Office Jet 4500 G510

Am having continual problems with this printer. Cartridge has been replaced. Now using reman. Have cleaned cartridge and aligned heads. Have error message reading 'print cartridge problem,[Black] refer to device documentation to troubleshoot.  Test print papers show the ink is fine as it prints deep on the black type. Ink level when read shows fine. New cartridge has only printed out about 10 sheets. I can open door and remove cartridge, then reinsert it and it will print perfectly for one page then beeps and shuts down. Refuses to print anything again until I repeat this process. Anybody got any ideas of what to do?

Remove the ink cartridges, look at the electrical connections on them (lots of gold dots) and clean them if needed.  Look at the mating surface in the printer and do the same.
If that does not work, reset the printer - turn it off, unplug power from the back of the unit for a minute, plug back in and turn on.
Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
I am employed by HP

Similar Messages

  • I have a HP office Jet 4500 wireless All- In One, how do I delete the customer participat​ion program

    Hi
    The customer Participation Program is taking up so much space that I want to remove it from my laptop.
    I have a HP Office Jet 4500 wireless All In One. When I attempt to remove it I get a message that says if I remove the program
    my device will no longer work.. How can I safely remove it without damaging my equiptment from working?

    couple of questions about this:
    Are you scanning from the printer, or with software on the computer? If from the computer, are you initiating the scan from Windows, HP software, or Word? 
    If you put a legal size document in the feeder, and press scan, unless the defaults have been changed to letter size, it should scan the entire legal size sheet. You should be able to go into the settings and change that if the default has been set to letter.
    007OHMSS
    I was a support engineer for HP.
    If the advice resolved the situation, please mark it as a solution. Thank you.

  • I have an hp office jet 4500 and os maverick 10.9.4 and I can't get it to print after last upgrade, multiple malfunctions and error, help?

    I have an hp office jet 4500 and os maverick 10.9.4 and I can’t get it to print after last upgrade, multiple malfunctions and error, help? I have tried deleting and resetting printer and re-installing update 6 times. Last update attempt showed none available??? I can’t load the software directly from HP because their only option is to use the software update option on the mac....frustrated!!! Help!!
    I get blank pages that just run through the printer and a stats window that just 33% complete and goes no further.

    I am going on the guess that an old driver is still installed...
    Use Finder Go > go to folder, and go to /Library/Printers and delete the HP folder(s).
    Reset the Printing System:
    OS X Mavericks: Reset the printing system
    Now, Add the printer in Print & Scan prefs.

  • Office Jet 4500 G510n Printer Ready but error comes up in status

    I have a Office Jet 4500 G510n and a MacBook Pro 15 late 2006 Model 2, Ver 10.6.8
    I upgraded the HD to a SSD and everything works find except the printer. I can go to Utility and the TEST PAGE prints OK.
    However, on STATUS it reads: "error/library/Printers/hp/cups/inkjet1.driver/contents/macos/injet/failed
    I have checked on drivers and all I saw were for the "extra Page" ...
    Lost!!!!
    This question was solved.
    View Solution.

    From research on this HP Support site, I found that in Mac OSX they auto download updates for printing. Did not think about transfering my old HD to a SSD that those updates would follow... they did not. So... I downloaded all the updates (driver)to my new SSD and the HP Printer works!

  • I have a Mac OS X 10.4.11 and a HP Office Jet 4500 Desktop. What driver can I use?

    I have a Mini Mac desktop computer, MAC OS X 10.4.11 and a HP Office Jet 4500 Desktop printer.  What driver can I use to install this printer?

    Hey @Greenise,
    Welcome to the HP Support Forums!
    I would like to assist you today in getting the proper Full Feature Software and Driver package to install your HP Officejet 4500 Desktop All-in-One printer on your Mac OS X 10.4.11 Operating System.
    Below is the link for the Full Feature Software and Driver Installer. Simply click on the link and select the 'Download' button in the top left hand corner. Once the download is complete just run through the on screen instructions to install your printer.
    HP Officejet Full Feature Software and Driver (Universal) - Mac OS X 10.4,10.5 and 10.6.
    Please let me know if this installer works for you and if you have any other questions. Good luck!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Cannot connect my office jet 4500 to my computer

    How do I obtain the driver to scan from my office jet 4500 to my computer?

    Officejet 4500 scan driver is available in below link. Based on your operating system, download and install 'Driver - Product Installation Software'.
    http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?os=4132&lc=en&cc=us&dlc=en&sw_lang=&product=3919...

  • Office Jet 4500 Sleep Mode

    We  installed a Office Jet 4500 Wireless printer 4-6 weeks ago.  Everything is good accept it occassionally goes into 'sleep mode' when it has not been used for a couple of days.  After trying several combinations of buttons, we cannot figure out how to get it back into normal operating mode without unplugging it.  The manual is silent on this issue.  Anybody have the magic code for waking up this machine after it has gone into sleep mode?  Thanks in advance for your help.

    Same problem here.   I followed the instructions to supposedly turn off the sleep mode, but all that did was reset the entire machine--including the 85 speed dials I had entered.   HP tech support is clueless about this problem.

  • COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

    IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
    This question was solved.
    View Solution.

    No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
    Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
    http://goo.gl/RsNpf
    HP ePrint Mobile Apps FAQs:
    http://goo.gl/33WFq
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Can print but not scan in Windows 8.1 to HP Office Jet 4500 510n-z

    New computer over the weekend with Windows 8 installed.  Upgraded to 8.1online   My HP Office Jet all-in-one 4500 prints fine, but I have no way to scan.   I tried using the HP website to download and install the full driver.  When it gets to the installation page, it just hangs on the page trying to communicate with my printer.   Cannot get past that page.   
    I also tried the HP Print and Scan Doctor utility.   It recognizes my HP all-in-one, but when it goes to the first step of communicating with the selected product, it gets about 3/4 done and then just hangs.
    I have tried disabling my firewall.  Still no luck.   
    I tried going to Device Manager and having it searched for updated drivers.  It says the current driver is up-to-date.
    I tried Windows Fax and Scan.  When I choose New Scan, it says I have no scanner installed.
    Somewhere there is a big error in this mess that is not allowing my printer and Windows to allow this driver to be fixed.  HELP!   
    This question was solved.
    View Solution.

    Hello 8latinfans,
    I understand that when you are installing the full featured software, that it hangs on communicating with the product. I have included the following document, 'The Progress Bar on the Software Installation Stops or Stalls'. This will walk you through different steps to try and get the software installed.
    If the above document fails to resolve the issue, please let me know if there are any specific error messages that you do get.
    Thank you.
    I worked on behalf of HP

  • How do I print from my I-pad2 to my office jet 4500 g510n

    How do I print from my I-pad2 to my price jet 4500 g510n.

    Hi,
    Firstly please check to see is your printer in this list ? 
    http://support.apple.com/kb/ht4356
    If Yes, please follow this checklist and fix:
    iPad: http://www.apple.com/support/ipad/assistant/airprint/
    If No, probably you have to print indirect way.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Office jet 4500 wireless cannot print from Internet Explorer 9

    Since I installed IE9 I can no longer print webpages and I get an errormessage when I try to, whereas printing in MS Office works just fine.
    My OJ 4500 Wireless is installed on a Windows 7 (64 bit) machine.
    I tried solving the problem by downloading and installing the latest full version driver, but the problem persists.
    Who can help me?

    Hi ATOL,
    It sounds like you might be selecting properties instead of  "printer properties".
     Double check and make sure that  you're selecting "printer properties" from the list.

  • HP Office Jet 4500 G510n-z fails to print on wireless network

    Hi,
    A while back my XP machine (Dell D620) stopped printing wirelessly with my officejet 4500 G510n-z. My Windows 7 D630 prints wirlessly with no problems. I have download the current HP drivers to no avail. I have looked at other posts but no workable solutions. The 4500 G510n-z appears as a printer but all print jobs end in an error. I cannot print a test page, notepad etc. All the jobs appear on the queue but they all error out. It seems to be an XP specific problem. I have XP pro version 2002 sevice pack 3. My network is just a Verizon Fios wireless router. In windows 7 I can see the actual address of the Hp wireless connection when the printer is added. In Xp I don't see the wireless address when I try to add the printer. Now it appears in the printer list on XP but 7 appears to see the actual wireless address and allows me to select it to add the printer. I have connected the XP machine to the printer and it would work for a while then stops working. Not sure what triggers the loss of connection. How can I specify the 4500 G510n-z connection for XP? I tried adding the IP address I see on my 7 machine but XP wants a server path that is //server etc  UNC path.
    I went into the printer properties and changed the address to match the 7 ip address 192.168.1.3 XP 192.168.1.9 Windows 7 but no go still. 
    Thanks
    Al
    This question was solved.
    View Solution.

    Thanks for all the help!.  After the reinstall the printer IP which now ends in .3 is the same for my XP and 7 machines. I tested  my  machines to be sure. Both are printing fine thanks to your help!

  • How do I get my office jet 4500 printer back online to print

    Please help with my Question to get 4500 printer back online

    What operating system does the computer use?  This will be good to know if any steps need to be performed from the computer.
    Offline and Online in Windows can refer to network and USB connected printers.  Is the printer connected over a network or by a USB cable?
    If over a network, what brand and model is the router?  Also, is it wireless or wired (Ethernet)?
    ↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓

  • Runtime error for a office jet 4500 G510g

    I have down loaded the divers for the Hp Officejet 4500 G510g, I get a runtime error Program:\users\nlmcka57\appdata\local\tep\71F\setup.exe. I have looked and down loaded some of the other links to see if it would fix it, to no aval it still won't work, stil get the same error. Any help would be helpful, Thank you.

    Hello @nLmcKa60 , and welcome to the HP Forums, I hope you enjoy your experience!
    I can see you're having runtime errors.  I would love to try and help you, but I do need a little information first.
    I am linking a few HP Support documents below that will show you how to find which operating system you are using. Also, if you're using Windows, please include whether your operating system is 32-bit or 64-bit.
    Mac OS X: How Do I Find Which Mac OS X Version Is on My Computer?
    Which Windows operating system am I running?
    Is the Windows Version on My Computer 32-bit or 64-bit?
    Please let me know what you find.  Thanks again for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • How do I print from my ipad2 to my HP office jet 4500

    My ipad2 won't even connect to my HP Officejet 4500 wireless printer.  I try to print emails and I try to choose a printer but it says no printers found!  Please help!

    The easiest way is to use an airprint enabled printer.  The list has grown, but i do not see the hp  4500 on it.
    http://support.apple.com/kb/ht4356
    Check the app store for alternste solutions.

Maybe you are looking for

  • Ipod Updater Need Help

    I have a dmg file from the download and it will not install. What program should i use to install this?

  • Issues Loading 'Rented Movies' on to iPhone 3G

    When trying to load 2 recently downloaded movies, getting error message that basically says it is 'INVALID' (and that's it). I have been able to load 'rented' movies before with no issues. Any help that can provided will be greatly appreciated. Thank

  • Ifconfig: en0 needs to be set to "autoselect" at every boot

    I wanted to connect to two networks simultaneously using en0 and en1. I took en0 down using ifconfig and brought it back up. Now I have to set "media" to "autoselect" on en0 everytime I boot into OS X or else en0 doesn't work. Any suggestions on how

  • Jpa (toplink) + oc4j: oracle.oc4j.rmi.OracleRemoteException

    Hi Brains, :P I'm trying create a query with javax.persistence.Query im my Stateless in the OC4J. Query query = em.createQuery("my string query"); This line throw the exception oracle.oc4j.rmi.OracleRemoteException: 2009-03-06 13:02:38.484 ERROR J2EE

  • What is DME

    < MODERATOR:  Message locked.  Please read the [Rules of Engagement|https://www.sdn.sap.com/irj/sdn/wiki?path=/display/home/rulesofEngagement] before posting next time. > Hi,          kindly can anyone tell me what is DME and how it can be configured