Office 2010 and windows 7 not save power point presentation ?

I am opening Power point Presentation 2010 then internet gives me 3 options , open , save, cancel.
If i save Power Point Presentation then i will save it to drive location. after some modification and saved back to presentation. i have user power point plg-in.
But when i click open then power point presentation open if i change some part and click Plug-in for save back to presentation. it gives me following error message:-
Run-time error '- 2147467259(80004005)': Presentation (Unknown member) : An error occurred while Power Point was saving the file.
Can anyone help me out...
Thanks,
Mangesh :-)

I have no idea what you mean. I suggest you call into Adobe Support and discuss the problem.

Similar Messages

  • I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents?

    I am using MS Office 2010 and Windows XP Professional, can I use iCloud for backup of my files and documents? I am planning to transition to a Mac so using the iCloud seems to make the most sence.

    No, it is not a backup method at all.  If you delete a sync'd file on any device, you delete it permanently from iCloud.  That by its very essence is not a backup solution therefore.  A backup solution does not automatically and simultaneiously delete the file everywhere when it is deleted from the original source.
    iCloud is strictly a syncronization tool for using files on multiple internet connected devices.

  • Office Web Apps 2013 not loading Power Point

    I installed Office Web Apps (2013) patched on a 2012 R2 server and I am having issues loading a power point onto the stage in a conference. It says "Loading..." for a few minutes and then eventually says "Either you've lost network connectivity
    or our server is too busy to handle your request. Please check your network connection and try again later."   Se the error below
    Gerald Csakany

    For this issue, verify the
    Office web Apps configuration and check below link {it's same issue}
    http://blogs.technet.com/b/dodeitte/archive/2013/11/10/issue-with-office-web-apps-server-2013-published-externally-using-tmg-2010.aspx
    Also refer below link to help you in troubleshooting
    http://digitalbamboo.wordpress.com/2013/09/07/how-to-resolve-the-lync-2013-power-point-conference-sharing-error-with-office-web-app-server-wac-some-presenting-features-are-unavailable-due-to-server-connectivity-issues/comment-page-1/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical | Twitter:
    Mai Ali

  • I used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos?

    i used my i pad for the first time to take pictures and videos. Do I download it on my I mac before using it as a power point presentation? I also want to separate my pictures and my videos? This also the first time that I'm using the apple support communities.

    You can import the videos and photos using iPhoto or Image Capture on your Mac.
    Connect the iPad to the Mac with the cable and launch either of those two applications on the Mac. Your iPad should appear as a device in the left side of the app. Click on the iPad name and then you should have access to all of the photos and Vidoes in the camer roll and you can import them onto the Mac.
    Im not sure what the reference is to Power Point in this case. You can use the imported photos and videos in a Power Point presentation after you import them to the Mac.
    Are you trying to create a Slide Show on the iPad? Is that what you mean by a Power Point presentation?

  • Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

    Hello, what to do if a program crash? I was working in a power point presentation and suddenly the little rainbow circle appeared and can not close the program, thanks

    Welcome to Apple Support Communities
    Press Alt, Command and Esc keys, select the crashed app and force quit it. Then, open this app again.
    If you didn't save this document, it's possible that you lost the changes you made unless you have OS X Lion or Mountain Lion and they saved your document automatically

  • I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors. My window is now "stuck" when I Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    I have 2 screens at work and 1 screen at home. I was working on a power point presentation on 2 monitors with the presentation on monitor externally hooked up to my computer. My window is now "stuck" when I open Power Point. I cannot drag it back to a display or find any way to move it back into my view. Help!!!

    Here is what worked for me:
      My usb hub, being usb2, was too fast. I moved the wire to a usb port directory on my pc. That is a usb1 port which is slow enough to run your snyc.

  • ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

    ICloud will not sync my contacts or calendar in Mac Office 2011. ICloud does however sync to my PC at work running Microsoft office 2010 and also to my IPad and IPhone. Does anyone know how to fix this?

    Welcome to the Apple community.
    Unfortunately Office for Mac does not support the correct protocols to work with iCloud.

  • How do I open MS office power point presentation from older version and see it in 2011 version?

    I try to open a power point presentation and it opens it but then I can't see any of the slides....any suggestions?

    If you don't get help here please visit the Office for Mac Product Forums.

  • I have a Windows 8.1 machine.  I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    I used a projecteor a while back in a Power Point presentation.  Now my menus for Adobe are very small and hard to read.  The print command is so compressed that I cannot read or use it.  How do I fix this problem?

    There is no application called "Adobe" - you are either working with Adobe Acrobat or the free Adobe Reader. Open up the preferences for the application (Edit>Preferences), then go to the "General" category and modify the settings for "Scale for screen resolution". You will have to restart the application after you do that. Does that fix your problems?

  • Email links in Firefox 5.0 will not auto open in Outlook 2010 AND Windows Live Mail 2011

    Outlook msg: General failure. An error occured in sending command to the application.
    Windows Line Mail: There was a problem sending command to the program.

    Many thanks jscher2000, problem solved.
    Firefox 5.0
    Windows 7 Pro.
    Outlook 2010
    Windows Live Mail 2011
    In the article, only plugin.disable_full_page_plugin_for_types was present. After resetting then closing Firefox, normal service was resumed.
    Links now opening from Outlook 2010 and Windows Live Mail 2011.

  • Office 2010 and Lync 2013 installed caused Powerpoint to become corrupted from internet sources

    I'm finding that we're having problems with Office 2010 and Lync 2013.
    Our environment is setup as follows:
    Operating system: Windows 7 Enterprise 
    Office: Office 2010 (Word, Excel , Powerpoint, Access etc)
      Office 2013 (Only Lync has been installed for 2013)
    Problem: The issue is that when any Powerpoint documents come from internet sources (Such as Outlook or downloading directly from an internet browser), attachment manager deems the Powerpoint a security risk. When you open the Powerpoint it states that it's
    corrupt and needs to be repaired, when you try repairing the powerpoint, it says it's not going to be possible. 
    The only workaround is right clicking the power point in explorer and clicking properties, there's then a security prompt at the bottom of the dialog box and an option to "Unblock".
    The temporary fix: The fix is to remove Lync 2013 and the power point presentation open correctly from Internet sources.
    Attempted:
    I've attempted the following:
    - Build a laptop with a plain version of Windows 7 enterprise
    - Install Office 2010 Professional
    - Test powerpoints from internet sources (Working)
    - Install Lync 2013
    - Test powerpoints from internet sources (Same error)
    Any ideas?

    Just to let you know that switching off protected view in Powerpoint for files originating from internet sources and Outlook attachments is a workaround for the issue.
    I would be cautious about switching off Protected view though, here's a good article explaining the inner workings of Protected view:
    http://blogs.technet.com/b/office2010/archive/2009/08/13/protected-view-in-office-2010.aspx
    Concerning this problem, I also noticed that after removing Office 2013 and starting Powerpoint, a MSIEXEC instance is started.
    Presumably some DLLs are missing or some registry keys are missing when installed with Lync/Office 2013.
    I also went to the trouble of snap shotting the registry and using Procmon to see what gets loaded and added when Powerpoint repairs itself on first start after removing Office 2013.
    Unfortunately there are a number of things which change and couldn't be changed on the Office 2010 and Lync 2013 setup to fix the problem. 
    My advice would be the following:
    - Update to Office 2013 fully
    - Downgrade to Office 2010 Lync
    - Switch off protected view 

  • Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for editing, excel,power point presentation

    Hello friends recently shifted from windows to mac need some suggestion on which software to go ahead with for creating word editing, excel,power point presentation.

    Only Microsoft's Office for Mac 2011 14.4.8 will work on your Windows Office files in their native document format. Anything else, and particularly Apple's Pages, Numbers, and Keynote will perform translation on open, and export. This can, and will, introduce differences to your original documents, especially when sharing with others in the Windows Office 2010/2013 applications.
    Here is my short list.
    Office for Mac 2011 v14.4.8
    LibreOffice (latest)
    The current iterations of Apple's Pages, Numbers, and Keynote are not what I would term business/professional grade applications. Apple updates them infrequently, ignores user friendly features, omits others, and has introduced default backwards incompatibility between Yosemite and prior OS X releases of these applications. Read the reviews in the OS X App Store. Even for free with a recent Mac purchase, these products will transform your mood.
    The free LibreOffice is aggressively developed and designed as an MS Office replacement suite. There are occasions where it can open documents that Office for Mac, and Apple's products ignore. Extensive PDF manuals for the individual applications. Unlike Word, you can have two-up page viewing with a button click, or edit multi-page PDF. There is a forms designer. It can open nearly any document including MS Publisher and Visio documents from the Windows space. I use it.
    MS Office 2015 Preview for Yosemite is available, but as its title would suggest, it is not done yet, and some features are missing. I created a single-page Word document with a DRAFT watermark. Only LibreOffice v4.4.1 was able to open this document and preserve the watermark.

  • Can I modify a power point presentation on the keynote and send it back as a power point? Will a PC be able to open it?

    Can I modify a power point presentation that was sent to me on my keynote (OS X version 10.9.4, processor 2.6 GHz Intel Core i5, memory 8GB 1600 MHz DDR3), and send the presentation back after the modification as a power point? Will a PC be able to open it and work with without any problem? How should I do it? Also, there are some videos that do not play, what should I do?
    Thanks for the help.

    Can I modify a power point presentation
    Keynote will open, edit and save PowerPoint files.
    In Keynote use:    File > Open, then select the PowerPoint file.
    Once edited save it by:   press the Option key then,    File > Save As
    PowerPoint file will open if the user has either PowerPoint or PowerPoint Viewer installed on the Windows computer.
    Also, there are some videos that do not play, what should I do?
    If they are Windows Media files they would have to be converted to play on a Mac.

  • Best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    best way to format my 16GB flash drive for Mac and PC transferring large power point files?

    format flash drive in Exfat for transferring files between Mac and Pc.
    FORMAT TYPES
    FAT32 (File Allocation Table)
    Read/Write FAT32 from both native Windows and native Mac OS X.
    Maximum file size: 4GB.
    Maximum volume size: 2TB
    You can use this format if you share the drive between Mac OS X and Windows computers and have no files larger than 4GB.
    NTFS (Windows NT File System)
    Read/Write NTFS from native Windows.
    Read only NTFS from native Mac OS X
    To Read/Write/Format NTFS from Mac OS X, here are some alternatives:
    For Mac OS X 10.4 or later (32 or 64-bit), install Paragon (approx $20) (Best Choice for Lion)
    Native NTFS support can be enabled in Snow Leopard and Lion, but is not advisable, due to instability.
    AirPort Extreme (802.11n) and Time Capsule do not support NTFS
    Maximum file size: 16 TB
    Maximum volume size: 256TB
    You can use this format if you routinely share a drive with multiple Windows systems.
    HFS+ ((((MAC FORMAT)))) (Hierarchical File System, a.k.a. Mac OS Extended (Journaled) Don't use case-sensitive)
    Read/Write HFS+ from native Mac OS X
    Required for Time Machine or Carbon Copy Cloner or SuperDuper! backups of Mac internal hard drive.
    To Read HFS+ (but not Write) from Windows, Install HFSExplorer
    Maximum file size: 8EiB
    Maximum volume size: 8EiB
    You can use this format if you only use the drive with Mac OS X, or use it for backups of your Mac OS X internal drive, or if you only share it with one Windows PC (with MacDrive installed on the PC)
    EXFAT (FAT64)
    Supported in Mac OS X only in 10.6.5 or later.
    Not all Windows versions support exFAT. 
    exFAT (Extended File Allocation Table)
    AirPort Extreme (802.11n) and Time Capsule do not support exFAT
    Maximum file size: 16 EiB
    Maximum volume size: 64 ZiB
    You can use this format if it is supported by all computers with which you intend to share the drive.  See "disadvantages" for details.

  • Issues with Office 2010 and Acrobat Pro 8

    Good Day All;
    We are in the middle of upgrading from Windows XP to Windows 7 with Office 2010 and I was wondering if there are any issues with importing Office documents into Acrobat Pro 8. I have found out that there are a couple of issue with Office 201 and LifeCycle Designer.
    Any comments would be helpful
    Regards
    Chomp

    Acrobat 8 is not compatible with Microsoft Office 2010 and the PDFMaker plugins will not install. Only Acrobat X is compatible with Office 2010, and at this time only in 32-bit mode.
    Acrobat 8 is also not officially compatible with Windows 7, again Acrobat X is the first version to carry approval for that OS. It will still install, but Adobe cannot guarantee it will operate perfectly in all cases, and doesn't provide install support for that combination.

Maybe you are looking for