Office 2010 BEx warning message Worksheet BExReporsitory Sheet is protecte

Hi gurus,
we upgraded to Office 2010 and when opening an IP-Layout we get the warning message Worksheet BExRepository Sheet is protected without supplying password. When you confirm you can continue your work.In excel 2003 nothing came up. Can anyone tell me how to correct this or surpress this?
We are on Fronend Patch 201. There the issue occures. I thought it was a bug in FEP 201 maybe so i upgraded to FEP 401 but the warnbing message persists. Can anyone help or give me a hint?
I dont want it to do it for all IP-Layouts seperately with surrpress messages.
Why does this happen?
Thanks and regards,
Murat

Hi Murat,
Please take a look at SAP Note 1498919.
This Note contains the limitations with Office 2010 and BEX but also contains workarounds for using Office 2010.
Hope this helps!
Kind regards,
Karen

Similar Messages

Workbooks becoming corrupted using Windows 7, Office 2010, BEx 3.x, GUI 720

Hi Experts.
I have just been upgraded from XP to Windows 7 and from Office 2003 to Office 2010. I have installed SAP GUI 720 patch level 5 and I've patched the BEx 3.x portion as well since we are still on BEx 3.x queries and workbooks.
I can execute queries and workbooks with no problems. When I save a workbook, and then I try to reopen that workbook it's corrupt. Excel doesn't even recognize the file format. When I tell Excel to open it anyway, it's in machine language.
I ran the installation check for the Business Explorer and it found 54 RED errors. I uninstalled and reinstalled again, but still have gotten the 54 RED errors. Any ideas how to fix this?

Dear Adam,
Unfortunately Excel 2010 has a lot of bugs.
The SAP is working on these issues but, it seems the issue lies over a Microsoft DLL.
Per my experience, I recommend you to use Excel 2003 or Excel 2007. They are working fine with BEx Analyzer.
Kind regards,
Rafael Lermann

Office 2010 fail - WARNING: Install failed, error = 0x80070663

Hello,
I can't seem to get SP2 for Office 2010 pushed out to a selection of Win 7 PCs, they get this error code:
WARNING: Install failed, error = 0x80070663
Has anyone seen this before?
Thanks

Can verbose logging get turned on? We are just using the c:\windows\windowsupdate.log file.
We are just testing against a group of Windows 7 PCs that are a common build within our company. It seems most need around 1.5GBs of updates!
We approved all over the required updates (yeah I know, we don't have time to check/test all) and most of the PCs needed several reboots and most
said failed and had to roll back, but it seems it did do most updates of many days. I'm not sure why they were failing, is it because they are so out of date and some of the approved updates are pre-requisites?
We are new to WSUS, I think I ready another post uses a readiness tool, would that help?
Thanks

Suppress Warning Messages

Each time i make any change to the query and execute the query on Web I see message like the Query has chnaged etc.I tried to suppress these message by making the "Warning Visble" and "System Messages" to OFF in WAD. But still i get these messages.We are on NW2004s.Any suggestions?

Have you tried this:
How to suppress BEx warning messages
1)     transaction RSRT
2)     transaction SUPPR_ALL
3)     check message to be suppressed
4)     save
5)     this must be done in all clients where message needs to be suppressed.
This affects all warning messages.
You can suppress a BRAIN message for ALL queries. It is included in Support Pack 12 in Netweaver 2004s. If you are not to SP 12 yet, you can implement OSS note #1009903.

MDT capture warning: Unexpected return code while re-arming office 2010, RC= -1073425657

Greetings,
I have a base image I have created with an MDT task sequence, than I am then immediately capturing with another MDT task sequence (the capture sequence is basically the default). After capture, I get 0 errors, 1 warning: "Unexpected return code
while re-arming office 2010, RC= -1073425657".
I am capturing immedaitely after the base image build, and even more strangely, even with Office 2010 removed from my base build, I STILL get this warning! Office isn't even on there anymore (I verified before capture just to double check).
Not sure how or why this is happening - or more importantly, should I care? I've deployed a couple of machines using this image, and both Office and Windows show as activated. Can this safely be ignored, or if not... what is the fix?
Thanks in advance!

Freddie,
Please read your own post again, can you tie the knots together, because your phrasing is going crazy!?!
However, if using the sysprep step from within a MDT task sequence, please scroll through the ZTISysprep.wsf to find that not only the machine will be sysprepped, but also Office 2010 will be automatically re-armed, this is provided in the script already,
so no need to run it on your own.
Ok how do i undo that because thatswhy the message appears to many rearms...
If a machine is domain joined, it will not sysprep and capture. Also I wouldn't sysprep and capture an already sysprepped and captured image again (based on gut feeling) and as always check your logfiles, they can reveal what is going on here.
The machine is not domain joined in the Vm. And i do not sysprep and capture twice.Which logfiles exactly to see?
If this post is helpful please click "Mark for answer", thanks! Kind regards
freddie

BEx Broadcasting possible windows 7 and Office 2010

Hi guys,
i have a question concerning Bex Broadcasting. We use two desktop Physical PCs with OS XP . The service is running on them. We would like to Upgrade to windows7 and Office 2010. Office 2010 is rolled out on them but windows 7 will be rolled out soon. i have compatibility concerns. The client PCs from where the chains will be exIs Bex Broadcaster working onecuted and also the PCs where the precalculation service is installed and the precalculation takes place will be updated to windows7. Is the broadcaster compatible with that? or are there any restrictions/limitations?
Thanks and regards,
Murat

Hi and Welcome to the Forums!
Many have had issues, many have had success. The only way to diagnose is with details..."it will not sync correctly" only leaves us to guess. Here are some details that might help:
1) Your BB Desktop Software version -- all 4 octets please
2) Your BB OS level -- again, all 4 octets
3) Your carrier/country
4) What, exactly, happens when you try to sync? Can you configure and not sync? Can you not configure? Are there error messages? Details please to help us to help you.
Good luck and let us know!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Warning message in my bex query designer

Hi all,
I am getting warning message while generate a query in bex analyzer. Can anyone let me know the procedure how to suppress those messages while running the query.
thanxs
haritha

Haritha,
In Bex select Business Explorer on the File Menu, select Settings and then select Suppress Warnings from Server. It will need to be done on each PC to remove the warning messages.
Regards
Gill

Can not open Excel 2003 embedded worksheet in Office 2010

I have seen many similar issues to this but I think I have some unique factors that are making my issue a bit tougher to resolve. I have a user who has a word doc which he opens in Word 2010. This doc has several embedded excel sheets. When he tries to click
one of these embedded excel sheets to edit he gets an error: "the program used to create this object is excel the program is not installed on your computer". It will give an option to repair which we have tried but it makes no difference.
Some things to note that I think makes this case more unique than others I have googled.
This seems to be the case only with embedded excel 2003 spreedsheets. He can open newer excel 2010 spreedsheets that more more recently added to the file.
He previously had Office 2013 which we had to uninstall, and put Office 2010 on. This was done because of a piece of software this company uses that was not compatible with office 2013. (Personally I think this may be where the problem is as there seem to
be remnants of Office 15 in the registry.)
I have tried the standard fixes of Disabling the Com add-ins, running office repair, and trying to Convert the embedded spreedsheet to an Excel Binary. The convert failed and gave me a generic error about possibly not being allowed to save to the location
or needing more memory or space but none of these are the case.
I have not yet tried to uninstall office 2010 and reinstall and I am hoping that I won't have to. This issue just seems odd to me. Other users can edit these embedded spreedsheets fine which is why I think it has something to do with the fact that he downgraded
from 2013 to 2010.
Anyone of thoughts, ideas, suggestions? Thanks.

Hi,
I noticed that use newer excel 2010
spreadsheets that more more recently added to the file. Did you try to embed the Excel 2010 file to Word 2010 test? If it works fine, I suppose that it was a compatibility issue.
Because Excel 2010 had change the file format with Excel 2003.
I recommend you try to install Office 2010 sp2 and compatibility pack.
http://blogs.technet.com/b/office_resource_kit/archive/2013/07/31/download-the-new-microsoft-visio-compatibility-pack.aspx
https://support.microsoft.com/kb/923505/en-us
And there is a similar issue, we also could install the hotfix to test.
http://social.technet.microsoft.com/Forums/office/en-US/b0dc1e24-847d-44e9-95c5-f789a0d50047/cannot-edit-embedded-excels-after-closing-document?forum=officesetupdeployprevious
Regards,
George Zhao
TechNet Community Support

BEx Analyzer with GUI 720 and MS Office 2010 does not work

I have recently installed SAP GUI 720 with BEx addon (7 and 3.x) on a computer with Office 2010 and Windows 7.
All BEx components work fine except Analyzer 7.
When starting Analyzer 7 nothing happens.
I have tried instead starting transaction RRMX from a BI system but this generates a short dump.
Does anyone have an idea about what could be the problem?
<<text removed>>
Best regards,
Didrik
Edited by: Matt on Sep 22, 2010 8:17 AM

Hello Didrik von Essen,
guess its issue with Excel Addins. i rectified the same issue by enabling the excel addins.go to Application wizard. and change the please find the screenshot . let me know if it works

Either there is no default mail client or the current mail client cannot fulfill the messaging request" error message when you send e-mail from Office 2010 in Outlook

Hi,
If save and send as attachment used in MS Office 2010 then outlook 2010 displays error "Either
there is no default mail client of the current mail client cannot fulfill the messaging request-----error Outlook 2010"
Windows 7 32 bit Enterprise edition and Offoce Professional plus 2010 32 bit is installed in the machine.
I have followed the below troubleshooting steps but still getting the same error.
Method 1:
Followed the Microsoft fix
http://support.microsoft.com/kb/813745
1. On the Windows taskbar, click
Start > Run.
2. In the Open box, type the following text:
3. regedit
4. Press Enter.
5. Go to the following registry key:
6. HKEY_LOCAL_MACHINE\SOFTWARE\Clients\Mail
7. In the right pane, right-click
the following registry value:
8. PreFirstRun
9. Click Delete
10. Click Start, and then click Run.
11. In the Open box, type regedit, and then pressENTER.
12. InRegistry Editor, locate the followingsubkey in the registry:
13. HKEY_LOCAL_MACHINE\Software\Clients\Mail\Microsoft Outlook
14. Select thesubkey, and then pressDELETE.
15. Click
Yes.
Method 2:
Repaired Office
Method 3:
fixmapi.exe. Mapi32.dll
Method 4:
Created the below registry key HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Offlce\15.0\Outlook
Create the following String value if it does not exist: Bitness Set the String value for Bitness to the following if it is not already set to x86
Method 5:
Compared the installed applications
Uninstalled the below program :Microsfot Visuall C++ 2008 Redistributable - x86 - KB2467175" and installed "Microsfot Visuall C++ 2008 Redistributable - x86 - 9.0.21022"
Please help to solve the issue.
Regards,
Boopathi S

Hi,
Do you mean Send as Attachment button under File>Save & Send>Sending Using E-mail
in Office applications, like Excel or Word?
Is this an issue that come up recently? Have you ever made any changes to your system?
If you have installed multiple e-mail programs on the same computer, please try to make Outlook the default mail client and then try again:
http://office.microsoft.com/en-us/outlook-help/make-outlook-the-default-program-for-email-messages-contacts-and-calendar-HP010355552.aspx
http://support.microsoft.com/kb/223877
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

"The language of this installation package is not supported by your system" Error Message when installing Office 2010

Hello, I am having a very hard time attempting to install Office 2010 Pro Plus on a system. The error message that I receive is as follows:
The language of this installation package is not supported by your system.
I have tried running the Microsoft FixIt tool to remove any traces of Office 2007 and Office 2010. Also, I have followed the instructions in
KB928218 to manually uninstall any traces of Office 2007.
I believe the user had both Office 2007 and Office 2010 installed previously. There is no article to remove all traces of Office 2010.
Here is some additional output from the Setup log:
Parsing setup.xml file: F:\Access.en-us\setup.xml
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Error: Installation of this product requires operating system supplemental language support. Type: 54::NoSupportedCulture.
Showing parent-less message Title: 'Setup Error', Message: 'The language of this installation package is not supported by your system.
I have tried both running setup from a disc and a network share. I am completely stumped and have been trying to get this to load for hours now. Thanks in advance for any advice!

Hi,
Thank you for contacting Excel IT Pro Discussions Services.
From your description, I understand that you encountered the following error when trying to install Office 2010:
"The language of this installation package is not supported by your system"
If there is any misunderstanding, please feel free to let me know.
Please check if this blog helps:
http://blogs.technet.com/b/jks/archive/2009/04/23/how-to-fix-the-error-the-language-of-this-installation-package-is-not-supported-by-your-system-during-office-products-installation.aspx
If anything is unclear or if there is anything I can do for you, please feel free to let me know.
Best Regards,
Sally Tang

How to cancel Office 2010 message

I have a notebook and desktop computer and I use Windows Microsoft Office 2007, running Word, Excel, Publisher, Access etc, on both notebook and desktop computers with Norton 360
antivirus, both have used this system for the last 4 years.
Both computers came preloaded with Microsoft Office 2010 starter for Word and Excel which have never been used on either computer.
For the last couple of weeks every time I try to open any document on the notebook (this does not happen on the desktop) from Outlook Express I get a Microsoft 2010 message saying ‘the Office product needed to open this file is not installed’ and offers
3 solutions: Activate office 2010; go online and purchase Office 2010; Try Office 2010 free for a limited time.
I have not used any of those options as I do not want to use Office 2010 and wish to continue with Office 2007, however there is no option to do so.
I can access Office 2007 manually on the computer but cannot open any document emailed or available online. How do I get rid of this notice coming up and be able to use 2007 which has worked well for the previous years?

Are you looking on the screen that lists the folders, like Inbox, Drafts, Sent Mail, etc? If there is not an email that is waiting/trying to be sent, the Outbox does not show up. But if there is an email that can't be sent or is in process of being sent, the Outbox shows up. (I just put my iPhone on Airplane mode with wifi off, to test it out, creating an email and clicking on send)

Bex Ajust Query Warning message

Hi,
When I run by bex report in browser I get the message
"Characteristic XXX was changed in infocube ABC.Adjust the query"
I retransported the query but no change.
How do I adjust the query?

Hi,
You Can Regenerate the Query in RSRT, give the query name, environment menu - Generate queries
or else You can supress this warning message in RSRT, if that message exists in the list.
Regards
Sreekanth

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

I created a spreadsheet using Microsoft office 2010 Excel. When I open the sheet using Numbers, the formatting changes. How do I fix this?

If you plan to share or work with people who regulary use MS Excel you should not try to use this in Numbers. You will have constant problems with how each program translates the formatting.
If you want to use Numbers, use it exclusively. If it is for your job use the tool your company uses.

Windows 7 ffox 1.6.16 installed office 2010 intimated cannot open link outlook firefox default browser, firefox will not initiate at all. Have to restart to get any response from firefox which then works but it crashes again. No error message

Windows 7, firefox 1.6.16 just installed office 2010, sometimes cannot open a link in outlook and firefox is my default browser, and firefox will not initiate at all. Have to restart computer to get any response which then works but after a while it crashes again. Was this due to an update or office 2010 has a hidden setting somewhere? Why would firefox crash without any message? Intimated consuming

I have had a similar problem with my system. I just recently (within a week of this post) built a brand new desktop. I installed Windows 7 64-bit Home and had a clean install, no problems. Using IE downloaded an anti-virus program, and then, because it was the latest version, downloaded and installed Firefox 4.0. As I began to search the internet for other programs to install after about maybe 10-15 minutes my computer crashes. Blank screen (yet monitor was still receiving a signal from computer) and completely frozen (couldn't even change the caps and num lock on keyboard). I thought I perhaps forgot to reboot after an update so I did a manual reboot and it started up fine.
When ever I got on the internet (still using firefox) it would crash after anywhere between 5-15 minutes. Since I've had good experience with FF in the past I thought it must be either the drivers or a hardware problem. So in-between crashes I updated all the drivers. Still had the same problem. Took the computer to a friend who knows more about computers than I do, made sure all the drivers were updated, same problem. We thought that it might be a hardware problem (bad video card, chipset, overheating issues, etc.), but after my friend played around with my computer for a day he found that when he didn't start FF at all it worked fine, even after watching a movie, or going through a playlist on Youtube.
At the time of this posting I'm going to try to uninstall FF 4.0 and download and install FF 3.6.16 which is currently on my laptop and works like a dream. Hopefully that will do the trick, because I love using FF and would hate to have to switch to another browser. Hopefully Mozilla will work out the kinks with FF 4 so I can continue to use it.
I apologize for the lengthy post. Any feedback would be appreciated, but is not necessary. I will try and post back after I try FF 3.16.6.

Office 2010 BEx warning message Worksheet BExReporsitory Sheet is protecte

Similar Messages

Maybe you are looking for