Office Communicator 2007 R2 IM not visible when in Chating with Group (Communicator Group)

Hi,
We are facing a issue when user IM is not visible when he chats with the group which he created in his Office Communicator Client.
Whereas he can send IMs to individual who is a member of that group in the same time.<o:p></o:p>
Need any suggestions on this.
Thanks in advance.

Hi,
Please check if there is any error message on OCS Server.
Please also check if all OCS Services on OCS Server started as well.
Please try to check the following link:
http://support.microsoft.com/kb/980043
Best Regards,
Eason Huang
Eason Huang
TechNet Community Support

Similar Messages

Autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not visible after converting excel

Hello, I am having an issue with Autocad 2010 drawings not showing up in a pdf document. Normally, I cut and paste part of an Autocad 2010 drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe Distiller, I convert the Excel spread sheet into a pdf document for propriatary purposes. However, recently the drawing pasted into Excel will not fully appear on the pdf, the drawing is cut off past a certain point. The drawing will print normally in Excel, but in pdf will not print normally. If the drawing is shrunk below the "cut off" point, it appears normally. If the drawing is expanded above the "cut off" point, any additional image is lost. Any suggestions on how to fix the problem would be appreciated.

See "[Creating, Editing & Exporting PDFs] How to correct bad PDFdisplay
of Excel 2007 graph-Adobe ProX?" and similar discussions. Are you
scaling it to less than 100%?
Jeffry Calhoun
Workforce Analytics Manager
Ohio Department of Job & Family Services
P.O. Box 1618, Columbus, OH 43216-1618
InterAgency: F376, 4020 E. 5th Avenue
614-644-0564
Fax 614-728-5938
[email protected]
OhioMeansJobs.com -
The next best thing to having an HR department.
OhioMeansJobs.com -
Ohio's premier website for connecting businesses and job seekers -
quickly, easily, and for free!
>>> jblairdynis <[email protected]> 4/19/2012 10:44 AM >>>
autocad 2010 drawing pasted in microsoft excel 2007 spread sheet not
visible after converting excel created by jblairdynis (
http://forums.adobe.com/people/jblairdynis ) in Creating, Editing &
Exporting PDFs - View the full discussion (
http://forums.adobe.com/message/4346704#4346704 )
Hello, I am having an issue with Autocad 2010 drawings not showing
up in a pdf document. Normally, I cut and paste part of an Autocad 2010
drawing into a Microsoft Excel 2007 spread sheet. Then, using Adobe
Distiller, I convert the Excel spread sheet into a pdf document for
propriatary purposes. However, recently the drawing pasted into Excel
will not fully appear on the pdf, the drawing is cut off past a certain
point. The drawing will print normally in Excel, but in pdf will not
print normally. If the drawing is shrunk below the "cut off" point, it
appears normally. If the drawing is expanded above the "cut off" point,
any additional image is lost. Any suggestions on how to fix the problem
would be appreciated.
Replies to this message go to everyone subscribed to this thread, not
directly to the person who posted the message. To post a reply, either
reply to this email or visit the message page:
http://forums.adobe.com/message/4346704#4346704
To unsubscribe from this thread, please visit the message page at
http://forums.adobe.com/message/4346704#4346704. In the Actions box on
the right, click the Stop Email Notifications link.
Start a new discussion in Creating, Editing & Exporting PDFs by email (
mailto:discussions-community-acrobat-creating__editing_%[email protected]
) or at Adobe Forums (
http://forums.adobe.com/choose-container!input.jspa?contentType=1&containerType=14&contain er=4697
For more information about maintaining your forum email notifications
please go to http://forums.adobe.com/message/2936746#2936746.
Ohio Means Jobs
You're looking for something unique. Use more than an ordinary site.
http://www.ohiomeansjobs.com
This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain private, confidential, and/or privileged information. Any unauthorized review, use, disclosure, or distribution is prohibited. If you are not the intended recipient, employee, or agent responsible for delivering this message, please contact the sender by reply e-mail and destroy all copies of the original e-mail message.

TS1506 My attachment symbol is not visible when I am sending an email. How do I get it back?

Attachment option is not visible when sending an email through aol.com.

When you are composing an email tap at the location you want to insert a photo or video. The option to insert comes up. Tap on that and select the photo or video you wish to insert.
Alternately you can use the Photos app and select up to five photos to insert into an email. Tap select, select the photos and then tap the Share icon. Select Mail and an email will be created. You can then address the email, add a subject and type in content.
To attach other things like a PDF, Word Doc, etc. you need to use the app that creates or edit seize items. Again select the item you want to email and tap on the Share icon in the appropriate app.

Field not visible when uploading the file in application ser

Hi,
I have added a new field at the end of a structure and When i upload the data in the application server it is not visible there. The new field length is 30chars(say field 'A') and the one just before this one is 250 chars(say field 'B'). When i reduce the length of field 'B' to 30 chars or 40 chars the value which i populated in field 'A' is visble in the output file.
Since the complete file was not visible in AL11 transaction, i used the CG3Y tcode as well to download the data to presentation server so that i can view the complete file. Even after downlaoding in presentation server the new field value is not visible.
Can anyone please suggest why is the value in field 'A' not visible when the length of field 'B' is 250 chars? Also, how can i display the value of the new field in the application server.I cannot change the layout of the structure as per the requirement. Any help will be very useful.
Thanks in advance,
Sneha.

Hi Sneha.. Happy new year
<you subject is missing ver from the server, thats why your server doesnt like you :P>
-ok, lets go step by step. how did you upload the file?
-after uploading the file check the file in OS level(goto SM69, execute CAT, in additional parameter (not in parameter) give the full path (case sensitive), execute. ). here you can see the actual content of the file... check you data is present or not
-which structure are you using to download and upload? a temp work area.. then please provide the WA details, so that i can try on my system.
lets see what happens next
one more thing: regarding AL11, it can read upto length 510 characters. check program RSWATCH0 form SHOW_FILE. here the read dataset into butffer is 510 characters.

My firefox toolbars are not visible when I open firefox

All of my firefox toolbars are not visible when I open firefox. I get the tabs but no command menu no search bar or any other toolbar icons help!!
== This happened ==
Every time Firefox opened
== when I logged on one day about 2 weeks ago ==
== User Agent ==
Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/533.16 (KHTML, like Gecko) Version/5.0 Safari/533.16

'''Can't see the Menu Bar''' (File, Edit, View, History, Bookmarks, Tools, Help)?
Turning the Menu Bar on and off is a new feature in version 3.6.
''(Linux & OSX see: [[Menu bar is missing]] )''
''Windows'' Method 1. '''''Hold down''''' the key and press the following letters in this exact order: V T M
''Windows'' Method 2. Press and release the key. The Menu Bar will be displayed; then choose ~~red:V~~iew > ~~red:T~~oolbars and click on ~~red:M~~enu Bar.
The Menu Bar should now be displayed permanently, unless you turn it off again using View > Toolbars. Check mark = displayed, NO check mark = not displayed.
See: http://support.mozilla.com/en-US/kb/Menu+bar+is+missing
'''Navigation Toolbar, Bookmarks Toolbar and other Toolbars''' under View > Toolbars. Clicking on one of them will place a check mark (display) or remove the check mark (not displayed).
'''To display the Status Bar''', View, then click Status bar to place a check mark (display) or remove the check mark (not displayed).
'''Full Screen mode'''
http://kb.mozillazine.org/Netbooks#Full_screen
Also see:
''' [[Back and forward or other toolbar buttons are missing]]'''
'''[[Navigation Toolbar items]]'''

Macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

macbook pro camera produces a lot of green particles on my screen which are not visible when i take a picture or on the screen of a skype partner. Does anyone have a solution for this problem

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 Vista Ult64

CS3 Postscript fonts not visible when Installed with Suitcase 11.0 on Vista Ultimate 64bit.
Truetype and Opentype work fine. I have searched through all the forums here multiple times, but not found a solution. The only workaround I found was to manually put the font files in c:/ProgramFiles(x86)/CommonFiles/Adobe/Fonts.
When I put any font files in that folder, they show up in CS3 for use, but not in windows apps. I thought I would make a permanent work around by placing all of my uninstalled font files in that folder, then use suitcase to install them from there. That didn't work because EVERY font in that folder is available to CS3 and turned on. Do they get installed when you put them in there?? It didn't seem like they were installed, and windows apps didn't see them.
These are workarounds anyway. My main goal is to have suitcase work so I can organize my fonts efficiently. Extensis blames the font and CS3. I have read that there are adobe issues with other font management software as well as suitcase. Any help would be appreciated.

Got mine FIXED here is what i did:
Windows 7 64bit SP1, CS 5
Postscript fonts (comprising of *.pfb + *.pfm files) did not show up in any CS5 app, but showed OK in Word, Excel, Notepad etc.
Tried activating through Suitcase Fusion 2 and also through FontExpert 2009 - but neither of them made the fonts visible in CS5 apps
1) open Start Menu/Control Panel/Fonts
2) on the sidebar there is "Font settings" item
3) set the settings as i did
[ ] Hide fonts based on language settings
[ x ] Allow fonts to be installed using a shortcut (advanced)
FIXED mine,
now i can use Suitcase Fusion 2 to install any PFB/PFM fonts without any problems...
PLEASE IF THIS WORKED FOR YOU TOO, LEAVE A MESSAGE HERE SO OTHERS KNOW IF THIS FIX IS 100% WORKING

JTree not visible when compiled

I have a problem that my JTree is not visible when i export my project to jar file.
along with a button also. I have no idea why this may be happening so maybe some of you guys have heard of this before ?
the JTree is visible when running in Eclipse etc
any ideas?

JTrees shouldn't be visible when you compile, they should be visible when you run the application :)

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Hi guys i have an macbook 13 late 2007 and does not work when i start it up all u can see is blank white screen and after that its keep bepping high peech tone 3 times i was thinking the hard drive but im not too sure please guys help.

Try to reset the PRAM first then go from there.
http://support.apple.com/kb/HT1379

Project Commitment Cost not visible for Purchase Orders with Item Categry Q

Hello All
I have a problem. My project commitment cost is not visible for PO's with Item Category Q. I assume that as the stock can be issued against any WBS elements I might not be able to see the cost against a single WBS element. But the cost should get recorded against the project right? If so where can I see it?
Request your help with this problem
Regards
Renjith

Hello
Could you please explain how to maintain that?
Best Regards
Renjith

Communicator 2007 r2 does not save chat history in outlook 2013

hi ,
i was using win7 64 bit enterprise edition with outlook 2010 & communicator 2007 r2, whatever i chat everything would be saved in conversation History automatically and every
was fine. i recently migrated to windows 8 64 bit enterprise edition with outlook 2013 & communicator
2007 r2. Issue : my chat history does not saves in conversation history , when i click on tools >> option >> personal information manager, is degraded.
if i try to save it manually that is also grade out.
can anyone please help to fix this.
Regards,
Raghavendra R

Hi，
Please make sure you have installed the latest version of communicator.
I want to confirm if the option has been selected even the PIM section is grayed out.
Please try to repair Office to test the issue.
Kent Huang
TechNet Community Support

After Effects are not visible when exporting in Adobe Premiere Pro CS4

I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

The names are the same, but the programs are very different... CS4 is 32bit, CS5 and later is completely rewritten to be 64bit
So, there is a different forum for CS4 and earlier http://forums.adobe.com/community/premiere/premierepro_previous?view=all

Why are shared files not visible when iPhone4S connected to iTunes?

What makes this problem mysterious is that I have exactly the same settings on the same or eqivalent Apps on iPad2 and iTunes4S but when my iPhone is connected to my iTunes (running on my PC under Win7) it shows no files on Apps like Pages, iBooks, Keynote, and Print-n-share. Each of these Apps has files and each shows files when I connect my iPad2. I cannot export or import filesto/from itunes and iphone because the list of files inside the Apps is not visible in itunes.
PS I CAN, btw, export and import files by using the amazing App and service "DropBox" which is the only route in and out of my iPhone (I am not ready to use iCloud).

This is not a reply but an addition. While searching for answers as to why "Shared" files in original Apps in my iPhone4S did not appear on itunes I came across a similar discussion on another Forum in which Jim described in some detail how to get the two devices (my iPhone 4S and my iPad2) to recognize similar embedded files in similar Apps. https://discussions.apple.com/message/16690584#16690584
I went through this promising procedure but it did not help. Since the two devices are independent (I think -- they are on the same accoubt but ar different devices) I should be able to make them work the same way with regard to what is seem in iTune.

After Effects are not visible when exporting in Adobe PP CS4

Hi all of you experts!
I have made a simple name/title bar for an interview video, using Adobe After Effects. When i import the composition to Premiere Pro it's visible in the preview window BUT; when I render the video in Premiere Pro the After Effects clip is not visible anymore. AND when i export the complete sequence to a .wmv file, the After Effects clip is not visible either.
I'm not that much of an expert in Premiere Pro or After Effetcs, so hopefully this can easily be solved.
What is it that i'm doing wrong?
Thanks in advance!

Thanks for your reply!
Is there any specific firmat i should export as? I have only tried as a *.AE file (which does not show on the final video) and as a *.MP4 file (whick does not have a transparent background - so i cannot use this)

Default values for static report parameters are not visible when scheduling

Hello
Crystal Reports 2008 Dev
Crystal Reports Server 2008
When I publish a report to the repository and then try to schedule that report, the default value that I have set for a static parameter in the report is not visible.
In the Parameters section of the Scheduling wizard this parameter is marked as [EMPTY]
However, when I View the report (right click and select View) from within Infoview, the parameter default value is visible
I have published in the following 3 ways:
Publishing Wizard
File > Save As > Enterprise from withing Crystal Reports Dev
CMC > Folders > Add > Crystal Reports
The results are the same for each method of publishing.
To try to eliminate any DB issues etc i have created a report that is not attached to a datasource.
This test report has one Static parameter.
I have set 3 values for its list: Entry A, Entry B, Entry C
Entry X is set as the parameter Default Value
The parameter is placed in the details section of the report
When the report is Viewed it will prompt for parameter entry, with the default value present
When I try to schedule the report is will not have an entry for its parameter
It seems to me that the default values for parameters should be retained from report design through to report schedule, especially when the default values are retained from report design to report View
Is this a config problem that i have ?
Can anyone help me with this ?
Best regards
Patrick Coote
Edited by: PATRICK COOTE on Oct 2, 2008 2:08 PM
Edited by: PATRICK COOTE on Oct 3, 2008 9:23 AM

Hi Robert
Thanks for the reply and apologies for not responding sooner.
What i have found is that if i use Publishing Wizard to upload reports it is then possible to set values for prompts during the last step of this process.
Although this is a bit clumsy, it is sufficient for now
Best regards
Patrick

Office Communicator 2007 R2 IM not visible when in Chating with Group (Communicator Group)

Similar Messages

Maybe you are looking for