Office 2013 + Terminal Server Environment + Windows Server 2012 R2
- Problems with Office 2013 (excel & Word) when use Roaming Profile (By Citrix) and folder redirection.
Environment:
2 x Windows Server 2012 R2 with Terminal Services installed and Office 2013 Professional Plus. Also this server are memeber of environment of Citrix XenDesktop 7.1
Problem:
In two servers I have installed Office 2013 Proffesional Plus and I have try to access to excel by Citrix.
When I open excel with roaming profile (by citrix) activated, when I began to write I get a pop-up with the message:
"Microsoft Excel cannot open or save any more documents because there is not enough available memory or disk space"
And when I try to save the document I get the same message, and excel "crash" and closed.
If I stop the roaming profile service. All works properly.
The tests that I had made were:
- Change DCOM config with correct permission.
- Repair Office 2013 Installation.
- Disable Protected Mode.
Anybody could help me???
Thanks in advance !!!
Just searched a littler bit on this, below links might be helpful:
http://howtoconfig.org/windows/excel-not-enough-available-memory-or-disk-space-available/
http://social.technet.microsoft.com/Forums/office/en-US/2c753037-4600-4a4f-abd7-d228e2f20a38/2146827284microsoft-excel-cannot-open-or-save-any-more-documents-because-there-is-not-enough?forum=officesetupdeployprevious
http://kb.jetreports.com/article/AA-00914/0/Microsoft-Excel-cannot-open-or-save-any-more-documents.html
Go to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\User Shell Folders and modify the key Cache with a valid path (ie: C:\Windows\Temp ).
Hope this helps.
Similar Messages
-
Setup Microsoft Office 2013 KMS Host on Windows Server 2008 R2
Hi all,
hope someone can help, banging my head against a brick wall here.
Followed this excellent article here -
http://blogs.technet.com/b/odsupport/archive/2013/01/03/how-to-setup-microsoft-office-2013-kms-host-on-windows-server-2008-r2.aspx#pi47623=1
Dont need to install 275817 as its already applied to the server that has the KMS install on it.
When i get to step 3 and double click the exe from the MSDL site i get the cscript window but nothing happens, the window stays blank and then closes, i never get the prompt to enter the licence key for Office 2013 KMS key.
Its a Windows server 2008 R2 install, fully patched and rebooted.
Checked the logs and can find nothing, has anyone seen this or know a fix?
Thanks in advance.Hi,
Thanks for your post.
Please refer to this MS article and try again.
Prepare and set up the Office 2013 KMS host
https://technet.microsoft.com/en-us/library/dn385356.aspx#BMK_PreparetheKMSHost
Regards.
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected] -
Is office 2010 officially supported on windows server 2012 R2
hello,
can someone tell me if office 2010 is officially supported on windows server 2012 R2 RDS?
This link only talks about Windows server 2012 not R2.
Thanks in advance.
Regards
AnthonyHi Anthony,
I successfully installed Microsoft Office Professional Plus 2010 on Windows Server 2012 R2 before in my testing environment.
So yes, Office 2010 is supported on Windows Server 2012 R2.
Regards,
Ethan Hua
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. -
Exchange Server 2013 SP1 Install on Windows Server 2012 R2
I am trying to install Exchange 2013 SP1 onto a Windows Server 2012 R2. I get an error message that the operating system is not supported. I have installed all the prerequisite.
Does that mean that you can't install Exchange 2013 Sp1 with a Remote Desktop Role together included with Server 2012 R2?
Or is it possible to restore the Remote Desktop Role afterwards?
You can't install any build of Exchange 2013 on any server that has the RDS Role installed. So in other words, this is not a "limitation" with Exchange 2013 SP1 and Windows Server 2012 R2.
Additional Reading, check out: Exchange OWA/Activesync conflicting with RD Gateway
role
Martina Miskovic -
Biztalk Server 2013 does not support Windows Server 2012 R2
is there any document or statement from MS that States "Biztalk Server 2013 does not support Windows Server 2012 R2"
Hi Mohit,
I haven't come across any document, but there is a blog from Microsoft about it.
http://blogs.msdn.com/b/biztalknotes/archive/2013/10/29/biztalk-2013-compatibility-with-latest-platforms-of-microsoft.aspx
Maheshkumar S Tiwari|User Page|Blog|BizTalk
Server : How Map Works on Port Level -
Any attempt to activate Office 2013 installed on a windows 8.1 computer fails with a "licence key is invalid" message when the KMS is installed on a server running windows 2008 R2. I've installed KB2885698 and VAMT 3.1 but this has made no difference.
Office 2013 installed on earlier windows versions activates fine.
Help!Yes to both your questions. It works fine for 2013 on 2008R2 RDP or windows 7 clients just fails for Office 2013 on 8.1
cscript slmgr.vbs /dlv all gives:
Name: Office 15, OfficeStandardVL_KMS_Client edition
Description: Office 15, VOLUME_KMSCLIENT channel
Activation ID: b13afb38-cd79-4ae5-9f7f-eed058d750ca
Application ID: 0ff1ce15-a989-479d-af46-f275c6370663
Extended PID: 06401-02179-000-000003-03-2057-9600.0000-1622014
Product Key Channel: Volume:GVLK
Installation ID: 193642040083969886643530072138413824685925636973063584722160886
Partial Product Key: 92CD4
License Status: Notification
Notification Reason: 0xC004F056.
Remaining App rearm count: 3
Remaining SKU rearm count: 3
Trusted time: 18/07/2014 08:38:07
Configured Activation Type: All
Please use slmgr.vbs /ato to activate and update KMS client information in order to update values.
ok, other than the status/reason, this looks kind of ok at the KMSclient end of things.
Check that this KMSclient is contacting the correct/expected KMShost. (do you have more than one KMShost??)
Check at the KMShost that this KMSclient is contacting it, and, look for the correlating events on the KMShost, to see what the KMShost thought about the activation request.
For tips on understanding the events for SPPsvc / SLSsvc:
http://technet.microsoft.com/en-us/library/ee939272.aspx
http://technet.microsoft.com/en-us/library/cc303695.aspx#_KMS_Events_Logged
Don
(Please take a moment to "Vote as Helpful" and/or "Mark as Answer", where applicable.
This helps the community, keeps the forums tidy, and recognises useful contributions. Thanks!) -
Backup Windows Server on Windows Server 2012
We install backup windows server on windows server 2012 standard, more when I go in tools to be able to manage it he is not there, try the Wbadmin.msc command, and returns me a message that Windows can not find the Wbadmim.msc . Have uninstalled and reinstalled
feature several times and still nothing.
I am new to the forum, so descupem me if there is another topic like this.Hi There,
Have you tried to search for "Administrative Tools" and run the "Windows Server Backup" from there?
Good Luck -
Can't open office files located on a windows server fileshare
Hi TechNet / Office for Mac Community,
re: can't open MS Office files located on a windows server file share
Is anyone else experiencing this issue and/or have a fix?
Details:
Clients: Mac OS X 10.6 / 10.7 / 10.8 / 10.9
File share: Windows Server 2008 R2
Connecting via SMB or CIFS
Problem:
When mounting the Windows Server file share, Mac clients are unable to open MS Office 2011 files (not just powerpoint) from that location.
Error message: "there was an error accessing /Volumes/data/folder/presentation.pptx"
There is no issue creating or deleting MS Office files from that location.
The Mac 'Preview' application is able to open the same MS Office file without issues.
The file is not corrupted and can be opened when copied to the desktop.
Windows clients have no problem opening the file.
Only this particular file share is having an issue.
Are there any known issues or requirements for Windows Server file shares and MS Office 2011 that would apply to this problem?
Your assistance is greatly appreciated.WebPhoenix, recommend you post this question here instead:
http://answers.microsoft.com/en-us/mac
Thanks,
Mike
Unfortunately your post is off topic here, in the TechNet Site Feedback forum, because it is not Feedback about the TechNet Website or Subscription. This is a standard response I’ve written up in advance to help many people (thousands, really.)
who post their question in this forum in error, but please don’t ignore it. The links I share below I’ve collected to help you get right where you need to go with your issue.
For technical issues with Microsoft products that you would run into as an
end user of those products, one great source of info and help is
http://answers.microsoft.com, which has sections for Windows, Hotmail, Office, IE, and other products. Office related forums are also here:
http://office.microsoft.com/en-us/support/contact-us-FX103894077.aspx
For Technical issues with Microsoft products that you might have as an
IT professional (like technical installation issues, or other IT issues), you should head to the TechNet Discussion forums at
http://social.technet.microsoft.com/forums/en-us, and search for your product name.
For issues with products you might have as a Developer (like how to talk to APIs, what version of software do what, or other developer issues), you should head to the MSDN discussion forums at
http://social.msdn.microsoft.com/forums/en-us, and search for your product or issue.
If you’re asking a question particularly about one of the Microsoft Dynamics products, a great place to start is here:
http://community.dynamics.com/
If you really think your issue is related to the subscription or the TechNet Website, and I screwed up, I apologize! Please repost your question to the discussion forum and include much more detail about your problem, that could include screenshots
of the issue (do not include subscription information or product keys in your screenshots!), and/or links to the problem you’re seeing.
If you really had no idea where to post this question but you still posted it here, you still shouldn’t have because we have a forum just for you! It’s called the Where is the forum for…? forum and it’s here:
http://social.msdn.microsoft.com/forums/en-us/whatforum/
Moving to off topic.
Thanks, Mike
MSDN and TechNet Subscriptions Support -
Windows server 2012 as primary DC and DNS server and windows server 2003 as secondary DC and DNS
Migration from windows server 2003 AD DC and DNS server to windows server 2012 R2,
Cannot I set up Windows server 2012 R2 as primary DC and DNS , windows server 2003 as secondary DC and DNS ? (for backup server when server 2012 fail, user can continue to login and access internet services)You can mix both as long as your Forest and Domain Functional level are Windows Server 2003. However, I would like to bring your attention to this blog about known problems when mixing DCs with Windows Server 2003 and 2012 R2 OS:
http://blogs.technet.com/b/askds/archive/2014/07/23/it-turns-out-that-weird-things-can-happen-when-you-mix-windows-server-2003-and-windows-server-2012-r2-domain-controllers.aspx
This posting is provided AS IS with no warranties or guarantees , and confers no rights.
Ahmed MALEK
My Website Link
My Linkedin Profile
My MVP Profile -
Integrate On-Premises Exchange Server With Windows Server Essentials
I have Exchange Server 2013 installed on Win Server 2012 R2 joined to Windows Server Essentials domain. Attempting to integrate the Exchange Server into the Essentials domain from the Essentials Dashboard using the wizard fails with the error, "Cannot
locate an Exchange Server on the network. Make sure that your Exchange Server is setup and that it is connected to the network". I can communicate with the server in multiple ways from the Essentials Server and other computers on the domain. Mail
flow in and out of the Exchange Server works without issue. I can use the various management tools to administer the Exchange Server. The only task I cannot complete is integrating it into the Essentials environment which I need to do to move on
to creating user mailboxes for user accounts setup in AD.
All research to date has come up empty handed.
Help!Hi RSUL,
Any update?
On current situation, would you please let me confirm something more? It may help me to understand this issue
clearly.
Would you please let me know how join the Windows Server 2012 R2 (which had been installed Exchange Server 2013) to Windows Server Essentials domain? Did use Connector software
(type http://servername/connect)?
On server essentials, please open Dashboard and navigate to DEVICES. Then check the Status of this server which had been installed Exchange Server 2013.
Currently, the Services Integration features, including on-premises Exchange integration, are only supported in a single domain controller environment. Meanwhile, the integration
wizard must be run on a domain controller.
In addition, please refer to the following article and check if can help you.
On
Premises Exchange Integration Windows Server 2012 Essentials
Integrate an On-Premises Exchange Server
with Windows Server Essentials
By the way, please check Event Viewer and some relevant logs if you can find some more clues.
Hope this helps.
Best regards,
Justin Gu -
How to Migrate windows 2008r2 RDS server to Windows server 2012r2 RDS
Hi, I want to migrate our 2008r2 RD server + Cals to windows server 2012r2 server, the user will still connect to 2008r2 server but the server hosting the license will be migrated to a 2012r2 server. Currently I have 2 servers that users can connect
to that are served by the 2008r2 RDS (the server I'm converting is just hosting the license) the server user connect to point to this license server. How do I proceed to migrate, I'm searching for documentation but I can't find much, I found that I can only
convert to 2012r2 from 2012 or better OS, so I installing a temporary 2012 server to do a double migration seem to be the best course of action but I can't find any documentation on how to Migrate the Remote Desktop Services Role Services from 2008r2 to Windows
Server 2012.
Also I just discovered that this server is also hosting license for windows server 2003 terminal service. Will I be able to host these licences on 2012R2 ?
Any pointer would be appreciated.Hi,
It seems like migration the Remote Desktop Services Role Services from 2008r2 to Windows Server 2012 is not supported.
http://technet.microsoft.com/library/dn479239.aspx
So i think you may install and configure the RDS server on Windows Server 2012 and then migration to Windows Server 2012r2.
Hope this helps.
Regards.
Vivian Wang -
Error when configuring Siebel Server in Windows server 2003
Hi
I am getting below error when configuring Siebel server in Windows server 2003 VM. All the ODBC connections and SADMIN user id & password and gateway host name and port everything correct. Able to ping and telnet to gateway port 2320. Please help on how to overcome this situation....
2021 2012-03-08 01:13:22 0000-00-00 00:00:00 -0500 00000000 001 003f 0001 09 sw_cfg_util 3940 3332 C:\sba81\siebsrvr\log\sw_cfg_util.log 8.1.1 SIA [21111] ENU
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 Error in transferring input values ,num of arrays incorrect 0, expected : 1
GenericLog GenericError 1 000000024f580f64:0 2012-03-08 01:13:22 TransferInputsToValues returned error:3611539 to SetControlValues
GenericLog GenericError 1 000000024f58096c:0 2012-03-08 01:13:33 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 NSS - ErrCode 4597527 SysErr 0
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 Validation failed : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃
GenericLog GenericError 1 000000034f58096c:0 2012-03-08 01:13:35 ValidateFailed for Gateway Name Server TCP/IP Port, error : C028: Unable to connect to the Siebel Gateway Name Server ῤ粃䂬粃呸 ֓呸 ֓㷕粃Ꞡ粈㶻粃Please check Doc ID 1391312.1 on support.oracle.com, this article has a list of possible causes and resolutions for the error messages you are receiving.
Hope it helps,
Wilson -
Error Installing InDesign CS3 Server on Windows Server 2008 R2 64BIT
Hello there-
I'm trying to install InDesign CS3 Server on Windows Server 2008 R2 64BIT (x64) Edition, however, we get a failure indication on the installer. Before, we have installed it properly on Windows Server 2008 R2 32BIT (x32) but some how we cannot proceed on a x64 box.
Is there any limitation on this sense? Any documentation about it?
Thanks and appreciate your answers.
Regards,
Gustavo Ortega
Software EngineerHello,
Have you followed these recommendations from the installation guide ( Installation Guide u2013 SAP Content Server on Windows 2008 ) :
Note: In the IIS 7.0/7.5, all the roles are not selected during the installation by default,
Please make sure all the below roles are included and IIS 7.0/7.5 is installed.
Roles needed in IIS 7.0/IIS 7.5.
Common HTTP Features
Static Content
Default Document
Directory Browsing
HTTP Errors
HTTP Redirection
Application Development
ISAPI Extensions
ISAPI Filters
Health and Diagnostics
HTTP Logging
Logging Tools
Request Monitor
Tracing
Custom Logging
ODBC Logging
Security
Basic Authentication
Windows Authentication
Request Filtering
Note : Anonymous Authentication should be enabled.
Performance
Static content Compression
Dynamic Content Compression
Management Tools
IIS Management Console
IIS Management Scripts and Tools
Management Service
IIS 6 Management Compatibility
IIS 6 Metabase compatibility
IIS 6 WMI Compatibility
IIS 6 Scripting Tools
IIS 6 Management Console
Note: There is a File Upload limitation in IIS 7 on Windows 2008 Server, IIS will reject any file that is
larger than 30 MB. This is a default limitation of IIS. You can increase the maximum file size by
setting the parameter maxAllowedContentLength in the file ApplicationHost.config.
The following command can be used to set the parameter from the command prompt, please
change the directory to Windows\System32\inetserv and then execute the command.
appcmd setconfig /section:requestFiltering/requestLimits.maxAllowedContentLength:150000000
The value is only an example, in this case the upload limit is set to 150MB.Server has to be restarted
after execution of this command.
Also, are you using Maxdb to store the files or is it a "flat files" content server ?
HTH.
Steve. -
Problem instaliing sun one LDAP server on windows server 2008 r2
Hi all ,
I am trying to install Ldap server (Sun ONE Directory Server) on windows server 2008
I am using apache-tomcat-7.0.28 and java jdk1.7.0_05
I am following this manual for installing :
https://blogs.oracle.com/marginNotes/entry/installing_directory_server_enterprise_edition1
I have a problem with the cacao agent and how to install it .
I've got this error message :
c:\Program Files\Sun\dsee7\bin>dsccsetup cacao-reg
Configuring Cacao...
## Failed to run "c:/Program Files/Sun/dsee7/ext/cacao_2/bin/cacaoadm.bat" set-
aram "jdmk-home=c:/Program Files/Sun/dsee7/lib/private"
#### Cannot create service for instance: [cacao.instance.name].
#### Cannot perform firstime inialisation and configuration.
## Exit code is 1
Failed to configure Cacao.
I stuck and with no other solutions . I hope if you could to help with this issue .
i will glad to know if there is any other ways to install this specific Ldap server ,
Thanks,
AlonYou most likely skipped the step of starting the installed server prior to trying to access admin URL. Please check this document:
http://docs.sun.com/source/817-1830-10/win.html
Relevant section is:
You can start the Administration Server in either of the following ways:
# Select Start Menu -> Programs -> Sun ONE Web Server, and choose Start Web Server Administration Server.
# From the Control Panel�s Services item.
HTH... -
Urgent help needed to setup Forms 6i Server on Windows Server 2003
Hello,
I am trying to install Forms 6i Server from the Forms/Reports 6i Release 2 CD onto a server with Windows Server 2003 Standard Editon (services pack 1) installed.
The Oracle Installer produced the following error when I tried to install the Forms 6i Server From the Forms/Reports 6i Release 2 CD:
user1.pin(20); os_error while spawning ifsrv60 -install forms60server port=9000 mode=socket batch=yes.
Has anyone successfully installed Forms 6i Server from Forms/Reports 6i Release 2 CD onto a Windows Server 2003 server?
Any help is appreciated.
PhilYou it obtained to install the FORMS 6i SERVER in Windows 2003 ?
I am with the same problem and not yet I obtained solution.
Maybe you are looking for
-
Hello Iam creating the Material doc. Captures the excise invoice ,Part1 and part2 was done.....Internal no was there. Now i want to cancel the excise invoice. I have reversed the material document and system was generated the one more material doc. w
-
Extended rebate - change payment values with Badi RBT_ENH_BADI_SETTLE
Dear all I am trying to change payment values for an extended rebate agreement credit memo. According to the documentation it can be done using BADI RBT_ENH_BADI_SETTLE . I am using method BONUS_VALUES_MODIFY , but no values has been changed in the
-
Coloring a field in the internal table
Hi all, How can I color a field in the internal table knowing that I'm developing a classic report. Thanks in advance.
-
Drilldown on BW report with web interface
I have a BW report that I deliver through our portal using web Templates and my question is if our user selects certain filter values can they then save their selections as a VARIANT much like they can do in BW Analyzer? This way the next time the c
-
Need Windows 7 Driver for 6920AB1 Monitor
Hello, My computer was running great until I decided to install windows 7. Same graphics card NVIDIA GeForce 6100, same L192 Wide TFT monitor but now the picture is distorded and I can't find the default resolution setting of 1440x900 on the option b