Office 2013 Installation stuck on Windows 8.1 ESXi virtual machine

When I try to install Office 2013 32 Bit - on a Windows 8.1 64 Bit Virtual Machine that is hosted on ESXi Host server .....it stucked installing it for hours and hours without finishing ....... I tried to install locally on a mounted ISO image with the same
result !!
It happens on many machines not a specific one !
Does any one know what can be a reason for that ?!
Hossam Wael Elmosallamy (IT Support Engineer-ECC Solutions) MCSE - CCNA [email protected] Mobile:(011)-49464671 www.eccsolutions.net "Experience Reliability&quot

Hi,
At which specific percentage will the setup hang? Vuk is right above, but it's really hard to say what's the cause of your case.
Please first take a look at this KB article and see if it is helpful for you:
Microsoft Office 2013 or Office 365 hangs during setup
I would suggest you go and check the setup log files to troubleshoot the issue, which is the best way to narrow down the issue I think.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.

Similar Messages

Office 2013 + Terminal Server Environment + Windows Server 2012 R2

- Problems with Office 2013 (excel & Word) when use Roaming Profile (By Citrix) and folder redirection.
Environment:
2 x Windows Server 2012 R2 with Terminal Services installed and Office 2013 Professional Plus. Also this server are memeber of environment of Citrix XenDesktop 7.1
Problem:
In two servers I have installed Office 2013 Proffesional Plus and I have try to access to excel by Citrix.
When I open excel with roaming profile (by citrix) activated, when I began to write I get a pop-up with the message:
"Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space"
And when I try to save the document I get the same message, and excel "crash" and closed.
If I stop the roaming profile service. All works properly.
The tests that I had made were:
- Change DCOM config with correct permission.
- Repair Office 2013 Installation.
- Disable Protected Mode.
Anybody could help me???
Thanks in advance !!!

Just searched a littler bit on this, below links might be helpful:
http://howtoconfig.org/windows/excel-not-enough-available-memory-or-disk-space-available/
http://social.technet.microsoft.com/Forums/office/en-US/2c753037-4600-4a4f-abd7-d228e2f20a38/2146827284microsoft-excel-cannot-open-or-save-any-more-documents-because-there-is-not-enough?forum=officesetupdeployprevious
http://kb.jetreports.com/article/AA-00914/0/Microsoft-Excel-cannot-open-or-save-any-more-documents.html
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders and modify the key Cache with a valid path (ie: C:\Windows\Temp ).
Hope this helps.

Office 2013 fails to activate from KMS host when Office 2013 is installed on windows 8.1 and the KMS is hosted on server 2008 r2

Any attempt to activate Office 2013 installed on a windows 8.1 computer fails with a "licence key is invalid" message when the KMS is installed on a server running windows 2008 R2. I've installed KB2885698 and VAMT 3.1 but this has made no difference.
Office 2013 installed on earlier windows versions activates fine.
Help!

Yes to both your questions. It works fine for 2013 on 2008R2 RDP or windows 7 clients just fails for Office 2013 on 8.1
cscript slmgr.vbs /dlv all gives:
Name: Office 15, OfficeStandardVL_KMS_Client edition
Description: Office 15, VOLUME_KMSCLIENT channel
Activation ID: b13afb38-cd79-4ae5-9f7f-eed058d750ca
Application ID: 0ff1ce15-a989-479d-af46-f275c6370663
Extended PID: 06401-02179-000-000003-03-2057-9600.0000-1622014
Product Key Channel: Volume:GVLK
Installation ID: 193642040083969886643530072138413824685925636973063584722160886
Partial Product Key: 92CD4
License Status: Notification
Notification Reason: 0xC004F056.
Remaining App rearm count: 3
Remaining SKU rearm count: 3
Trusted time: 18/07/2014 08:38:07
Configured Activation Type: All
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
ok, other than the status/reason, this looks kind of ok at the KMSclient end of things.
Check that this KMSclient is contacting the correct/expected KMShost. (do you have more than one KMShost??)
Check at the KMShost that this KMSclient is contacting it, and, look for the correlating events on the KMShost, to see what the KMShost thought about the activation request.
For tips on understanding the events for SPPsvc / SLSsvc:
http://technet.microsoft.com/en-us/library/ee939272.aspx
http://technet.microsoft.com/en-us/library/cc303695.aspx#_KMS_Events_Logged
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!)

Setup Microsoft Office 2013 KMS Host on Windows Server 2008 R2

Hi all,
hope someone can help, banging my head against a brick wall here.
Followed this excellent article here -
http://blogs.technet.com/b/odsupport/archive/2013/01/03/how-to-setup-microsoft-office-2013-kms-host-on-windows-server-2008-r2.aspx#pi47623=1
Dont need to install 275817 as its already applied to the server that has the KMS install on it.
When i get to step 3 and double click the exe from the MSDL site i get the cscript window but nothing happens, the window stays blank and then closes, i never get the prompt to enter the licence key for Office 2013 KMS key.
Its a Windows server 2008 R2 install, fully patched and rebooted.
Checked the logs and can find nothing, has anyone seen this or know a fix?
Thanks in advance.

Hi,
Thanks for your post.
Please refer to this MS article and try again.
Prepare and set up the Office 2013 KMS host
https://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_PreparetheKMSHost
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion?

Hello. Will I be able to run Windows XP on a virtual machine (such as VirtualBox) in Mountain Lion? Currently, I have a Late-2009 MacBook with Snow Leopard, and I am planning on installing VirtualBox and Windows XP soon, then I'm planning on upgrading to Mountain Lion afterwards. Thanks.

Yes.

Backing up Windows Server 2012 R2 Virtual Machine

When I try to back my Windows Server 2012 R2 Virtual machine up to a NAS, using the Windows Server Utility I get the following errors:
There was a failure in preparing the backup image in one of the volumes in the backup set.
Detailed error: The process can not access the file because another process has locked a portion of the file.
When viewing the errors in Event viewer I get the following error:
The backup operation that started at '‎2014‎-‎03‎-‎12T10:23:08.681735200Z' has failed with following error code '0x807800C5' (There was a failure in preparing the backup image of one of the volumes in the backup set.). Please review the event details for
a solution, and then rerun the backup operation once the issue is resolved.
Any help will be appreciated.
Regards
Louis

Have a look, check whether the solution is working for you.
http://answers.microsoft.com/en-us/windows/forum/windows_8-performance/windows-8-backup-error-code-0x807800c5/0ec7fea0-bb4d-44d2-9381-c364ef2c1f6c
Regards,
Rafic
If you found this post helpful, please give it a "Helpful" vote.
If it answered your question, remember to mark it as an "Answer".
This posting is provided "AS IS" with no warranties and confers no rights! Always test ANY suggestion in a test environment before implementing!

Internet windows with hype-v virtual machine on ndows 8.1

Hello to all the community technical preview
of Windows 10, use
windows 8.1, I installed
Windows 10 technical preiew in
the management console of
hyper-v in windows 10
install I am asked Which
connection to use, if
no connection or use of the
hyper-v, ch II to
hyper-v.
Once you install the system
from gaming operations,
the launch bar on the right where 'is
the internet connection, it tells
me undefinited network connection
and under limited with a yellow
exclamation point.
how do I connect to the
internet when you finish have installed
Windows 10 on a virtual machine
hyper-v?

You probably need to configure which NIC to use for your VM. Refer to this guide: http://technet.microsoft.com/en-us/library/gg610603.aspx to configure networking in a Hyper-V VM.

Office 2013 Installer - Fails with No Errors

Hello,
I ran into issues on two different Windows 8 (64-bit) machines today, both with Office 2013 Pro Plus (32-bit) installed. I could not get the installer to come up to add a module (or make any other changes).
On one of the PCs, I tried running the Fixit to remove Office, since the option of the "Online Repair" was not accessible, (installer would not start). Fixit removed Office, but after a reboot, it still would not run the office installer, even
with Office 2013 completely gone.
Things I tried:
- Disabled anti-virus (windows defender)
- Run with elevated privileges (I'm a domain admin and UAC is off, but just to be safe)
- Removed skydrive
- Cleaned out temp directory
- Scanned for registry errors (none)
- Re-downloaded the installer DVD
- Made sure no pending windows update
- Reboots (lots of times, definitely after the uninstall)
- Checked the install log in %temp%, this is what I get:
2013/08/12 13:51:14:263::[2848] PERF: TickCount=1295931 Name=OBootStrapper::Run Description=Begin function
2013/08/12 13:51:14:264::[2848] Operating System version: 6.2.9200 . Platform ID: 2
2013/08/12 13:51:14:264::[2848] Running 32-bit setup on a 64-bit operating system.
2013/08/12 13:51:14:264::[2848] Command line: "F:\SETUP.EXE"
2013/08/12 13:51:14:264::[2848] No command line arguments given
2013/08/12 13:51:14:513::[2848] Verify file signature in "F:\SETUP.EXE"
2013/08/12 13:51:14:562::[2848] F:\SETUP.EXE is trusted.
2013/08/12 13:51:14:562::[2848] Verify file signature in "F:\proplus.ww\OSETUP.DLL"
2013/08/12 13:51:14:598::[2848] F:\proplus.ww\OSETUP.DLL is trusted.
2013/08/12 13:51:14:612::[2848] Using setup controller dll at [F:\proplus.ww\OSETUP.DLL].
2013/08/12 13:51:14:612::[2848] PERF: TickCount=1296274 Name=OBootStrapper::Run Description=Calling RunSetup
This is almost identical to what I see on the other PC, except with different drive letters.
THERE ARE NO ERROR MESSAGES - no popup, no installer dialog - nothing, which makes it really hard to troubleshoot. And it's happening on both Windows 8 machines that have had Office 2013 installed. I am so frustrated right now after wasting half of today
troubleshooting this.
Any thoughts?

Hi
Let’s follow these steps:
Make sure you have end the tasks of setup.exe and integratedoffice.exe.
   1. Press the Ctrl + Alt+ Delete key -> Click on Task Manager to open.
   2. Under Processes tab -> Select setup.exe -> Click on End Process.
    3. Under Processes tab -> Select integratedoffice.exe -> Click on End Process.
  Restart the computer in Clean Boot and install Office 2013. Follow the steps:
       http://support.microsoft.com/kb/929135
   Note: After you have finished troubleshooting in clean boot, ensure you restart the computer in normal mode.
In addition, you can also refer to the following link to try more methods:
http://support.microsoft.com/kb/2822317/en-us
Regards

HP Laserjet P1102 does not print following Office 2013 installation

Hi
The computer was upgraded to Office 2013 last week. Since then the HP Laserjet P1102 printer doesn't work.
It appears that whatever drivers are installed onto the computer are then over-ridden by the printer's own drivers, which creates multiple icons of the printer with errors. None of them work. It also seems to be trying to install as an external CD unit.
We have had all the computer drivers removed and re-installed, we've checked that the correct drivers are installed, we've changed the lead, changed the printer for one of exactly the same model, gone through all the HP on line assistance. Hours and hours have been spent on this problem both remotely and hands on by IT knowledgeable people in the last couple of days and no-one can identify a resolution.
Ideas please?
Thanks

Hi@JG11 ,
I see by your post since upgrading to Office 2013, you can no longer print. I would be happy to help you, but I will need some more information.
Try turning off the Smart Install from the CD: On the Windows computer, go to start, computer, right click the CD for the
printer and left click open in new window, go to util/siutility.exe/HP smart install utility.
Shows printer or PC - select printer.
Then click disable.
(printer has automatic installation feature when connected to a computer by a USB cable)
Are you having this issue from all applications or just the Office 2013 software?
Download and run the Print and Scan Doctor. It will diagnose the issue and might automatically resolve it. http://www.hp.com/go/tools>Using HP Diagnostic Tools for HP Printers in Windows.
Run all the Windows Updates.
The application you are using might require the printer to be set as the default printer and probably doesn't have the ability to search for other printers. Close the application. Set the printer as the default printer. From Devices and Printers, right click the printer, left click set as default.
Restart the computer.
Open the application and make sure the application is set to the proper printer name.
Try printing again.
I have provided a URL on issues with printing in Word if the issue persists. How to troubleshoot printing problems in Word.
How is the printer connected? (USB/Wireless)
What were the results when you ran the Print and Scan Doctor? (did it print or scan, any error messages)
What operating system are you using? How to Find the Windows Edition and Version on Your Computer.
If there is anything else I can help you with, just let me know.
Have a nice day!
Thank You.
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
Gemini02
I work on behalf of HP

Lenovo G560 and Office 2013 installation problems.

I recently acquired a copy of Office 2013 and I upgraded my office 2010 to 2013. However, I get a response that some office packages could not open because set up could not find or validate an installition file. Please try reinstalling office from the installation source, or if you installed from a downloaded package, please redownload and reinstall. I have tried severally to reinstall but still facing the same problem. The only Office 15 package that work is Powerpoint. Im running Office on a Lenovo G560 core i3 processer, 3GB RAM and 320 HDD. The Office 15 package is OFFICE 2013 VL. Please help. I am desperate. Please help.

hi onyanchaerick,
If the above procedure doesn't work, you can also try to:
1. Fully remove MS Office 2010 by following this or this guide.
2. If you have an Office Professional Plus 2013, download a trial version here, then activate it with your full version product key.
Goodluck!
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Office 2013 Apps and "Phantom" Windows in Taskbar

After uninstalling Office 2010 and installing Office 2013, all of the Office applications are showing multiple windows in the taskbar for opened context menus in the app. I thought it had something to do w/ Visual C++ runtime conflicts having 2008
and 2010 installed, so I uninstalled everything but C++ 2010 Redistributable to no avail.
Windows 7
Office 2013 RTM

Hi,
Try the following steps to check:
Kill the explorer.exe
Rename this registry key to remove the registry values that store the pinned icon references.
HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Taskband
Rename this folder that stores the cached shortcuts for pinned items (otherwise repinning will result in shorcuts with names like "Outlook (2)"):
%APPDATA%\Microsoft\Internet Explorer\Quick Launch\User Pinned\TaskBar
Restart explorer.exe and there should be nothing pinned.
If you have any feedback on our support, please click
here
Jaynet Zhang
TechNet Community Support

Microsoft Office 2013 Not Compatible with Windows 8.1??

I have a customer that I recently installed Office 2013 onto their brand new Asus Q550. The entire setup went very well but after 2 hours of use with Outlook, the service just stopped. Curiously I went to Word, same thing! Anyone else having this problem
on their 8.1 device? If so.. Whats the fix???

Hello,
I have been with Microsoft tech support and connected remotely with our machine. After 2 hours of trying, she finally gave up and asked me if I am already an Assured
member? This way they can help me thoroughly with my problem. I have to pay an amout, so they can help me fix it? I just told her that I will just have to fix it myself.
These computers are brand new and we bought 5 licenses of Office 2013. It only happened when I updated from Windows 8 to 8.1. It was working fine with Windows 8, but
when I updated the machines to 8.1 it stopped all our MS Office 2013 to work.
After a thorough research I was able to fix the problem with all our machines. This
problem has been seen to be caused by certain versions of the third-party DisplayLink User Mode Driver (dlumd32.dll), specifically versions of the dlumd32.dll file lower than 8.7.x.
You need to download and install the latest Display Link Software at http://www.displaylink.com/support/downloads.php

Office 2013 H&S in windows 10

I have preinstalled Office 2013 H & S version in my acer aspire switch 10 and here's my question: will I be able to run it after windows 10 update ? I know that office 2016 will bo for free for 10'1 but I can't wait till autumn.

I'm not sure I understand you: if I update it with this "get windows 10" option,office will be still on my laptop,right?

Office 2013 installation issues

I had an Office 365 subscription on my computer and then i got a license for office 2013 standard (volume licensing) for work purposes though still using the same laptop.
I have uninstalled the 365 but i am not able to install either the 64 or 32 bit version of the software on my 64bit machine.
I have tried all the Fixits to no avail.
Can someone pls help with this?

Hi,
Would you please detail "i am not able to install either the 64 or 32 bit version of the software on my 64bit machine" a little bit? What's the symptom?
If there's any error message please let me know.
You can try installing in Clean Boot Mode, this determines if this is background programs related:
http://support.microsoft.com/kb/929135
Regards,
Melon Chen
TechNet Community Support

ISight Camera on Windows Xp as a virtual machine in Virtual Box

I'm using Virtual Box to run Windows Xp in my MacBook Pro. I have been trying to have a video conference through Messenger but iSight is not being recognized. I've gone through the process of installing the Guest Additions and there I've selected iSight. But when windows try to install the new detected hardware, does not find any driver for iSight. Has anyone been lucky to make iSight Camera work properly under this environment? I've gone to Virtual Box forum and I haven't found any positive answer.
Message was edited by: RudyGomez

You’re absolutely right. I installed the Skype program in Mac OS X directly and not in any virtual machine. I forgot to say this. I’m using Virtual Box of Sun Microsystems as the virtualization software and not Parallels neither VMware Fusion neither BootCamp. I went to Virtual Box forums and there is not solution for the moment to make it work the iSight Camera because there is not a driver. Anyway I tried to get the driver from the installation disk that you told me but the Windows virtual machine does not catch the DVD by any means, I tried in different ways and not one worked. Besides I read that the drivers that comes with the installation DVD only works for Boot Camp. I’m not at all an expert on this.
In spite that now I can have a videoconference with my Windows’ friends and relatives, I’m still waiting for the proper solution to the iSight driver in Virtual Box.
Thanks a lot for your suggestion.

Office 2013 Installation stuck on Windows 8.1 ESXi virtual machine

Similar Messages

Maybe you are looking for