Office extend option not seen under flexconnect

I have a 2602i , registered on a virtual controller with 7.6.130.0, running in flexconnect mode, but I dont see office extend option under flexconnect, any comments ???

well I could not find an evaluation dtls lic for virtual controller, so I installed a 7500 controller dtls lic and it shows in use and data encryption is enable on AP, still i don't see office extend option.
I am not sure its because I am using a 7500 dtls licence.
>show license summary
License Store: Primary License Storage
StoreIndex: 0 Feature: data_encryption Version: 1.0
License Type: Permanent
License State: Active, In Use
License Count: Non-Counted
License Priority: Medium

Similar Messages

[Solved] External USB 3.0 drive not seen under /dev/sd*

Ok, thought this would be easy but for some reason I cant get arch to see the physical drive. Its a new Seagate 2TB external USB 3.0 drive. I connected it to a windows laptop and it was quickly recognized (ntfs). I then installed ntfs-3g but still cant see it. I then formatted it under windows as ext4, but its still not seen. I tried this with 2 arch PC's, both the same issue. I seen a few other posts and tried a few things like making sure the mod xhci_hcd was running. I have the latest updates on each system. fdisk -l does not show the device at all! I can see and boot to other USB devices fine just not this one, maybe since its USB3.0??
I noticed here, they talk about maybe USB3 is broke in the new kernels, after 3.10.2 maybe?
Similar issue: https://bbs.archlinux.org/viewtopic.php?id=126299
Possible bug: https://bugs.archlinux.org/task/36296
However, I would think that by now, this would have been fixed as USB3.0 is more common? Other than trying to find a OLD 3.10.2 kernel any other advice?
dmesg:
[47653.187708] usb 6-1: new SuperSpeed USB device number 2 using xhci_hcd
[48258.419876] r8169 0000:02:00.0 enp2s0: link down
[48435.623148] usb 6-1: USB disconnect, device number 2
[48697.691980] usb 6-1: new SuperSpeed USB device number 3 using xhci_hcd
[48938.171094] usb 6-1: USB disconnect, device number 3
[48975.057438] r8169 0000:02:00.0 enp2s0: link up
uname -a
Linux 3.15.7-1-ARCH #1 SMP PREEMPT Mon Jul 28 20:06:17 CEST 2014 x86_64 GNU/Linux
lsusb: (Seagate USB)
Bus 008 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 007 Device 003: ID 046d:c50e Logitech, Inc. Cordless Mouse Receiver
Bus 007 Device 002: ID 046d:082d Logitech, Inc. HD Pro Webcam C920
Bus 007 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 006 Device 004: ID 0bc2:ab20 Seagate RSS LLC
Bus 006 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 005 Device 002: ID 05af:8366 Jing-Mold Enterprise Co., Ltd
Bus 005 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 013 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 010 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 012 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 009 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 011 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
lsmod:
Module Size Used by
uvcvideo 74983 0
videobuf2_vmalloc 3368 1 uvcvideo
videobuf2_memops 2239 1 videobuf2_vmalloc
videobuf2_core 30407 1 uvcvideo
snd_usb_audio 131860 0
videodev 123032 2 uvcvideo,videobuf2_core
snd_usbmidi_lib 21428 1 snd_usb_audio
snd_rawmidi 20278 1 snd_usbmidi_lib
media 12611 2 uvcvideo,videodev
snd_seq_device 5244 1 snd_rawmidi
mousedev 10912 0
evdev 11784 8
mac_hid 3273 0
kvm_amd 52987 0
kvm 408583 1 kvm_amd
microcode 17157 0
serio_raw 5073 0
pcspkr 2059 0
k10temp 3242 0
snd_hda_codec_realtek 54803 1
r8169 59191 0
snd_hda_codec_generic 56366 1 snd_hda_codec_realtek
mii 4251 1 r8169
shpchp 25706 0
snd_hda_codec_hdmi 40396 1
radeon 1361721 21
snd_hda_intel 22831 1
snd_hda_controller 22975 1 snd_hda_intel
snd_hda_codec 104665 5 snd_hda_codec_realtek,snd_hda_codec_hdmi,snd_hda_codec_generic,snd_hda_intel,snd_hda_controller
ttm 67215 1 radeon
snd_hwdep 6652 2 snd_usb_audio,snd_hda_codec
snd_pcm 83207 5 snd_usb_audio,snd_hda_codec_hdmi,snd_hda_codec,snd_hda_intel,snd_hda_controller
snd_timer 19294 1 snd_pcm
drm_kms_helper 39643 1 radeon
snd 61276 14 snd_hda_codec_realtek,snd_usb_audio,snd_hwdep,snd_timer,snd_hda_codec_hdmi,snd_pcm,snd_rawmidi,snd_hda_codec_generic,snd_usbmidi_lib,snd_hda_codec,snd_hda_intel,snd_seq_device
tpm_infineon 7786 0
tpm_tis 9310 0
soundcore 5551 2 snd,snd_hda_codec
tpm 23363 2 tpm_tis,tpm_infineon
hwmon 3346 2 k10temp,radeon
i2c_algo_bit 5480 1 radeon
i2c_piix4 10801 0
button 4765 0
processor 25153 0
vboxvideo 2029 0
drm 244846 25 ttm,drm_kms_helper,radeon,vboxvideo
i2c_core 41648 6 drm,i2c_piix4,drm_kms_helper,i2c_algo_bit,radeon,videodev
pci_stub 1381 1
vboxpci 15059 0
vboxnetflt 17700 0
vboxnetadp 18547 0
vboxdrv 345858 3 vboxnetadp,vboxnetflt,vboxpci
ext4 494420 3
crc16 1359 1 ext4
mbcache 9155 1 ext4
jbd2 82948 1 ext4
sd_mod 37554 4
sr_mod 15026 0
crc_t10dif 1135 1 sd_mod
cdrom 35191 1 sr_mod
crct10dif_common 1436 1 crc_t10dif
ata_generic 3434 0
pata_acpi 3579 0
hid_generic 1217 0
usbhid 41250 0
hid 93052 2 hid_generic,usbhid
atkbd 17006 0
libps2 4571 1 atkbd
i8042 13666 1 libps2
serio 11018 4 serio_raw,atkbd,i8042
pata_atiixp 5163 0
ohci_pci 4192 0
ehci_pci 4152 0
ohci_hcd 35606 1 ohci_pci
ehci_hcd 64619 1 ehci_pci
ahci 24299 3
libahci 21772 1 ahci
xhci_hcd 149286 0
libata 174089 5 ahci,pata_acpi,libahci,ata_generic,pata_atiixp
usbcore 188509 9 snd_usb_audio,uvcvideo,ohci_hcd,ohci_pci,snd_usbmidi_lib,ehci_hcd,ehci_pci,usbhid,xhci_hcd
scsi_mod 138333 3 libata,sd_mod,sr_mod
usb_common 1712 1 usbcore
Last edited by banshee28 (2014-08-05 02:27:01)

R00KIE wrote:
Make sure you haven't blacklisted the uas driver. If the uas driver does not work well for you, check here [1] how to disable it for a particular drive.
[1] https://bbs.archlinux.org/viewtopic.php?id=183190
Awesome, THANKS!! Yes I got it to work following this and specifically Da_Coynul's post:
I was able to get my external drive working again by telling the usb-storage module to ignore uas for the device. Here is how to do it:
First, create a file named ignore_uas.conf in the /etc/modprobe.d directory containing the following*:
options usb-storage quirks=Vendor_ID:Product_ID:u
*(substitute your actual Vendor_ID and Product_ID obtained from the lsusb -v command).
Next, regenerate your inital ramdisk:
# mkinitcpio -p linux
Finally, reboot your computer.
Although this is not a solution to broken uas, at least it will let you use your drive as before hmm
https://bbs.archlinux.org/viewtopic.php … 2#p1428782
Thanks everyone...Now I can see the drive, and will work on formatting it with XFS...

Package not seen under user sys!

hello;
I view packages under sys user;
but not our package seen under sys; I create it with user sys
any idea
regrads
siyavus

11g R1
11.1.0.7
create or replace procedure SYS.mailserver_acl(
aacl varchar2,
acomment varchar2,
aprincipal varchar2,
aisgrant boolean,
aprivilege varchar2,
aserver varchar2,
aport number)
is
begin
DBMS_NETWORK_ACL_ADMIN.DROP_ACL(aacl);
dbms_output.put_line(‘ACL dropped…..’);
exception
when others then
dbms_output.put_line(‘Error dropping ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
begin
DBMS_NETWORK_ACL_ADMIN.CREATE_ACL(aacl,acomment,aprincipal,aisgrant,aprivilege);
dbms_output.put_line(‘ACL created…..’);
exception
when others then
dbms_output.put_line(‘Error creating ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
begin
DBMS_NETWORK_ACL_ADMIN.ASSIGN_ACL(aacl,aserver,aport);
dbms_output.put_line(‘ACL assigned…..’);
exception
when others then
dbms_output.put_line(‘Error assigning ACL: ‘||aacl);
dbms_output.put_line(sqlerrm);
end;
commit;
dbms_output.put_line(‘ACL commited…..’);
end;
Edited by: sak on Jul 1, 2010 4:36 PM

Startup items options not found under user name

I'm sure this has been covered before, but I couldn't find an exact match.
Under the accounts setup-one of the profiles does not have "Login Items" as an option, only has Password, Picture, and Parental Controls. I have full access as administrator to all accounts. How do I get the Login Items Options to show up?
On a larger issue, the reason I would like to access the user account login items is to turn on DirectfonfigX for that login, the particular login will not work with a DVI connection. (Display may be set to VGA, I don't recall the exact reason why it does not work with the same DVI connection as normal login user. they are basically the same user profiles, but I can access some software under one user that the other user will not recognize that I have registered my software, or profile settings. But perhaps that is an even larger issue.)

Sam,
Just ran a test here--Login Items are only available for the currently logged in account (owner of the keyboard/mouse/display). You'll have to log in as each of those users and set the login items appropriately. Seems that an admin should be able to set these but not so.

IPCC extension option not found under End user on CUCM

Hi
I have a new deployment for UCCX express with CCM V 9.1, when i am trying to go under End user to assign the extension which will be user for IPCC , unfortunately i did not find IPCC extension option , i only find primary extension .Please help. I am unable to see the tab of IPCC extension , only find the selection for primary extension.The integration already done , everything is ok between CUCM & UCCX. + phone services for IPCC subscribe for end users
Thanks

Hi
+5 for MR/Chris
1- This is famous for fresh installation , especially on Vmware , kindly try to ssh CUCM and type the following:-
admin:run sql select paramname,paramvalue from processconfig
where paramname like '%nstalled%'
Thanks
Please rate all useful information

HELP!!! New U110 - Extended Warranty not listed under my S/N!?!?!

I just received a new IdeaPad u110 and purchased 3yr at home service warranty but when looking up my S/N on the Lenovo support site it states that the system is only covered under warranty until 2009-08-10. I completed the online customer registration thinking maybe that would change the date but it did not. The order status/shipping email I received from Lenovo lists my extended warranty purchase and it's part number (45J8002 3YR ONSITE IPAD SVS UPGRADE) and I was billed for it.
Does it not show up on the site or go in effect until the standard one year expires? I just want to mke sure everything is squared away to avoid future problems should I need the warranty service. Any help is appreciated.
Thanks!
Message Edited by habebert on 11-13-2008 03:30 PM

I think your warranty is allright. Onsite base shows only warranty that is given to all systems by default.
No reason to panic =)
Message Edited by skripatch on 11-14-2008 08:10 PM
//help will save the world

Safari 5.0 - Disable local file restrictions Option not found under Develop Menu

Hi All,
My system specs are as follows :
Platform : Linux
OS : lubuntu
OS Version : 13.10 Saucy Salamander
Browser : Safari 5.0
I need to open a html file in Safari before which I need to enable this option - "Disable local file restrictions" under Develop menu as available in Safari 7.0 for OS X Marvericks.
Problem here is I am not able to find this option in Safari 5.0, also I am not able to find any way to upgrade Safari in Linux.
Please suggest how can I activate this.

Safari->Preferences->Advance->on the bottom. To get the Debug menu which includes a listing of Keyboard & Mouse Shortcuts, among other useful things, run this in the Terminal app and quit & relaunch Safari:
*defaults write com.apple.Safari IncludeInternalDebugMenu 1*

EHD under snow leopard not seen under maverick

Hello Apple Community,
I've recently bought a brand new Macbook pro under Maverick. The External Hard Drive, used on my old Macbook air under snow leopard, is not recognized by Maverick. That's strange because it is seen and can be used on the other laptop, but not on the new one.
In the finder preferences, the box "show EHD" is checked.
But when I use the disk utility, it sees only the hard drive on the laptop, not the EHD...
Does anybody have a solution for this?
Thank you>

Keep the old OS around and just kick the tires and test new OS. Apple has a history and habit of breaking support in things like this.
You can use TimeMachine as one level of backup, and even there there were changes with Lion, I would always recommend foremost backup clones of every volume. And clone (SuperDuper etc) can be stored on something like HP NAS Media Server which also was supporting TimeMachine, iTunes - until Apple made that harder and more their own proprietary format.
Apple AirPort Time Capsule Support
Lion Communities
Cloning as a Backup Strategy
Rather than "upgrade" I would clone the system, and do a clean install, then allow Setup Assistant to import your files.
Others who are asking the same question:
http://www.bing.com/search?q=mac+os+x+lion+WD+My+World+NAS

Tablespace Option not found under Storage Menu (OEM 12c Express)

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

Hi Guys,
Am not able to see the Tablespace option under the Storage menu in ORacle enterprise manager express 12c.
Is there anything we need to configure for that? any ideas please help me?
Thanks,
Sunil

Table option not appearing under Webitems

Hi frds,
I am unable to see 'Table' option under webitems-->standard tab in web application designer so that i am unable to browse the bex query
we r using BI7.0 (first time im opening web appl designer)
is there any settings we hav to perform
thanks

Hi AHP,
thanks for ur response..
i dragged 'analysis' ti righside and selected query..
when i execute that query i am geting below error
Mess name RSBOLAP 017
Java Comm Error:RFC Destination Not_configured does not exist.
Diagnosis
An error occurred during communication with the BI components on the SAP J2EE Engine.
System Response
Procedure
Contact your system administrator to have the error analyzed in detail.
Procedure for System Administration
SAP Note 888687 provides detailed instructions on analyzing communication and log-on problems.
Can you help me in this ..
thanks

C3-00 WLAN option not available under connectivity...

Hello, newbie here. i just bought a C3-00 for my son to use. The only reason i purchased it is becasue it is supposed to have wifi, and it was $50 more than the phone i was going to get which does not have wifi, so i hope the extra money has not been wasted.
The software version on the phone is v3.65 26-01-11, RM-614.
under connectivity there is no WLAN option.
there is bluetooth, packet data, and usb data cable, but no WLAN option.
the manual does not mention WLAN, but if i search online i see lots of people talking about using wifi.
i thought it was because i was back level, so i downloaded nokia software updater, and connected the phone to my laptop.
it tells me that 3.65 is the latest software version even though the nokia support page says it's at 8.7.
so i'm stuck.
i can't update the software, and i don't have the WLAN option.
can anybody help before i send the phone back??

same problem.. I've just bought my C3-00 and I can use my home wlan connection but at university there is a wpa2 enterprise wifi network... I can see the network but I can't save/connect in it.
People with other nokia models can connect in an easy way, how can I connect? I need another phone or I have just to change some hidden options?

Deployed portlet not seen under New channel drop down

Hi,
I need to add a new portlet to my portal so user can select it under her content configuration page.
I have added the new portlet to a user's profile via the portlet admin console.
But the new portlet channel is not available in user's content configuration page.
Any Idea ?
(i'm working on Sun ONE Identity Server 6.1 and Sun ONE Application Server 7.0.0_01 on Solaris 5.8).
Thanks in advance.
Best Regards,
Iris

Hi,
This problem occurs when display profile is not updated with portlet provider for some reasons
Tips :
1. Please check if Webcontainer instance is up.
2. login to psconsole -> portals tab -> click on the portal name -> Click Add dn button and search for the dn to which you deployed the portlet -> Add it -> select
it from the select DN listbox and then download the display profile(dp)
If the portlet provider which you deployed is not present in the display profile
, then please undeploy the portlet and try deploying again.
3) Before running the the portlet deploy, set the logger to FINEST and see if any errors are thrown, basically if should show dp updated and war file deployed.
./psadmin set-logger -u amadmin -f ps_password -m pas -O debug.com.sun.portal -L
FINEST
tail -f /var/opt/SUNWportal/logs/admin/portal.0.0.log

Imported Objects Option Not available Under SWCV ?

Hi Experts,
I need to Import Idoc from R/3 system.
But I am Unable to See Imported Objects Option Under SWCV.
How Can I Import Idoc in PI 7.0
if any screen shots are available
please share it
It helps me So much.
Thanks and Regards,
Ravi

Hi,
refer the below link.
http://****************/Tutorials/XI/FileToIDoc/Index.htm
Importing IDocs and RFCs
http://help.sap.com/saphelp_nwpi71/helpdata/EN/2b/a48f3c685bc358e10000000a11405a/content.htm
Regards
Srinivas

User decision option not seen to approver

We have a user decision in our workflow template. We have decision option Select approver ,Sent back to AP ,Cancel . When some users execute the this task they were shown as decision decision and cancel. decision option text is not shown to them. This is happenng for few users only. not for all users. Please suggest what can be done to solve this issue

Yaa Martin is right please check the Translations has been maintained for the Logon language in which the user is logging in. You can check the table entries of SWDSTEXT.
Thanks
Arghadip

Webservice not seen under naigator after transport

Hello Experts
I created a webservice using an EJB.
For this I created 2 DCs 1 is EJB Module and other is a Web module in a single NWDI track.
The Ear file was deployed successfully and the webservice executes perfectly in development system
However when I moved my changes to the test system (transport using Solman ) I cannot locate the web service in the navigator.
I checked the NWA for deployed DCs in both the systems.
For the EJB DC when I check the application modules I saw 3 components EJB module, Web Module and the webservice (WEBSERVICE PORTS) in dev system where everything works fine.
However in the test system under NWA for the DC I see only 2 components EJB module and the Web Module under application module. The component of type web service is missing.
Am I missing something in the transports .
What do I need to do to ensure that the web service appears in the WS navigator .
Experts Please help.
Regards
Vikas

Hi,
can you please tell me the version of your engine?
I remember a known issue from the past. The phenomenon was that the webservices were not appearing in the /wsnavigator, and the problem could be resolved using a fix:
#1395019 u2013 Reverse proxy support of Java Web service framework
(http://service.sap.com/sap/support/notes/1395019)
Best Regards,
Ervin

Office extend option not seen under flexconnect

Similar Messages

Maybe you are looking for