didnt work.
    I can not find the SB Surround 5. card in the auto update section.
    Thanks in advance/Bartek

    Here is the link
    http://support.creative.com/downloads/download.aspx?nDownloadId=0588
    The driver suite gives you all the software, plus the newest driver.
    Unfortunately, creative still hasnt listened to us and has not given us DDL. There was no real need to waste 60 bucks on this thing, if all it does is increase sound quality a tiny amount. When I saw the device I, along with many other customers, came to believe that it would allow for surround sound music. However, the device only outputs media that is already in surround sound, as 5. . I have tried AC3 filter, kx driver (wont work) , rednoreck (no asio) , and tons of random plugins for winamp. I have no idea how to get stereo upmixed to 5. with the spdif out on this card. I am going nuts because of this. If anyone knows how to do that please let me know !?

  • 3rd Party Software for AirPort Extreme Base Station?

    Is there any 3rd party software which would allow a little more functionality and control of the device? Like the ability to see wired clients on the network, at the most basic? I have one of the new tower Extremes and Apple seems to have removed the option for downloading AirPort Utility 5.6 which I understand had much more functionality. Can any of you suggest some other software that offers more than the current iteration of AirPort Utility does? Thanks

    Unfortunately no.
    Tell Apple: http://www.apple.com/feedback/airportextreme.html

  • Vista Drivers Needed for PC CAM

    Hello everyone,I need some assistance. I can't get my PC CAM 550 working with VISTA 32 Bit'scould someone please assist. I need drivers for PC CAM 550. Thank you?

    Toshiba does not support anything but windows XP pro and Vista 32bit OS's. There are some severe problems with this model of laptop (the P100) in regards to drivers (even under the supported vista 32bit. They fixed the graphics stuttering problem with the 4.2 bios release).
    You can try a driver from laptopdrivers2go or from some other site. As long as they state they support Nvidia Geforce GO 7900GS and not just Nvidia Geforce 7900GS they should work ok. Just keep an eye on your GPU temperature. If it gets too hot under your ESC key where the card is or you cannot feel any good airflow from the vents on that side try a different driver. And you don't need to worry that much about melting your card as your computer will turn off from overheating first. Just be careful and if that happens uninstall the drivers immediately and try a new set.
    Other than that you would have to get a new laptop.
    Hope it works for you.
    Edited by: ADMIN

  • Vista Drivers Needed for Creative DiVi CAM 525D

    Anyone manage to get their DiVi CAM 525D works on Vista?! Please create the drivers for Vista. Thanks alot!

    BanditoS wrote:
    Oh I forget post my mail [email protected] (Now I'm sure it is cause of my eyes )Thank you beforhand
    check your email, accept my invitation at ringo.. all pics there are from divicam 525d..

Maybe you are looking for

  • How do I connect my time capsule to the internet wirelessly

    I recently moved to a house where the internet is provided wielessly. So I don't have access to the modem to hook up my Time capsule. Is there away I can hook it up with out connecting it to a modem? If so how might I go about doing so?

  • Error on Importing Word document into RH7

    I am attempting to import Word docs into RoboHelp7.  The first several documents are imported and saved into the project without incident. However, one file causes an error: "An error occurred while trying to save data to : <RH project name> <5>.  Th

  • Connecting Ipod Mini To Stereo

    About seven years ago I bought a Sharp stereo system and i just got an ipod mini and i was interested in hooking it up. There is no av jack, only a headphones one. At the back of the stereo, the 2 speakers are hooked up by metal black and red wires.

  • I don't like the New Podcast App, can I revert to listening on iTunes?

    I really hate the newest version of the Podcast App. In the past, I've synced my Podcasts with iTunes and life was good. I delete a podcast and I NEVER had to see it again. I told my iPhone I wanted to see the last 10 podcasts that I downloaded and i

  • Format model oddity; G and V combined

    Hi, can I have your opinion on this.. Some background if you're not familiar with the 'V' in format models: select to_char(100, '999999999V9') newnum from dual;  --- 100 * 10^1 =   1 000 select to_char(100, '99999999V99') newnum from dual;  --- 100 *