Office Jet 8600 Premium unable to set printer as default. Error 0x00000709

Have NEVER been Able to make my new OJ 8600 Premium the default printer--Win7x64 Ultimate, McAfee, MSOffice All Updated.  This is less than 30 days old!!!!
Installs and seems to be fully functional, Prints a Test Page, & Scans using YOUR software, BUT:
Will Not Scan Normally from Acrobat as it will not recognize  (still has my HP 6500 listed which is UNINSTALLED & Registry cleaned )  Can scan using Custom Settings (WT*?!!)
Outlook & Excel "sees" the printer BUT will NOT print  Fails to connect.
Checked & cleaned registry of OLD printer info then rebooted as indicated in some of the forums.  STILL 0x00000709
Took offline and tried a direct connect using the USB port.  Rebooted all and still 0x00000709
I thought initially it was just me.  BUT, this is ALL OVER THE INTERNET, and NOT just on the 8600.
I am about to put the 8600 back in the box WITHOUT the packing and SEND it BACK.  OVER 20 years with HP, BUT I have HAD IT!

Hey MHz67,
This error is coming from the Windows OS itself and is most likely coming from an issue with your Print Spooler service.  I would advise trying to run the Microsoft Fixit tool for automatically detecting and fixing printing problems.
http://support.microsoft.com/mats/printing_problem​s/
Once this has run are you able to get the printer to be set as default and function?
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------
I am not an HP employee.

Similar Messages

  • My HP Office Jet 6700 Premium has suddenly stopped printing from my iPad

    I have a new HP Office Jet 6700 Premium
    It had been working just fine, wireless printing from my iPad.
    iPad shows a window that recognizes the printer, but it does not print.
    There is no error message.
    This question was solved.
    View Solution.

    The steps below typically resolve the issue you’re experiencing:
    1. Power off the printer.
    2. Completely power off the iOS devices (hold the Sleep and Home buttons simultaneously until a message appears asking you to "Slide to power off". Slide across that bar, and it should completely power off).
    3. Power the printer back on.
    4. Power the iOS devices back on.
    5. Try to print again.
    Those steps usually resolve the issue. If they do not, try this additional steps:
    6. Power cycle your router (usually done by unplugging the router’s power cord, waiting 20 seconds, and plugging it back in).
    7. Make sure that the iOS devices and the printer are all connected to the same network, then try to print.
    If I have SOLVED your issue, please feel free to provide KUDOS and make sure you mark this thread as SOLUTION PROVIDED!
    Although I work for HP, my posts and replies are my own opinion and not those of HP.

  • Two Sided Printing with  HP Office Jet 8600

    I have installed an HP Office Jet 8600 N911A  The two sided printing feature is not functioning.  HP's website offered instructions on the OX 10.6 system, but not 10.7.3

    Hello,
    You should be able to print on two sides using this method for your product:
    NOTE:You can print your document on both sides of the paper, instead of just one side. Click on the Advanced button on the Paper/Quality or Layout tab. From the Pages to Print drop-down menu select Print Odd Pages Only . Click OK to print. After the odd numbered pages of the document have been printed, remove the document from the output tray. Reload the paper in the input tray with the blank side facing up. Return to the Pages to Print drop-down menu and then select Print Even Pages Only . Click OK to print.
    Reference link:
    http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02250284&tmp_task=useCategory&cc=us&dlc=en&lang...
    Hope this helps.
    I work for HP.

  • Wireless is not working on my new HP office jet 6700 premium

    Gents,
    i have a new HP office jet 6700 premium all in one printer and i coneccted to the network via wireless and its works only for 2 minutes and after that its not working via wireless unless i disconnected and reconected again please advice.
    FYI it is working very good by USB, and im using Mac OS X 10.9.3 version 
    Regards,

    Hi Kattoa,
    Welcome to the HP forums!
    I'm sorry to hear your Officejet 6700  doesn't seem to be holding it's wireless connection but I'd be happy to help determine what the problem could be
    I think it would be best if you followed this Printer Does Not Maintain Wireless Connection document as it should be able to help determine why the printer has to be reconnected so frequently.
    Let me know how that goes for you!!
    Please click “Accept as Solution ” if you feel my post resolved your issue, as it will help others find the solution faster
    Click the “Kudos Thumbs Up" on the right to say “Thanks” for helping!
    **MissTeriLynn**
    I work on behalf of HP

  • What do I use as a password to link my Ipad to my HP Office Jet 8600?

    I just bought an e-print (HP Office Jet 8600 pro) so I could print w/my Ipad, what Password do I use w/Ipad to connect the 2?

    Hi,
    It supports Airprint, your iPad should be able to find it otherwise please use the following setup.
      http://www.apple.com/support/ipad/assistant/airprint/
    Regards.
    BH
    **Click the KUDOS thumb up on the left to say 'Thanks'**
    Make it easier for other people to find solutions by marking a Reply 'Accept as Solution' if it solves your problem.

  • Cant set up my HP office jet 8600 printer with my iPad mini

    Can't set my HP office jet 8600 printer with my iPad mini

    That is not an AirPrint supported printer. Check for compatibility here: http://support.apple.com/kb/HT4356
    Check the App Store for an HP app that may provide limited printing functionality. Alternatively, you can use your computer as a wireless print server using an app like Printopia. Note that your computer must be on and able to print for this solution to work.

  • Dissatisfi​ed with HP Office jet 6700 Premium Printer

    I've had a HP Office Jet 6700 Premium Printer for 18 months and have encountered a failed printer head issue which essentially requires full replacement of the printer.  I've seen many other similar reports by others which clearly indicates this printer has a serious problem with the printer heads.  I'm getting ready to replace this printer, which is just 6 months out of warranty, and will seek another vendor to provide printing equipment.  Very disappointed in HP's printer product and will gladly provide input to help others avoid running into this problem.

    Please read this post then provide some details.   What operating system?  What are the error messages on the printer or computer screen?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Office jet 8600 won't scan more than one page

    My Office jet 8600 will only scan one page at a time.  It doesn't matter if I use the document feeder or put the document on the glass.  When the scanner asks if I have another page I select yes and then I receive a message telling me the scanner is already in use and can't scan another page.  I have talked to HP tech support twice and downloaded new drivers.  The scanner worked perfectly until the last few days when it started having this problem.  HP tech support was not able to help.

    Hi @LonghornJack 
    I am really not certain what would cause the message stating that the printer is in use when you try to scan a second page, but running the Print and Scan Doctor might help. The HP Print and Scan Doctor is a free utility (tool) that helps to quickly resolve common printing, scanning and connectivity issues including but not limited to:
    Connectivity:
    USB: Verifies that the USB connection from your computer to the HP product is working correctly.
    Network: Verifies that the network connection between your computer and your network is working correctly.
    Device Status Test: Checks for device errors such as out of paper, paper jams, carriage stalls, and paper feed issues, and then provides instructions for fixing the error.
    Driver Check: Checks for missing or corrupt driver files.
    Device Manager: Checks for problems in Device Manager that would prevent printing.
    Device Online: Checks if the product has been paused or set to offline, and then sets the status back to online if necessary.
    Print Queue: Checks for and clears pending print jobs in the print queue (a log of print jobs waiting to print).
    Port Match: Checks the port settings for the HP product.
    Device Conflicts: Checks for conflicts with other drivers, such as other printer brands.
    Ink Issues: Checks the cartridges and ink levels for issues that affect print quality.
    Print Settings: Checks and adjusts the print quality settings.
    Test Print: Prints a test page for print quality evaluation, and provides options for cleaning and aligning the printhead if necessary.
    Scan Tests: Checks the scan mechanism, drivers, and registry entries.
    Source:Try the HP Print and Scan Doctor for Windows
    Click here to download and run the Print and Scan Doctor >>>>> www.hp.com/go/tools
    If this does not resolve the issue, post back and let me know if there are any symbols other than green check marks and what they are next to of course. The wrench is not always easy to spot as the wrench and the check mart are in the green circle.
    If you see only green check marks (), the tool did not find any problems.
    If you see green wrenches (), the utility identified an issue and corrected it automatically.
    If you see yellow exclamation points (), the test failed and required user action, but the step was skipped.
    If you see a red X (), follow the on-screen instructions to resolve the issue.
    I look forward to hearing back from you.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • Office Jet Pro 6835 all-in-one printer

    I recently purchased an Office Jet Pro 6835 all-in-one printer.  It has stopped printing and displays the error message "there is a problem with the printhead".  Is this by any chance an indication I am already out of ink?  I don't want to assume this and waste $100 on ink cartridges....Thanks for any help or suggestions

    HI RODA80,
    Welcome to the HP support forums.  I understand that when you are printing a multiple page document on your Officejet Pro 8500a that only the first 2 pages print.
    To better understand the issue would you please provide some further information:
    1)    What operating system are you using (Windows 7, Mac 10.8, or Windows 8, etc)?
    2)    Is this happening for all multiple page documents or just one?
    3)    Has a default of only printing the first 2 pages been accidentally set?
    Thank you.
    Regards,
    Happytohelp01
    Please click on the Thumbs Up on the right to say “Thanks” for helping!
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    I work on behalf of HP

  • New hp office jet 8600 was perfect until error message appeared

    new hp office jet 8600 was perfect until this weekend when message appeared that the printhead was either missing, incorrectly installed, incompatible or not detected.. Windows XP.    N911A Series

    Follow the instructions on this page to remove and re-seat the printhead: http://h10025.www1.hp.com/ewfrf/wc/document?docname=c03096304&tmp_task=solveCategory&cc=us&dlc=en&la...
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Error code 242 on Office jet 8600

    Office Jet 8600 quite accepting fax's. Error code 242, but fax test show all connections are good.

    Hi @Skylek
    According to the following document, error 242 means the remote fax machine is attempting to receive instead of send. Both machines have attempted to start a reception at the same time. On many fax machines, it is possible to accidentally initiate a fax reception in the following cases:
    There is no paper in the machine.
    The paper is not correctly loaded and the document sensor cannot sense it.
    Interpreting Error Codes in Fax Communication Error or Fax History Reports
    Recommended Solution:
    Contact the sender to make sure that a document is ready and correctly loaded in the sending fax machine. Also make sure that the remote machine is attempting to initiate a transmission and not a reception.
    I hope this helps.
    Please click the Thumbs up icon below to thank me for responding.
    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Sunshyn2005 - I work on behalf of HP

  • HP LaserJet Pro M1536dnf Multifunction Printer (unable to add print driver hpfax1, error code 87)

    Hi, my printer HP LaserJet Pro M1536dnf Mfp, suddenly didnt work so i remove the printer, and downloaded a new driver  http://support.hp.com/us-en/drivers/selfservice/HP-LaserJet-Pro-M1536-Multifunction-Printer-series/3974271/model/3974278#Z7_3054ICK0KGTE30AQO5O3KA30R1 once dowloaded, i run it and uninstall the printer, restart my pc, and proceed to installing. but in the process of installing a error occurr, saying that "Unable to add printer, error code 87", and that " HP Toolbox FX has encountered an error and can not recover. once i click ok. it tells me to restart my pc and reinstall it again. i did it for 8x, and still with the same error. please help really need a help right now. as my boss is going to kill me

    Hey , Welcome to the HP Support Forums!
    I understand that you're getting the error 'Unable to add print driver hpfax1, error code 87' when installing your HP LaserJet Pro M1536dnf Multifunction Printer on your Windows 7 computer. I would like to assist you today with resolving this install issue. Thank you for including all of the troubleshooting steps that you have completed prior to reaching out for support. At this time I am going to walk you through some additional software and driver troubleshooting steps. Please follow all of the steps below.  If you're using your HP Laserjet through a USB Cable connection, please disconnect that cable now.  Step one: Remove Driver: 1. Click on your Start menu 2. Select Control Panel 3. Select Programs and Features 4. When Programs and Features opens a list of programs installed on your computer will populate. Click on the 'Installed ON' tab at the top to change the date so the recently installed items show at the top. This will make it easier to manually locate the three HP Laserjet items you need to uninstall.  5. Next, look for the HP LJ M1530 MFP Series HP Scan, HPLaserJetHelp_LearnCenter, and HP LaserJet Professional M1530 MFP Series. If you see any 3 of these, or all 3 of these items, please click on them and select Uninstall.   Once you have confirmed that those three items have been uninstalled, please close Programs and Features and proceed to the next step.   Step 2: Clear Temp Files:  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens, select Ctrl + A at the same time on your keyboard. Everything in this folder will now highlight.Select the 'delete' button on your keyboard. The Temp folder contains temporary internet files. No actual files or folders on your computer will be affected by deleting the Temp files. Should a Temp file still be used than you will automatically get the pop up to 'skip' that item.Close the Temp folder once it is emptiedRight click the Recycling Bin on your desktop and select Empty Recycling BinPlease proceed to the next step.    Step 3: Download Installer Package:  Please click here to download the Full Feature Installer package. Once the download is complete, click on the download to allow it to 'Run'An extraction should now automatically occur. Once the extraction is complete an installer window will open. Please close the installation window.  You do not want to run the installation at this time.   Step 4: Run Scrubber:  To ensure that no trace of the HP Software and Driver package remain on your computer, I am going to have you run a Scrubber built into the installer package for your printer.  Click on your Start menuIn the 'search programs and files' box located right above Start after you click on it, type %temp% and hit enter on your keyboardWhen the Temp folder opens locate the 7z folder. Click on this folder to open it. This is the HP Laserjet Installer Click on the Utilities folder under the 7z folderDouble left click on Scrubber. It is an application which should launch the HP Uninstaller. Please follow the onscreen prompts to complete the uninstaller.    Once the uninstall has completed please proceed to the next step. Be sure to Restart your computer if the uninstall process prompts you to.    Step 5: Check Print Server Properties:  Click on your Start menuClick on Devices and PrintersIn the Devices and Printers window look for your HP Laserjet. If you see it listed please right click on it and choose 'Delete' or 'Remove Device'. Next, click on any device listed under 'Printers and Faxes' once just to highlight itClick Print Server Properties at the top of the windowClick on the Drivers tabLook for your HP Laserjet driver. If you see it click on it and click Remove at the bottomClick Remove Driver OnlySelect OKSelect Apply and OK on the Print Server Properties windowClose Devices and Printers. Please proceed to the next step.  Step 6: Run Disk Cleanup Utility: Click on your Start menuSelect All ProgramsSelect AccessoriesSelect System ToolsSelect Disk Cleanup Run a Disk Cleanup on the C DriveWhen prompted, check Downloaded Program files, Temporary Internet Files, Recycle Bin, Temporary Files, and Thumbnails Once the Disk Cleanup is complete, please proceed to the next step.    Step 7: Run CCLeaner:  To ensure that there are no malicious files on your computer or Registry conflicts on your computer I am going to have you run a CCLeaner before we install your printer. Please click here to download the CCLeaner Tool. Once the website opens select the link at the top for 'Free Download'. Once the download is complete please complete the Scan. Should multiple malicious files be found you may need to run the Scan multiple times to remove all malicious files. Once your system comes back as clean, please proceed to the last step.    Step 8: Install Device:  Please click here to download the Full Feature Installer package for your HP LaserjetOnce the download is complete please allow the download to RunPlease follow the onscreen prompts to install your HP LaserjetIf using a USB Cable connection please do not plug in the USB Cable until the installer window prompts you to  Once the installation has completed successfully please test your machine to confirm that everything is functioning properly. Please respond to this post with the result of your troubleshooting. I look forward to hearing from you. Good luck!

  • Can't set printer as default. Error code 0x0000709

    HP3510 Deskjet printer instaled on Hp laptop running windows 7. Cannot set printer as default. Error code 0x0000709. Removed old computer and software
    This question was solved.
    View Solution.

    tgwright,
    Thank you for the additional info. With the print and scan doctor not locating any corrupted software/driver problems its time to look to the operating system itself. Others who have had similar issues with the same error indicate a corrupted registry key causing the problem:
    http://goo.gl/t94JG
    http://goo.gl/uejgi
    Beware these solutions indicate changing registry info (very dangerous if you do not know what you are doing). If you are not comfortable in the registry or have never been there before I would suggest seeking additional support in some fashion (Microsoft/Local IT/PC Repair service/etc).
    Best of Luck!
    You can say thanks by clicking the Kudos Star in my post. If my post resolves your problem, please mark it as Accepted Solution so others can benefit too.

  • Cannot print office jet 8600 from iphone

    Hello, I am using an Office Jet  pro 8600. Everything was running fine with printing wirelessly from our iPhones until we switched from an HP laptop to an iMac desktop. We are on a Hub for wireless internet. I have unplugged and restarted the wireless router twice and used the Wireless Wizard to reset the printer but still cannot print from our iPhones. We can  print wirelessly from the iMac. Any suggestions? Thank you for your help. 

    OK, if it works from the iMac, it should also work from the iPhone.  Are you sure your iPhone is connected to the wireless network?
    Say thanks by clicking "Kudos" "thumbs up" in the post that helped you.
    I am employed by HP

  • Hp Officejet Pro 8600 Premium - wireless home network printing from multiple devices

    We have a wireless home network with several desk tops, lap tops and tablets using the network for internet access. There is only one printer in the home, our hp Officejet pro 8600 Premium. Right now everyone who has access to the network can print. We want to prevent printing from specific devices while allowing printing from others. How do I password protect the printer so that only certain devices may print? Or alternatively, remotely prevent devices from printing?

    Well this is a little tricky.   You have a 'home' network so we assume you want everyone to print went they want.  If you are talking about 'guest' that come over and use the printer, the best thing is to get a router with a Guest Network which isolates your home network.
    That being said there is no 'password' you can put on the printer , however you can add security.
    Start/Devices and Printers/ Right click on your printer and select Printer Properties , select the Security Tab.  Now you can set security.
    Say thanks by clicking the Kudos Thumbs Up to the right in the post.
    If my post resolved your problem, please mark it as an Accepted Solution ...
    I worked for HP but now I'm retired!

Maybe you are looking for

  • How to create a new row for a VO based on values from another VO?

    Hi, experts. in jdev 11.1.2.3, How to create a new row for VO1 based on values from another VO2 in the same page? and in my use case it's preferable to do this from the UI rather than from business logic layer(EO). Also I have read Frank Nimphius' fo

  • How to view my back up files?

    Hello, I just upgraded to 2.1 software, and had to restore my phone from scratch (because back up was "corrupted") but now i don't have any of my camera roll pictures, i'm missing some application data, and several contacts! how can i get this back w

  • Works in Windows but exception in Linux

    I am using the following lines of code in Windows for the required encryption KeySpec keySpec = new PBEKeySpec(passPhrase.toCharArray(), this.salt, this.iterationCount); this.key = SecretKeyFactory.getInstance("PBEWithMD5AndDES").generateSecret(keySp

  • Scripting Workaround for Icons

    I am trying to find a  workaround for video in Bridge that does not display a thumbnail.  I can do a  screenshot and save as jpeg,  then set the jpeg and avi in a stack.   That way I get a thumbnail image if jpeg is on top.  Clicking on the  lower st

  • HttpClusterServlet

              I have made a domain with a cluster of 2 servers, they are on 2 physical machines,           on the third machine I have a admin server and a manadged server. On the manadged           server ( proxy server ) I have deployed a small web app