Office HP P1505n printer connected to network not being found

Hi,
I'm trying to fix a problem we have had since experiencing a power cut last week. Our main support guy is on holiday and i am pretty new to our network.
After we lost power i had to manually start all of our servers and services and i thought everything was working until a user tried to use one of our printers.
The error message for one of the printers was 'Error - Offline' and the other says 'Unable to connect'. Both messages being displayed from the print options in microsoft word. The 2 printers are a HP LaserJet p1505n and a HP Colour LaserJet CM 2320.
We have a small network with a domain controller and DHCP on one server and our printer installations on another (running Windows Server 2008 R2 64-bit. The printers are connected to the network via ethernet cable. I remember someone mentioning restarting a network switch which is next the printers which i have done.
I printed a config page from one of the printers and made sure that the displayed IP address was correct in DHCP. It was correct for the address lease and reservation for the printer. When i try and ping the printer from a computer i get 'Destination host is unreachable'.
It must be something to do with settings not being right after the power cut but i'm not sure where next to look.
Any advise would be very welcomed.
Thanks!

Hello jamesrussellcj, and welcome to the HP Forums.
I am sorry, but to get your issue more exposure I would suggest posting it in the commercial forums since this is a commercial product. You can do this at HP Commercial LaserJet Forums.
I hope this helps!
Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
Jamieson
I work on behalf of HP
"Remember, I'm pulling for you, we're all in this together!" - Red Green.

Similar Messages

  • NOKIA N8 - Unable to connect - WLAN Network not fo...

    also for NOKIA N8 THE SAME PROBLEM: Unable to connect - WLAN Network not found;I see my network in the wlan list (Tthe state is "knowed") but when i try to connect to it,i read: Unable to connect-wlan network not found;i tryed with: mac filter on/off,dhcp on/of,wep protection on/off,firewall router on/off,power saving in the phone on/off, but the problem is the same ever!..Niklas Savander,..where you are?..nokia is back?..but with the same problems!

    Well, I seem to have issues with WLAN as well.
    When I am approx. 10metres away from my Router, the N8 doesn't connect. However, I can connect to WLAN using my Nokia N900, Nokia E52 and my Netbook (Asus EEE1005HA). This is a N-router with standard settings. I have tried changing, the channels etc. but it doesn't resolve the problem.
    So is this a problem with the Nokia N8? I mean, all my other wireless devices work fine. I even tried changing the Wireless Interface type from N/B/G, to B/G but as I said before, the problem is still there.
    Hopefully this problem can be sorted with a software update, that is if the N8 finds it difficult to connect to Wireless Internet.
    P.S.: Tthere is another thread reporting similar problems. Here is the link.

  • Error Deploying Business Rules (connection information could not be found)

    Hello experts,
    When I try to deploy the Business Rules I'm getting the following error:
    "Deployment was not successful.
    Rule was validated with no errors.
    The rule could not be validated against the deployed application as connection information could not be found"
    When I create a new Business Rule I can't associate the Business Rule to the form and I think it's because the deploy wasn't successful.
    I would apreciate your help about this issue.
    Regards,
    Rodrigo

    Hello,
    We already tried to make some changes in order of dimensions but the problem persists.
    We didn't change the order of dimensions, so I think itsn't due to that.
    In the Production environment with the same application we don't have any error ... so ideas about this issue are lacking!
    Regards,
    Rodrigo

  • Images and .properties(bunldes) files are not being found from my JSPs

    Hi,
    I have created .ear file by using ANT Application. And deployed into Oracle9iAS(OC4J). Here problem is that images and .properties(internationalization bundles)files are not found from JSPs.
    Here is my directory structure.
    public_html--->locale -->BusinessEntity -->businessentity_en_US.properties
    --->enterprise -->images -->knowldege.jpg
    --->BusinessEntity-->BEAdd.jsp
    in my jsp bundle(.properties)file is accessed like this:-
    <i18n:bundle baseName="/locale/-->BusinessEntity/businessentity" id="businessentity" locale="<%= locale %>" />
    in my jsp images accessed like this:-
    src="/enterprise/images/knowldege.jpg".
    In my working environment, without creating .ear file, images and .properties files are being found my JSPs. But if i create .ear file and after deploy, images and .properties files are not being found my JSPs.
    please let me know where i might did wrong
    thanks in advance
    srinivas

    Hi i am again. Here is my configuration files(server.xml and default-web-site.xml)
    server.xml :-
    <?xml version="1.0"?>
    <!DOCTYPE application-server PUBLIC "-//Evermind//DTD Orion Application-server//EN" "http://xmlns.oracle.com/ias/dtds/application-server.dtd">
    <application-server application-directory="../applications"
    deployment-directory="../application-deployments"
    >
         <library path="../tools.jar" />
         <rmi-config path="./rmi.xml" />
         <jms-config path="./jms.xml" />
         <log>
              <file path="../log/server.log" />
         </log>
         <transaction-config timeout="30000" />
         <global-application name="default" path="application.xml" />
         <application name="nalluri" path="../applications/trainiumear.ear" auto-start="true" />
         <global-web-app-config path="global-web-application.xml" />
         <web-site path="./default-web-site.xml" />
         <cluster id="-1640090707" />
    </application-server>
    default-web-site.xml:-
    <?xml version="1.0"?>
    <!DOCTYPE web-site PUBLIC "Orion Web-site" "http://xmlns.oracle.com/ias/dtds/web-site.dtd">
    <web-site port="8888" display-name="Default Oracle9iAS Containers for J2EE Web Site">
         <default-web-app application="nalluri" name="Commonwar" />
         <access-log path="../log/default-web-access.log" />
    </web-site>
    thanks in advance
    wating for reply
    srinivas

  • Sim Card not being found on Passport

    I have a new Passport which I like.
    It is locked to Vodafone and I have a Vodafone Sim
    First 10 days it was fine then the sim card was not being "found"
    I tried two new sims and no luck.
    It seems the device may be faulty.
    I bought it from a private user on Ebay for which it was an unwanted upgrade.
    How do I get it repared?

    Ok. Since it was purchased from an non-official retailer on eBay, I don't know...
    you might try the BlackBerry per incident support channel.
    1. If any post helps you please click the below the post(s) that helped you.
    2. Please resolve your thread by marking the post "Solution?" which solved it for you!
    3. Install free BlackBerry Protect today for backups of contacts and data.
    4. Guide to Unlocking your BlackBerry & Unlock Codes
    Join our BBM Channels (Beta)
    BlackBerry Support Forums Channel
    PIN: C0001B7B4   Display/Scan Bar Code
    Knowledge Base Updates
    PIN: C0005A9AA   Display/Scan Bar Code

  • WD Mybook not being found

    Hi,
    Anybody have any ideas why the WD mybook using firewire or usb is not being found by the iMac?? It had been working fine until a week ago and it will work in a windows enviroment. Any ideas woud be great Thanks.
    Imac 20"   Mac OS X (10.4.8)  

    The format maybe in NTFS (windows), as far as I know macs cant read that, see if Mac OS X can find it by going Macintosh HD > Utilities > Disk Utility or (Spotlight > Disk Utility) and see if you can see it there with your iMac hard disk, if it is unplug it and backup everything on your PC and wipe the external drive, then plug back in your iMac and then go to Macintosh HD > Utilities > Disk Utility or (Spotlight > Disk Utility) and format the external HD in FAT or FAT32 when done unplug and take back to windows pc and copy data back to drive. Try that and post your results

  • Wifi keeps dropping or not being found

    Just switched to VZ and got smartphones, Apple i4s. 
    I have been at home, work and my friends house with my new phone, connected to networks and then disconnected..
    When I go to the Wifi setting, and search for networks, sometimes nothing shows up (the circle thing moves, then nothing is there, no networks)  Then I will try it again  over and over and it may or may not find the network.  (FYI)  I do have an itouch which always works fine and finds all the networks and connects automatically (home, work or friends). 
    If it does find the network, it will connect.  Then the network will disappear and I will be on 3G.  I go into setting to search  networks and nothing is there and sometimes it will show the network. 
    A friend said it is an ongoing with Verizon and mentioned something about  a booster.  I don't want to go buy something to 'boost' it.  My other friend has ATT and she doesn't have these issues.
    Because I have not had it for even a week, I would like to know what I can do aside from switch service providers. 
    I called customer service from my friends house while I was there (she lives a distance from me), to find out if it was something wrong that I have done, because her network did not show up.  It appeared and then as fast as it appeared, it disappeared, so I don't think it is because of where I live.  It does the same thing at home and at work.
    I have used my itouch at all places many times before, with no problems.
    I hope VZ is reading this and can give me some helpful information. 
    Sincerely,
    Lisa

        Odd2see, well this issue is certainly odd to see, but I want to make sure we get your iPhone all up and running. I've used several iPhones and haven't experienced this issue. Also, WiFi isn't related to the network, so you would not need a cell booster/network extender for this issue. If you haven't already, try deleting your paired connections and re-add. Another thing to try is to Reset your Network Settings by going to Settings, General, Reset, Reset Network Settings. If you're still having an issue after this, I suggest restoring the device as new via iTunes on your computer http://bit.ly/SzGLK.
    Let me know if you continue to experience issues with WiFi.
    MarquiaF_VZW
    Follow us on Twitter @VZWSupport

  • Can not restore due to folder not being found

    I just want to wash my ipod harddrive and just start over due to a couple of problems I have had.
    Whenever I connect to itunes, it does not recognize that it is a nano, but does say it is an ipod, and that it is corrupted, so I should restore.
    I click restore and the error that comes up is
    " can not restore because the correct folder can not be found "
    any ideas what that is about.
    already done all the troubleshooting steps to no avail.
    not a newb on the computer so its frustrating me.

    You might want to try deleting the "iPod Photo Cache" folder on your computer.
    See the instructions here:
    Photo Sync creates iPod photo cache
    After that, restart your computer, and try restoring your iPod again.
    Any difference after trying that?
    -Kylene

  • HT1386 ipod touch not being found by itunes

    just downloaded the larest version of i Tunes and now my iPod touch wont sync and id not being recognised by iTunes!!!!"!!!!!!

    iOS: Device not recognized in iTunes for Mac OS X
    Or
    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - Then do the other actions of:
    iOS: Device not recognized in iTunes for Windows
    paying special attention to item #5
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Classes in web-inf/lib not being found.

    I'm having problems with a servlet app in which jar files placed in the web-inf/lib of the application are not found at runtime.
    If I put them in J2ee\home\lib they are found OK.
    This application has previously deployed and worked correctly, then I added another servlet and redeployed, and classes that were previously found OK stopped being found.
    On checking the server all the directories look correct.
    What could be causing this and how can I make my web applications deploy reliably?
    OC4J version is 9.0.3.0.0.
    Thanks

    Guys,
    Have you tried with the production version of OC4J 9.0.2 ? It should work. Please download the production version of OC4J 9.0.2 and give a try.
    regards
    Debu Panda
    Oracle

  • Has anyone else experienced problems with the disc burner/driver software not being found?

    I am trying to burn music onto a disc and it is telling me that the disc burner/driver software has not been found. Has anyone else experienced this with their MacBook Pro?

    SuperDrives wear out - it seems that yours might be on the verge of a mechanical failure. I'd just replace it, buying a new drive from Other World Computing and installing it yourself (because Apple would charge a small fortune).
    Clinton

  • HP LASERJET 4000 PARALLEL PRINTER - CONNECT TO NETWORK

    I have a HP LaserJet 4000 printer with parallel interface currently connected to a desktop computer (WIN 7) via hardwire connection.  I have a wireless home network with another desktop and several laptops that I would like to be able to print to this printer, preferably via a wireless interface.  Does anyone know if this is possible and if so what it would take in additional hardware.  Even though this printer is no longer sold, in terms of usage it is still new, on the first toner cartridge!
    thanks

    Can you elaborate as I'm not that tech savvy but have a similar issue.  I have an HP Laserjet 2100M that I love as a "workhorse" printer.  I previously had this printer and an Epson Stylus Photo R800 "networked" so I could print to either from my MAC.  I recently moved from CT to FL and would like to replicate the network.  In retrospect, I think my network was facilitated by the HP printer being connected directly to an old PC which must have been like the printer server you described.  The old PC did not move to FL so I now have a MAC, a cable modem, an Airport router and a new PC laptop that I would like to connect.  Plus, I'm looking to buy an all-in-one to have the functionality that I had before the move (a separate fax machine and an HP printer-scanner-copier that also didn't make the move.  (As an aside, I was looking at the HP 8600 to buy and was concerned as it doesn't say it supports Windows 8 so I have to find something else.)  
    Sorry for beng so longwinded but I'm at a loss for which direction to go and recognize I'm in over my head but beleive what I want to do can be done (I just don't kow how)

  • AEBS Airport Extreme Printer connected by USB not recognized

    My in-laws literally just bought a brand new AEBS yesterday. Plugged it in, the the Canon MX7600 multifunction printer into the AEBS usb port. My in-laws old Windows PC is connected to the internet via an ethernet connection to the AEBS.
    1. PC can see printer and prints fine, no problem
    2. AEBS cannot see printer using Aiport Utility v5.4.2 and the AEBS firmware version 7.5 when using in-laws brand new MacBook Pro which is connected wirelessly to AEBS.
    Can anyone out there help?

    Have you tried the steps in "Printer troubleshooting for AirPort Base Stations and Time Capsule".
    And you are aware that you will only be able to print... right? The USB port on the AEBS does not support FAXing nor scanning.

  • Windows 7 laptop connects to network - not internet

    1 week ago there was a power outage in my neighborhood that lasted about 6 hours.  Afterwards, I was not able to connect to the internet and the battery backup alarm was beeping.  The battery was replaced (the beeping stopped) but I could no longer get online.  Verizon determined that there was a problem with the router (internet light was yellow) so they sent out a new actiontec (red ring).  After connecting it and running the in-home agent, my PC (which is wired into router) works.  My laptop, however, connects to the network but can still not get internet access (it says "unidentified network").  Verizon claims this is an issue with the laptop.  My wife brought her work laptop home - same problem.  My brother-in-law brought his laptop over-  again the same message there.
    This, to me, is not an issue with the laptops, but rather with the router - and creates a problem as my wife works from home next week and must use her work laptop - which at this point will not work.
    Any suggestions?

    Presumably you have switched over to the new SSID.  Also these new routers use WPA2 security by default.  The passphrase is case sensitive for WPA2.  On your previous router it was probably WEP security and a Passkey (in hex) that was not case sensitive.
    IF it is really connecting to the network but unidentified network, click on windows 7 network and identify your network as a trusted home network.

  • My devices are not being found, but all are connected to my WiFi...how can I fix this?

    Is there a way to fix my iCloud "Find my Device" feature?  All of my devices are conected to my home WiFi and yet, the Find My Device feature says that all of my devices are not connected.  How do I fix this?

    Hello micoj8
    There are a few things you can do and I have highlighted them below. If you want more information, then check out the article below.
    iCloud: Troubleshooting Find My iPhone, iPad, iPod touch, or Mac
    http://support.apple.com/kb/ts4006
    "No location available," "Offline," or "Location Services Off" alerts
    This can occur if:
    The date on your device is incorrect. Choose Settings > General > Date & Time to check and set the date.
    Your iOS device is currently off or not connected to a data network (Edge, 3 or 4G, or Wi-Fi). Wait a few minutes and try again.
    Your iPad (Wi-Fi only), iPod Touch, or Mac is currently off or not connected to a Wi-Fi network.
    Location Services is not enabled on your iPhone, iPad, or iPod Touch (Settings > Privacy) or on your Mac (Date & Time) preferences. Learn more about Location Services on your Mac:
    OS X Mountain Lion or later
    OS X Lion
    You are located in a country where Apple does not offer this feature. This feature may not be available in all countries due to technical limitations or local law.
    Regards,
    -Norm G.

Maybe you are looking for