Office 2004 and "not responding" message

My office 2004 student/teachers worked fine even on leopard - until recently.
My latest updates were works and life 2009 and Abiword.
Now when i reinstall using all methods suggested, - the install works but on clicking on any of the office icons such as word or powerpoint e.t.c. I get the logo on the desktop for minutes on end and on right clicking the icon I get the grey-out "not responding".
what may be the problem and solution after I have tried the usual ones discussed previously.
Gedeon Herschberg
<Edited By Moderator>

Since the issue you're having is not related to any Apple products, I suggest you post your question on MIcrosoft's own forums for their Mac version of Office as they're more focused on the issue you're having then an Apple forum, as Apple discussions only provide support for Apple products Plus there's Microsoft appointed "MVPs" there to assist:
http://www.officeformac.com/productforums

Similar Messages

  • Flash slows FF with hangs and 'not responding' messages.

    Shockwave flash is causing hangs giving 'firefox is not responding' message and slows my internet experience. I know its the flash add-on because when i disable it, firefox performs much better. I've tried all the suggestions concerning flash problems on this site and nothing has worked. I am running win 7 64 bit (home premium). plus Firefox 36.0.1. All drivers appear to be up to date but i will double check.
    my question is.... is there a way to easily disable/enable flash w/o going into the add-ons manager? Depending on what i'm doing, i'm in add-ons manager to either enable it when i need it or to disable it when firefox is slow and hangs.
    I've gotten to the point where i just open add-ons manager in a tab and leave it open because i know i'll probably be in there turning flash on or off depending on how its effecting my machine.
    Also, i tried running flash in 'ask to activate' mode, but you have to reload the page so it can find the add-on.
    This problem has been ongoing for a couple of months now; Firefox performance used to be so much better but this problem doesn't seem to be getting resolved. I like firefox, I really don't want to go to another browser.
    Thanks,
    Duke

    Hi Duke, your bookmarks and other Firefox data actually are in the C:\Users folder so it's safe to delete the folder under C:\Program Files (or C:\Program Files (x86) on 64-bit systems).
    When you run the installer again, it should detect and use your previous settings folder. To get a clean start on that as well, you can:
    '''Create a new Firefox profile'''
    A new profile will have your system-installed plugins (e.g., Flash) and extensions (e.g., security suite toolbars), but no themes, other extensions, or other customizations. It also should come with completely fresh settings databases and a fresh cache folder.
    ''This does not replace your existing setup; the new folder exists in parallel with your current settings.''
    Exit Firefox and start up in the Profile Manager using Start > search box (or Run):
    firefox.exe -P
    ''Don't delete anything here.''
    Any time you want to switch profiles, exit Firefox and return to this dialog.
    Click the Create Profile button, assign a name like March29, and ignore the option to change the folder location. Then start Firefox in the new profile you created.
    Does that work any better?
    Note: When returning to the Profile Manager to switch back to your normal profile, you might be tempted to use the Delete Profile button. But... it's a bit too easy to accidentally delete your "real" profile, so I recommend resisting the temptation. If you do want to clean up later, I suggest making a backup of all your profiles first in case something were to go wrong.

  • Avoid White Screen and (Not Responding) Message?

    Is there a way to force FrameMaker to update the screen when it becomes unresponsive during lengthy processes?
    I wrote an ExtendScript to open all files in a book (silently), import settings across all files, update the book, and then save as a PDF file. The script runs seven times, each time with different settings to control various things such as conditional text and variables.
    The problem is that FrameMaker churns on certain commands, such as opening all the files and importing the settings. During this time, it might take up to 10 minutes to complete the command across all files in the book. If I click off of FrameMaker onto another applicaiton, and then go back to FrameMaker I see only a FrameMaker container window with a white background. The title bar shows the book name and (Not Responding). The script is still running and everything is fine. But there is no feedback to the user to indicate what's happening.
    Is there no way to force FrameMaker to refresh the window and remove (Not Responding) from the title bar?
    Thanks,
    Jason

    Hi Jason,
    This is more of a limitation of FrameMaker's implementation of the "OWL" interface. The Not Responding title bar and white screen appear not just with scripts and FDK clients, but also with other long FrameMaker operations, like updating large books, etc. In fact, in Kapil Verma's FrameMaker 11 webinar yesterday, the same thing happened when he was creating a book from a ditamap.
    One way you can minimize the effect of this is to use a progress bar with your script, so people will know the progress of the script in spite of the white screen, etc.
    Rick Quatro

  • Acrobat Standard XI: after opening it freezes adn "not responding message appears.

    Acrobat Standard XI: after opening it freezes and "not responding" message appears.  what is problem and how to fix.

    I had some viruses on the system.  got it cleaned and all is good now.
    On Sat, Nov 1, 2014 at 3:35 AM, Pat Willener <[email protected]>

  • "not responding" message across the top of mozilla several times a day and my entire computer lags when I receive that message.

    about two to three weeks ago mozilla started to lag on occasion with the "not responding" message across the top of the browser. it would freeze while i was playing facebook games or while i was watching youtube videos or just trying to scroll down a page, so i used my laptop less and less hoping the rest period would help stop it from lagging and from not responding. now that i have uninstalled useless programs and freed up hard drive space it is still lagging a lot. i even updated to 9.01 and updated the plug-ins that i use and it still lags.

    Have you recently upgraded is so i suggest you run it in safe mode first.
    Below is an example
    [[Safe Mode]]
    and make sure ya plugins aint out of date
    [https://support.mozilla.com/en-US/kb/Safe Mode Plugin Checker]

  • Firefox is slow to load and view pages and repeated "Firefox is not responding" message

    Firefox is quite slow to load and view pages with and I keep getting the "Firefox is not responding" message.
    I have the latest version, plus the latest Adobe Flash Player, Shockwave Player, etc.

    Note that Firefox 36 has been released officially.
    *https://www.mozilla.org/en-US/firefox/36.0/releasenotes/
    It is possible that your security software (firewall, anti-virus) blocks or restricts Firefox or the plugin-container process without informing you, possibly after detecting changes (update) to the Firefox program.
    Remove all rules for Firefox and the plugin-container from the permissions list in the firewall and let your firewall ask again for permission to get full, unrestricted, access to install for Firefox and the plugin-container process and the updater process.
    See:
    *https://support.mozilla.org/kb/Server+not+found
    *https://support.mozilla.org/kb/Firewalls
    *https://support.mozilla.org/kb/fix-problems-connecting-websites-after-updating

  • I have a Windows Vista desktop and an old XP laptop, both run Firefox perfectly. However, my Toshiba Satellite T135 laptop will not run ANY version of Firefox--constant "not responding" messages. Chrome and IE9 work perfectly. Help!!

    To mostly repeat my question, I am a longtime Firefox user on both an XP laptop and a Vista desktop. So here I get the most "capable" computer of all, a Toshiba Satellite T135 laptop, 64-bit Windows 7, 4G RAM...and it won't run Firefox at all! I have installed an uninstalled both Firefox 3, and just now, Firefox 4. No changes. When I open the software, it usually just locks up for a minute or so, and I finally get a "not responding" message at the top of the screen.
    Obviously there is something corrupt in the guts of my laptop. But both IE9 and Chrome work very well--Chrome is blazing fast. I still prefer Firefox because it works best with some particular software I use for work...but I have to go to one of my older computers to do it!
    ANY solutions out there? This seems like a very odd problem.
    Posting from the Firefox website...using Google Chrome!

    I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
    When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
    At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
    I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

  • Getting "Not responding" message and bridge freezes

    When launching Bridge CC on a PC with Windows 7 it gives a "not responding " message in the title bar. If left alone it will eventually open, but is incredibly slow to go to another folder, gets hung up and gives the same "not responding" message.
    It opens to the same folder every time, even if left off at another folder.
    I have uninstalled Bridge CC and reinstalled and still get the exact same problem. Also have done registry cleanup and other PC maintenance.
    Does anyone know of a solution?

    Perhaps someone close (geographically) can give you a hand?
    [http://windows.microsoft.com/en-ca/windows/view-cpu-utilization-performance-information#1TC=windows-7 This Windows Help article] explains how to check for resource use on your PC.
    What I described is a one-step test in Thunderbird: ''On the Help menu, click on "Restart with Add-ons Disabled". '' This would help determine if the problem is among an add-on installed in Thunderbird.
    If that doesn't show improvement, the problem is not within Thunderbird but elsewhere in the system. Starting the computer in Safe Mode then helps confirm if the problem is in Windows (and not specifically in Thunderbird).
    I understand you may not be comfortable doing this by yourself, perhaps ask someone close to help you in person, by showing them our answers here.

  • I have the latest update.  Why does my reader still hang up and give me the "Not responding" message.  I'm on Windows Vista.

    This is a most frustrating situation.  Constantly getting the "not responding" message and any further click of the mouse, and adobe reader goes pale and I have to "end process."  What's the deal?  This use to be a very reliable program.  Now, it's nothing but frustrating and bothersome.

    I had the 10.1.10 version and have updated it to the 10.1.11 version.  I
    restarted my computer.  Same old problem.  Adobe Reader hangs up anytime I
    try to move a document to the second page, for example.  Is there an older
    version I can go back to to avoid this problem.  I'm seeking to view two
    documents--both from Windows Publisher saved as pdf files.  No luck
    Bob
    On Tue, Aug 12, 2014 at 10:19 AM, ~graffiti <[email protected]>

  • I am getting "Not Responding" message. The fix in the Help is confusing and doesn't seem to match my setup. Using Windows 7 & firefox 7.0.1

    The problem started after last update. I tried following the directions in firefox Help without success. They were confusing and the instructions did not match what I was seeing on my screen. I need a simple quick fix thank you.

    There could be more than one reason for such messages.
    There is a problem sometimes with the database file used for history and bookmarks see
    * http://blog.bonardo.net/2011/09/30/is-your-firefor-freezing-at-regular-intervals
    There was a change made which seems to affect some Windows users, and has a workaround, but tends to result in images etc not loading rather than a not responding message see
    * [[firefox never finishes loading certain websites#w_lower-the-max-number-of-http-connections]]_lower-the-max-number-of-http-connections
    Are you getting any other error messages, or indications of problems ?
    * not directly related to an update but also see [[firefox hangs]]
    * and [[Firefox is already running but is not responding]]
    P.S. <br/> I note you have BrowserPlus, that has sometimes, recently, been associated with firefox problems, it would certainly be worth trying temporarily disabling that.

  • Mozilla hangs (not responding)message. I have loaded the latest version and still have the same problem, why?

    Firefox hangs (not Responding message) I tried refreshing Firefox. I tried deleting history. I deleted Firefox and reinstalled the latest version which I already had running before and the same problem occurs. It starts hanging after a few minute when I start the computer mostly on my email page or ebay page and continues to hang for about 5 to 10 minutes then it starts to function normally. It is most annoying and I cannot figure what is causing the problem? Please help if you can?
    Thank you,
    aleggert

    Hello Fred McD,
    If I was unclear I am sorry, I can not start Firefox normally after starting the computer in safe mode with or without the network because my USB internet modem will not allow me access to the internet in the safe mode. the USB modem will not work when the computer is in safe mode. The only thing I can do is start the computer normally then enter Firefox in the safe mode by holding down the shift key and pressing the icon for Foxfire at the same time. This will put Foxfire in the safe mode but the computer is operating in the normal mode Because I can not get access to the internet when I use the computer in the safe mode The USB modem will not connect to the internet when the computer is in the safe mode.
    Thank you,
    aleggert

  • Gallery "not responding" message or Gallery and camera troubleshoot.

    When I startup Gallery or after taking a photo, I get the "not responding" message within a few seconds.  Any help or known errors by anyone else?
    Thanks

    The first thing that I'd try is:
    Settings > Application manager > All > Gallery and clear Cache and Data
    Settings > Application manager > All > Media Storage and clear Cache and Data.
    then reboot your phone.
    If that doesn't work try a OS cache clear.

  • After my windows 7 computer did automatic updates, everytime I click on a link I get a not responding message and have to wait almost a minute for the program to continue.

    Last night, my computer running Windows 7 premium home edition downloaded some automatic updates. I came in this morning to find that it had done a restart after adding these updates.
    Now, anytime I click a link or do something which requires a redirect to another web page, my program gives me the not responding message and I have to wait 30-55 seconds for the program to continue.
    I have Firefox 4 and it was running smoothly up until this morning, so I can only assume that whatever the automatic updates were, there is something in them that is causing this error. I do not know what updates were installed.

    I don't have that problem in Firefox 29 when I read Gmail or AOL (aim''.''com) webmail. When I click on a webpage link in an email I'm reading (example: http://www.tworivertheater.org/ ) the link opens in a separate Firefox tab.
    Are you saying this doesn't happen in outlook''.''com webmail and the link opens in the same Firefox tab as the email itself? I don't use outlook''.''com webmail myself. Hopefully someone will be along who does, or see [[Problems with email and how to find help]].
    It might help if you would confirm the type of link that is opening in the same tab as the email you are reading in your outlook webmail. If I misunderstood your problem, please explain it better.
    It might also help if you could furhish more troubleshooting information. Please do the following:
    *'''For Firefox 29.0 and above''': Click the menu button [[Image:New Fx Menu]], click help [[Image:Help-29]] and select ''Troubleshooting Information''.
    Now, a new tab containing your troubleshooting information should open.
    *At the top of the page, you should see a button that says "Copy text to clipboard". Click it.
    *Now, go back to your forum post and click inside the reply box. Press Ctrl+V to paste all the information you copied into the forum post.
    If you need further information about the Troubleshooting information page, please read the article [[Use the Troubleshooting Information page to help fix Firefox issues]].

  • After updating, I receive a not responding message, and then it freezes

    after upgrading to firefox 6, I now continuously receive a "not responding" message at the top of page, and it freezes. I have disabled all add ons, but connot run some things. I have a lot of trouble playing games on facebook, because it freezes up so much, and crashes on the add ons. I have the message and freezing on all pages I open. can you help?

    You can check that your plugins are up to date by clicking on this link:-
    http://www.mozilla.com/en-US/plugincheck/

  • My Firefox won't quit and gives a "not responding" message after I use Google Mail. I have tried starting in "safe" mode and the problem still occurs.

    I have an issue where Firefox wont' quit and gives a "not responding" message after I have been using Google Mail. It works fine when I am not using that program. I have tried Safe Mode and the problem still happens when I go to Google Mail, so it is not connected with add-ons, extensions, etc.

    Many site issues can be caused by corrupt cookies or cache.<BR><BR>
    Clear the Cache<BR>
    '''''Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"'''''
    <BR><BR>and<BR><BR>
    Remove Cookies<BR>'''''Firefox/Tools > Options > Privacy.'''''<BR>
    Under '''History''', select Firefox will '''Use Custom Settings'''.<BR>
    There is a button on the right side called '''Show Cookies'''.<BR><BR>
    If there is still a problem,
    '''''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]'''''
    <BR>While you are in safe mode; '''''Firefox Options > Advanced > General'''''.<BR>
    Look for and turn off '''Use Hardware Acceleration'''.<BR>
    Poke around safe web sites and see if there is still a problem. Then restart.

Maybe you are looking for

  • CUPC Over VPN

    We resolved a VPN issue that was preventing us to be able to log in to CUPC over VPN. I am now able to log in, I can see my buddy list and their status, however the CUPC status in the bottom of the window is listed as "Offline (No Network)". Server H

  • Error stating "too many decimal places (max allowed 0) while getting input

    Hi experts    In one of my reports the input is accepted for the user for a field . The field was initially declared as AZINSSATZ ( Data Type  DEC    Length     10         Decimal Places   7 ) . It did not accept the values like 12.5 .Inorder to give

  • Can't download the latest update for iTunes

    Hi, I tried to download the sofware update for itunes 10.6.3 for my MacBook Pro, but as soon as the download begins, it stops and I get an error message saying: "The update 'iTunes' can't be installed", and also "The update could not be verified..."

  • Cannot place custom subVI on the block diagram

    When I press the "Select a VI..." button on the function palette and select the VI I want to place on the block diagram nothing happens. This only seems to be happening for two particular VIs. Most of the time I can place the custom subVI without any

  • Re: C API library

    hi: I use VC++ to program based on oracle8.1.7 OID C APIs,I already have a question.According to OID programer's guide,I can use $ORACLE_HOME/ldap/public/ldap.h and $ORACLE_HOME/lib/libldapclnt8.a. But unfortunately I can't find libldapclnt8.a in the