Office 2013 with OneDrive Desktop sync conflicts

I am using Office 2013, and I am on Windows 8.1 with OneDrive setup. I keep some files Offline and OneDrive syncs it for me which is cool. But when I installed Office 2013, when I edit Excel files, I notice that there's an Uploading to OneDrive message at
the bottom while saving. Then I was prompted with a conflict during the sync. Isn't this because OneDrive is already syncing it and Excel is syncing it again that's why this happening?
How do I disable Excel (or probably Word as well and other apps in Office) to stop saving directly to OneDrive? How do I disable the Office Upload Center that keeps on popping in the System Tray? I am already fine with the sync being done by the OneDrive
Desktop. Previously, there was an option to disable Office sync from the OneDrive Desktop icon in the System Tray, but it is now gone and I couldn't find it anywhere else. Where do I find it now?

To disable/configure this open up the Task Scheduler and click on the
Task Scheduler Library node. You should see a task here labelled
Microsoft Office 15 Sync Maintenance for USERNAME.
Disable the whole trigger (right click and choose disable) or change the Properties of this to amend the trigger that starts the job. For instance, you can delete the trigger that starts on user log on.
The other way is to find MSOSYNC.EXE and OSPPSVC.EXE on Disk C:, delete them:
1. Open task manager and kill MSOSYNC.EXE and OSPPSVC.EXE
2. Search C: for MSOSYNC.EXE and note which one is the actual Office folder, then delete them all
3. Go to the Office folder and create a MSOSYNC.txt file and edit it to put the quit command in it.
4. Rename the file to MSOSYNC.EXE and then change the permissions so the user owns it, and remove all permissions except for the user which should have all except WRITE.
5. Reboot
This method above is like cheating, you can make fake MSOSYNC.EXE and OSPPSVC.EXE so that they can't even run.
Anyway, Microsoft doesn't recommend you disable the Upload center.
-Jeff

Similar Messages

I am running Office 2013. Trying to sync my reminders with my iphone using icloud for windows, but it is not working. Can anyone please help?

I am running Office 2013. Trying to sync my reminders with my iPhone 5c version 7.1.2 using icloud for windows, but it is not working. Can anyone please help?

How to Install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits

I am with problems to have acess to the link: http://www.microsoft.com/en-us/download/details.aspx?id=12187
Why?
I want do install Visual Studio 2010 on a PC with Microsoft Office 2013 with 64 bits. How can I do it?
Thanks.

Hello Carla Sofia,
Visual Studio installation do not depends on Microsoft Office 2013. They do not have relationship here. I think your problem is that you cannot find the link to install Visual Studio 2010.
In order to know why, please see here:
https://support.microsoft.com/en-us/lifecycle/search/default.aspx?sort=PN&alpha=Visual%20Studio%202010&Filter=FilterNO
The mainstream support for Visual Studio 2010 is already expired and that is why you cannot open any link about Visual Studio 2010 Setup.(I cannot verify whether that link is about VS2010 Setup.)
I think you need to think about the following:
1. If you need Visual Studio 2010, you may have to consider some other channels. For example, official site you can try use MSDN Subscription. For non-official site. Sorry I cannot provide any place for you
2. You can use other latest version of Visual Studio, for example, we have Visual Studio 2012, 2013, 2015 for you to use. You can also use Visual Studio Express 2010 version. It is still available for download.
Best regards,
Barry
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Office 2013 - RemoteApp & Remote Desktop Client

When launching Office products from the Remote Desktop Client with Remote Resources / RemoteApp in OSX Mavericks. e.g. Office Word 2013 it is extremely slow and unresponsive. It opens to fill the screen but not full screen, cropping above the dock and below
the MAC toolbar. This is not apparent in Windows Surface Pro / RT / 7 / 8, Android, iPad / iPhone iOS
If I restore down the Window it seems to remove a white outer bar and then works as intended, even if I manually click and drag more or less to the same size of the maximised window. I believe this may be due to the Office 2013 shadow. In GPO I have:
- Added a registry to DisableAnimation
-Enabled 'Disable Office Animations' in the Office 2013 ADMX
-Enabled 'Do not use hardware graphics acceleration' in ADMX
Before:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=zfEfs30OKP8jaTL5vAjZBnFqPefGBcD4nNUqZHs3JAs%3d&docid=05b1d2a4c002e4152844656608eef7a9d
After:
https://heathsideschool-my.sharepoint.com/personal/bmoore_heathside_surrey_sch_uk/_layouts/15/guestaccess.aspx?guestaccesstoken=9aUKxic763dU7n2z3vxSDBkbXhyDo%2fo3P0jrEh08gtw%3d&docid=092297a567b51448e98ea674e3fab97f6
I am running:
OSX Mavericks
Mac Retina
Server 2012 R2
Kind regards,
Bobby Moore

Hi Bobby,
Let us start with opening Word in its application safe mode. Follow these steps to do so:
Hit Windows key on the keyboard, and start typing
winword /safe in search bar and hit Enter.
If the application works fine safe mode, try disabling the add-ins for the application and check the result:
Click the File tab.
Go to Options.
click Add-ins.
Select or clear the options that you want.
unchecked the add in like send to Bluetooth and something regarding office one not.
Let us know if you need further assistance .

Deploying MS Office 2013 with GPO

OK i would like to deploy office 2013 via GPO, i finally have been able to get the script to work however there is one more detail i need to get figured out.... How can i incorporate into the script so that it will only run once... my script is below
and does the following, it uninstalls office 2010 whether it be 32bit or 64bit then silently installs office 2013 as a startup GPO... how would the script look if i'd like to add so that it looks for a specific txt file that if its there it does nothing and
if it's not it runs install script and perhaps at end of install script maybe it creates that txt file... I need help on the best way to just "RUNONCE"
here is my script:
"C:\Program Files\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config "\\****\Office13\Uni_Office_10\SilentUninstall.xml"
"C:\Program Files (x86)\Common Files\Microsoft Shared\OFFICE14\Office Setup Controller\setup.exe" /uninstall ProPlus /config "\\****\Office13\Uni_Office_10\SilentUninstall.xml"
setlocal
REM ********************************************************************
REM Environment customization begins here. Modify variables below.
REM ********************************************************************
REM Get ProductName from the Office product's core Setup.xml file, and then add "office15." as a prefix.
set ProductName=Office15.PROPLUS
REM Set DeployServer to a network-accessible location containing the Office source files.
set DeployServer=\\****\Office13
REM Set ConfigFile to the configuration file to be used for deployment (required)
set ConfigFile=\\****\Office13\ProPlus.WW\config.xml
REM Set LogLocation to a central directory to collect log files.
set LogLocation=\\****\Office13\LogFiles
REM ********************************************************************
REM Deployment code begins here. Do not modify anything below this line.
REM ********************************************************************
IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
:ARP64
reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall%ProductName%
if NOT %errorlevel%==1 (goto End)
REM Check for 32 and 64 bit versions of Office 2010 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
:ARP86
reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall%ProductName%
if %errorlevel%==1 (goto DeployOffice) else (goto End)
REM If 1 returned, the product was not found. Run setup here.
:DeployOffice
echo %date% %time% %ComputerName% "Has Run the install Process" >> %LogLocation%\HasRunInstall.txt
start /wait %DeployServer%\setup.exe /config %ConfigFile%
echo %date% %time% %computername% Setup ended with error code %errorlevel%. >> %LogLocation%\FinishedInstall.txt
REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
:End
Endlocal

The problem with Office 2010 and later is that it is not designed to be installed remotely or by a script. You need to create an install spec and set up some prerequisites fist. If you ten follow the instructions for using a GPO to deploy Office
you will not need to use a "RunOnce" key or anything else.
Note that eh RunOnce key take a command or batch and command and is deleted as soon as it is executed. The problem you have to solve is how to set the RunOnce key to begin with.
You really must use the information in the links posted for Office deployment. You cannot do an end run around this with any success. If you search for forum posts on this you will see that many have been exactly where you are. Don't wast
your time. Follow the instructions as posted in the Office forum and on the TechNet link. YOu will find it is actually quite easy and very flexible once you understand the steps.
\_(ツ)_/

Office 2013 with Visio and Project Error - Package manifest is invalid

In July I successfully created an App-V install of Office 2013 VL using the ODT. This week I decided to try just doing Visio as we don't install it or Project on all systems. I used my same customconfig.xml and just changed the ProPlusVolume to VisioProVolume
and changed the source path. Everything downloaded and packaged fine. I was able to import into SCCM just fine and create a deployment to my test collection. However when I run the install out of Software Center I get (as part of a much longer error) the message
in AppEnforce.log that the package manifest is invalid. Thinking that maybe I had to include Office as long with Visio I tried packaing all three items but still get the same error. Has anyone else seen this behavior and/or ideas how to fix it? Can I sequence
just Visio or just Project? I'm including my config.xml just in case I've got something wrong with it that I haven't caught. Thanks
<Configuration>
<Add SourcePath="<networkpath>\Microsoft\AppVOffice2013\Sept\" OfficeClientEdition="32" >
<Product ID="ProPlusVolume">
<Language ID="en-us" />
</Product>
<Product ID="VisioProVolume">
<Language ID="en-us" />
</Product>
<Product ID="ProjectProVolume">
<Language ID="en-us" />
</Product>
</Add>
<Display Level="None" AcceptEULA="TRUE" />
<Logging Name="OfficeSetup.txt" Path="%temp%" />
<Property Name="AUTOACTIVATE" Value="1" />
</Configuration>

Hy. I'm having the same problema.
I'm trying to create na app-v package (v.5 SP2) of Office 2013.
I downloaded the Office Deployment Tool for Click-to-Run from here:
http://www.microsoft.com/en-us/download/details.aspx?id=36778
I installed it into C:\Office2013pck shared that folder as
\\APPVMANAGER\Office2013 and mapped as Z:\.
I changed the configuration.xml file to:
<Configuration>
<Add OfficeClientEdition="32" >
<Product ID="ProPlusVolume">
<Language ID="en-us" />
</Product>
<Product ID="VisioProVolume">
<Language ID="en-us" />
</Product>
</Add>
</Configuration>
Then I ran in na elevated cmd:
>Z:
>\\APPV-CL-WIN7DEF\Office2013\setup.exe /download
\\APPV-CL-WIN7DEF\Office2013\configuration.xml
and
>\\APPV-CL-WIN7DEF\Office2013\setup.exe /packager
\\APPV-CL-WIN7DEF\Office2013\configuration.xml
\\APPV-CL-WIN7DEF\Office2013\Appv
Everything seemed to work fine.
The creted folder had Office\Data\15.0.4649.1001 folder (I guessed this is a version number)
When I tried to add the package to App-V Server (in the Console) I get the following error:
An unexpected error occurred while retrieving AppV package manifest. Windows error code: 1465 - Windows was unable to parse the requested XML data.
I tryied to publish it from powershell, getting the same error message agalluci image post shows.
From the Event Log I got this additional information:
There was a problem retrieving the requested package \\APPVMANAGER\AppVpck\Office\VisioProVolume_ProPlusVolume_en-us_x86.appv for import. Error message: Unspecified error
Element '{http://schemas.microsoft.com/appv/2010/manifest}UsedKnownFolders' is unexpected according to content model of parent element '{http://schemas.microsoft.com/appx/2010/manifest}Package'.
I haven't found any indication of which file is the manifest app-v file.
I also haven't found any .xml with the "UsedKnownFolders" tag (I changed the .appv package extension to .zip and explored some of the files).
I tryied creating a package for 32 and 64 bits, only office, office and visio, and office visio and project running Windos 7 and Windows 2012.
Thanks in advance for any help.

Office 2013 with Service Pack 1 installation error about "search path"

I have an automated installation technique that has worked fine with Office 2010 Pro Plus (32-bit), incorporating the latest Service Pack into the network administrative installation point (under \updates), adding 10 foreign languages to the network administrative
installation point, creating a custom .msp with the OCT (that goes into \updates too), editing the config.xml files, and then running setup.exe from that network administrative installation point. This works on 32-bit Windows XP clients and on 32- and 64-bit
Windows 7 clients.
For Office 2013 Pro Plus, I have built the network administrative installation point exactly the same way (original DVD files + languages + SP1 updates + config.xml updates), but the installation is failing with every type of client, all with
the same error message. The network administrative installation point is readable by the normal installing account, but I even get the same error when I login as me and initiate setup.exe manually, and I have all rights to this point.
Here's the critical point from a log file:
2014/03/11 11:53:49:691::[2372] DistributionPoint parsed. The distribution point is now set to: \\archive.ads.college.edu\archive\KBOXalt\Office2013
2014/03/11 11:53:49:691::[2372] COMPANYNAME specified in config.xml.
2014/03/11 11:53:49:691::[2372] USERNAME specified in config.xml.
2014/03/11 11:53:49:800::[2372] Setupexe Resiliency Mode is set to [PerformIfApplicable]; thus Resiliency is [disabled] for the [InstallExecutionMode]
2014/03/11 11:53:49:910::[2372] Searching for default versions of resource files under the folder [\\archive.ads.college.edu\archive\KBOXalt\Office2013].
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
ErrorCode: 0(0x0). Failed final attempt to load a setupexe resource file.
2014/03/11 11:53:50:019::[2372] Error: GetDirectories: search path \\archive.ads.college.edu\archive\KBOXalt\Office2013 does not exist
Type: 34::InvalidDirectory.
2014/03/11 11:53:50:019::[2372] WER element [SuppressModal] is set to value [true]
2014/03/11 11:53:50:019::[2372] WER element [P4] is set to value [InvalidDirectory]
2014/03/11 11:53:50:019::[2372] Catalyst execution finished: 03/11/2014 11:53:50. Return code: 30034. Exception caught: InvalidDirectory.
2014/03/11 11:53:50:019::[2372] PERF: TickCount=894821 Name=RunSetup Description=End function
I cannot find any references to this exact error anywhere on the Internet. Can anyone tell me what this means, and how I fix it?

As automated, the utility that runs setup.exe maps a drive letter to
\\archive.ads.college.edu\archive\KBOXalt using a kboxmap AD account, which has read access to the whole \KBOXalt tree. I used that same kboxmap AD account manually to simulate what the utility does, and hit the same problem. But here's what's
odd: right next to that
\\archive.ads.college.edu\archive\KBOXalt\Office2013 directory is an
\\archive.ads.college.edu\archive\KBOXalt\Office2010 directory, both created the same way, and the Office 2010 installation has always worked perfectly using the kboxmap AD account. I don't understand why Office 2013 is only working for an account with
read/write access, where Office 2010 worked fine for an account with only read access. Especially when the Office 2013 resource kit documentation clearly states that the account running the installation should only have read access, nothing more. (All this
KBOX stuff comes from the fact that our deployment environment is a Dell KACE KBOX 1000. However, that plays no part in the problem: ignoring the KBOX 1000, I can manually recreate the problem every time.)

Deploying Office 2013 with Group Policy

I would like to deploy Office 2013 using group policy. I am new to group policy so am looking for some advice and guidance on the best way to deploy. I would like to deploy with no interaction with the user but yet display a message so that they
know not to open Office. I would also like to create a custom registry setting so that if I need to re-install, all I have to do is delete the registry setting. I have tried a group policy for installing with OCT settings (Basic, Suppress
Model checked, No Cancel checked, Completion Notice checked) and modifying the Config.xml (<Display Level="Basic" CompletionNotice="yes" SuppressModal="yes" AcceptEula="yes" />) but I can not get it to display
the installer screen so that users know it is installing. It does display the screen when running the setup.exe manually. I have a setting in the OCT that creates the registry setting and that is working correctly. My group policy is set to run the
below bat file at startup in the Computer Configuration.
setlocal
REM *********************************************************************
REM Environment customization begins here. Modify variables below.
REM *********************************************************************
REM Get ProductName from the Office product's core Setup.xml file, and then add "office15." as a prefix.
set ProductName=Office15.Standard
REM Set DeployServer to a network-accessible location containing the Office source files.
set DeployServer="\\xxxxxx\setup.exe"
REM Set LogLocation to a central directory to collect log files.
set LogLocation=\\xxxxx\Logfiles
REM *********************************************************************
REM Deployment code begins here. Do not modify anything below this line.
REM *********************************************************************
IF NOT "%ProgramFiles(x86)%"=="" (goto ARP64) else (goto ARP86)
REM Operating system is X64. Check for 32 bit Office in emulated Wow6432 uninstall key
:ARP64
reg query HKEY_LOCAL_MACHINE\SOFTWARE\WOW6432NODE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if NOT %errorlevel%==1 (goto End)
REM Check for 32 and 64 bit versions of Office 2013 in regular uninstall key.(Office 64bit would also appear here on a 64bit OS)
:ARP86
reg query HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\%ProductName%
if %errorlevel%==1 (goto Office) else (goto End)
REM If 1 returned, the product was not found. Run setup here.
:Office
%DeployServer%
echo %date% %time% Setup ended with error code %errorlevel%. >> %LogLocation%\%computername%.txt
REM If 0 or other was returned, the product was found or another error occurred. Do nothing.
:End
Endlocal
Any advice or guidance would be greatly appreciate on how to get a pop up message while software is installing or if there is a better way to deploy.

> but I can not get it to display the installer screen so that users know
> it is installing. It does display the screen when running the setup.exe
> manually. I have a setting in the OCT that creates the registry setting
> and that is working correctly. My group policy is set to run the
> below bat file at startup in the Computer Configuration.
Check http://gpsearch.azurewebsites.net/#2308 - if this is enabled, you
will not be able to show "anything" in startup scripts...
Martin
Mal ein
GUTES Buch über GPOs lesen?
NO THEY ARE NOT EVIL, if you know what you are doing:
Good or bad GPOs?
And if IT bothers me - coke bottle design refreshment :))

Cannot Save Word files as a PDF in Office 2013 with Office customization tool

Hello
I'm deploying office 2013 as a part of a post clone task. Using the customization tool I created an msp with the full installation (without outlook,Link, or skydrive) I noticed that I cannot save or export files as PDF files. If I do a manual
install (without MSP) I can save files as pdf. I can't find anywhere in the customization tool that allows me to choose different "save as" file types. In office 2010 I used to be able to save word files as PDF files. Any ideas would
be greatly appreciated.
Charles

Hi,
In regarding the issue, could you give me more information? Did you test to install the Office 2013 by using MSP and manual installation in the same computer? Did the other Office suits can not save files as pdf?
Let's do some test to narrow down the issue:
If you use the only one computer to test, please export a new MSP file include all the suits and use the all the default setting. Then we follow the
link to deploy again.
If the issue still exists, please try to change a computer, and update Adobe programs to install the new MSP file to test.
If you get some error message when you save as pdf through Word, please upload, I'll do more deeply research.
Regards,
George Zhao
TechNet Community Support

Office 2013 with Lexmark printer - Cannot change printer settings

I have a Lexmark x4650 and I can open the printer settings within all of the Office 2013 applications (Windows 7 64-bit). But after I change the settings to what I want, I cannot exit the printer settings dialog. If I click OK, nothing happens. If I click
Cancel, nothing happens. If I click the X in the upper right of the window, nothing happens. The only way to close the printer settings dialog is to force the Office application to close through the Windows task manager. I've tried re-installing both Office
and the Lexmark print driver/applications with no success. Has anyone else experienced this problem? Does anyone have a solution?
Thanks,
John

We need to narrow down the issue, to see if the root cause is on Office side or Printer side. Please try below steps for troubleshooting:
1. Try obtaining an updated printer driver from the printer's manufacturer. And update your PC, restart and try again.
2. Try to select another printer in Printer
drop-down list in any Office application, and try again to see if we have the same issue.
Printing is primarily controlled by settings in Microsoft Windows:
3. Please try to print a file outside the Office application, say a .pdf file to determine whether your printer setup in Windows is correct or using the Windows Printing
Troubleshooter.
Hope this can help you. Thanks.

Deploy Office 2013 with language pack

Hi,
We want to deploy Office 2013, for this I followed the tutorial:
http://gallery.technet.microsoft.com/office/How-to-Deploying-Office-0f954e7f
In the first step I need to make an MSP file, but this file doesn't get used in the deployment? I think this is a fault in the tutorial.
Also the uninstall string is setuP.exe /uninstall. Is this correct?
Second we want to deploy the dutch language pack with SCCM 2012, but I can't find out how. The package need to be installed but Office 2013 still need to be default language English.
Can someone help me out with this?
Thanks in advance.

Some troubleshooting tips:
Run the installation command locally using SYSTEM account (Get psexec.exe, open cmd, run "psexec.exe -s cmd", this will open a new command line window with SYSTEM privilege, try running your installation command there)
Check the Office 2013 installation logfiles to see if your configurations are correct, more info on that here:
http://blogs.technet.com/b/odsupport/archive/2010/12/30/troubleshooting-office-installation-failures.aspx
After those two steps are ready and you're sure your installation command works, you try it with ConfigMgr
With ConfigMgr, check %windir%\ccm\logs\ -folder for AppEval.log, AppEnforce.log and AppDiscovery.log, more info on these logfiles you can find here:
http://blogs.technet.com/b/configmgrdogs/archive/2012/05/26/new-logs-in-configmgr-2012-client-logs.aspx

Office 2013 with Acrobat XI Patch 11.0.05

After installing Office 2013 on computer with Adobe Acrobat XI with Patch 11.0.05 already installed, the acrobat tab is gone. Everything I have read says to install the latest patches. Do the patches need to be reinstalled since Acrobat was updated prior to the install of 2013? If som which patch specifically?

You shouldn't need to reinstall but try doing a repair of the Acrobat install from under the Help menu. Also, check to make sure the PDFMaker Add-on is enabled in Office 2013.

Sharing 5-license Office 2013 with another PC

I bought 5-license Office 2013 in December, and even shared with with my secondary PC, but my memory of how to do it has disappeared. Can you give me instructions or a pointer?
Pete Jacobsen

Wrong forum - this is for Windows Home Server. Try at answers.microsoft.com
Phil P.S. If you find my comment helpful or if it answers your question, please mark it as such.

PDF created from Office 2013 with Acrobat X doesn't have correct page size

We have a process of quickly creating PDFs along with combining several Word files to PDF by utilizing the "right click" on a Word file(s) to save as a PDF within Windows. Many times, our page size in Word is 5.5 X 8.5 and it does not save actual page size once PDF is created by using the "right click" and defaults to 8 1/2 X 11. Is there a way to fix this or edit a setting? It works fine from within Word if you "Save as" or "Export" but we need the right click to save as actual page size. Please help. It worked fine in all previous versions of Word/Office. Thanks!

Hi pwhite2315,
Could you please let me know what version of Acrobat are you using.
Try using 'Create PDF' option under Acrobat ribbon in your word file and check for the same.
Also, please open 'Preferences' for Acrobat PDFMaker and check what 'Conversion Settings' have you selected.
Let me know.
Regards,
Anubha

HT4759 Can the ICloud sync with Windows 8 and Office 2013?

I need to sync my new windows 8/office 2013 with the ICloud. Please tell me know how to do this.

Download and install iCloud control panel for Windows: http://support.apple.com/kb/dl1455

Office 2013 with OneDrive Desktop sync conflicts

Similar Messages

Maybe you are looking for