Office 365 monitoring using SCOM

Looks MS has released MP for office 365 , Did any one imported and configured alert ?
What are the pre-request to configure alert ?
http://www.microsoft.com/en-us/download/details.aspx?id=43708

This MP is a little annoying as you'll get a critical alert for any Resolved Incident entries still showing on the Microsoft O365 status pages. Until Microsoft expire these entries off from their side, you're stuck with the alert. If you manually close
the alert, it gets recreated as it's still present on the O365 side.
This means you're left with a bunch of unnecessary critical alerts clogging up your Active Alerts, such as:
Resolved Incident EX8319: False positive for Exchange Online (ServiceRestored)
Resolved Incident EX8318: False positive for Exchange Online (ServiceRestored)
Resolved Incident EX8312: Post-incident report published for Exchange Online (ServiceRestored)
Resolved Incident EX8267: Post-incident report published for Exchange Online (ServiceRestored)
Resolved Incident LY7139: False positive for Lync Online (FalsePositive)
Active Incident SP9188: False positive for SharePoint Online (ExtendedRecovery)
Active Incident SP9208: Extended recovery for SharePoint Online (ExtendedRecovery)
Active Incident SP9187: Service restored for SharePoint Online (ExtendedRecovery)
Active Incident SP8367: Service restored for SharePoint Online (ExtendedRecovery)
Resolved Incident IS9202: Service restored for Identity Service (ServiceRestored)
Resolved Incident MO9196: Service restored for Office 365 Portal (ServiceRestored)
Resolved Incident FO8317: Post-incident report published for Exchange Online Protection (PIRPublished)
Resolved Incident MO8285: Service restored for Office 365 Portal (ServiceRestored)
Resolved Incident MO8287: Post-incident report published for Office 365 Portal (ServiceRestored)
Resolved Incident EX8268: False positive for Exchange Online (ServiceRestored)
Resolved Incident MO8253: Service restored for Office 365 Portal (ServiceRestored)
Resolved Incident MO8370: Post-incident report published for Office 365 Portal (ServiceRestored)
Resolved Incident EX9215: Service restored for Exchange Online (ServiceRestored)
Resolved Incident EX8343: Post-incident report published for Exchange Online (ServiceRestored)
Of that lot, I regard only four of those to be Critical, the rest should be in the Informational section.
Bear in mind too that this is per O365 subscription, so if you happen to look after a number of clients with O365 subscriptions, you're going to get multiples of those. Flood city.
They need to further enhance the Office 365 Monitoring API to make it more granular so that things can be properly categorised.
Oh, and the folder should be called Microsoft Office 365, not just Office 365. :-/

Similar Messages

Office 365 Monitoring using SCOM 2012 R2

http://www.microsoft.com/en-us/download/details.aspx?id=43708
We have imported MP for O365 and added the new subscription (with Global Administrator permissions using Office 365 admin )after that we got an alert like below:
Connection to EndPoint Service failed
Any idea what would be the issue here?
Sengo

Hi,
It's the correct page response "EndPoint not found", if you try to access the https://office365servicehealthcommunications.cloudapp.net/shdtenantcommunications.svc
page.
The blank username and passwords are Ok as well, but be careful to edit your credentials from the subscription page, as they are not changed in this case in the Office365 Run As Account, looks like a bug. Therefore, edit them only through
the Accounts menu, or create a new subscription.
The management pack communicates exactly to the mentioned above page only, it's not possible to use IPs, as they could be changed at MS servers side. The host should be whitelisted in case if you have firewalls\proxy. At the same time, depending
on your network\proxy\subscription configurations, possible issues could exist because of certificates and authorization at different levels.
In case of proxy - the Office 365 Proxy Run As Account should be configured. It's automatically created during installation of MP, but the account with Internet access should be added there. Take in attention that using the Office365 Run As
Account does not work out. Therefore the separate Windows account should be created and used as the Office 365 Proxy Run As Account, even if it's the same as the Office365 Run As Account. When using the proxy account, one of the Monitoringhost.exe
processes works under this account. If the proxy account is not configured, this process works under the system account. The proxy account was not documented in Office365 MP manual.
Don't change the default name of created Office 365 Run As accounts, somehow it affects the connection monitor.
Hope it helps :)
Natalya
Hi Natalya,
Thanks for this post. Indeed my SCOM server is behind a proxy. Let's say my Office 365 account is called "SCOM.O365" - it appears under Administration - Accounts under Basic Authentication, with the "friendly" name of "Office 365
Run As Account_xxxxx". Do you mean I create a second account under "Windows" (it would be Active Directory based) also called "SCOM.O365" that the MP will use for proxy, and the MP will automatically run MonitoringHost.exe with this
AD account?
thanks!

Steps to deploy Lync for users who own Office 365 E1/E2 licenses, but don't have Office 365 E3, using Office Deployment tool.

After many hours of debugging with Microsoft support the system to install the Lync Client silently can be done with a SINGLE LINE command. The steps to take are below. It should be an easy next step to put this as GPO installation since
it is a simple command.
Comments appreciated.
side question: Why is there no Lync 2013 or Lync Office 365 forum?
Basic steps to deploy Lync for users who own Office 365 E2 licenses, but don’t have Office 365 E3, using Office Deployment tool.
This also applies for other Office 365 service types where the full office suite download is not included. In April 2015 This was impossible to find online and not know by the Lync support team.
Steps are:
Download the Office deployment tool from
http://www.microsoft.com/en-in/download/details.aspx?id=36778 and extract it to a folder. For this
example we will use the \\server\sharename
location.
Extracting it creates a setup.exe file and it show a sample XML file.
2. Create XML file and give it a name such as LyncEntryRetail.xml
Note: The key is the productID that has to be the “LyncEntryRetail”. Other product IDs will download a version that needs another office 365 license. The productID “LyncRetail” needs an E3 license of Office 365.
<Configuration>
<Add SourcePath="\\server\sharename" OfficeClientEdition="32" >
    <Product ID="LyncEntryRetail">
      <Language ID="en-us" />
    </Product>
</Add>
</Configuration>
3. From the folder where you extracted the Office deployment tool, run the following command on the command prompt to download the source files and store them on the shared drive:
(on single line)
Setup.exe /download LyncEntryRetail.xml
(This is the name of the XML file created above)
One can also run the same on a server share by using UNC path names such as (on single line)
\\servername\sharename\Setup.exe /download
\\servername\sharename\LyncEntryRetail.xml
(This is the name of the XML file created above)
4. Run the following command on the command prompt on a machine where you want to install the software: (on single line)
\\servername\sharename\Setup.exe /configure
\\servername\sharename\LyncEntryRetail.xml
(This is the name of the XML file created above)
Once you are comfortable that it all works, you may want to edit the XML file if you want to have silent installation and add the following lines.
<Display Level="None" AcceptEULA="TRUE" />
<Property Name="AUTOACTIVATE" Value="1" />
Regards
Bart
Bart Louwagie

Hi Chudly，
For the office365 issue, I also recommend you can post in dedicated forum for more efficient support:
http://community.office365.com/en-us/f/166.aspx
If you want to modify the powershell script, please post the current script and the issue, we will notice and continue to follow up.
If there is anything else regarding this issue, please feel free to post back.
If you have any feedback on our support, please click here.
Best Regards,
Anna Wang
TechNet Community Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

Office 365 cmdlets using Powershell 4.0

Hi
Where is the forum for:
1. Office 365 cmdlets using Powershell 4.0
2.Exchange Online using Powershell 4.0
Thanks!
- Andre
Regards Andre Thompson

PowerShell forum is here.
Windows PowerShell on TechNet
Regards, Dave Patrick ....
Microsoft Certified Professional
Microsoft MVP [Windows]
Disclaimer: This posting is provided "AS IS" with no warranties or guarantees , and confers no rights.

Office 365 Management Pack - SCOM 2007

Hi All,
Can anyone please point me to an official link on SCOM 2007 R2 Management Pack for
Office 365. Just wondering if the below link is the right one which I am reffering to
http://www.systemcentercentral.com/scom-monitoring-office-365/
Also, the one which is available for download in "Microsoft Download center" (http://www.microsoft.com/en-ca/download/details.aspx?id=43708)
is designed for SCOM 2012 family, not for SCOM 2007 R2
Appreciate your help...
Faizan

Although this MP is not the official document on monitoring Office 365 using SCOM 2007 R2, it original came from
http://blogs.technet.com/b/momteam/archive/2011/07/29/monitoring-office-365-using-operations-manager.aspx which has a higher reputation and reliable source for Microsoft solution. At last, it is high recommend that you should test it on your testing
environment before roll out to production environment.
Roger

Office 365 Monitoring

Hi All,
MS released MP for Monitoring Office 365, In my environment office 365 is in Cloud , Can you please guide me how can i monitor office 365 with the help of MP

Hi,
As far as I know, SCOM 2012 can be used to monitor Azure, so I think with the Office 365 management pack we should be able to monitor Office 365 in cloud.
The management pack can be download here:
http://www.microsoft.com/en-ca/download/details.aspx?id=43708
Please go through the management pack guide before using it.
Regards,
Yan Li
Regards, Yan Li

Office 365 App using NAPA - "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)"

Hello,
I am creating an app using NAPA tool in Office 365. I am trying to "Add an attachment" to a custom list item using SPServices. When I am using my code (jquery code) in content editor web part on a page, its working fine, but when I am adding
the same code in an app, its giving me error : "The system cannot find the file specified. (Exception from HRESULT:
0x80070002)" - 500 Internal Server error.
(function () {
// This code runs when the DOM is ready and creates a context object which is
// needed to use the SharePoint object model
$(document).ready(function () {
//alert('In doc ready');
$('.attachmentButton').change(function(event){
var listName = 'UploadTest',
itemId = 2;
handleFileChange(listName,itemId,event.target.files);
function handleFileChange(listName,itemId,files){
alert('In handleFileChange :=' + listName + "" + itemId + "" + files[0]);
alert('files.length :=' + files.length);
var filereader = {},
file = {},
i=0;
//loop over each file selected
for(i = 0; i < files.length; i++) {
alert('In for loop');
file = files[i];
filereader = new FileReader();
filereader.filename = file.name;
alert('filereader.filename :=' + filereader.filename);
filereader.onload = function() {
var data = this.result;
var n=data.indexOf(";base64,") + 8;
//alert('n :=' + n);
//removing the first part of the dataurl give us the base64 bytes we need to feed to sharepoint
data= data.substring(n);
//alert('data :=' + data);
alert('Above SPServices this.filename :=' + this.filename);
$().SPServices({
operation: "AddAttachment",
listName: listName,
asynch: false,
listItemID:itemId,
fileName: this.filename,
attachment: data,
completefunc: function (xData, Status) {
console.log('attachment upload complete',xData,status);
alert('Status :=' + Status);
if (Status.toLowerCase() == "error"){
alert(xData.responseText);
alert(xData.status);
alert(xData.statusText);
filereader.onabort = function() {
alert("The upload was aborted.");
filereader.onerror = function() {
alert("An error occured while reading the file.");
//fire the onload function giving it the dataurl
filereader.readAsDataURL(file);
alert(xData.responseText); - gives error - " "The system cannot find the file specified. (Exception from HRESULT: 0x80070002)""
alert(xData.status); - gives error - "500"
alert(xData.statusText); - gives error - "Internal server error"
Server Publishing infrastructure and Server publishing features are activated on site collection and site respectively.
Any suggestions, why I am getting this error in NAPA ?

Hi,
According to your post, my understanding is that you have an issue about adding attachments to list items in app.
To add attachment to list item in the host web, we should first get the list and the list items from the host web, then add the attachments to the list items.
There are two articles about retrieve the list and list items in the host web, you can refer to them.
http://www.dotnetcurry.com/showarticle.aspx?ID=1028
http://www.c-sharpcorner.com/UploadFile/93cb27/retrieve-sharepoint-app-host-web-list-items-in-sharepoint-ho/
What’s more, we can also use the REST API to achieve the same scenario.
http://www.c-sharpcorner.com/UploadFile/472cc1/add-attachments-to-list-items-in-sharepoint-2013-using-rest/
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support

SQL Server 2012 AlwaysON Monitoring using SCOM

Team,
We have SCOM deployed and is serving as a monitoring solution for our SQL Estate. However I want some pointers to monitor the health of DBs within Avaialibility Group like DB Sync, log queue etc. Please direct me with the AlwaysOn health parameters that
can be monitored by SCOM.
I have confirmed with SCOM admin that we have the latest management pack installed for SQL 2012 and currently its getting monitored. However we are not seeing any alerts though.
Your inputs are highly appreciated.
Regards,
Sharath

The below link might be useful
http://blog.islamgomaa.com/?p=273
http://thoughtsonopsmgr.blogspot.com/2012/04/updated-mp-sql-server-monitoring-mp.html
--Prashanth

Office 365 Reseller - Provision of new Office 365 business using API's?

Hi,
I couldn't work out which category to put this into. We have built our own provisioning and billing portal which is currently used to provision phone services. We currently resell hosted exchange and are looking to resell Office 365. Are there any API's
available for Office 365 for the creation, management, deletion of businesses and users within that business. We want all of the functionality of the office 365 partner and admin portal but we want all tasks to be completed within our own provisioning portal
using API calls to the office 365 admin tools?
For example, you can purchase office 365 from the godaddy website, we want to be able to do that.
Thanks.

Hi,
Could anyone advise on this matter ?
Thanks,
Kind regards.

Office 365 configuration using in SMTP

Hello Friends,
we have developed one service to send mail through SMTP settings. My client is using Office 365 email Id.
For Example:
username: [email protected] , password: XXXXXX
From email: [email protected]
ssl=true
hostname: smtp.office365.com
In above case,Mail successfully sent.
But as per below settings, we are getting failure in mail sending:
username: [email protected] , password: XXXXXX
From email: [email protected]
ssl=true
hostname: smtp.office365.com
Error: "Mailbox unavailable. The server response was: 5.7.1 Client does not have permissions to send as this sender"
In above case,we have used different from Name and account email id.
Please give me some solution to solve above issue.
Thanks,
Sonal Patel

Have you solved this issue?
Have a look at posts related to the same message:
exchange
"550 5.7.1 Client does not have permissions to send as this sender"
SMTP error 550 5.7.1 Client does not have permissions to send as this sender
SMTP server error: 5.7.1 Client does not have permissions to send as this sender

Hardware Monitoring using SCOM 2007R2

Hi All,
We have a requirement to monitor hardware (Dell,HP) in our SCOM 2007 R2 environment. Also we have to make sure that the hardware monitoring group should only view the hardware related alerts and no alerts related to OS.
I believe that Hardware monitoring is based on the operating system and those OS alerts may be related to the Hardware related alerts.
I want to clarify myself is my point of stand that can I restrict users from viewing OS related alerts when I provide access to the hardware monitoring group.
Thanks
raj

You can download and install Hardware Management pack for Dell and HP to monitor Hardware servers using below link
http://opsmgr.wordpress.com/2007/06/30/hardware-monitoring-with-scom-07/
And for operating system you can import management pack related to your o.s using below link
http://blogs.technet.com/b/mazenahmed/archive/2011/11/30/download-windows-server-operating-system-management-pack-for-operations-manager-2007.aspx
So that you can separate between users who viewing alerts of Hardware and users who viewing alerts of OS
Please remember, if you see a post that helped you please click (Vote As Helpful) and if it answered your question, please click (Mark As Answer).

Every time I restart my computer, I have to log in to Microsoft Office 365 to use applications

After starting my computer, I have to sign into Microsoft 365 or enter a product key to open up Word documents, Excel sheets or Powerpoint. This is problematic because I don't always have internet wherever I go and thus, don't have access to Office. Help!

Hi
According to your description, you want to work offline with Office 365.
Internet access is required to install and activate all Office 365 plans and to manage your subscription account. Internet connectivity is also required to access Office 365 cloud productivity services, including email, conferencing, IT management, and other
services.
Many Office 365 plans also include the desktop version of Office, for example, Office 365 Small Business Premium and Office 365 Enterprise E3. One of the benefits of having the desktop version of Office applications is that you can work offline and have
the confidence that the next time you connect to the Internet all your work will automatically sync, so you never have to worry about your documents being up to date. Your desktop version of Office is also automatically kept up to date and upgraded when you
connect to the Internet, so you always have the latest tools to help you work.
Compare Office 365 plans.
Office365 supports offline working in a number of ways.
SharePoint Online – Use SharePoint Workspace to synchronise Documents between your local PC and your SharePoint Online Site allowing offline working.
Use Microsoft Office Professional Plus – Subscribe and receive you can install the full install of the Microsoft Office Suite to use on your computer (and up to 4 others which you use) – this includes Word, Excel, PowerPoint, Outlook, Onenote, Access, Lync,
SharePoint Workspace & Infopath.
Tylor Wang
TechNet Community Support

Office 365 and using Word on my iPad question?

I was thinking of purchasing Office 365 in order to unlock the editing functions of the new Office for iPad App. Perhaps I am a little dense, but I'm having difficulty understanding why Office 365 offers to Home Edition price points ($69 or $99 per year). I understand that the major difference between the two fees, is with regard to how many PC's or Mac's that I can assoicate with my account, however, I don't understand why I have to associate my Macs with an Office 365 acccount if: (a) Office 365 is a "cloud based" apppliction, and (b) I already have the most recent version of Office for Mac on all of my computers.
My understanding of the need to purchase Office 365, would be so that I can edit Office documents on my iPad, as without this subscription based service, I can only view Office documents. However, if the service is cloud based, why wouldn't I be able to access any documents stored in a 365 account, sync those documents between the cloud and my iPad, and as needed, download the documents to one of my Macs? Again, my confusion is with the information from Microsoft telling me that the $69 version only allows me to connect 1 PC or Mac and one tablet or ipad (I was considering the $69 version for my home needs).
Any help or clarificaion would be greatly appreciated.
Thanks in advance,
iDan

The apple version is called keynote, its in the apple App Store.

Certificates monitoring using scom 2007 r2

B John

Hi,
PKI Certificate Verification is a custom MP.
http://www.systemcentercentral.com/PackCatalog/PackCatalogDetails/tabid/145/IndexID/24860/Default.aspx
OpsMgr 2007 (SCOM): Coretech Certificates Expire checker Management Pack – 0.0.0.1
http://blog.coretech.dk/jgs/opsmgr-2007-scom-coretech-certificates-checker-management-pack-0001/
Monitoring Certificates In SCOM
http://blogs.technet.com/b/omx/archive/2013/01/30/monitoring-certificates-in-scom.aspx
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

802.1x wireless authentication using NPS - SSO sign on to Office 365 using ADFS

Hi Spiceys,I'm researching for a potential client and would like to know if the following is possible:They have an existing wireless network with a working 802.1x implementation using NPS as RADIUS. They are very keen to move to Office 365 and use SSO and my understanding is that they'll need to spin up a working ADFS implementation to arrange this. We want to use Microsoft tech to tie it all in, so 3rd party SSO apps I don't want to investigate.If a wireless client is authenticated with NPS, and we have a working ADFS implementation are they able to access Office 365 resources without signing in twice? I'd imagine that the NPS auth would give them the necessary DC token, but if they access O365 resources and get redirected to the ADFS website and use Windows integrated login, will it 'just work' ? They are looking at using the full...
This topic first appeared in the Spiceworks Community

did you find any resolution to this? our mba- mid 2013 deployment is having a very similar problem. We've gone through loads of troubleshooting and have yet to come to a resolution. all our mid 2012 mba's are working fine they're 10.7.5/10.8.4 mixed. console logs don't show much, i'll try the wireless diags tomorrow. our other 10.8.4 build appears fine on other models of machines. i've read posts about deleteing the adapters, deleting the system config plists and changing the mtu size, these steps do not work for us.
we don't have as high a failure rate with our deployment, but 25%-30% of our clients randomly drop connectivity and are unable to reconnect (fluttering wi-fi wave). when you slect the wifi symbol in the menu bar other wireless networks do not show, the 'looking for networks' fly wheel continues to spin. ocasionaly on login the yellow jelly bean will appear then disappear before finally timeing out without logging the user in (depsite having mobile accounts enabled). mostly the problem manifests itself when waking from sleep - the wifi symbol flutters endlessly without connecting. deleting the 8021x profile and readding it will reenable connectivity. we've tried new profiels, but to the same end. i know our certs and systems are fine because previous mac os x builds work fine as do our windows clients.
any input would be much appreciated.

Office 365 monitoring using SCOM

Similar Messages

Maybe you are looking for