Office Assistant sending auto-reply even after Turning off

hi
I came across a strange issue wherein OoO messages are being fired from one particular mailbox even after turning off OoO Office Assistant , i checked there are no rules indeed. Please suggest.
Aditya Mediratta

Hi Amit,
This got fixed by using MFCmapi and deleting out IPM.Note.Rules.OofTemplate.Microsoft .Thanks again for your time.
Aditya Mediratta

Similar Messages

  • IMessage automatically sends as SMS even if turned off in the Settings. Is this a bug for ios 6.0.1?

    I know there's still bugs for iMessage and so when I'm not on wifi but the iMessage is turned on, I don't wait for the iMessage to fail sending. I press and hold the message to send it as text message instead immediately. Then the recepient tells me that they receive my text messages twice. So what I did today, I sent an iMessage without being connected to wifi and let it attempt to send and let it fail. To my surprise, after failing as iMessage, it automatically sent as an SMS when I had that setting turned off. Do I make sense? Do you guys also experience the same problem?

    When imessage is unavailable it sends it as SMS - that is normal see link http://support.apple.com/kb/HT3529
    troubleshooting message http://support.apple.com/kb/ts2755

  • Vacation Auto Reply will not turn off.

    I have tried to turn off the "vacation auto reply" by every means possible on the Verizon website. I can make the change, hit save, get a response back saying saved, go to another folder and come back to it, and its back on. 
    Please provide some help...

    Hello Promethesis1,
    I am sorry you are unable to disable your vacation reply mode. To help further I will need to get some more information. Please visit http://www22.verizon.com/onecms/verizonsupport?ID=promethesis1-FM secure form and we will start working on the stuck account issue.
    Thank you - Mike
    Social Media Escalations
    Mike_VZ
    Verizon Support
    Notice: Content posted by Verizon employees is meant to be informational and does not supersede or change the Verizon Forums User Guidelines or Terms of Service, or your Customer Agreement Terms and Conditions or Plan.

  • Is there a way for my MMS message phone numbers not seen by whole group even after turning off group messaging?

    I send messages to a group of people but they are all able to see each other's phone numbers and they can't tell who is sending the message because on their iphone all the numbers appear and I have turned off group messaging.  Is ther a way to prevent that from happening? 

    I am simply lookig for some help not an argument.  I am not an RF specialist however have setup a few wireless networks in my tenure at Wynn Resorts.  I fully agree that wireless networking is an art and a science however the powers that be in Network Land have toughted wireless networking is the easiest and quickest way to get two computers to talk with one another.  As I previously said I have already turned one (1) MBP in for this problem and Apple decided to replace it because they could not fix the problem with my particular MBP.  This MBP was running Leopard when the problems started
    I am having a hard time believeing that there are several other devicces in my home that depend on a wireless network to operate and my MBP is the only one having an issue.  I took this a step further and decided to see what would happen if I tried to connect wirelessly via Fusion.  In Windows 7 I am able to print and scan to my hearts content without any issues.  I am able to browse the internet as much as I want.  I close Fusion and try to connect to my printer via wireless and nothing.
    In order to get Apple to help do I need to get a Network Analyzer and capture packets when I have these problems?  Out of the 1000 + posts is there a consolidation of which answer is the best?  BTW I am accessing the internet via a wireless connection using Fusion and Windows 7.
    In response to Linc's comments, I will look at the router specifications however I did not qualify that these devices are not using the wireless connection at the same time.  Right now I would guess there are maybe two (2) or three (3) at the most that are actively transmitting / receiving information. --  Thanks

  • Sqlnet.ora trace files getting generated even after turning off tracing

    Hi,
    I have recently added the following parameters to the sqlnet.ora file.
    TRACE_LEVEL_SERVER=16
    TRACE_FILE_SERVER=SERVER
    TRACE_DIRECTORY_SERVER=/ftpland/trace
    TRACE_TIMESTAMP_SERVER=on
    Even after removing these enteries from the sqlnet.ora I still see the trave files being generated.
    #####enable tracing###################
    #Trace_level_server=0
    #Trace_filelen_server=1000
    #Trace_fileno_server=1
    #Trace_timestamp_server=on
    #Trace_directory_server=/opt/oracle/product/10.2.0/network/trace
    #Diag_adr_enabled=off
    AUTOMATIC_IPC = ON
    TRACE_LEVEL_CLIENT = OFF
    SQLNET.EXPIRE_TIME = 10
    NAMES.DEFAULT_DOMAIN = bsca.eds.com
    NAME.DEFAULT_ZONE = bsca.eds.com
    SQLNET.CRYPTO_SEED = "232166927-1713903352"
    NAMES.DIRECTORY_PATH = (ONAMES,TNSNAMES)
    NAMES.PREFERRED_SERVERS =
          (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames1.bsca.eds.com)
              (Port = 1575)
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames2.bsca.eds.com)
              (Port = 1575)
    NAME.PREFERRED_SERVERS =
          (ADDRESS_LIST =
            (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames1.bsca.eds.com)
              (Port = 1575)
    (ADDRESS =
              (COMMUNITY = TCP.bsca.eds.com)
              (PROTOCOL = TCP)
              (Host = oraclenames2.bsca.eds.com)
              (Port = 1575)
    BEQUEATH_DETACH=YES
    Regards,
    VN

    SID_LIST_LISTENER =
      (SID_LIST =
        (SID_DESC =
          (GLOBAL_DBNAME =ROSDMP.bsca.eds.com)
          (ORACLE_HOME = /opt/oracle/product/10.2.0)
          (SID_NAME = ROSDMP)
    TRACE_LEVEL_LISTENER=16
    I believe, this is the reason, you are seeing trace files even after disabling it in sqlnet.ora

  • User Account Can't access internet once parental controls used, even after turning off parental controls

    I set up a user account for my child. I am able to access the internet through firefox. I then set up parental controls and can NOT access the internet anymore. I turn off parental controls for that user account. I still can not access the internet from that account.

    Parental controls is a part of the Windows operating system and not Firefox. You can get help here: http://support.microsoft.com/ask-community/windows/

  • Firefox does not appear even after turning off my firewall please help.

    Explained before.

    Don't feel stupid. We've all done it before. Here's the whole list of Mac keyboard shortcuts that I always keep handy
    http://support.apple.com/kb/HT1343
    Glad to have been able to help.

  • My iPad 2 won't connect to wi-fi even after turning off the device. Help?!

    Someone help. My wifi works at home but it doesn't seem to connect here at my parents house? Why

    I have the same problem but with my Ipod touch

  • My ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that it my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked?

    my ichat is saying that my password isn't right and then after 20 tries I get in but some of my friends say that my account tries to request video chats to them when i am not online and sends auto reply messages when i haven't set that up. Am i hacked? This has also happened to alot of my friends on my buddy list
    is it a bug or have I been hacked

    System Preferences > Network > your-connection-medium > (Assist me) > ( Diagnostics )
    This sometimes provides additional helpful information, sometimes not so much.

  • Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    Even after turning ON Reduce motion the icons and the windows and the apps zoom motion in and out is still giving me a lot of head ache and dizziness and motion sickness... Please fix it!!

    hi i had the same problem today when i updated my itunes to latest version. however, i have just found my songs in the 'itunes media' folder. this was accessed through 'my music'  then keep clicking through until you find itunes media and all my library songs were in there and i then just added these files to my library and all were restored however, i have lost all my playlists but at least my 700 songs are back. very dissapointed with apple that they have let this happen with their latest update, the previous version was miles better than this one . hope you find them. stevo

  • After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping

    After the new update my ipad4 will not do a full recharge even when turned off overnight and the battery goes flat it 2 hours  it is driving me crazy as I had to stop all apps but still not helping but my iPhone 5 is great no troubles at all HELP

    Do you place the ipod in the dock during the night? I did this once and the other day the battery was almost empty because it kept on playing after it rested in the dock.
    Here is more info about battery life and exchange program: http://support.apple.com/kb/HT1322
    and http://www.apple.com/support/ipod/service/battery/

  • HT4550 My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do i remove it

    My safari is permanently on safe mode even after turning it of the pages refresh it goes back into safe mode how do I remove it.

    Hold the shift key down and launch Safari.
    If not, try  suggestions made in this article.
    http://reviews.cnet.com/8301-13727_7-57393558-263/tackling-macs-that-always-boot -to-safe-mode/
    Best.

  • After turning off private browsing Safari crashes immediately upon launch.

    After turning off private browsing Safari crashes immediately upon launch. I tried soft-resetting, and clearing my cookies and cache. I basically launches in private browsing mode and then immediately tries to switch to regular browsing. When the screen changes, it crashes to desktop.
    Any ideas, other than wiping my iPad?
    (I'm using iOS 5, of course, but it is not available under the Operating System dropdown in this forum)

    I'm seeing the same problem, and it was repeatable for me.  iPad (original 3G, 64GB), iOS 5.  (There are now a couple threads with this same problem.)
    Once the crashes start, it would continue to crash every time I tried to bring up Safari.  It crashes just as it finishes showing the tool bars, but before any content is displayed.
    Manually killing the app did not make the problem go away.
    One time, shutting down and restarting the iPad fixed it, but that solution did not work the next time I went in and out of Private browsing.  Also, once the crashing begins, going back into Private browsing did not stop the crashing.
    The last time it got into the crashing condition, I stopped the crashing by turning off the setting to display the Bookmark bar.  Strange!
    I have like 20 Safari crash logs that I hope will get auto-sent to Apple sometime today (I reenabled the send data to Apple option).

  • Notebook showing network activity after turned off

    Hi, after turn off my notebook HP Probook 4540s with connected ethernet cable and power source, the RJ-45 connector on my notebook still indicates(LED shines) like there is a network transmission in progress. If I disconnects ethernet cable, indication stops. When I reconnect it back, it starts indicating agian. I thought it was by bios settings something like boot on lan, but it doesn't seem so. Is it common for RJ-45 port to indicates even when is computer turned off? Also I have d-link router, maybe is it a d-link setting?
    How to disable network indication when is computer turned off?

    I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this HERE.
    http://h30499.www3.hp.com/hpeb/
    HP ProBook 4540s Notebook PC Support
    TwoPointOh
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the bottom to say “Thanks” for helping!

  • Efax 7510 still won't work after turning off/on ePrint several times

    I'm trying to send an eFax over and over after turning off and on the ePrint button under the webservices menu but without any success. The message keeps stating that it's not connected to a network. I am 100% sure that it is connected to my wireless network because I check that out and print a copy of the page stating that this printer is connected.
    What could the problem be? Please help!

    Hi daisyforu,
    Welcome to the HP Support forums.  I understand that you are getting an error message about not being connected when you try to enable the web services for your Photosmart 7510.
    The error message you are receiving is indicating that the printer doesn't have an independent connection the internet.  Please set a static ip address and manual DNS servers by following the steps below.
    1)       Please enter the ip address of the printer into the address bar of your browser (Internet Explorer, Chrome, Firefox, or Safari, etc). My screen shots below are from Safari but the location of everything is the same regardless of the browser.  This will bring up the embedded web server of the printer.
    2)      Please click on the network tab.  You should see the Network Summary for your printer. Please click on 'Networking' on the left hand side menu.
    3)      Please click on 'Network Address (IP)' on the left hand side menu.
    4)      Please on the radial button beside "Manual IP" then click on "Suggest a Manual IP Address" button. The Manual IP address, Manual Subnet Mask and Manual Default Gateway should populate for you.  Please click on radial button beside "Manual DNS Server".  For the Manual Preferred DNS Server please enter 8.8.8.8 and for the Manual Alternate DNS Server please enter 8.8.4.4.
    5)      Please click on 'Apply'.  If you get a warning message about changing the ip address please click 'OK'.
    6)      Please turn the printer off by the printer's power button.  Please wait a minimum of 15 seconds and then turn the printer back on.
    7)      Please press the ePrint icon in the upper left hand corner of the printer's front panel. This should prompt you to accept the terms of service.  Please choose 'Accept'.
    8)      When prompted about the automatic updates please choose 'Yes'. The printer should now show the HP logo while the printer communicates with the HP servers. The Web Services information sheet should print with the claim code for your printer.
    Now that you have the ePrint feature is turned on before using the Fax feature I would recommend that you customize your ePrint email address.  I have included a document here on how to do that.
    You should now be able to get your eFax setup.  I have included a document for you on how to do this here.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

Maybe you are looking for