Office jet 5780 is printing mirror image

I have a oj 5780 that is printing mirror image and really small. I have change all the settings and it is still doing this. Has anyone else had this problem and do you know what it might be? Thanks

Hello,
Please click HERE to access the steps that should resolve the issue .

Similar Messages

  • Dissatisfi​ed with HP Office jet 6700 Premium Printer

    I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer.  I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads.  I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment.  Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

    Please read this post then provide some details.   What operating system?  What are the error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • How do I get an Office Jet 6500A to print on Card stock?

    How do I get an Office Jet 6500A to print on card stock. It pushes the card stock through the printer but will not print and tells me I have not selected the right print media. There is no selection for card stock.  I have tried every selection.  I assume there are other media definitions that can be downloaded but they certainly are not apparent.  I have been doing this job on all my other HP printers for years.  Suddenly this printer balks.

    Hi,
    Page #22 of the manual says (must be the same as photo paper ?):
    To load cards and photo paper
    1. Lift the output tray.
    2. Slide the paper width guide out as far as possible.
    3. Insert the media print-side down along the right of the main tray. Make sure the media aligns with the right and back edges of the tray and does not exceed the line marking in the tray. If the photo paper has a tab along one edge, make sure the tab is pointing towards the front of the printer.
    4. Slide the media guides in the tray to adjust them for the media size that you have loaded.
    5. Lower the output tray.
    6. Pull out the tray extender.
    And the manual is : h10032.www1.hp.com/ctg/Manual/c02519721.pdf
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • All my pdf are printing mirror image since i started the subscription for adobe

    all my pdf are printing mirror image since i started the subscription for adobe

    Hi pintu777,
    I see that you just got an ExportPDF subscription. That shouldn't have any affect on the way that your PDF files are printing. Has anything else changed on your system? What are you printing to and from (Reader or Acrobat)? Do other types of files print mirrored as well?
    I look forward to  hearing back from you with a few more details. We'll get this sorted out.
    Best,
    Sara

  • Reverse printing / mirror image printing

    How do I reverse print/mirror image print?  i have HP photosmart premium c310. 

    you need to use a 3rd party software that supports reverse printing.
    Although I am working on behalf of HP, I am speaking for myself and not for HP.
    Love Kudos! If you feel my post has helped you please click the White Kudos! Star just below my name : )
    If you feel my answer has fixed your problem please click 'Mark As Solution' and make it easier for others to find help quickly : )
    Happy Troubleshooting : )

  • Trying to print mirror image from word 2010 to the HP photosmart c310. How??

    Can not find an option to print mirror image. Please Help...

     I have tried creating the profile again and still get the same problem.  The problem is machine based and not user based. 
    Hi GG1234,
    If you recreated the Outlook profile and still got the same problem, please try to recreate the Windows Profile:
    Log on to client using local admin account->rename the profile folder under c:\users.
    By the way, did you try to print the mails in OWA?
    Frank Wang
    TechNet Subscriber Support
    in forum
    If you have any feedback on our support, please contact
    [email protected]
    Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • How can i get my hp office jet j4550 to print from word 7?

    How can I get my HP Office Jet j4550 to print from the Microsoft Word 7? I downloaded the drivers for the printer and reinstalled Microsoft Word 7. 

    Do you mean Windows 7?
    ======================================================================================
    * I am an HP employee. *
    ** Make it easier for other people to find solutions, by marking my answer with "Accept as Solution" if it solves your issue. **
    ***Click on White “Kudos” STAR to say thanks!***

  • How to rollback driver for Office Jet 6500 APlus Printer

    I recently updated the driver for my Office Jet 6500 APlus printer and do not find it to be useful or efficient for my purposes. The printer is connected wirelessly  to a Dell Inspiron 1720 laptop PC running Windows 7 Home Premium. Can anyone tell me how to roll back the printer's driver to the one previously installed which is the one that came with the printer when it was purchased about 4 or 5 years ago.

    Hello oldhand,
    Welcome to the HP Forums.
    I see that you are having some printing issues since you have updated the driver.
    I have a few steps that I think will help us.
    First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
    I am also going to give you detailed instructions for Uninstalling the Printer Software.
    Once the printers software and drivers have been removed, please click on the following link for the HP Officejet Full Feature Software and Driver.
    Please fee free to write me back if you have any other questions.
    Cheers,   
    Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    W a t e r b o y 71
    I work on behalf of HP

  • Printing Mirror Image

    I had to uninstall my printer and reinstalled it.  It has a different properties screen now and will not let me print mirror image anymore.

    Hello @angelaw72,
    Welcome to the HP Support Forums!
    I understand that since reinstalling your  HP Photosmart 6525 e-All-in-One Printer on your Windows Vista computer that your printing preference options have changed and you no longer have a 'mirror image' option. I would like to assist you today with resolving this issue.
    Now I did some research into the HP Photosmart driver and found that the 'mirror image' option you use actually isn't built into this driver package. In saying that, this is still an option you can get. You may have previously had the mirror image option if you had a generic print driver installed for your HP Photosmart. To regain the 'mirror image' capabilities, please follow the steps below.
    How To Add An Alternate Driver:
    Click on your Start menu
    Select Devices and Printers (or just Printers)
    In the Devices and Printers folder right click on your HP Photosmart 6525 and left click on Printer Properties
    Left click on the Advanced tab
    Left click on New Driver
    When the New Driver window opens just hit 'next' until you see a list of Manufacturers on the left and a list of Printers on the right.
    Select HP as the Manufacturer on the left
    Select Deskjet 9800 as the printer on the right. If Deskjet 9800 doesn't appear than select 'Windows Update' on the bottom left and once the update completes you will be able to select Deskjet 9800.
    After selecting Deskjet 9800 hit next to complete the New Driver Wizard
    Under the Printer Properties window select 'Apply' but don't hit OK
    Select the General tab
    Rename your printer back to HP Photosmart 6525
    Hit OK
    Lastly, right click on your HP Photosmart 6525 one more time and left click on Printing Preferences
    Left click on the Paper/Quality tab
    Left click on the 'Normal' dropdown for Print Quality on the bottom right and change this to Fast Normal
    Click on the Finishing tab at the top and check the box for Mirror Image on the bottom right hand side
    Hit Apply and OK
    Now please try to print to ensure that the updated driver is functioning properly for you.
    Please respond to this post with the result of your troubleshooting. I look forward to hearing from you!
    X-23
    I work on behalf of HP
    Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
    Click the "Kudos, Thumbs Up" on the right to say "Thanks" for helping!

  • Officejet 7500A...how do I print mirror image?

    how do I print mirror image on officejet 7500A?

    HI,
    Not sure if its in the driver, most brands a removing these options from the driver (or not including them anymore) because of the fact that most picture software programs have these options built in themselves. For example in the standard windows program paint, the option Flip horizontaly will allow you to print a mirror image..
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Although I work for HP my posts and replies are my own
    Please mark the post that solves your problem as "Accepted Solution"

  • How can you print mirror image from word 2010 on the HP Photosmart c310 printer

    Trying to print mirror image from Microsoft 2010 on a windows 7 computer to the HP Photosmart C310 printer. Can not find an option. Please advise.

    Judith
    Perhaps you can enlighten us as to what "does not print correctly" actually means.
    Miss-spells your name? or what?
    How have you set up your Page set-up?
    It has to agree with how you are feeding the envelope in and what printer driver you are using.
    Peter

  • COMPATIBILTY OF MY WIRELESS OFFICE JET 4500 G510N PRINTER WITH THE IOS AIRPRINT SOFTWARE

    IS MY WIRELES OFFICE JET 4500 G510N PRINTER COMPATIBLE WITH THE IOS AIRPRINT SOFTWARE IN THE IPAD2
    This question was solved.
    View Solution.

    No. You can use it with the ePrint mobile app for iOS devices. You can find out more by following the links below. Hope this helps.
    Supported Printers for the HP ePrint Mobile App or HP ePrint Home & Biz:
    http://goo.gl/RsNpf
    HP ePrint Mobile Apps FAQs:
    http://goo.gl/33WFq
    -------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

  • Hp office jet 6500 how to print mirror images

    How do I create a mirror image for text  to print on a tshirt transfer paper?  I can do it with my old printer but I can't find the area were I would click Mirror Image for this printer. 

    Hi @adamjoshme ,
    I understand that you want to know how to print a mirror image. I would like to help you out with this issue today.
    This feature might not be available with this model. You would have to check the printer preferences, in the Advanced section for Mirror Image and turn it on from there if it is available. I checked the manual and it didn't show this feature.
    If you don't have that option in the driver then use Paint, Under Rotate select Rotate 180 degree's and then under Rotate select flip horizontally.
    Hope this helps.
    Have a great day!
    Thank You.
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    Gemini02
    I work on behalf of HP

  • Mac to Office Jet Pro 8600 printer

    I have a IMAC desk top connected to an Office Jet Pro 8600 running MAC OS 10.6.8.  I cannot get the scanner to scan photo's to a specific size.   I use the HP Utility but no matter what I try to do the scanned image only cooies from the front right corner of the scanner glass.  How do I change the JPEG scanner size and how do I scan whatever size image I place on the glass?
    This question was solved.
    View Solution.

    Hi @paul8588,
    Welcome to the HP Forums!
    I noticed that you are trying to scan photos to a specific size with your HP Officejet 8600, and I am happy to help!
    I would recommend the following:
    Reset the printing system. Mac OS X: How to reset the printing system.
    Verify and repair disk permissions. Disk Utility 12.x: Repair disk permissions. 
    What size of paper are you trying to scan on the glass?
    If the above recommendations do not solve your issue, please see this guide. How to Scan: Mac OS X v10.6, and you will see some alternate scanning options without HP software.
    Hope this helps!
    RnRMusicMan
    I work on behalf of HP
    Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to say “Thanks” for helping!

  • Printing Mirror Image on HP Officejet 6600 All In One

    Trying to print an Avery (Microsoft)  T-Shirt Template. I am running 64bit  Windows 8.1. I have tried everything to access Mirror Image on my  Printer but I cannot find Mirror Image anywhere. After I click on PROPERTIES I am only shown"Lay Out' & "Paper Quality".  When I click on "ADVANCE SETTINGS" in "LAYOUT" there is  "PRINTER FEATURES"  This only shows "Print in Grayscale";  "Resolution"; Output Quality": HP Realife Technologies"; Borderless Printing" &  " Print all Text as Black.. I have been trying for the last 7 hours to try and figure this out. Hopefully someone can come up with a solution. My warranty  ran out 2 months ago so HP Support wasn't very supportive.

    Hi,
    Pleae try the following instructions:
        http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&docname=bpu02032
    Other option using Word:
       http://www.techrepublic.com/blog/windows-and-office/quick-tip-flip-text-for-a-mirror-image-in-word/#...
    My suggestion: flip image before print. You can use a photo editor to flip images.
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

Maybe you are looking for

  • Error in to_date

    Hi, I am getting an error on the below query, in the "to_date" function part. select *   from rf_bankaccount_avg t where t.month_year between        to_char(to_date((SELECT ADD_MONTHS(LAST_DAY(SYSDATE), -7) + 1 AS FROM dual),'mm-yyyy')) and        to

  • Can't get my o/b network working ???

    Everything working fine till i plug in the network cable to the onboard LAN. It says network cable not connected and when I click repair it shows "Windows renewing Ip address" which it never succeeds in doing ????? I've got the Win XP SP2 standard fi

  • Default data for article master -Purchasing/Logistics view

    Hello, What is the difference between below configuration settings: 1. Logistics general --> Basic data retail --> General control, retail master data --> tab Control parameters for article master --> field 'vendor default data' 2. Logistics general

  • Portal Error 404 (The requested resource is not available)

    Dear, I have faced the below error in our Portal (6.0), I have created a new role that its linked normally with worksets, pages and i-view, all the way to custom SAP R/3 transactions, most of the users are able to see and execute these transactions,

  • Zero Decimal values in AL11 file download

    Hi Experts, We have a program to download data into XLS file in AL11 application server. We have a currency column to be passed on to the file. The issue here is I have a decimal value like 201.30 and 200.00 but these values are downloading in AL11 a