Office Add-in Request Definition has been changed error

Hi,
When refreshing a request in Excel sometimes I get the error "Request Definition has been changed on server since last download. Please use Edit Prompts and Levels to select new filters.". However, I haven't changed the request.
The idea is to have some Excel files ready to be refreshed according to some period. To prevent the changing of the request definition, the request is filtered with dates returned by another request. With this approach I have managed to alter the dates and have a normal refresh without any problems. However sometimes (even when not changing the interval dates) I get this very same error.
Can anyone explain this or know any workaround to prevent this?
Thanks!

Hi
Did anyone came back to you with help on this issue?
If yes , can you please share that with me as i am also facing the same issue here.
Please mail me to [email protected] when you have sometime for this.
Thanks a lot.
Regards
Mano

Similar Messages

How to find out if a transportation/accomodation request has been changed?

Hello all,
I need to know if one transportation/accomodation request has been changed after being created. I am using the TRIP standard transaction to plan the travel request without any external agency integration.
My problem is that if I change any field of one travel request such as: begin time, city from, destination or whatever, I cannot
find any field or table that lets me know there has been a change.
I am using an user exit that triggers once you have pressed the "Save" button, but there is no info about the travel requests. There is info about the cluster of the trip, but not about the travel requests. Only the FTPT_REQUEST database gives me this information, but only the final one, so I cannot compare the previous values with the last ones.
Can you please help me with this topic? I don't know how to solve it.
Thank you very much in advance.
Best regards.

Hi,
you can use trace event ST01 or using SAP standard workflow.
as per standard workflow WS20000050 for travel request, while in travel request workflow for approval there is task of "wait for event" that could know if you are changing your travel request it will flow to stop workflow and start it again.
for details, maybe you could see sap workflow SWDD and open workflow of WS20000050.
hope it helps.
thanks.

Here's a fix for "This item cannot be updated because it has been changed by another user or process"

https://gallery.technet.microsoft.com/System-Center-Service-fca7af29
A few months ago on the Technet Gallery, I submitted this custom control to be used on SCSM console forms. The purpose of the control is to eliminate the "This item cannot be updated because it has been changed by another user or process" error
message that we all have seen at least once (a day :) ).
The details are in the gallery description (along with installation instructions for existing forms and your own custom forms).
Here's a "short" description (nothing I ever post here is short :) ): This is a custom control that can be applied to an SCSM form like the Service Request form or Windows Computer form or your own custom form built with the authoring tool or Visual
Studio. When you click "OK" or "Apply" on the form, this control scans the form and Service Manager's database for any changes to the object you have open. If a property that _you_ have changed on the form was _also_ changed in the CMDB
(by a workflow or another user), this control will present a dialog box letting you know what happened. It will also let you choose which value to keep (yours, theirs, or the original value).
Just as importantly (and important in a greater percentage of cases), if a workflow changes a "background" property (like FirstAssignedDate) while you have the form open and you click OK, the control will detect the change and allow the form submission
to go through while keeping your changes and the FirstAssignedDate change that the workflow made. You won't get an error message or even a warning. And most importantly, you won't lose your changes.
That's where the "optimistic" part of the control's name comes from. It applies optimistic concurrency control to SCSM forms, while also providing an anti-collision interface for you to use so you no longer lose any of your changes.
Furthermore, this control will work on related items that are opened in memory; for example, the activities on a Service Request. So if you change an activity's title while the workflow engine sets it in progress, you won't get an error. The activity will
be in progress and will get your new title when you click OK or Apply.
Lastly, (and I admit this part is getting into the deep inner workings of console forms) if your form loads a sub projection at run time (to the root object) this control will detect the load and treat that sub projection as if it were apart of the original
form all along.
I've gotten a little feedback about this control, but I'd like to get more since it's a work in progress. So, I'm announcing it here on the forums. Please give it a try and let me know if you have any questions. I'll be happy to answer them here. Thanks,
folks!
Oh, and to answer the most common question right away: It's free. There is no paid version or anything like that. This is something I built for the SCSM community.

Great job!
Will definitely try it out.
Best regards,
Marcus

I cannot sign into App Store. "unknown error" and then "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"

I cannot sign in to the App Store.
I changed countries a few months ago and updated all my account info and everything was working fine, until recently, while trying to upgrade my softwear to Mavericks, which I cannot do. My apple Username and password work fine on iTunes and on my iPhone. I can also access all my account info when I sign in through the website. It just will not work for the App Store on my Mac Pro.
When I click "Welcome" under Quick Links it asks me to sign in. I sign in with my Apple Username and Password and then it DOES NOTHING
When I click on "Free Upgrade" and then "Install" on the mavericks software, it asks me to sign in again. This time it says "unknown error" and then it says "We cannot complete your request. There has been an error in the App Store. Please try again later. (4)"
I''m completely blocked. I cannot procede without being able to update my software.
Please help me.
Rhea

You could try this.
Back up all data.Triple-click anywhere in the line below on this page to select it:
/Library/Preferences/SystemConfiguration/NetworkInterfaces.plist
Right-click or control-click the line and select
Services ▹ Reveal
from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Reboot and test. If there's no change, restore the item you deleted from a backup, overwriting the one that may have been created in its place. Otherwise, you may need to recreate some of your settings in the Network preference pane.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
Credit for this solution to ASC member luis.pinhor.

I keep getting a warnin that my pages document could not be auto saved. The file has been changed by another application. Click save anyway to keep your changes and save the changes made by the other application as a version, or click revert to keep the c

I keep getting a warning stating that the document could not be auto saved in pages. The file has been changed by another application. Then it says click save any way to keep your changes and save the changes made by the other application as a version, or click revert to keep the changes from the other application and save your changes to a version.
What in the heck does all that mean, and why are they trying to behave like a Windows product or a Microsoft office product. I just don't get it.
Why is another application changing my documents? It's like they've created a virus within their own programs. It's a pain in the neck and makes no sense.

I am also having the issue of a warning saying "could not be auto-saved in Pages. The file has been changed in another application. I then hit "save anyway", the warning will go away for a time, sometimes minutes, sometimes hourr, but then the warming reapprears saying the same thing. This is not the case with all Pages documents but it is the case with many.
Working with a Retina Macbook Pro and current software
These are newly created documents

Changing a number in an excel file that has been changed to a PDF

Changing a number in an excel file that has been changed to a PD ?

Hi llkwx,
I would like to confirm ,do you want to change the page number of the PDF or any other number in the data given in that PDF?
For changing the page number display
You can select Page Thumbnail option from the left hand side .In that panel ,right click and select the option "Number Pages" from the drop down menu.You can further change the page numbers as per your requirement.
Adding page numbers to PDF
Tools>Pages>Edit Page Design>Header and Footer>Add Header and Footer>click Insert Page Number
Do write us back with your response .We will be glad to help you out with your queries.
Regards
Sukrit Dhingra

My phone has been changed under warranty by the apple store in germany. ı need a change document to register the phone in my country again. ımeı numbers of old and new must be in the document.you can send an mail in pdf format as soon as possible please.

my phone has been changed under warranty by the apple store in germany.
ı need a change document to register the phone in my country again.
ımeı numbers of old and new must be in the document.you can send an mail in pdf format
as soon as possible please.
your's respectfully.
new phone serial no:DQ******TC0
old phone serial no:DN*******T9Y
Product:
iPhone 4S
Serial Number:
DN*******T9Y
Service Requested:
December 3, 2012
Status:
Repair Complete
<Edited by Host>

No we cannot send it to you because we are users just like you and Apple does not monitor these forums.
But you can find the IMEI numbers yourself. Read the ENTIRE article:
http://support.apple.com/kb/HT4061

HT1926 When I click on the iTunes icon or iTunes from programs I get this: the item 'itunes.exe that this short cut refers to has been changed or moved.

When I click on the iTunes icon or iTunes from programs I get this: the item 'itunes.exe that this short cut refers to has been changed or moved. So this short cut will no longer work.

Let's try a repair install of iTunes first.
Restart the PC. If you're using Vista or 7, now head into your Uninstall a program control panel, select "iTunes" and then click "Repair". If you're using XP, head into your Add or Remove Programs control panel, select "iTunes", click "Change" and then click "Repair".
Can you launch your iTunes now?

I recently got a message on my screen that says "the name of your computer is already in use on this network. The name has been changed to *

I recently got a message with an exclamation mark stating "your computer name is already in use on this network. The name has been changed to ______"
How did this happen, is it phishing, malware, or did someone hit some button on here to change it. I'm hoping that someone else doesn't have access to everything on my computer now. Help!

Hello RaptorTrish,
Interesting name! You don't say what computer you are using, the OS or the nature of the network, home, office etc. Could you fill in a few details.
You are right to be concerned but there is often a simple explanation.

CME: phone number has been changed from 8 digit to 9 digit

Hi Folks,
I have a site who is in Rio, Brazil whos cell phones has been changed from 8 digit to 9 digit. In order for me to comply I need to update the dial peer/plan for CME 8.6 . Anyone who can give advice or instructions is appreciated.
e.g
Example: +551521 9691-XXXX changed to +551521 9 9691-XXXX
Thanks

here you go..
voice class custom-cptone BR-Anatel
dualtone ringback
   cadence 1000 4000 1000 4000
dualtone disconnect
   frequency 425
   cadence 250 250 250 250
voice translation-rule 1
rule 1 /^00[1-9][1-9]$.*$$/ /015\1/
rule 2 /^000[1-9][1-9]$.*$$/ /0015\1/
rule 3 /^090[1-9][1-9]$..........$$/ /9015\1/
voice translation-profile ChangeCSP
translate called 1
license udi pid CISCO2921/K9 sn XXXXXXX
hw-module pvdm 0/0
username admin privilege 15 secret 4 xxx.x.x..x.x.x.xx.x.x
username liderit privilege 15 secret 4 xxx.x.x..x.x.x.xx.x.x
redundancy
controller E1 0/0/0
framing NO-CRC4
ds0-group 0 timeslots 1-15,17-21 type r2-digital r2-compelled ani
cas-custom 0
   country brazil
   metering
   debounce-time 10
   answer-signal group-b 1
   trunk-group Vivo-E1
controller E1 0/0/1
ip ssh time-out 60
ip ssh authentication-retries 2
ip ssh version 2
translation-rule 1
interface Embedded-Service-Engine0/0
no ip address
shutdown
interface GigabitEthernet0/0
ip address xx.xxx.x.xxx 255.255.xxx.xxx
duplex auto
speed auto
interface GigabitEthernet0/1
no ip address
shutdown
duplex auto
speed auto
interface GigabitEthernet0/2
no ip address
shutdown
duplex auto
speed auto
ip forward-protocol nd
no ip http server
no ip http secure-server
ip route 0.0.0.0 0.0.0.0 xx.xxx.x.xxx
snmp-server community sparky RO
snmp-server community abc123
snmp-server location Brazil
tacacs-server host xx.xx.x.xxx timeout 5
tacacs-server directed-request
tacacs-server key 7 xxxxxxxx
control-plane
voice-port 0/0/0:0
translation-profile outgoing ChangeCSP
disc_pi_off
cptone BR
timeouts interdigit 5
timeouts call-disconnect 0
bearer-cap Speech
voice-port 0/1/0
trunk-group Vivo-Analog
translation-profile outgoing ChangeCSP
disc_pi_off
cptone BR
timeouts interdigit 5
timeouts call-disconnect 0
connection plar 6500
description ### Vivo +55 11 3078-9782 ###
bearer-cap Speech
voice-port 0/1/1
trunk-group Vivo-Analog
translation-profile outgoing ChangeCSP
disc_pi_off
cptone BR
timeouts interdigit 5
timeouts call-disconnect 0
connection plar 6500
description ### Vivo +55 11 3078-9728 ###
bearer-cap Speech
voice-port 0/1/2
trunk-group Vivo-Analog
translation-profile outgoing ChangeCSP
disc_pi_off
cptone BR
timeouts interdigit 5
timeouts call-disconnect 0
connection plar 6500
description ### Vivo +55 11 3078-9735 ###
bearer-cap Speech
voice-port 0/1/3
disc_pi_off
cptone BR
timeouts interdigit 5
timeouts call-disconnect 0
connection plar 6500
shutdown
description ### Intercom ###
bearer-cap Speech
mgcp profile default
dial-peer voice 1 pots
trunkgroup Vivo-E1
description ### PSTN inbound ###
incoming called-number .T
direct-inward-dial
dial-peer voice 2 pots
trunkgroup Vivo-E1
description ### Local Calls - Fixed ###
destination-pattern 0[2-5].......
dial-peer voice 3 pots
trunkgroup Vivo-E1
description ### Local Calls - Mobile ###
destination-pattern 0[6-8].......
dial-peer voice 4 pots
trunkgroup Vivo-E1
description ### Local Calls - Mobile ###
destination-pattern 09T
forward-digits 9
dial-peer voice 5 pots
trunkgroup Vivo-E1
description ### Long Distance Calls - Fixed ###
destination-pattern 00[1-9][1-9]..[2-6].......
forward-digits 13
dial-peer voice 6 pots
trunkgroup Vivo-E1
description ### Long Distance Calls - Mobile ###
destination-pattern 00[1-9][1-9]..[7-9].......
forward-digits 13
dial-peer voice 7 pots
trunkgroup Vivo-E1
description ### International Calls ###
destination-pattern 000T
prefix 00
dial-peer voice 8 pots
trunkgroup Vivo-E1
description ### Toll Free Calls ###
destination-pattern 00800T
prefix 0800
dial-peer voice 9 pots
trunkgroup Vivo-E1
description ### 0300 Calls ###
destination-pattern 00300T
prefix 0300
dial-peer voice 10 pots
trunkgroup Vivo-E1
description ### 0303 Calls ###
destination-pattern 00303T
prefix 0303
dial-peer voice 11 pots
trunkgroup Vivo-E1
description ### Emergency Calls ###
destination-pattern 019.
forward-digits 3
dial-peer voice 12 pots
trunkgroup Vivo-E1
description ### Service Numbers Calls ###
destination-pattern 01[0-8]T
prefix 1
dial-peer voice 13 pots
trunkgroup Vivo-E1
description ### Local Calls - Collect Calls Fixed ###
destination-pattern 09090[2-5].......
prefix 9090
dial-peer voice 14 pots
trunkgroup Vivo-E1
description ### Local Calls - Collect Calls Mobile ###
destination-pattern 09090[6-8].......
prefix 9090
dial-peer voice 15 pots
trunkgroup Vivo-E1
description ### Local Calls - Collect Calls Mobile ###
destination-pattern 090909T
prefix 90909
dial-peer voice 16 pots
trunkgroup Vivo-E1
description ### Long Distance Calls - Collect Calls ###
destination-pattern 090[1-9][1-9]..[1-9].......
forward-digits 14
dial-peer voice 22 pots
trunkgroup Vivo-Analog
description ### Local Calls - Fixed ###
preference 1
destination-pattern 0[2-5].......
dial-peer voice 23 pots
trunkgroup Vivo-Analog
description ### Local Calls - Mobile ###
preference 1
destination-pattern 0[6-8].......
dial-peer voice 24 pots
trunkgroup Vivo-Analog
description ### Local Calls - Mobile ###
preference 1
destination-pattern 09T
forward-digits 9
dial-peer voice 25 pots
trunkgroup Vivo-Analog
description ### Long Distance Calls - Fixed ###
preference 1
destination-pattern 00[1-9][1-9]..[2-6].......
forward-digits 13
dial-peer voice 26 pots
trunkgroup Vivo-Analog
description ### Long Distance Calls - Mobile ###
preference 1
destination-pattern 00[1-9][1-9]..[7-9].......
forward-digits 13
dial-peer voice 27 pots
trunkgroup Vivo-Analog
description ### International Calls ###
preference 1
destination-pattern 000T
prefix 00
dial-peer voice 28 pots
trunkgroup Vivo-Analog
description ### Toll Free Calls ###
preference 1
destination-pattern 00800T
prefix 0800
dial-peer voice 29 pots
trunkgroup Vivo-Analog
description ### 0300 Calls ###
preference 1
destination-pattern 00300T
prefix 0300
dial-peer voice 30 pots
trunkgroup Vivo-Analog
description ### 0303 Calls ###
preference 1
destination-pattern 00303T
prefix 0303
dial-peer voice 31 pots
trunkgroup Vivo-Analog
description ### Emergency Calls ###
preference 1
destination-pattern 019.
forward-digits 3
dial-peer voice 32 pots
trunkgroup Vivo-Analog
description ### Service Numbers Calls ###
preference 1
destination-pattern 01[0-8]T
prefix 1
dial-peer voice 33 pots
trunkgroup Vivo-Analog
description ### Local Calls - Collect Calls Fixed ###
preference 1
destination-pattern 09090[2-5].......
prefix 9090
dial-peer voice 34 pots
trunkgroup Vivo-Analog
description ### Local Calls - Collect Calls Mobile ###
preference 1
destination-pattern 09090[6-8].......
prefix 9090
dial-peer voice 35 pots
trunkgroup Vivo-Analog
description ### Local Calls - Collect Calls Mobile ###
preference 1
destination-pattern 090909T
prefix 90909
dial-peer voice 36 pots
trunkgroup Vivo-Analog
description ### Long Distance Calls - Collect Calls ###
preference 1
destination-pattern 090[1-9][1-9]..[1-9].......
forward-digits 14
dial-peer voice 99 pots
destination-pattern 9
port 0/1/3
forward-digits all

How can we find out data in an editable ALV grid has been changed or not?

Hi Experts,
How can we find out whether a data in an editable ALV grid has been changed or not.
I am using the
FM -> REUSE_ALV_GRID_DISPLAY_LVC
for ALV display.
I have to chekc whther data has been changed or not befor saving. if changed then only i want to
SAVE
. I cannot use the internal table comparison method for this purpose also i am not using OOP ALV.
So kindly sugest me an alternative.
Thanks and Regards,
Shahana

Hi,
Thanks for your answer. I already saw this post.
See this method.
CALL METHOD reuse_alv_grid->check_changed_data
IMPORTING
e_valid = lv_check.
This will update the internal table with the edited values. Then we can go for internal table comparison.
But my scenario will not allow me for itab comparisons.I just want to know the ALV data has been changed or not.
Regards,
Shahana

Is there a simple way to detect a textfield value has been changed on exit?

The filler may enter the textfield then type something and revert it back,
any command that can simply detect a field's value has been changed on it's exit event?

Niall,
I was thinking if there is any simple command like xfa.event.prevText in dropdown box that I can use,
anyway, thanks for your help.
Rgds.

Clicking on iTunes ikon and I get the message the item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly. What can I do, I can't open Itunes. I have over 4000 songs in iTunes that I had

When I click on the iTunes ikon I get a box pop up which reads Problem with shortcut. The item iTunes.exe that this shortcut refers to has been changed or moved, so this shortcut will no longer work properly.
My computer which is a packard bell vista operating system, recently stopped working as the power supply overheated and blew up and it has recently been sent back to the Know How team at PC world and it seems to be since it came back I now cannot open iTunes. I have also tried to search for iTunes in the search bar, I can see several files, but can't seem to open any of these either. I think that quicktime isn't working, either.
I have over 4000 songs in iTunes that I had recorded from my collectiong of CD's am going to loose all these now? Can anyone help, with very easy instructions as I really don't know what I am doing??
Thanks

I would copy over the entire thing if you have room. With iTunes 10.4 though, you can download any previous iTunes purchases you have made in the past with your current iTunes account. While in iTunes, look at the left hand side of your screen and select "Purchases" and look at the bottom right corner of the screen and select "Download Previous Purchases". If you have an iPhone, iPod and/or iPad...you can do the same thing from each device. Nice new feature...just remember that those ripped CDs need a back-up!!! Enjoy...

Facebook is my home page on Mozilla; everytime I go to log in, my browser has been changed to proxy. I have to change this every time in order to get face book to load; how do I stop the browser from changing to proxy?

My internet option state "do not use a proxy" but each time I go to long in on Firefox to Facebook, the proxy server has been changed to showing proxy and I can not get on to facebook until I go in and change it back to Do Not use Proxy. The problem is the setting does not stay but every time I go back to long on it's back to proxy server? How do I get it to not change???

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

My apple id account was hacking. My password has been changed. how do I retrieve my password?

my apple id account was hacking.
My password has been changed.
how do I retrieve my password?

Call Apple and ask for Account Security. http://www.apple.com/contact/

Office Add-in Request Definition has been changed error

Similar Messages

Maybe you are looking for